Update version

Fixes #1835

README.md

@@ -31,6 +31,7 @@ Read the [Contributing Guide](https://github.com/earlephilhower/arduino-pico/blo
 * Cytron Maker Pi RP2040
 * Cytron Maker Nano RP2040
 * DatanoiseTV PicoADK+
+* Degz Suibo RP2040
 * DeRuiLab FlyBoard2040 Core
 * DFRobot Beetle RP2040
 * ElectronicCats Hunter Cat NFC
@@ -52,6 +53,10 @@ Read the [Contributing Guide](https://github.com/earlephilhower/arduino-pico/blo
 * Pimoroni PGA2040
 * Pimoroni Plasma2040
 * Pimoroni Tiny2040
+* RAKwireless RAK11300
+* Redscorp RP2040-Eins
+* Redscorp RP2040-ProMini
+* Sea-Picro
 * Seeed Indicator RP2040
 * Seeed XIAO RP2040
 * Silicognition RP2040-Shim
@@ -69,7 +74,6 @@ Read the [Contributing Guide](https://github.com/earlephilhower/arduino-pico/blo
 * WIZnet W5100S-EVB-Pico
 * WIZnet W5500-EVB-Pico
 * WIZnet WizFi360-EVB-Pico
-* Redscorp RP2040-ProMini
 * Generic (configurable flash, I/O pins)
 
 # Installing via Arduino Boards Manager

cores/rp2040/BluetoothDebug.cpp

@@ -0,0 +1,87 @@
+/*
+    Enable BTStack debugging to a Print-able object
+
+    Copyright (c) 2023 Earle F. Philhower, III <earlephilhower@yahoo.com>
+
+    This library is free software; you can redistribute it and/or
+    modify it under the terms of the GNU Lesser General Public
+    License as published by the Free Software Foundation; either
+    version 2.1 of the License, or (at your option) any later version.
+
+    This library is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+    Lesser General Public License for more details.
+
+    You should have received a copy of the GNU Lesser General Public
+    License along with this library; if not, write to the Free Software
+    Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#if defined(ENABLE_CLASSIC) || defined(ENABLE_BLE)
+#include <Arduino.h>
+#include <btstack.h>
+#include <hci_dump.h>
+
+static Print *_print;
+
+static void _log_packet(uint8_t packet_type, uint8_t in, uint8_t *packet, uint16_t len) {
+    if (!_print) {
+        return;
+    }
+    _print->printf("[BT @%lu] ", millis());
+
+    switch (packet_type) {
+    case HCI_COMMAND_DATA_PACKET:
+        _print->printf("CMD => ");
+        break;
+    case HCI_EVENT_PACKET:
+        _print->printf("EVT <= ");
+        break;
+    case HCI_ACL_DATA_PACKET:
+        _print->printf("ACL %s ", in ? "<=" : "=>");
+        break;
+    case HCI_SCO_DATA_PACKET:
+        _print->printf("SCO %s ", in ? "<=" : "=>");
+        break;
+    case HCI_ISO_DATA_PACKET:
+        _print->printf("ISO %s ", in ? "<=" : "=>");
+        break;
+    case LOG_MESSAGE_PACKET:
+        _print->printf("LOG -- %s\n", (char*) packet);
+        return;
+    default:
+        _print->printf("UNK(%x) %s ", packet_type, in ? "<=" : "=>");
+        break;
+    }
+
+    for (uint16_t i = 0; i < len; i++) {
+        _print->printf("%02X ", packet[i]);
+    }
+    _print->printf("\n");
+}
+
+static void _log_message(int log_level, const char * format, va_list argptr) {
+    (void)log_level;
+    char log_message_buffer[HCI_DUMP_MAX_MESSAGE_LEN];
+    if (!_print) {
+        return;
+    }
+    vsnprintf(log_message_buffer, sizeof(log_message_buffer), format, argptr);
+    _print->printf("[BT @%lu] LOG -- %s\n", millis(), log_message_buffer);
+}
+
+
+static const hci_dump_t hci_dump_instance = {
+    NULL,
+    _log_packet,
+    _log_message
+};
+
+
+void __EnableBluetoothDebug(Print &print) {
+    _print = &print;
+    hci_dump_init(&hci_dump_instance);
+}
+
+#endif

cores/rp2040/RP2040Support.h

@@ -157,6 +157,10 @@ extern RP2040 rp2040;
 extern "C" void main1();
 extern "C" char __StackLimit;
 extern "C" char __bss_end__;
+extern "C" void setup1() __attribute__((weak));
+extern "C" void loop1() __attribute__((weak));
+extern "C" bool core1_separate_stack;
+extern "C" uint32_t* core1_separate_stack_address;
 
 class RP2040 {
 public:
@@ -238,6 +242,25 @@ public:
         return &__StackLimit  - &__bss_end__;
     }
 
+    inline uint32_t getStackPointer() {
+        uint32_t *sp;
+        asm volatile("mov %0, sp" : "=r"(sp));
+        return (uint32_t)sp;
+    }
+
+    inline int getFreeStack() {
+        const unsigned int sp = getStackPointer();
+        uint32_t ref = 0x20040000;
+        if (setup1 || loop1) {
+            if (core1_separate_stack) {
+                ref = cpuid() ? (unsigned int)core1_separate_stack_address : 0x20040000;
+            } else {
+                ref = cpuid() ? 0x20040000 : 0x20041000;
+            }
+        }
+        return sp - ref;
+    }
+
     void idleOtherCore() {
         fifo.idleOtherCore();
     }

cores/rp2040/RP2040USB.cpp

@@ -83,6 +83,8 @@ static int __usb_task_irq;
   9, TUSB_DESC_INTERFACE, _itfnum, 0, 0, TUSB_CLASS_VENDOR_SPECIFIC, RESET_INTERFACE_SUBCLASS, RESET_INTERFACE_PROTOCOL, _stridx,
 
 
+int usb_hid_poll_interval __attribute__((weak)) = 10;
+
 const uint8_t *tud_descriptor_device_cb(void) {
     static tusb_desc_device_t usbd_desc_device = {
         .bLength = sizeof(tusb_desc_device_t),
@@ -263,7 +265,7 @@ void __SetupUSBDescriptor() {
         uint8_t hid_itf = __USBInstallSerial ? 2 : 0;
         uint8_t hid_desc[TUD_HID_DESC_LEN] = {
             // Interface number, string index, protocol, report descriptor len, EP In & Out address, size & polling interval
-            TUD_HID_DESCRIPTOR(hid_itf, 0, HID_ITF_PROTOCOL_NONE, hid_report_len, EPNUM_HID, CFG_TUD_HID_EP_BUFSIZE, 10)
+            TUD_HID_DESCRIPTOR(hid_itf, 0, HID_ITF_PROTOCOL_NONE, hid_report_len, EPNUM_HID, CFG_TUD_HID_EP_BUFSIZE, (uint8_t)usb_hid_poll_interval)
         };
 
         uint8_t msd_itf = interface_count - 1;
@@ -400,7 +402,7 @@ bool __USBHIDReady() {
 
     while (((millis() - start) < timeout) && tud_ready() && !tud_hid_ready()) {
         tud_task();
-        delay(1);
+        delayMicroseconds(1);
     }
     return tud_hid_ready();
 }

cores/rp2040/RP2040Version.h

@@ -1,5 +1,5 @@
 #pragma once
 #define ARDUINO_PICO_MAJOR 3
 #define ARDUINO_PICO_MINOR 6
-#define ARDUINO_PICO_REVISION 0
-#define ARDUINO_PICO_VERSION_STR "3.6.0"
+#define ARDUINO_PICO_REVISION 1
+#define ARDUINO_PICO_VERSION_STR "3.6.1"

cores/rp2040/SerialUSB.cpp

@@ -197,6 +197,14 @@ static void CheckSerialReset() {
     }
 }
 
+bool SerialUSB::dtr() {
+    return _dtr;
+}
+
+bool SerialUSB::rts() {
+    return _rts;
+}
+
 extern "C" void tud_cdc_line_state_cb(uint8_t itf, bool dtr, bool rts) {
     (void) itf;
     _dtr = dtr ? true : false;

cores/rp2040/SerialUSB.h

@@ -43,6 +43,8 @@ public:
     virtual size_t write(const uint8_t *p, size_t len) override;
     using Print::write;
     operator bool() override;
+    bool dtr();
+    bool rts();
 
     void ignoreFlowControl(bool ignore = true);
 

cores/rp2040/main.cpp

@@ -27,6 +27,7 @@
 RP2040 rp2040;
 extern "C" {
     volatile bool __otherCoreIdled = false;
+    uint32_t* core1_separate_stack_address = nullptr;
 };
 
 extern void setup();
@@ -38,12 +39,14 @@ extern void startFreeRTOS() __attribute__((weak));
 bool __isFreeRTOS;
 volatile bool __freeRTOSinitted;
 
+extern void __EnableBluetoothDebug(Print &);
 
 // Weak empty variant initialization. May be redefined by variant files.
 void initVariant() __attribute__((weak));
 void initVariant() { }
 
 // Optional 2nd core setup and loop
+bool core1_separate_stack __attribute__((weak)) = false;
 extern void setup1() __attribute__((weak));
 extern void loop1() __attribute__((weak));
 extern "C" void main1() {
@@ -117,6 +120,9 @@ extern "C" int main() {
 #if defined DEBUG_RP2040_PORT
     if (!__isFreeRTOS) {
         DEBUG_RP2040_PORT.begin(115200);
+#if (defined(ENABLE_BLUETOOTH) || defined(ENABLE_BLE)) && defined(DEBUG_RP2040_BLUETOOTH)
+        __EnableBluetoothDebug(DEBUG_RP2040_PORT);
+#endif
     }
 #endif
 
@@ -132,7 +138,12 @@ extern "C" int main() {
     if (!__isFreeRTOS) {
         if (setup1 || loop1) {
             delay(1); // Needed to make Picoprobe upload start 2nd core
-            multicore_launch_core1(main1);
+            if (core1_separate_stack) {
+                core1_separate_stack_address = (uint32_t*)malloc(0x2000);
+                multicore_launch_core1_with_stack(main1, core1_separate_stack_address, 0x2000);
+            } else {
+                multicore_launch_core1(main1);
+            }
         }
         setup();
         while (true) {

cores/rp2040/posix.cpp

@@ -33,7 +33,9 @@
 
 extern "C" int errno;
 
-extern "C" ssize_t _write(int fd, const void *buf, size_t count) {
+extern "C"
+__attribute((weak))
+ssize_t _write(int fd, const void *buf, size_t count) {
 #if defined DEBUG_RP2040_PORT
     (void) fd;
     return DEBUG_RP2040_PORT.write((const char *)buf, count);
@@ -45,7 +47,9 @@ extern "C" ssize_t _write(int fd, const void *buf, size_t count) {
 #endif
 }
 
-extern "C" int _chown(const char *path, uid_t owner, gid_t group) {
+extern "C"
+__attribute((weak))
+int _chown(const char *path, uid_t owner, gid_t group) {
     (void) path;
     (void) owner;
     (void) group;
@@ -53,7 +57,9 @@ extern "C" int _chown(const char *path, uid_t owner, gid_t group) {
     return -1;
 }
 
-extern "C" int _close(int fd) {
+extern "C"
+__attribute((weak))
+int _close(int fd) {
     (void) fd;
     errno = ENOSYS;
     return -1;
@@ -72,7 +78,9 @@ extern "C" int _fork(void) {
     return -1;
 }
 
-extern "C" int _fstat(int fd, struct stat *st) {
+extern "C"
+__attribute((weak))
+int _fstat(int fd, struct stat *st) {
     (void) fd;
     (void) st;
     errno = ENOSYS;
@@ -115,7 +123,9 @@ extern "C" void __setSystemTime(unsigned long long sec, unsigned long usec) {
     __timedelta_us = newnow_us - now_us;
 }
 
-extern "C" int _isatty(int file) {
+extern "C"
+__attribute((weak))
+int _isatty(int file) {
     (void) file;
     errno = ENOSYS;
     return 0;
@@ -128,14 +138,18 @@ extern "C" int _kill(int pid, int sig) {
     return -1;
 }
 
-extern "C" int _link(char *existing, char *newlink) {
+extern "C"
+__attribute((weak))
+int _link(char *existing, char *newlink) {
     (void) existing;
     (void) newlink;
     errno = ENOSYS;
     return -1;
 }
 
-extern "C" int _lseek(int   file, int   ptr, int   dir) {
+extern "C"
+__attribute((weak))
+int _lseek(int   file, int   ptr, int   dir) {
     (void) file;
     (void) ptr;
     (void) dir;
@@ -143,7 +157,9 @@ extern "C" int _lseek(int   file, int   ptr, int   dir) {
     return -1;
 }
 
-extern "C" int _open(char *file, int   flags, int   mode) {
+extern "C"
+__attribute((weak))
+int _open(char *file, int   flags, int   mode) {
     (void) file;
     (void) flags;
     (void) mode;
@@ -151,7 +167,9 @@ extern "C" int _open(char *file, int   flags, int   mode) {
     return -1;
 }
 
-extern "C" int _read(int   file, char *ptr, int   len) {
+extern "C"
+__attribute((weak))
+int _read(int   file, char *ptr, int   len) {
     (void) file;
     (void) ptr;
     (void) len;
@@ -159,7 +177,9 @@ extern "C" int _read(int   file, char *ptr, int   len) {
     return -1;
 }
 
-extern "C" int _readlink(const char *path, char *buf, size_t bufsize) {
+extern "C"
+__attribute((weak))
+int _readlink(const char *path, char *buf, size_t bufsize) {
     (void) path;
     (void) buf;
     (void) bufsize;
@@ -167,14 +187,18 @@ extern "C" int _readlink(const char *path, char *buf, size_t bufsize) {
     return -1;
 }
 
-extern "C" int _stat(const char  *file, struct stat *st) {
+extern "C"
+__attribute((weak))
+int _stat(const char  *file, struct stat *st) {
     (void) file;
     (void) st;
     errno = ENOSYS;
     return -1;
 }
 
-extern "C" int _symlink(const char *path1, const char *path2) {
+extern "C"
+__attribute((weak))
+int _symlink(const char *path1, const char *path2) {
     (void) path1;
     (void) path2;
     errno = ENOSYS;
@@ -187,7 +211,9 @@ extern "C" clock_t _times(struct tms *buf) {
     return -1;
 }
 
-extern "C" int _unlink(char *name) {
+extern "C"
+__attribute((weak))
+int _unlink(char *name) {
     (void) name;
     errno = ENOSYS;
     return -1;

docs/analog.rst

@@ -40,7 +40,9 @@ Analog Output Restrictions
 --------------------------
 
 The PWM generator source clock restricts the legal combinations of
-frequency and ranges.  For example, at 1MHz only about 6 bits of range
+frequency and ranges.  
+At a CPU frequency of 133MHz, the 16 bit maximum range decreases by 1 bit for every doubling of the default PWM frequency of 1 kHz.  
+For example, at 1MHz only about 6 bits of range
 are possible.  When you define an ``analogWriteFreq`` and ``analogWriteRange``
 that can't be fulfilled by the hardware, the frequency will be preserved
 but the accuracy (range) will be reduced automatically.  Your code will

docs/bearssl-server-secure-class.rst

@@ -13,7 +13,7 @@ Similar to the `BearSSL::WiFiClientSecure` method, sets the receive and transmit
 Setting Server Certificates
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-TLS servers require a certificate identifying itself and containing its public key, and a private key they will use to encrypt information with.  The application author is responsible for generating this certificate and key, either using a self-signed generator or using a commercial certification authority.  **Do not re-use the certificates included in the examples provided.**
+TLS servers require a certificate identifying itself and containing its public key, and a private key they will use to encrypt information with.  The application author is responsible for generating this certificate and key, either using a self-signed generator or using a commercial certification authority.  **Do not reuse the certificates included in the examples provided.**
 
 This example command will generate a RSA 2048-bit key and certificate:
 

docs/conf.py

@@ -54,9 +54,9 @@ author = u'Earle F. Philhower, III'
 # built documents.
 #
 # The short X.Y version.
-version = u'3.6.0'
+version = u'3.6.1'
 # The full version, including alpha/beta/rc tags.
-release = u'3.6.0'
+release = u'3.6.1'
 
 # The language for content autogenerated by Sphinx. Refer to documentation
 # for a list of supported languages.

docs/fs.rst

@@ -18,12 +18,12 @@ The following diagram shows the flash layout used in Arduino-Pico:
 
 ::
 
-    |---------------------|-------------|----|
-    ^                     ^             ^
-    Sketch                File system   EEPROM
+    |----|---------------------|-------------|----|
+    ^    ^                     ^             ^
+    OTA  Sketch                File system   EEPROM
 
-The file system size is configurable via the IDE menus, rom 64k up to 15MB
-(assuming you have an RP2040 boad with that much flash)
+The file system size is configurable via the IDE menus, from 64k up to 15MB
+(assuming you have an RP2040 board with that much flash)
 
 **Note:** to use any of file system functions in the sketch, add the
 following include to the sketch:
@@ -38,14 +38,14 @@ following include to the sketch:
 Compatible Filesystem APIs
 --------------------------
 
-LittleFS is an onboard filesystem that sets asidesome program flash for
+LittleFS is an onboard filesystem that sets aside some program flash for
 use as a filesystem without requiring any external hardware.
 
 SDFS is a filesystem for SD cards, based on [SdFat 2.0](https://github.com/earlephilhower/ESP8266SdFat).
 It supports FAT16 and FAT32 formatted cards, and requires an external
 SD card reader.
 
-SD is the Arduino supported, somewhat old and limited SD card filesystem.
+SD is the Arduino-supported, somewhat old and limited SD card filesystem.
 It is recommended to use SDFS for new applications instead of SD.
 
 All three of these filesystems can open and manipulate ``File`` and ``Dir``
@@ -75,22 +75,28 @@ Uploading Files to the LittleFS File System
 menu item to **Tools** menu for uploading the contents of sketch data
 directory into a new LittleFS flash file system.
 
+**IDE 1.x**
+
 -  Download the tool: https://github.com/earlephilhower/arduino-pico-littlefs-plugin/releases
--  In your Arduino sketchbook directory, create ``tools`` directory if
-   it doesn't exist yet.
--  Unpack the tool into ``tools`` directory (the path will look like
-   ``<home_dir>/Arduino/tools/PicoLittleFS/tool/picolittlefs.jar``)
+-  In your Arduino sketchbook directory, create ``tools`` directory if it doesn't exist yet.
+-  Unpack the tool into ``tools`` directory (the path will look like ``<home_dir>/Arduino/tools/PicoLittleFS/tool/picolittlefs.jar``)
    If upgrading, overwrite the existing JAR file with the newer version.
 -  Restart Arduino IDE.
 -  Open a sketch (or create a new one and save it).
 -  Go to sketch directory (choose Sketch > Show Sketch Folder).
--  Create a directory named ``data`` and any files you want in the file
-   system there.
+-  Create a directory named ``data`` and any files you want in the file system there.
 -  Make sure you have selected a board, port, and closed Serial Monitor.
--  Double check theSerial Monitor is closed.  Uploads will fail if the Serial
-   Monitor has control of the serial port.
--  Select ``Tools > Pico LittleFS Data Upload``. This should start
-   uploading the files into the flash file system.
+-  Double check the Serial Monitor is closed.  Uploads will fail if the Serial Monitor has control of the serial port.
+-  Select ``Tools > Pico LittleFS Data Upload``. This should start uploading the files into the flash file system.
+
+**IDE 2.x**
+
+-  Download the new tool: https://github.com/earlephilhower/arduino-littlefs-upload/releases
+-  Exit the IDE, if running
+-  Copy the VSIX file manually to (Linux/Mac) ``~/.arduinoIDE/plugins/`` (you may need to make this directory yourself beforehand) or to (Windows) ``C:\Users\<username>\.arduinoIDE\``
+-  Restart the IDE
+-  Double check the Serial Monitor is closed.  Uploads will fail if the Serial Monitor has control of the serial port.
+-  Enter ``[Ctrl]`` + ``[Shift]`` + ``[P]`` to bring up the command palette, then select/type ``Upload LittleFS to Pico/ESP8266``
 
 SD Library Information
 ----------------------
@@ -131,7 +137,7 @@ before mounting.  All filesystems have their own ``*Config`` (i.e.
 All filesystems allow explicitly enabling/disabling formatting when
 mounts fail.  If you do not call this ``setConfig`` method before
 perforing ``begin()``, you will get the filesystem's default
-behavior and configuration. By default, SPIFFS will autoformat the
+behavior and configuration. By default, LittleFS will autoformat the
 filesystem if it cannot mount it, while SDFS will not.
 
 begin
@@ -144,11 +150,10 @@ begin
 
 This method mounts file system. It must be called before any
 other FS APIs are used. Returns *true* if file system was mounted
-successfully, false otherwise.  With no options it will format SPIFFS
-if it is unable to mount it on the first try.
+successfully, false otherwise.
 
 Note that LittleFS will automatically format the filesystem
-if one is not detected.  This is configurable via ``setConfig``
+if one is not detected.  This is configurable via ``setConfig``.
 
 end
 ~~~
@@ -181,8 +186,8 @@ open
 
 Opens a file. ``path`` should be an absolute path starting with a slash
 (e.g. ``/dir/filename.txt``). ``mode`` is a string specifying access
-mode. It can be one of "r", "w", "a", "r+", "w+", "a+". Meaning of these
-modes is the same as for ``fopen`` C function.
+mode. It can be one of "r", "w", "a", "r+", "w+", "a+". The meaning of these
+modes is the same as for the ``fopen`` C function.
 
 ::
 
@@ -258,8 +263,6 @@ openDir
     or LittleFS.openDir(path)
 
 Opens a directory given its absolute path. Returns a *Dir* object.
-Please note the previous discussion on the difference in behavior between
-LittleFS and SPIFFS for this call.
 
 remove
 ~~~~~~

docs/install.rst

@@ -26,9 +26,7 @@ Arduino IDE Installation Warning
 the actual Arduino application because it has issues detecting attached Pico
 boards.  Use the "Windows ZIP" or plain "Windows" executable (EXE) download
 direct from https://arduino.cc. and allow it to install any device drivers
-it suggests.  Otherwise the Pico board may not be detected.  Also, if trying
-out the 2.0 beta Arduino please install the release 1.8 version beforehand
-to ensure needed device drivers are present.
+it suggests.  Otherwise the Pico board may not be detected.
 
 **Note for Linux Users**: If you installed the Arduino IDE using Flatpak, which 
 is common in Pop!_OS, Fedora, and Mint, among others, you may need to configure 
@@ -141,11 +139,13 @@ Uploading Filesystem Images
 ---------------------------
 The onboard flash filesystem for the Pico, LittleFS, lets you upload a filesystem image from the sketch directory for your sketch to use.  Download the needed plugin from
 
-* https://github.com/earlephilhower/arduino-pico-littlefs-plugin/releases
+* `IDE 1.x`: https://github.com/earlephilhower/arduino-pico-littlefs-plugin/releases
+* `IDE 2.x`: https://github.com/earlephilhower/arduino-littlefs-upload/releases
 
 To install, follow the directions in 
 
-* https://github.com/earlephilhower/arduino-pico-littlefs-plugin/blob/master/README.md 
+* `IDE 1.x`: https://github.com/earlephilhower/arduino-pico-littlefs-plugin/blob/master/README.md
+* `IDE 2.x`: https://github.com/earlephilhower/arduino-littlefs-upload/blob/main/README.md
 
 For detailed usage information, please check the repo documentation available at
 

docs/multicore.rst

@@ -16,6 +16,22 @@ not necessarily simultaneously!).
 See the ``Multicore.ino`` example in the ``rp2040`` example directory for a
 quick introduction.
 
+Stack Sizes
+-----------
+
+When the Pico is running in single core mode, core 0 has the full 8KB of stack
+space available to it.  When using multicore ``setup1``/``loop1`` the 8KB is split
+into two 4K stacks, one per core.  It is possible for core 0's stack to overwrite
+core 1's stack in this case, if you go beyond the 4K limitation.
+
+To allocate a separate 8K stack for core 1, resulting in 8K stacks being available
+for both cores, simply define the following variable in your sketch and set it
+to ``true``:
+
+.. code:: cpp
+
+    bool core1_separate_stack = true;
+
 Pausing Cores
 -------------
 

docs/serial.rst

@@ -55,3 +55,13 @@ void Serial.ignoreFlowControl(bool ignore)
 In some cases, the target application will not assert the DTR virtual line, thus preventing writing operations to succeed.
 
 For this reason, the SerialUSB::ignoreFlowControl() method disables the connection's state verification, enabling the program to write on the port, even though the data might be lost.
+
+bool Serial.dtr()
+~~~~~~~~~~~~~~~~~
+
+Returns the current state of the DTR virtual line. A USB CDC host (such as the Arduino serial monitor) typically raises the DTR pin when opening the device, and may lower it when closing the device.
+
+bool Serial.rts()
+~~~~~~~~~~~~~~~~~
+
+Returns the current state of the RTS virtual line.

docs/spi.rst

@@ -40,6 +40,6 @@ in order to consunme the received data and provide data to transmit.
 
 
 Examples
-========
+~~~~~~~~
 
 See the SPItoMyself example for a complete Master and Slave application.

docs/usb.rst

@@ -14,13 +14,28 @@ from the IDE.
 The Arduino-Pico core includes ported versions of the basic Arduino
 ``Keyboard``, ``Mouse`` and ``Joystick`` libraries.  These libraries 
 allow you to emulate a keyboard, a gamepad or mouse (or all together) 
-with the Pico in your sketches.
+with the Pico in your sketches.  These libraries only are available
+when using the built-in USB, not the Adafruit library.
 
 See the examples and Arduino Reference at
 https://www.arduino.cc/reference/en/language/functions/usb/keyboard/
 and
 https://www.arduino.cc/reference/en/language/functions/usb/mouse
 
+HID Polling Interval
+--------------------
+By default, HID devices will request to be polled every 10ms (i.e. 100x
+per second).  If you have a higher performance need, you can override
+this value by creating a global variable in your main application, set
+to the polling period:
+
+.. code::  cpp
+
+    int usb_hid_poll_interval = 1; // Set HID poll interval to 1ms (1kHz)
+    void setup() {
+        ....
+    }
+
 Adafruit TinyUSB Arduino Support
 --------------------------------
 Examples are provided in the Adafruit_TinyUSB_Arduino for the more

docs/wifintp.rst

@@ -5,7 +5,7 @@ NTP allows the Pico to set its internal clock using the internet, and is
 required for secure connections because the certificates used have valid
 date stamps.
 
-After ``WiFi.begin()`` use ``NTP.begin(s1)`` or ``NTP,begin(s1, s2)``  to
+After ``WiFi.begin()`` use ``NTP.begin(s1)`` or ``NTP.begin(s1, s2)``  to
 use one or two NTP servers (common ones are ``pool.ntp.org`` and
 ``time.nist.gov``) .
 

include/btstack_config.h

@@ -2,6 +2,7 @@
 
 // BTstack features that can be enabled
 #define ENABLE_LOG_INFO
+#define ENABLE_LOG_DEBUG
 #define ENABLE_LOG_ERROR
 #define ENABLE_PRINTF_HEXDUMP
 #define ENABLE_SCO_OVER_HCI

libraries/EEPROM/src/EEPROM.cpp

@@ -124,6 +124,7 @@ bool EEPROMClass::commit() {
     flash_range_program((intptr_t)_sector - (intptr_t)XIP_BASE, _data, _size);
     rp2040.resumeOtherCore();
     interrupts();
+    _dirty = false;
 
     return true;
 }

libraries/HID_Bluetooth/src/PicoBluetoothBLEHID.h

@@ -252,8 +252,10 @@ public:
     }
 
     bool send(void *rpt, int len) {
-        //wait for another report to be sent
-        while (_needToSend);
+        // Wait for another report to be sent
+        while (connected() && _needToSend) {
+            /* noop busy wait */
+        }
         _needToSend = true;
         _sendReport = rpt;
         _sendReportLen = len;

libraries/I2S/src/I2S.cpp

@@ -134,7 +134,7 @@ bool I2S::setSysClk(int samplerate) { // optimise sys_clk for desired samplerate
 }
 
 bool I2S::setMCLKmult(int mult) {
-    if (_running || !_isOutput) {
+    if (_running) {
         return false;
     }
     if ((mult % 64) == 0) {

libraries/Joystick/examples/Joystick-AllFunctions/Joystick-AllFunctions.ino

@@ -20,9 +20,9 @@ void loop() {
       Joystick.button(i, true);
       delay(250);
       Joystick.button(i, false);
-      delay(10); //we need a short delay here, sending packets with less than 1ms leads to packet loss!
+      delay(10); // We need a short delay here, sending packets with less than 1ms leads to packet loss!
     }
-    //alternativ with manual send:
+    // Alternative with manual send:
     Joystick.useManualSend(true);
     Serial.println("Joystick buttons - manual send");
     for (uint8_t i = 1; i <= 32; i++) {
@@ -33,8 +33,8 @@ void loop() {
     }
     Joystick.useManualSend(false);
 
-    //iterate all joystick axis
-    //Note: although you can use 0-1023 here (10bit), internally 8bits are used (-127 to 127)
+    // Iterate all joystick axis
+    // Note: although you can use 0-1023 here (10bit), internally 8bits are used (-127 to 127)
     Serial.println("Joystick X");
     for (uint16_t i = 0; i < 1023; i++) {
       Joystick.X(i);
@@ -71,8 +71,8 @@ void loop() {
       delay(20);
     } Joystick.hat(-1);
 
-    //use int8 mode for the axis.
-    //Note: hat is not used differently.
+    // Use int8 mode for the axis.
+    // Note: hat is not used differently.
     Serial.println("Now all axis in 8bit mode, -127 to 127");
     Joystick.use8bit(true);
     Serial.println("Joystick X");

libraries/JoystickBLE/examples/BLEJoystick-AllFunctions/BLEJoystick-AllFunctions.ino

@@ -20,9 +20,9 @@ void loop() {
       JoystickBLE.button(i, true);
       delay(250);
       JoystickBLE.button(i, false);
-      delay(10); //we need a short delay here, sending packets with less than 1ms leads to packet loss!
+      delay(10); // We need a short delay here, sending packets with less than 1ms leads to packet loss!
     }
-    //alternativ with manual send:
+    // Alternative with manual send:
     JoystickBLE.useManualSend(true);
     Serial.println("Joystick buttons - manual send");
     for (uint8_t i = 1; i <= 32; i++) {
@@ -33,8 +33,8 @@ void loop() {
     }
     JoystickBLE.useManualSend(false);
 
-    //iterate all joystick axis
-    //Note: although you can use 0-1023 here (10bit), internally 8bits are used (-127 to 127)
+    // Iterate all joystick axis
+    // Note: although you can use 0-1023 here (10bit), internally 8bits are used (-127 to 127)
     Serial.println("Joystick X");
     for (uint16_t i = 0; i < 1023; i++) {
       JoystickBLE.X(i);
@@ -71,8 +71,8 @@ void loop() {
       delay(20);
     } JoystickBLE.hat(-1);
 
-    //use int8 mode for the axis.
-    //Note: hat is not used differently.
+    // Use int8 mode for the axis.
+    // Note: hat is not used differently.
     Serial.println("Now all axis in 8bit mode, -127 to 127");
     JoystickBLE.use8bit(true);
     Serial.println("Joystick X");

libraries/JoystickBT/examples/BTJoystick-AllFunctions/BTJoystick-AllFunctions.ino

@@ -20,9 +20,9 @@ void loop() {
       JoystickBT.button(i, true);
       delay(250);
       JoystickBT.button(i, false);
-      delay(10); //we need a short delay here, sending packets with less than 1ms leads to packet loss!
+      delay(10); // We need a short delay here, sending packets with less than 1ms leads to packet loss!
     }
-    //alternativ with manual send:
+    // Alternative with manual send:
     JoystickBT.useManualSend(true);
     Serial.println("Joystick buttons - manual send");
     for (uint8_t i = 1; i <= 32; i++) {
@@ -33,8 +33,8 @@ void loop() {
     }
     JoystickBT.useManualSend(false);
 
-    //iterate all joystick axis
-    //Note: although you can use 0-1023 here (10bit), internally 8bits are used (-127 to 127)
+    // Iterate all joystick axis
+    // Note: although you can use 0-1023 here (10bit), internally 8bits are used (-127 to 127)
     Serial.println("Joystick X");
     for (uint16_t i = 0; i < 1023; i++) {
       JoystickBT.X(i);
@@ -71,8 +71,8 @@ void loop() {
       delay(20);
     } JoystickBT.hat(-1);
 
-    //use int8 mode for the axis.
-    //Note: hat is not used differently.
+    // Use int8 mode for the axis.
+    // Note: hat is not used differently.
     Serial.println("Now all axis in 8bit mode, -127 to 127");
     JoystickBT.use8bit(true);
     Serial.println("Joystick X");

libraries/LittleFS/src/LittleFS.h

@@ -106,7 +106,6 @@ public:
         if (!_mounted) {
             return false;
         }
-        info.maxOpenFiles = _maxOpenFds;
         info.blockSize = _blockSize;
         info.pageSize = _pageSize;
         info.maxOpenFiles = _maxOpenFds;

libraries/SPI/src/SPI.cpp

@@ -110,7 +110,6 @@ byte SPIClassRP2040::transfer(uint8_t data) {
         return 0;
     }
     data = (_spis.getBitOrder() == MSBFIRST) ? data : reverseByte(data);
-    spi_set_format(_spi, 8, cpol(), cpha(), SPI_MSB_FIRST);
     DEBUGSPI("SPI::transfer(%02x), cpol=%d, cpha=%d\n", data, cpol(), cpha());
     spi_write_read_blocking(_spi, &data, &ret, 1);
     ret = (_spis.getBitOrder() == MSBFIRST) ? ret : reverseByte(ret);
@@ -124,9 +123,12 @@ uint16_t SPIClassRP2040::transfer16(uint16_t data) {
         return 0;
     }
     data = (_spis.getBitOrder() == MSBFIRST) ? data : reverse16Bit(data);
-    spi_set_format(_spi, 16, cpol(), cpha(), SPI_MSB_FIRST);
     DEBUGSPI("SPI::transfer16(%04x), cpol=%d, cpha=%d\n", data, cpol(), cpha());
-    spi_write16_read16_blocking(_spi, &data, &ret, 1);
+    uint8_t d[2];
+    d[0] = (data >> 8) & 0xff;
+    d[1] = data & 0xff;
+    spi_write_read_blocking(_spi, d, d, 2);
+    ret = ((d[0] << 8) | (d[1] & 0xff)) & 0xffff;
     ret = (_spis.getBitOrder() == MSBFIRST) ? ret : reverse16Bit(ret);
     DEBUGSPI("SPI: read back %02x\n", ret);
     return ret;
@@ -153,8 +155,6 @@ void SPIClassRP2040::transfer(const void *txbuf, void *rxbuf, size_t count) {
 
     // MSB version is easy!
     if (_spis.getBitOrder() == MSBFIRST) {
-        spi_set_format(_spi, 8, cpol(), cpha(), SPI_MSB_FIRST);
-
         if (rxbuf == nullptr) { // transmit only!
             spi_write_blocking(_spi, txbuff, count);
             return;
@@ -191,6 +191,7 @@ void SPIClassRP2040::beginTransaction(SPISettings settings) {
         }
         DEBUGSPI("SPI: initting SPI\n");
         spi_init(_spi, _spis.getClockFreq());
+        spi_set_format(_spi, 8, cpol(), cpha(), SPI_MSB_FIRST);
         DEBUGSPI("SPI: actual baudrate=%u\n", spi_get_baudrate(_spi));
         _initted = true;
     }

libraries/Wire/src/Wire.cpp

@@ -262,6 +262,9 @@ size_t TwoWire::requestFrom(uint8_t address, size_t quantity, bool stopBit) {
 
     _buffLen = i2c_read_blocking_until(_i2c, address, _buff, quantity, !stopBit, make_timeout_time_ms(_timeout));
     if ((_buffLen == PICO_ERROR_GENERIC) || (_buffLen == PICO_ERROR_TIMEOUT)) {
+        if (_buffLen == PICO_ERROR_TIMEOUT) {
+            _handleTimeout(_reset_with_timeout);
+        }
         _buffLen = 0;
     }
     _buffOff = 0;
@@ -335,12 +338,32 @@ stop:
     return ack;
 }
 
+void TwoWire::_handleTimeout(bool reset) {
+    _timeoutFlag = true;
+
+    if (reset) {
+        if (_slave) {
+            uint8_t prev_addr = _addr;
+            int prev_clkHz = _clkHz;
+            end();
+            setClock(prev_clkHz);
+            begin(prev_addr);
+        } else {
+            int prev_clkHz = _clkHz;
+            end();
+            setClock(prev_clkHz);
+            begin();
+        }
+    }
+}
+
 // Errors:
 //  0 : Success
 //  1 : Data too long
 //  2 : NACK on transmit of address
 //  3 : NACK on transmit of data
 //  4 : Other error
+//  5 : Timeout
 uint8_t TwoWire::endTransmission(bool stopBit) {
     if (!_running || !_txBegun) {
         return 4;
@@ -352,6 +375,10 @@ uint8_t TwoWire::endTransmission(bool stopBit) {
     } else {
         auto len = _buffLen;
         auto ret = i2c_write_blocking_until(_i2c, _addr, _buff, _buffLen, !stopBit, make_timeout_time_ms(_timeout));
+        if (ret == PICO_ERROR_TIMEOUT) {
+            _handleTimeout(_reset_with_timeout);
+            return 5;
+        }
         _buffLen = 0;
         return (ret == len) ? 0 : 4;
     }
@@ -422,6 +449,20 @@ void TwoWire::onRequest(void(*function)(void)) {
     _onRequestCallback = function;
 }
 
+void TwoWire::setTimeout(uint32_t timeout, bool reset_with_timeout) {
+    _timeoutFlag = false;
+    Stream::setTimeout(timeout);
+    _reset_with_timeout = reset_with_timeout;
+}
+
+bool TwoWire::getTimeoutFlag() {
+    return _timeoutFlag;
+}
+
+void TwoWire::clearTimeoutFlag() {
+    _timeoutFlag = false;
+}
+
 #ifndef __WIRE0_DEVICE
 #define __WIRE0_DEVICE i2c0
 #endif

libraries/Wire/src/Wire.h

@@ -82,6 +82,10 @@ public:
     }
     using Print::write;
 
+    void setTimeout(uint32_t timeout = 25, bool reset_with_timeout = false);     // sets the maximum number of milliseconds to wait
+    bool getTimeoutFlag(void);
+    void clearTimeoutFlag(void);
+
     // IRQ callback
     void onIRQ();
 
@@ -96,6 +100,10 @@ private:
     uint8_t _addr;
     bool _txBegun;
 
+    bool _timeoutFlag;
+    bool _reset_with_timeout;
+    void _handleTimeout(bool reset);
+
     uint8_t _buff[WIRE_BUFFER_SIZE];
     int _buffLen;
     int _buffOff;

libraries/lwIP_Ethernet/src/LwipIntfDev.h

@@ -310,7 +310,7 @@ bool LwipIntfDev<RawDev>::begin(const uint8_t* macAddress, const uint16_t mtu) {
         return false;
     }
 
-    _phID = __addEthernetPacketHandler(std::bind(&LwipIntfDev<RawDev>::handlePackets, this));
+    _phID = __addEthernetPacketHandler([this] { this->handlePackets(); });
 
     if (localIP().v4() == 0) {
         // IP not set, starting DHCP

libraries/lwIP_enc28j60/src/utility/enc28j60.cpp

@@ -39,6 +39,7 @@
 #include <stdio.h>
 #include <stdarg.h>
 #include <string.h>
+#include <LwipEthernet.h>
 
 #include "enc28j60.h"
 
@@ -696,6 +697,8 @@ uint16_t ENC28J60::phyread(uint8_t reg) {
 
 bool ENC28J60::isLinked() {
     // ( https://github.com/JAndrassy/EthernetENC/tree/master/src/utility/enc28j60.h )
-
-    return !!(phyread(MACSTAT2) & 0x400);
+    ethernet_arch_lwip_begin();
+    auto ret = !!(phyread(MACSTAT2) & 0x400);
+    ethernet_arch_lwip_end();
+    return ret;
 }

libraries/lwIP_w5500/src/utility/w5500.h

@@ -38,6 +38,7 @@
 #include <stdint.h>
 #include <Arduino.h>
 #include <SPI.h>
+#include <LwipEthernet.h>
 
 class Wiznet5500 {
 public:
@@ -83,7 +84,10 @@ public:
         @return true when physical link is up
     */
     bool isLinked() {
-        return wizphy_getphylink() == PHY_LINK_ON;
+        ethernet_arch_lwip_begin();
+        auto ret = wizphy_getphylink() == PHY_LINK_ON;
+        ethernet_arch_lwip_end();
+        return ret;
     }
 
     /**
@@ -267,7 +271,7 @@ private:
     /**
         set the power mode of phy inside WIZCHIP. Refer to @ref PHYCFGR in W5500, @ref PHYSTATUS in
         W5200
-        @param pmode Settig value of power down mode.
+        @param pmode Setting value of power down mode.
     */
     int8_t wizphy_setphypmode(uint8_t pmode);
 
@@ -432,7 +436,7 @@ private:
     /* PHYCFGR register value */
     enum {
         PHYCFGR_RST         = ~(1 << 7),  //< For PHY reset, must operate AND mask.
-        PHYCFGR_OPMD        = (1 << 6),   // Configre PHY with OPMDC value
+        PHYCFGR_OPMD        = (1 << 6),   // Configure PHY with OPMDC value
         PHYCFGR_OPMDC_ALLA  = (7 << 3),
         PHYCFGR_OPMDC_PDOWN = (6 << 3),
         PHYCFGR_OPMDC_NA    = (5 << 3),

package.json

@@ -1,6 +1,6 @@
 {
   "name": "framework-arduinopico",
-  "version": "1.30600.0",
+  "version": "1.30601.0",
   "description": "Arduino Wiring-based Framework (RPi Pico RP2040)",
   "keywords": [
     "framework",

package/package_pico_index.template.json

@@ -89,6 +89,9 @@
                   {
                      "name": "DatanoiseTV PicoADK"
                   },
+                  {
+                     "name": "Degz Robotics Suibo RP2040"
+                  },
                   {
                      "name": "DeRuiLab FlyBoard2040Core"
                   },
@@ -155,6 +158,18 @@
                   {
                      "name": "Pimoroni Tiny2040"
                   },
+                  {
+                     "name": "RAKwireless RAK11300"
+                  },
+                  {
+                     "name": "redscorp RP2040-Eins"
+                  },
+                  {
+                     "name": "redscorp RP2040-ProMini"
+                  },
+                  {
+                     "name": "Generic Sea-Picro"
+                  },
                   {
                      "name": "Silicognition RP2040-Shim"
                   },
@@ -209,9 +224,6 @@
                   {
                      "name": "WIZnet W5500-EVB-Pico"
                   },
-                  {
-                     "name": "redscorp RP2040-ProMini"
-                  },
                   {
                      "name": "Generic RP2040"
                   }
@@ -286,17 +298,17 @@
                   },
                   {
                      "host": "i686-mingw32",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/2.1.0-a/i686-w64-mingw32.picotool-f6fe6b7.230911.zip",
-                     "archiveFileName": "i686-w64-mingw32.picotool-f6fe6b7.230911.zip",
-                     "checksum": "SHA-256:8059eb1b0c41fad5ec6da06a731f19e7d25ce21684679d9975311ecb66e0aca6",
-                     "size": "292401"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/2.1.0-a/i686-w64-mingw32.picotool1-f6fe6b7.230911.zip",
+                     "archiveFileName": "i686-w64-mingw32.picotool1-f6fe6b7.230911.zip",
+                     "checksum": "SHA-256:5c8fc5a9a9a6f4cc49a84bcf4cde6f4188d64008d11754bda4da48affca39f13",
+                     "size": "291812"
                   },
                   {
                      "host": "x86_64-apple-darwin",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/2.1.0-a/x86_64-apple-darwin15.picotool-f6fe6b7.230911.tar.gz",
-                     "archiveFileName": "x86_64-apple-darwin15.picotool-f6fe6b7.230911.tar.gz",
-                     "checksum": "SHA-256:01813cb827a33de73ac46450f9525855b483269b6248a5c9d123d4771b78e5d7",
-                     "size": "845993"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/2.1.0-a/x86_64-apple-darwin15.picotool1-f6fe6b7.230911.tar.gz",
+                     "archiveFileName": "x86_64-apple-darwin15.picotool1-f6fe6b7.230911.tar.gz",
+                     "checksum": "SHA-256:80415ab9b4b63a327b31a1b84df31883dae4080a286851a546a46badf1b7de41",
+                     "size": "1130270"
                   },
                   {
                      "host": "x86_64-pc-linux-gnu",
@@ -307,10 +319,10 @@
                   },
                   {
                      "host": "x86_64-mingw32",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/2.1.0-a/x86_64-w64-mingw32.picotool-f6fe6b7.230911.zip",
-                     "archiveFileName": "x86_64-w64-mingw32.picotool-f6fe6b7.230911.zip",
-                     "checksum": "SHA-256:08e516df547aaf42d808584e3f7f95b2c91966721f8dc377a772f67eb7b2baa4",
-                     "size": "277242"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/2.1.0-a/x86_64-w64-mingw32.picotool1-f6fe6b7.230911.zip",
+                     "archiveFileName": "x86_64-w64-mingw32.picotool1-f6fe6b7.230911.zip",
+                     "checksum": "SHA-256:1a0cbf35adcc1fa696af8a97ea37d9f413fb4de152713b8f97f1d0ca393a5593",
+                     "size": "277139"
                   }
                ]
             },

platform.txt

@@ -20,7 +20,7 @@
 # https://github.com/arduino/Arduino/wiki/Arduino-IDE-1.5---3rd-party-Hardware-specification
 
 name=Raspberry Pi RP2040 Boards
-version=3.6.0
+version=3.6.1
 
 # Required discoveries and monitors
 # ---------------------------------

tools/json/degz_suibo.json

@@ -0,0 +1,56 @@
+{
+  "build": {
+    "arduino": {
+      "earlephilhower": {
+        "boot2_source": "boot2_generic_03h_4_padded_checksum.S",
+        "usb_vid": "0x2E8A",
+        "usb_pid": "0xF00A"
+      }
+    },
+    "core": "earlephilhower",
+    "cpu": "cortex-m0plus",
+    "extra_flags": "-D ARDUINO_DEGZ_SUIBO_RP2040 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
+    "f_cpu": "133000000L",
+    "hwids": [
+      [
+        "0x2E8A",
+        "0x00C0"
+      ],
+      [
+        "0x2E8A",
+        "0xF00A"
+      ]
+    ],
+    "mcu": "rp2040",
+    "variant": "degz_suibo"
+  },
+  "debug": {
+    "jlink_device": "RP2040_M0_0",
+    "openocd_target": "rp2040.cfg",
+    "svd_path": "rp2040.svd"
+  },
+  "frameworks": [
+    "arduino"
+  ],
+  "name": "Suibo RP2040",
+  "upload": {
+    "maximum_ram_size": 270336,
+    "maximum_size": 16777216,
+    "require_upload_port": true,
+    "native_usb": true,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": false,
+    "protocol": "picotool",
+    "protocols": [
+      "blackmagic",
+      "cmsis-dap",
+      "jlink",
+      "raspberrypi-swd",
+      "picotool",
+      "picoprobe",
+      "pico-debug"
+    ]
+  },
+  "url": "https://www.degzrobotics.com/suibo",
+  "vendor": "Degz Robotics"
+}

tools/json/rakwireless_rak11300.json

@@ -0,0 +1,56 @@
+{
+  "build": {
+    "arduino": {
+      "earlephilhower": {
+        "boot2_source": "boot2_w25q16jvxq_4_padded_checksum.S",
+        "usb_vid": "0x2E8A",
+        "usb_pid": "0x00C0"
+      }
+    },
+    "core": "earlephilhower",
+    "cpu": "cortex-m0plus",
+    "extra_flags": "-D ARDUINO_RAKWIRELESS_RAK11300 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=500",
+    "f_cpu": "133000000L",
+    "hwids": [
+      [
+        "0x2E8A",
+        "0x00C0"
+      ],
+      [
+        "0x2E8A",
+        "0x00C0"
+      ]
+    ],
+    "mcu": "rp2040",
+    "variant": "rakwireless_rak11300"
+  },
+  "debug": {
+    "jlink_device": "RP2040_M0_0",
+    "openocd_target": "rp2040.cfg",
+    "svd_path": "rp2040.svd"
+  },
+  "frameworks": [
+    "arduino"
+  ],
+  "name": "RAK11300",
+  "upload": {
+    "maximum_ram_size": 270336,
+    "maximum_size": 2097152,
+    "require_upload_port": true,
+    "native_usb": true,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": false,
+    "protocol": "picotool",
+    "protocols": [
+      "blackmagic",
+      "cmsis-dap",
+      "jlink",
+      "raspberrypi-swd",
+      "picotool",
+      "picoprobe",
+      "pico-debug"
+    ]
+  },
+  "url": "https://store.rakwireless.com/products/wisduo-lpwan-module-rak11300",
+  "vendor": "RAKwireless"
+}

tools/json/redscorp_rp2040_eins.json

@@ -0,0 +1,56 @@
+{
+  "build": {
+    "arduino": {
+      "earlephilhower": {
+        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
+        "usb_vid": "0x2341",
+        "usb_pid": "0x005F"
+      }
+    },
+    "core": "earlephilhower",
+    "cpu": "cortex-m0plus",
+    "extra_flags": "-D ARDUINO_REDSCORP_RP2040_EINS -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
+    "f_cpu": "133000000L",
+    "hwids": [
+      [
+        "0x2E8A",
+        "0x00C0"
+      ],
+      [
+        "0x2341",
+        "0x005F"
+      ]
+    ],
+    "mcu": "rp2040",
+    "variant": "redscorp_rp2040_eins"
+  },
+  "debug": {
+    "jlink_device": "RP2040_M0_0",
+    "openocd_target": "rp2040.cfg",
+    "svd_path": "rp2040.svd"
+  },
+  "frameworks": [
+    "arduino"
+  ],
+  "name": "RP2040-Eins",
+  "upload": {
+    "maximum_ram_size": 270336,
+    "maximum_size": 16777216,
+    "require_upload_port": true,
+    "native_usb": true,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": false,
+    "protocol": "picotool",
+    "protocols": [
+      "blackmagic",
+      "cmsis-dap",
+      "jlink",
+      "raspberrypi-swd",
+      "picotool",
+      "picoprobe",
+      "pico-debug"
+    ]
+  },
+  "url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
+  "vendor": "redscorp"
+}

tools/json/redscorp_rp2040_promini.json

@@ -22,7 +22,7 @@
       ]
     ],
     "mcu": "rp2040",
-    "variant": "redscorp-rp2040-promini"
+    "variant": "redscorp_rp2040_promini"
   },
   "debug": {
     "jlink_device": "RP2040_M0_0",

tools/json/sea_picro.json

@@ -0,0 +1,56 @@
+{
+  "build": {
+    "arduino": {
+      "earlephilhower": {
+        "boot2_source": "boot2_w25q64jv_4_padded_checksum.S",
+        "usb_vid": "0x2E8A",
+        "usb_pid": "0xF00A"
+      }
+    },
+    "core": "earlephilhower",
+    "cpu": "cortex-m0plus",
+    "extra_flags": "-D ARDUINO_SEA_PICRO -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=500",
+    "f_cpu": "133000000L",
+    "hwids": [
+      [
+        "0x2E8A",
+        "0x00C0"
+      ],
+      [
+        "0x2E8A",
+        "0xF00A"
+      ]
+    ],
+    "mcu": "rp2040",
+    "variant": "sea_picro"
+  },
+  "debug": {
+    "jlink_device": "RP2040_M0_0",
+    "openocd_target": "rp2040.cfg",
+    "svd_path": "rp2040.svd"
+  },
+  "frameworks": [
+    "arduino"
+  ],
+  "name": "Sea-Picro",
+  "upload": {
+    "maximum_ram_size": 270336,
+    "maximum_size": 8388608,
+    "require_upload_port": true,
+    "native_usb": true,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": false,
+    "protocol": "picotool",
+    "protocols": [
+      "blackmagic",
+      "cmsis-dap",
+      "jlink",
+      "raspberrypi-swd",
+      "picotool",
+      "picoprobe",
+      "pico-debug"
+    ]
+  },
+  "url": "https://github.com/joshajohnson/sea-picro",
+  "vendor": "Generic"
+}

tools/libpico/btstack_config.h

@@ -2,6 +2,7 @@
 
 // BTstack features that can be enabled
 #define ENABLE_LOG_INFO
+#define ENABLE_LOG_DEBUG
 #define ENABLE_LOG_ERROR
 #define ENABLE_PRINTF_HEXDUMP
 #define ENABLE_SCO_OVER_HCI

tools/makeboards.py

@@ -28,8 +28,8 @@ def BuildDebugPort(name):
         print("%s.menu.dbgport.%s.build.debug_port=-DDEBUG_RP2040_PORT=%s" % (name, p, p))
 
 def BuildDebugLevel(name):
-    for l in [ ("None", ""), ("Core", "-DDEBUG_RP2040_CORE"), ("SPI", "-DDEBUG_RP2040_SPI"), ("Wire", "-DDEBUG_RP2040_WIRE"),
-               ("All", "-DDEBUG_RP2040_WIRE -DDEBUG_RP2040_SPI -DDEBUG_RP2040_CORE"), ("NDEBUG", "-DNDEBUG") ]:
+    for l in [ ("None", ""), ("Core", "-DDEBUG_RP2040_CORE"), ("SPI", "-DDEBUG_RP2040_SPI"), ("Wire", "-DDEBUG_RP2040_WIRE"), ("Bluetooth", "-DDEBUG_RP2040_BLUETOOTH"),
+               ("All", "-DDEBUG_RP2040_WIRE -DDEBUG_RP2040_SPI -DDEBUG_RP2040_CORE -DDEBUG_RP2040_BLUETOOTH"), ("NDEBUG", "-DNDEBUG") ]:
         print("%s.menu.dbglvl.%s=%s" % (name, l[0], l[0]))
         print("%s.menu.dbglvl.%s.build.debug_level=%s" % (name, l[0], l[1]))
 
@@ -205,7 +205,7 @@ def BuildGlobalMenuList():
     print("menu.ipbtstack=IP/Bluetooth Stack")
     print("menu.uploadmethod=Upload Method")
 
-def MakeBoard(name, vendor_name, product_name, vid, pid, pwr, boarddefine, flashsizemb, boot2, extra = None):
+def MakeBoard(name, vendor_name, product_name, vid, pid, pwr, boarddefine, flashsizemb, boot2, extra = None, board_url = None):
     fssizelist = [ 0, 64 * 1024, 128 * 1024, 256 * 1024, 512 * 1024 ]
     for i in range(1, flashsizemb):
         fssizelist.append(i * 1024 * 1024)
@@ -236,13 +236,13 @@ def MakeBoard(name, vendor_name, product_name, vid, pid, pwr, boarddefine, flash
     elif name.startswith("adafruit") and "w25q080" in boot2:
         BuildBootW25Q(name)
     BuildUploadMethodMenu(name)
-    MakeBoardJSON(name, vendor_name, product_name, vid, pid, pwr, boarddefine, flashsizemb, boot2, extra)
+    MakeBoardJSON(name, vendor_name, product_name, vid, pid, pwr, boarddefine, flashsizemb, boot2, extra, board_url)
     global pkgjson
     thisbrd = {}
     thisbrd['name'] = "%s %s" % (vendor_name, product_name)
     pkgjson['packages'][0]['platforms'][0]['boards'].append(thisbrd)
 
-def MakeBoardJSON(name, vendor_name, product_name, vid, pid, pwr, boarddefine, flashsizemb, boot2, extra):
+def MakeBoardJSON(name, vendor_name, product_name, vid, pid, pwr, boarddefine, flashsizemb, boot2, extra, board_url):
     if type(pid) == list:
         pid = pid[0]
     if extra != None:
@@ -304,7 +304,7 @@ def MakeBoardJSON(name, vendor_name, product_name, vid, pid, pwr, boarddefine, f
       "pico-debug"
     ]
   },
-  "url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
+  "url": "BOARDURL",
   "vendor": "VENDORNAME"
 }\n"""\
 .replace('VARIANTNAME', name)\
@@ -312,6 +312,7 @@ def MakeBoardJSON(name, vendor_name, product_name, vid, pid, pwr, boarddefine, f
 .replace('BOOT2', boot2)\
 .replace('VID', vid.upper().replace("X", "x"))\
 .replace('PID', pid.upper().replace("X", "x"))\
+.replace('BOARDURL', board_url or 'https://www.raspberrypi.org/products/raspberry-pi-pico/')\
 .replace('VENDORNAME', vendor_name)\
 .replace('PRODUCTNAME', product_name)\
 .replace('FLASHSIZE', str(1024*1024*flashsizemb))\
@@ -373,6 +374,9 @@ MakeBoard("cytron_maker_pi_rp2040", "Cytron", "Maker Pi RP2040", "0x2e8a", "0x10
 # DatanoiseTV
 MakeBoard("datanoisetv_picoadk", "DatanoiseTV", "PicoADK", "0x2e8a", "0x000a", 250, "DATANOISETV_PICOADK", 2, "boot2_w25q080_2_padded_checksum")
 
+# Degz Robotics
+MakeBoard("degz_suibo", "Degz Robotics", "Suibo RP2040", "0x2e8a", "0xf00a", 250, "DEGZ_SUIBO_RP2040", 16, "boot2_generic_03h_4_padded_checksum", board_url="https://www.degzrobotics.com/suibo")
+
 # DeRuiLab
 MakeBoard("flyboard2040_core", "DeRuiLab", "FlyBoard2040Core", "0x2e8a", "0x008a", 500, "FLYBOARD2040_CORE", 4, "boot2_w25q080_2_padded_checksum")
 
@@ -413,6 +417,16 @@ MakeBoard("pimoroni_pga2040", "Pimoroni", "PGA2040", "0x2e8a", "0x1008", 250, "P
 MakeBoard("pimoroni_plasma2040", "Pimoroni", "Plasma2040", "0x2e8a", "0x100a", 500, "PIMORONI_PLASMA2040", 2, "boot2_w25q080_2_padded_checksum")
 MakeBoard("pimoroni_tiny2040", "Pimoroni", "Tiny2040", "0x2e8a", "0x100a", 500, "PIMORONI_TINY2040", 2, "boot2_w25q64jv_4_padded_checksum")
 
+# RAKwireless
+MakeBoard("rakwireless_rak11300", "RAKwireless", "RAK11300", "0x2e8a", "0x00c0", 500, "RAKWIRELESS_RAK11300", 2, "boot2_w25q16jvxq_4_padded_checksum", None, "https://store.rakwireless.com/products/wisduo-lpwan-module-rak11300")
+
+# Redscorp
+MakeBoard("redscorp_rp2040_eins", "redscorp", "RP2040-Eins", "0x2341", ["0x005f", "0x805f", "0x015f", "0x025f"] , 250, "REDSCORP_RP2040_EINS", 16, "boot2_w25q080_2_padded_checksum")
+MakeBoard("redscorp_rp2040_promini", "redscorp", "RP2040-ProMini", "0x2341", ["0x005f", "0x805f", "0x015f", "0x025f"] , 250, "REDSCORP_RP2040_PROMINI", 16, "boot2_w25q080_2_padded_checksum")
+
+# Sea-Picro
+MakeBoard("sea_picro", "Generic", "Sea-Picro", "0x2e8a", "0xf00a", 500, "SEA_PICRO", 8, "boot2_w25q64jv_4_padded_checksum", None, "https://github.com/joshajohnson/sea-picro")
+
 # Silicognition
 MakeBoard("silicognition_rp2040_shim", "Silicognition", "RP2040-Shim", "0x1209", "0xf502", 500, "SILICOGNITION_RP2040_SHIM", 4, "boot2_generic_03h_4_padded_checksum")
 
@@ -449,9 +463,6 @@ MakeBoard("wiznet_5100s_evb_pico", "WIZnet", "W5100S-EVB-Pico", "0x2e8a", "0x102
 MakeBoard("wiznet_wizfi360_evb_pico", "WIZnet", "WizFi360-EVB-Pico", "0x2e8a", "0x1028", 250, "WIZNET_WIZFI360_EVB_PICO", 2, "boot2_w25q080_2_padded_checksum")
 MakeBoard("wiznet_5500_evb_pico", "WIZnet", "W5500-EVB-Pico", "0x2e8a", "0x1029", 250, "WIZNET_5500_EVB_PICO", 2, "boot2_w25q080_2_padded_checksum")
 
-# AG
-MakeBoard("redscorp-rp2040-promini", "redscorp", "RP2040-ProMini", "0x2341", ["0x005f", "0x805f", "0x015f", "0x025f"] , 250, "REDSCORP_RP2040_PROMINI", 16, "boot2_w25q080_2_padded_checksum")
-
 # Generic
 MakeBoard("generic", "Generic", "RP2040", "0x2e8a", "0xf00a", 250, "GENERIC_RP2040", 16, "boot2_generic_03h_4_padded_checksum")
 

tools/uf2conv.py

@@ -279,6 +279,11 @@ def get_drives():
                         match = re.search(r'Mounted\s+.*\s+at\s+([^\.\r\n]*)', stdoutput)
                         if match:
                             drives = [match.group(1)]
+                    else:
+                        stderror =  proc_out.stderr.decode("UTF-8")
+                        match = re.search(r'already mounted at\s+[`\']([^\.\r\n\'`]+)', stderror)
+                        if match:
+                            drives = [match.group(1)]
                 except Exception as ex:
                     print("Exception executing udisksctl. Exception: {}".format(ex))
                     # If it fails, no problem since it was a heroic attempt

variants/degz_suibo/common.h

@@ -0,0 +1,76 @@
+#pragma once
+
+#include <stdint.h>
+
+#define PINS_COUNT          (30u)
+#define NUM_DIGITAL_PINS    (30u)
+#define NUM_ANALOG_INPUTS   (4u)
+#define NUM_ANALOG_OUTPUTS  (0u)
+#define ADC_RESOLUTION      (12u)
+
+#ifdef PIN_LED
+#define LED_BUILTIN PIN_LED
+#endif
+
+static const uint8_t D0 = (0u);
+static const uint8_t D1 = (1u);
+static const uint8_t D2 = (2u);
+static const uint8_t D3 = (3u);
+static const uint8_t D4 = (4u);
+static const uint8_t D5 = (5u);
+static const uint8_t D6 = (6u);
+static const uint8_t D7 = (7u);
+static const uint8_t D8 = (8u);
+static const uint8_t D9 = (9u);
+static const uint8_t D10 = (10u);
+static const uint8_t D11 = (11u);
+static const uint8_t D12 = (12u);
+static const uint8_t D13 = (13u);
+static const uint8_t D14 = (14u);
+static const uint8_t D15 = (15u);
+static const uint8_t D16 = (16u);
+static const uint8_t D17 = (17u);
+static const uint8_t D18 = (18u);
+static const uint8_t D19 = (19u);
+static const uint8_t D20 = (20u);
+static const uint8_t D21 = (21u);
+static const uint8_t D22 = (22u);
+static const uint8_t D23 = (23u);
+static const uint8_t D24 = (24u);
+static const uint8_t D25 = (25u);
+static const uint8_t D26 = (26u);
+static const uint8_t D27 = (27u);
+static const uint8_t D28 = (28u);
+static const uint8_t D29 = (29u);
+
+#ifdef __PIN_A0
+static const uint8_t A0 = __PIN_A0;
+#else
+static const uint8_t A0 = (26u);
+#endif
+
+#ifdef __PIN_A1
+static const uint8_t A1 = __PIN_A1;
+#else
+static const uint8_t A1 = (27u);
+#endif
+
+#ifdef __PIN_A2
+static const uint8_t A2 = __PIN_A2;
+#else
+static const uint8_t A2 = (28u);
+#endif
+
+#ifdef __PIN_A3
+static const uint8_t A3 = __PIN_A3;
+#else
+static const uint8_t A3 = (29u);
+#endif
+
+static const uint8_t SS = PIN_SPI0_SS;
+static const uint8_t MOSI = PIN_SPI0_MOSI;
+static const uint8_t MISO = PIN_SPI0_MISO;
+static const uint8_t SCK = PIN_SPI0_SCK;
+
+static const uint8_t SDA = PIN_WIRE0_SDA;
+static const uint8_t SCL = PIN_WIRE0_SCL;

variants/degz_suibo/pins_arduino.h

@@ -0,0 +1,39 @@
+#pragma once
+
+// Pin definitions taken from:
+//    https://datasheets.raspberrypi.org/pico/pico-datasheet.pdf
+
+
+// LEDs
+#define PIN_LED        (25u)
+
+// Serial
+#define PIN_SERIAL1_TX (0u)
+#define PIN_SERIAL1_RX (1u)
+
+#define PIN_SERIAL2_TX (8u)
+#define PIN_SERIAL2_RX (9u)
+
+// SPI
+#define PIN_SPI0_MISO  (16u)
+#define PIN_SPI0_MOSI  (19u)
+#define PIN_SPI0_SCK   (18u)
+#define PIN_SPI0_SS    (17u)
+
+#define PIN_SPI1_MISO  (12u)
+#define PIN_SPI1_MOSI  (15u)
+#define PIN_SPI1_SCK   (14u)
+#define PIN_SPI1_SS    (13u)
+
+// Wire
+#define PIN_WIRE0_SDA  (4u)
+#define PIN_WIRE0_SCL  (5u)
+
+#define PIN_WIRE1_SDA  (26u)
+#define PIN_WIRE1_SCL  (27u)
+
+#define SERIAL_HOWMANY (3u)
+#define SPI_HOWMANY    (2u)
+#define WIRE_HOWMANY   (2u)
+
+#include "../generic/common.h"

variants/rakwireless_rak11300/pins_arduino.h

@@ -0,0 +1,46 @@
+#pragma once
+
+// Pin definitions taken from:
+//    RAK definition: https://github.com/RAKWireless/RAK-RP-Arduino/
+//    RAK datasheet: https://docs.rakwireless.com/Product-Categories/WisDuo/RAK11300-Module/Datasheet/#overview
+//    Internal wiring of SX1262 module: https://forum.rakwireless.com/t/rak11300-pinout-rp2040-to-sx1262/8414/
+
+// Serial
+#define PIN_SERIAL1_TX (0u)
+#define PIN_SERIAL1_RX (1u)
+
+#define PIN_SERIAL2_TX (5u)
+#define PIN_SERIAL2_RX (4u)
+
+// SPI
+#define PIN_SPI0_MISO  (16u)
+#define PIN_SPI0_MOSI  (19u)
+#define PIN_SPI0_SCK   (18u)
+#define PIN_SPI0_SS    (17u)
+
+// Hardwired to SX1262 Radio
+#define PIN_SPI1_MISO  (12u)
+#define PIN_SPI1_MOSI  (11u)
+#define PIN_SPI1_SCK   (10u)
+#define PIN_SPI1_SS    (13u)
+// Reset / NReset PIN
+#define PIN_SX1262_NRESET   (14u)
+// Busy / GPIO PIN
+#define PIN_SX1262_BUSY     (15u)
+// DIO1 / IRQ PIN
+#define PIN_SX1262_DIO1     (29u)
+// Antenna Switch power control
+#define PIN_SX1262_ANT_PWR  (25u)
+
+// Wire
+#define PIN_WIRE0_SDA  (2u)
+#define PIN_WIRE0_SCL  (3u)
+
+#define PIN_WIRE1_SDA  (20u)
+#define PIN_WIRE1_SCL  (21u)
+
+#define SERIAL_HOWMANY (2u)
+#define SPI_HOWMANY    (2u)
+#define WIRE_HOWMANY   (2u)
+
+#include "../generic/common.h"

variants/redscorp_rp2040_eins/pins_arduino.h

@@ -0,0 +1,105 @@
+/*  RP2040-Eins board support
+    URL: https://github.com/red-scorp/RP2040-Eins
+    Based on Arduino Nano Connect configuration */
+
+#pragma once
+
+// Pin definitions taken from:
+//    https://datasheets.raspberrypi.org/pico/pico-datasheet.pdf
+static const uint8_t D0 = (1u);
+static const uint8_t D1 = (0u);
+static const uint8_t D2 = (25u);
+static const uint8_t D3 = (15u);
+static const uint8_t D4 = (16u);
+static const uint8_t D5 = (17u);
+static const uint8_t D6 = (18u);
+static const uint8_t D7 = (19u);
+static const uint8_t D8 = (20u);
+static const uint8_t D9 = (21u);
+static const uint8_t D10 = (5u);
+static const uint8_t D11 = (7u);
+static const uint8_t D12 = (4u);
+static const uint8_t D13 = (6u);
+static const uint8_t D14 = (26u);
+static const uint8_t D15 = (27u);
+static const uint8_t D16 = (28u);
+static const uint8_t D17 = (29u);
+static const uint8_t D18 = (12u);
+static const uint8_t D19 = (13u);
+static const uint8_t D20 = (22u);
+static const uint8_t D21 = (23u);
+static const uint8_t D22 = (9u);
+static const uint8_t D23 = (10u);
+static const uint8_t D24 = (11u);
+static const uint8_t D25 = (8u);
+static const uint8_t D26 = (2u);
+static const uint8_t D27 = (24u);
+static const uint8_t D28 = (3u);
+static const uint8_t D29 = (14u);
+
+static const uint8_t A0 = (26u);
+static const uint8_t A1 = (27u);
+static const uint8_t A2 = (28u);
+static const uint8_t A3 = (29u);
+
+// LEDs
+#define PIN_LED        (D13)
+#define PIN_LED_R      (D22)
+#define PIN_LED_G      (D23)
+#define PIN_LED_B      (D24)
+#define LED_BUILTIN    PIN_LED
+
+// Serial
+#define PIN_SERIAL1_TX (D1)
+#define PIN_SERIAL1_RX (D0)
+
+#define PIN_SERIAL2_TX  (D25)
+#define PIN_SERIAL2_RX  (D26)
+#define PIN_SERIAL2_CTS (D27)
+#define PIN_SERIAL2_RTS (D28)
+
+// SPI
+#define PIN_SPI0_MISO  (D12)
+#define PIN_SPI0_MOSI  (D11)
+#define PIN_SPI0_SCK   (D13)
+#define PIN_SPI0_SS    (D10)
+
+#define PIN_SPI1_MISO  (D25)
+#define PIN_SPI1_MOSI  (D28)
+#define PIN_SPI1_SCK   (D29)
+#define PIN_SPI1_SS    (D10)
+
+// Wire
+#define PIN_WIRE0_SDA  (D18)
+#define PIN_WIRE0_SCL  (D19)
+
+#define PIN_WIRE1_SDA  (D14)
+#define PIN_WIRE1_SCL  (D15)
+
+#define SERIAL_HOWMANY (3u)
+#define SPI_HOWMANY    (2u)
+#define WIRE_HOWMANY   (1u)
+
+#define PINS_COUNT          (30u)
+#define NUM_DIGITAL_PINS    (30u)
+#define NUM_ANALOG_INPUTS   (4u)
+#define NUM_ANALOG_OUTPUTS  (0u)
+#define ADC_RESOLUTION      (12u)
+
+#define DigitalPinToPinName(p) (p)
+
+static const uint8_t SS = PIN_SPI0_SS;
+static const uint8_t MOSI = PIN_SPI0_MOSI;
+static const uint8_t MISO = PIN_SPI0_MISO;
+static const uint8_t SCK = PIN_SPI0_SCK;
+
+// Some random stuff
+
+#define SERIAL_PORT_USBVIRTUAL      SerialUSB
+#define SERIAL_PORT_MONITOR         SerialUSB
+#define SERIAL_PORT_HARDWARE        Serial1
+#define SERIAL_PORT_HARDWARE_OPEN   Serial2
+
+#define CRYPTO_WIRE		Wire
+
+#define USB_MAX_POWER	(500)

variants/redscorp_rp2040_promini/pins_arduino.h

@@ -28,13 +28,13 @@ static const uint8_t D18 = (12u);
 static const uint8_t D19 = (13u);
 static const uint8_t D20 = (22u);
 static const uint8_t D21 = (23u);
-static const uint8_t D22 = (2u);
-static const uint8_t D23 = (24u);
-static const uint8_t D24 = (3u);
+static const uint8_t D22 = (9u);
+static const uint8_t D23 = (10u);
+static const uint8_t D24 = (11u);
 static const uint8_t D25 = (8u);
-static const uint8_t D26 = (9u);
-static const uint8_t D27 = (10u);
-static const uint8_t D28 = (11u);
+static const uint8_t D26 = (2u);
+static const uint8_t D27 = (24u);
+static const uint8_t D28 = (3u);
 static const uint8_t D29 = (14u);
 
 static const uint8_t A0 = (26u);
@@ -44,6 +44,7 @@ static const uint8_t A3 = (29u);
 
 // LEDs
 #define PIN_LED        (D13)
+#define LED_BUILTIN    PIN_LED
 
 // Serial
 #define PIN_SERIAL1_TX (D1)
@@ -82,7 +83,6 @@ static const uint8_t A3 = (29u);
 #define NUM_ANALOG_OUTPUTS  (0u)
 #define ADC_RESOLUTION      (12u)
 
-#define LED_BUILTIN PIN_LED
 #define DigitalPinToPinName(p) (p)
 
 static const uint8_t SS = PIN_SPI0_SS;

variants/sea_picro/pins_arduino.h

@@ -0,0 +1,42 @@
+#pragma once
+
+// Pin definitions taken from:
+//    https://github.com/joshajohnson/sea-picro/blob/master/documentation/pinout/sea-picro-top-pinout-rory-render.png
+
+// LEDs not pinned out
+#define PIN_LED (31u)
+
+// Serial
+#define PIN_SERIAL1_TX (0u)
+#define PIN_SERIAL1_RX (1u)
+
+// Not pinned out
+#define PIN_SERIAL2_TX (31u)
+#define PIN_SERIAL2_RX (31u)
+
+// SPI
+#define PIN_SPI0_MISO (20u)
+#define PIN_SPI0_MOSI (23u)
+#define PIN_SPI0_SCK (22u)
+#define PIN_SPI0_SS (21u)
+
+#define PIN_SPI1_MISO (12u)
+#define PIN_SPI1_MOSI (13u)
+#define PIN_SPI1_SCK (14u)
+#define PIN_SPI1_SS (15u)
+
+// Wire
+#define PIN_WIRE0_SDA (4u)
+#define PIN_WIRE0_SCL (5u)
+
+// Not pinned out
+#define PIN_WIRE1_SDA (2u)
+#define PIN_WIRE1_SCL (3u)
+
+#define SERIAL_HOWMANY (1u)
+#define SPI_HOWMANY (2u)
+#define WIRE_HOWMANY (2u)
+
+#define PIN_NEOPIXEL (25u)
+
+#include "../generic/common.h"