Max/spice2x_spice2x.github.io
1
0
Fork 0
mirror of https://github.com/spice2x/spice2x.github.io.git synced 2026-10-03 20:27:58 +03:00
Code Issues Packages Projects Releases Wiki Activity

Updated Touch screens (markdown)

bicarus
2026-07-24 16:37:40 -07:00
parent 76a2801b94
commit 5c1b88ee01
1 changed files with 2 additions and 2 deletions
Download Patch File Download Diff File Expand all files Collapse all files
Touch-screens.md
+2 -2
@@ -10,6 +10,8 @@ This page is about physical touchscreen monitors connected over HDMI/DisplayPort
While RB cabs technically use a 27" monitor, the visible gameplay area is only about 21 inches (54cm diagonal). If your monitor is larger than 21", you can use the combination of `Screen Resize` feature and `RB Scale Touch Input (-rbscaletouch)` to match the cab dimensions. Do note that the screen resolution varies depending on the version (Reflesia is 768x1280, Volzza 2 is 1080p) so you may need to use `Screen Resize Config Path (-resizecfgpath)` to store version-specific scaling options.
RB cabinets use high-frequency polling of IR sensor grid, which means you may see dropped inputs when holding two or more fingers! If you use two fingers to hold touch points [X1, Y1] and [X2, Y2], game cannot recognize another touch point near [X1, Y2] and [X2, Y1]. This is an issue on real cabs too, you just gotta live with it, or learn to play around it; it's a limitation of IR sensor grid technology.
RB requires you to do upward flick motions, which often fails to register when playing with capacitive touch screens. The game engine expects a long & quick swipe motion, which is possible on IR grids with high poll rate, but more difficult to detect on capacitive screens. You don't need to flick straight upwards, you can do a side swipe (slightly angled toward opponent) or a complete downward swipe, which is easier on your fingers.
If you have issues with touch, try the following:
@@ -19,8 +21,6 @@ If you have issues with touch, try the following:
If you're using a touch screen to play, it must be set as the primary monitor.
RB cabinets use high-frequency polling of IR sensor grid, which means you may see dropped inputs when holding two or more fingers! If you use two fingers to hold touch points [X1, Y1] and [X2, Y2], game cannot recognize another touch point near [X1, Y2] and [X2, Y1]. This is an issue on real cabs too, you just gotta live with it, or learn to play around it; it's a limitation of IR sensor grid technology.
In test menu, in touch screen test option where it shows the touch points, the lines may seem misaligned near the edges. This is actually normal and happens on the cab too; this should not affect in-game detection logic. Instead, try `-rbtouchdebug`.
### BeatStream, Nostalgia