mirror of
https://github.com/yellowberryHN/redive.git
synced 2026-10-05 21:37:55 +03:00
33 lines
1.6 KiB
Markdown
33 lines
1.6 KiB
Markdown
# External Port Adapter
|
|
|
|
A 3D print made by Gregorovich that replaces the metal plate covering the cutout in the back for running wires.
|
|
|
|
This will allow you to connect Ethernet / HDMI to the cabinet without having permanent long trailing cables.
|
|
Uses all 6 screws from the original plate.
|
|
|
|
<figure markdown>
|
|
<figcaption>Much better than having cables hanging out!</figcaption>
|
|
</figure>
|
|
|
|
<figure markdown>
|
|
<figcaption>This is the plate the adapter replaces on your cab.</figcaption>
|
|
</figure>
|
|
|
|
## Required Materials
|
|
|
|
- A panel mounted HDMI extension cable (like [this one](https://www.amazon.com/dp/B01MXD15TE/))
|
|
- A panel mounted Ethernet extension cable (like [this one](https://www.amazon.com/dp/B07V8G8DF2))
|
|
- [Adapter STL](../../files/3d/WACCA-ExternalPortAdapter.stl)
|
|
|
|
## Instructions
|
|
|
|
Ensure the STL matches the spacing on the screw holes and port depth of the panel mounted extension cables
|
|
you bought (the ones listed are the ones it was designed for), then print the included adapter STL.
|
|
|
|
Screw the adapter together with the extension cables, remove all 6 screws on the original metal plate,
|
|
then route the extensions through the inside of the cab, screw the adapter in, and connect the cables to the ALLS.
|
|
|
|
The adapter has the ports angled, it is recommended to make the ports face downward, but it is up to you how you decide
|
|
to mount it.
|
|
|
|
There may be a new version of this adapter STL in the future that also includes a 3.5mm jack for external audio cables. |