Max/whowechina_musec_pico
1
0
Fork 0
mirror of https://github.com/whowechina/musec_pico.git synced 2026-09-22 22:37:55 +03:00
Code Issues Packages Projects Releases Wiki Activity

Plastic washer in guide

Browse Source
This commit is contained in:
whowechina
2024-10-22 21:38:19 +08:00
parent 65b5a9e2a2
commit 087300f61a
2 changed files with 9 additions and 5 deletions
Download Patch File Download Diff File Expand all files Collapse all files
README.md
+4 -3
View File
@@ -128,7 +128,8 @@ https://discord.gg/M8f2PPQFEA
* PTFE or UHMW tape for the sliding surfaces.
* Silicone anti-slip pads for the bottom.
<img src="doc/anti_slip_pads.jpg" width="60%">
* Optional but good to have: plastic washer (ring pads), 0.5mm thick, 2.1~2.5mm inner diameter, 5-10mm outer diameter.
https://www.amazon.com/Bclla-Zkenshan-washers-Shock-Proof-Leak-Proof-Insulation/dp/B091Y7H9NX/
* Optional but good to have: A digital piano or music keyboard sustain pedal or a sewing machine pedal with 3.5mm jack. If it comes with 6.25mm jack, you also need a 6.25mm to 3.5mm adapter.
#### Steps
@@ -152,9 +153,9 @@ https://discord.gg/M8f2PPQFEA
7. Connect the SH1.0 cables which are already connected to the main board to the sensor PCBs. And then push the lever shafts into the stands on the bottom housing. If you have keyboard lubricant, you can apply some to the shaft and the stand.
<img src="doc/assemble_lub.jpg" width="60%">
Optional: a pair of plastic ring pads will be helpful to prevent the level from moving. It's 0.5mm thick, 2.1~2.5mm inner diameter, 5-10mm outer diameter.
A pair of plastic washer will be helpful to prevent the lever from moving. They can also be used to adjust the lever position, compensating for the printing tolerance.
<img src="doc/assemble_limiter.jpg" width="60%">
<img src="doc/assemble_8.jpg" width="80%">
<img src="doc/assemble_8.jpg" width="80%">
8. Install the button pads using M3*8mm screws.
<img src="doc/assemble_9.jpg" width="80%">
README_CN.md
+5 -2
View File
@@ -126,6 +126,8 @@ https://discord.gg/M8f2PPQFEA
* 用于滑动表面的 PTFE 或 UHMW 胶带。
* 底部的硅胶防滑垫。
<img src="doc/anti_slip_pads.jpg" width="60%">
* 可选，但很有用：硬塑料垫片（环垫），0.5mm 厚，2.1~2.5mm 内径，5-10mm 外径。
https://www.amazon.com/Bclla-Zkenshan-washers-Shock-Proof-Leak-Proof-Insulation/dp/B091Y7H9NX/
* 可选，但很有用：数字钢琴或音乐键盘的延音踏板或带有 3.5mm 插孔的缝纫机踏板。如果带的是 6.25mm 插头，那你还需要一个 6.25mm 到 3.5mm 的转接头。
#### 步骤
@@ -149,9 +151,10 @@ https://discord.gg/M8f2PPQFEA
7. 将已经连接到主板的 SH1.0 电线连接到传感器 PCB 上。然后将杆轴推入底壳上的支架。如果你有键盘润滑剂，你可以涂一些在轴和支架上。
<img src="doc/assemble_lub.jpg" width="60%">
可选：一对塑料垫片将有助于防止平衡杆移动，合适的厚度是 0.5mm，内径是 2.1~2.5mm，外径是 5-10mm。
塑料垫片将有助于防止平衡杆移动，它也可以用来调整平衡杆的水平位置来补偿打印的公差。
https://www.amazon.com/Bclla-Zkenshan-washers-Shock-Proof-Leak-Proof-Insulation/dp/B091Y7H9NX/
<img src="doc/assemble_limiter.jpg" width="60%">
<img src="doc/assemble_8.jpg" width="80%">
<img src="doc/assemble_8.jpg" width="80%">
8. 使用 M3\*8mm 螺丝将按键托底固定。
<img src="doc/assemble_9.jpg" width="80%">