Update version

Optimize and improve upload experience (#1136 )
Stop the IDE from reporting large "Serial port not fount"-type errors after every upload by delaying a bit before the uploader exits to give the OS/Pico time to renegotiate. Fixes flashing problems on certain Linux distros by checking all possible mount locations instead of only the first one to be found. Make 1200bps reset tickle more robust Co-authored-by: Earle F. Philhower, III <earlephilhower@yahoo.com>
2023-02-11 12:34:40 -08:00 · 2023-02-11 12:33:44 -08:00 · 2023-02-11 11:57:27 -08:00 · 2023-02-09 13:29:45 -08:00 · 2023-02-09 08:39:35 -08:00 · 2023-02-07 08:10:24 -08:00
33 changed files with 705 additions and 232 deletions
@@ -191,6 +191,9 @@ Here are some links to coverage and additional tutorials for using `arduino-pico
 * Adafruit Feather RP2040 running LCD + TMP117 - https://www.youtube.com/watch?v=fKDeqZiIwHg
 * Demonstration of Servos and I2C in Korean - https://cafe.naver.com/arduinoshield/1201
 * Home Assistant Pico W integration starter project using Arduino - https://github.com/daniloc/PicoW_HomeAssistant_Starter
+* Tutorials for the Raspberry Pi Pico / uPesy RP2040 DevKit board 
+    - English version: https://www.upesy.com/blogs/tutorials/best-tutorials-for-rpi-pi-pico-with-arduino-code
+    - French version: https://www.upesy.fr/blogs/tutorials/best-tutorials-for-rpi-pi-pico-with-arduino-code

 # Contributing
 If you want to contribute or have bugfixes, drop me a note at <earlephilhower@yahoo.com> or open an issue/PR here.
@@ -37,7 +37,8 @@ rpipico.vid.6=0x2e8a
 rpipico.pid.6=0xc00a
 rpipico.vid.7=0x2e8a
 rpipico.pid.7=0xc10a
-rpipico.build.usbpid=-DSERIALUSB_PID=0x000a
+rpipico.build.usbvid=-DUSBD_VID=0x2e8a
+rpipico.build.usbpid=-DUSBD_PID=0x000a
 rpipico.build.usbpwr=-DUSBD_MAX_POWER_MA=250
 rpipico.build.board=RASPBERRY_PI_PICO
 rpipico.build.mcu=cortex-m0plus
@@ -52,8 +53,6 @@ rpipico.build.led=
 rpipico.build.core=rp2040
 rpipico.build.ldscript=memmap_default.ld
 rpipico.build.boot2=boot2_w25q080_2_padded_checksum
-rpipico.build.vid=0x2e8a
-rpipico.build.pid=0x000a
 rpipico.build.usb_manufacturer="Raspberry Pi"
 rpipico.build.usb_product="Pico"
 rpipico.menu.flash.2097152_0=2MB (no FS)
@@ -224,7 +223,8 @@ rpipicow.vid.6=0x2e8a
 rpipicow.pid.6=0xf00a
 rpipicow.vid.7=0x2e8a
 rpipicow.pid.7=0xf10a
-rpipicow.build.usbpid=-DSERIALUSB_PID=0xf00a
+rpipicow.build.usbvid=-DUSBD_VID=0x2e8a
+rpipicow.build.usbpid=-DUSBD_PID=0xf00a
 rpipicow.build.usbpwr=-DUSBD_MAX_POWER_MA=250
 rpipicow.build.board=RASPBERRY_PI_PICO_W
 rpipicow.build.mcu=cortex-m0plus
@@ -239,8 +239,6 @@ rpipicow.build.led=
 rpipicow.build.core=rp2040
 rpipicow.build.ldscript=memmap_default.ld
 rpipicow.build.boot2=boot2_w25q080_2_padded_checksum
-rpipicow.build.vid=0x2e8a
-rpipicow.build.pid=0xf00a
 rpipicow.build.usb_manufacturer="Raspberry Pi"
 rpipicow.build.usb_product="Pico W"
 rpipicow.menu.flash.2097152_0=2MB (no FS)
@@ -515,7 +513,8 @@ rpipicow.menu.uploadmethod.picodebug.upload.tool.default=picodebug
 0xcb_helios.pid.6=0xcb74
 0xcb_helios.vid.7=0x1209
 0xcb_helios.pid.7=0xcb74
-0xcb_helios.build.usbpid=-DSERIALUSB_PID=0xCB74
+0xcb_helios.build.usbvid=-DUSBD_VID=0x1209
+0xcb_helios.build.usbpid=-DUSBD_PID=0xCB74
 0xcb_helios.build.usbpwr=-DUSBD_MAX_POWER_MA=500
 0xcb_helios.build.board=0XCB_HELIOS
 0xcb_helios.build.mcu=cortex-m0plus
@@ -529,9 +528,7 @@ rpipicow.menu.uploadmethod.picodebug.upload.tool.default=picodebug
 0xcb_helios.build.led=
 0xcb_helios.build.core=rp2040
 0xcb_helios.build.ldscript=memmap_default.ld
-0xcb_helios.build.boot2=boot2_w25q080_2_padded_checksum
-0xcb_helios.build.vid=0x1209
-0xcb_helios.build.pid=0xCB74
+0xcb_helios.build.boot2=boot2_w25q128jvxq_4_padded_checksum
 0xcb_helios.build.usb_manufacturer="0xCB"
 0xcb_helios.build.usb_product="Helios"
 0xcb_helios.menu.flash.16777216_0=16MB (no FS)
@@ -786,7 +783,8 @@ adafruit_feather.vid.6=0x239a
 adafruit_feather.pid.6=0xc0f1
 adafruit_feather.vid.7=0x239a
 adafruit_feather.pid.7=0xc1f1
-adafruit_feather.build.usbpid=-DSERIALUSB_PID=0x80f1
+adafruit_feather.build.usbvid=-DUSBD_VID=0x239a
+adafruit_feather.build.usbpid=-DUSBD_PID=0x80f1
 adafruit_feather.build.usbpwr=-DUSBD_MAX_POWER_MA=250
 adafruit_feather.build.board=ADAFRUIT_FEATHER_RP2040
 adafruit_feather.build.mcu=cortex-m0plus
@@ -801,8 +799,6 @@ adafruit_feather.build.led=
 adafruit_feather.build.core=rp2040
 adafruit_feather.build.ldscript=memmap_default.ld
 adafruit_feather.build.boot2=boot2_w25x10cl_4_padded_checksum
-adafruit_feather.build.vid=0x239a
-adafruit_feather.build.pid=0x80f1
 adafruit_feather.build.usb_manufacturer="Adafruit"
 adafruit_feather.build.usb_product="Feather RP2040"
 adafruit_feather.menu.flash.8388608_0=8MB (no FS)
@@ -1009,7 +1005,8 @@ adafruit_feather_scorpio.vid.6=0x239a
 adafruit_feather_scorpio.pid.6=0xc121
 adafruit_feather_scorpio.vid.7=0x239a
 adafruit_feather_scorpio.pid.7=0xc121
-adafruit_feather_scorpio.build.usbpid=-DSERIALUSB_PID=0x8121
+adafruit_feather_scorpio.build.usbvid=-DUSBD_VID=0x239a
+adafruit_feather_scorpio.build.usbpid=-DUSBD_PID=0x8121
 adafruit_feather_scorpio.build.usbpwr=-DUSBD_MAX_POWER_MA=250
 adafruit_feather_scorpio.build.board=ADAFRUIT_FEATHER_RP2040_SCORPIO
 adafruit_feather_scorpio.build.mcu=cortex-m0plus
@@ -1024,8 +1021,6 @@ adafruit_feather_scorpio.build.led=
 adafruit_feather_scorpio.build.core=rp2040
 adafruit_feather_scorpio.build.ldscript=memmap_default.ld
 adafruit_feather_scorpio.build.boot2=boot2_w25q080_2_padded_checksum
-adafruit_feather_scorpio.build.vid=0x239a
-adafruit_feather_scorpio.build.pid=0x8121
 adafruit_feather_scorpio.build.usb_manufacturer="Adafruit"
 adafruit_feather_scorpio.build.usb_product="Feather RP2040 SCORPIO"
 adafruit_feather_scorpio.menu.flash.8388608_0=8MB (no FS)
@@ -1232,7 +1227,8 @@ adafruit_itsybitsy.vid.6=0x239a
 adafruit_itsybitsy.pid.6=0xc0fd
 adafruit_itsybitsy.vid.7=0x239a
 adafruit_itsybitsy.pid.7=0xc1fd
-adafruit_itsybitsy.build.usbpid=-DSERIALUSB_PID=0x80fd
+adafruit_itsybitsy.build.usbvid=-DUSBD_VID=0x239a
+adafruit_itsybitsy.build.usbpid=-DUSBD_PID=0x80fd
 adafruit_itsybitsy.build.usbpwr=-DUSBD_MAX_POWER_MA=250
 adafruit_itsybitsy.build.board=ADAFRUIT_ITSYBITSY_RP2040
 adafruit_itsybitsy.build.mcu=cortex-m0plus
@@ -1247,8 +1243,6 @@ adafruit_itsybitsy.build.led=
 adafruit_itsybitsy.build.core=rp2040
 adafruit_itsybitsy.build.ldscript=memmap_default.ld
 adafruit_itsybitsy.build.boot2=boot2_w25q080_2_padded_checksum
-adafruit_itsybitsy.build.vid=0x239a
-adafruit_itsybitsy.build.pid=0x80fd
 adafruit_itsybitsy.build.usb_manufacturer="Adafruit"
 adafruit_itsybitsy.build.usb_product="ItsyBitsy RP2040"
 adafruit_itsybitsy.menu.flash.8388608_0=8MB (no FS)
@@ -1455,7 +1449,8 @@ adafruit_qtpy.vid.6=0x239a
 adafruit_qtpy.pid.6=0xc0f7
 adafruit_qtpy.vid.7=0x239a
 adafruit_qtpy.pid.7=0xc1f7
-adafruit_qtpy.build.usbpid=-DSERIALUSB_PID=0x80f7
+adafruit_qtpy.build.usbvid=-DUSBD_VID=0x239a
+adafruit_qtpy.build.usbpid=-DUSBD_PID=0x80f7
 adafruit_qtpy.build.usbpwr=-DUSBD_MAX_POWER_MA=250
 adafruit_qtpy.build.board=ADAFRUIT_QTPY_RP2040
 adafruit_qtpy.build.mcu=cortex-m0plus
@@ -1470,8 +1465,6 @@ adafruit_qtpy.build.led=
 adafruit_qtpy.build.core=rp2040
 adafruit_qtpy.build.ldscript=memmap_default.ld
 adafruit_qtpy.build.boot2=boot2_w25q080_2_padded_checksum
-adafruit_qtpy.build.vid=0x239a
-adafruit_qtpy.build.pid=0x80f7
 adafruit_qtpy.build.usb_manufacturer="Adafruit"
 adafruit_qtpy.build.usb_product="QT Py RP2040"
 adafruit_qtpy.menu.flash.8388608_0=8MB (no FS)
@@ -1678,7 +1671,8 @@ adafruit_stemmafriend.vid.6=0x239a
 adafruit_stemmafriend.pid.6=0xc0e3
 adafruit_stemmafriend.vid.7=0x239a
 adafruit_stemmafriend.pid.7=0xc1e3
-adafruit_stemmafriend.build.usbpid=-DSERIALUSB_PID=0x80e3
+adafruit_stemmafriend.build.usbvid=-DUSBD_VID=0x239a
+adafruit_stemmafriend.build.usbpid=-DUSBD_PID=0x80e3
 adafruit_stemmafriend.build.usbpwr=-DUSBD_MAX_POWER_MA=250
 adafruit_stemmafriend.build.board=ADAFRUIT_STEMMAFRIEND_RP2040
 adafruit_stemmafriend.build.mcu=cortex-m0plus
@@ -1693,8 +1687,6 @@ adafruit_stemmafriend.build.led=
 adafruit_stemmafriend.build.core=rp2040
 adafruit_stemmafriend.build.ldscript=memmap_default.ld
 adafruit_stemmafriend.build.boot2=boot2_w25q080_2_padded_checksum
-adafruit_stemmafriend.build.vid=0x239a
-adafruit_stemmafriend.build.pid=0x80e3
 adafruit_stemmafriend.build.usb_manufacturer="Adafruit"
 adafruit_stemmafriend.build.usb_product="STEMMA Friend RP2040"
 adafruit_stemmafriend.menu.flash.8388608_0=8MB (no FS)
@@ -1901,7 +1893,8 @@ adafruit_trinkeyrp2040qt.vid.6=0x239a
 adafruit_trinkeyrp2040qt.pid.6=0xc109
 adafruit_trinkeyrp2040qt.vid.7=0x239a
 adafruit_trinkeyrp2040qt.pid.7=0xc109
-adafruit_trinkeyrp2040qt.build.usbpid=-DSERIALUSB_PID=0x8109
+adafruit_trinkeyrp2040qt.build.usbvid=-DUSBD_VID=0x239a
+adafruit_trinkeyrp2040qt.build.usbpid=-DUSBD_PID=0x8109
 adafruit_trinkeyrp2040qt.build.usbpwr=-DUSBD_MAX_POWER_MA=250
 adafruit_trinkeyrp2040qt.build.board=ADAFRUIT_TRINKEYQT_RP2040
 adafruit_trinkeyrp2040qt.build.mcu=cortex-m0plus
@@ -1916,8 +1909,6 @@ adafruit_trinkeyrp2040qt.build.led=
 adafruit_trinkeyrp2040qt.build.core=rp2040
 adafruit_trinkeyrp2040qt.build.ldscript=memmap_default.ld
 adafruit_trinkeyrp2040qt.build.boot2=boot2_w25q080_2_padded_checksum
-adafruit_trinkeyrp2040qt.build.vid=0x239a
-adafruit_trinkeyrp2040qt.build.pid=0x8109
 adafruit_trinkeyrp2040qt.build.usb_manufacturer="Adafruit"
 adafruit_trinkeyrp2040qt.build.usb_product="Trinkey RP2040 QT"
 adafruit_trinkeyrp2040qt.menu.flash.8388608_0=8MB (no FS)
@@ -2124,7 +2115,8 @@ adafruit_macropad2040.vid.6=0x239a
 adafruit_macropad2040.pid.6=0xc107
 adafruit_macropad2040.vid.7=0x239a
 adafruit_macropad2040.pid.7=0xc107
-adafruit_macropad2040.build.usbpid=-DSERIALUSB_PID=0x8107
+adafruit_macropad2040.build.usbvid=-DUSBD_VID=0x239a
+adafruit_macropad2040.build.usbpid=-DUSBD_PID=0x8107
 adafruit_macropad2040.build.usbpwr=-DUSBD_MAX_POWER_MA=250
 adafruit_macropad2040.build.board=ADAFRUIT_MACROPAD_RP2040
 adafruit_macropad2040.build.mcu=cortex-m0plus
@@ -2139,8 +2131,6 @@ adafruit_macropad2040.build.led=
 adafruit_macropad2040.build.core=rp2040
 adafruit_macropad2040.build.ldscript=memmap_default.ld
 adafruit_macropad2040.build.boot2=boot2_w25q080_2_padded_checksum
-adafruit_macropad2040.build.vid=0x239a
-adafruit_macropad2040.build.pid=0x8107
 adafruit_macropad2040.build.usb_manufacturer="Adafruit"
 adafruit_macropad2040.build.usb_product="MacroPad RP2040"
 adafruit_macropad2040.menu.flash.8388608_0=8MB (no FS)
@@ -2347,7 +2337,8 @@ adafruit_kb2040.vid.6=0x239a
 adafruit_kb2040.pid.6=0xc105
 adafruit_kb2040.vid.7=0x239a
 adafruit_kb2040.pid.7=0xc105
-adafruit_kb2040.build.usbpid=-DSERIALUSB_PID=0x8105
+adafruit_kb2040.build.usbvid=-DUSBD_VID=0x239a
+adafruit_kb2040.build.usbpid=-DUSBD_PID=0x8105
 adafruit_kb2040.build.usbpwr=-DUSBD_MAX_POWER_MA=250
 adafruit_kb2040.build.board=ADAFRUIT_KB2040_RP2040
 adafruit_kb2040.build.mcu=cortex-m0plus
@@ -2362,8 +2353,6 @@ adafruit_kb2040.build.led=
 adafruit_kb2040.build.core=rp2040
 adafruit_kb2040.build.ldscript=memmap_default.ld
 adafruit_kb2040.build.boot2=boot2_w25q080_2_padded_checksum
-adafruit_kb2040.build.vid=0x239a
-adafruit_kb2040.build.pid=0x8105
 adafruit_kb2040.build.usb_manufacturer="Adafruit"
 adafruit_kb2040.build.usb_product="KB2040"
 adafruit_kb2040.menu.flash.8388608_0=8MB (no FS)
@@ -2562,7 +2551,8 @@ arduino_nano_connect.vid.2=0x2341
 arduino_nano_connect.pid.2=0x015e
 arduino_nano_connect.vid.3=0x2341
 arduino_nano_connect.pid.3=0x025e
-arduino_nano_connect.build.usbpid=-DSERIALUSB_PID=0x005e
+arduino_nano_connect.build.usbvid=-DUSBD_VID=0x2341
+arduino_nano_connect.build.usbpid=-DUSBD_PID=0x005e
 arduino_nano_connect.build.usbpwr=-DUSBD_MAX_POWER_MA=250
 arduino_nano_connect.build.board=NANO_RP2040_CONNECT
 arduino_nano_connect.build.mcu=cortex-m0plus
@@ -2577,8 +2567,6 @@ arduino_nano_connect.build.led=
 arduino_nano_connect.build.core=rp2040
 arduino_nano_connect.build.ldscript=memmap_default.ld
 arduino_nano_connect.build.boot2=boot2_w25q080_2_padded_checksum
-arduino_nano_connect.build.vid=0x2341
-arduino_nano_connect.build.pid=0x005e
 arduino_nano_connect.build.usb_manufacturer="Arduino"
 arduino_nano_connect.build.usb_product="Nano RP2040 Connect"
 arduino_nano_connect.menu.flash.16777216_0=16MB (no FS)
@@ -2833,7 +2821,8 @@ bridgetek_idm2040-7a.vid.6=0x2e8a
 bridgetek_idm2040-7a.pid.6=0xd041
 bridgetek_idm2040-7a.vid.7=0x2e8a
 bridgetek_idm2040-7a.pid.7=0xd141
-bridgetek_idm2040-7a.build.usbpid=-DSERIALUSB_PID=0x1041
+bridgetek_idm2040-7a.build.usbvid=-DUSBD_VID=0x2e8a
+bridgetek_idm2040-7a.build.usbpid=-DUSBD_PID=0x1041
 bridgetek_idm2040-7a.build.usbpwr=-DUSBD_MAX_POWER_MA=250
 bridgetek_idm2040-7a.build.board=BRIDGETEK_IDM2040-7A
 bridgetek_idm2040-7a.build.mcu=cortex-m0plus
@@ -2848,8 +2837,6 @@ bridgetek_idm2040-7a.build.led=
 bridgetek_idm2040-7a.build.core=rp2040
 bridgetek_idm2040-7a.build.ldscript=memmap_default.ld
 bridgetek_idm2040-7a.build.boot2=boot2_w25q080_2_padded_checksum
-bridgetek_idm2040-7a.build.vid=0x2e8a
-bridgetek_idm2040-7a.build.pid=0x1041
 bridgetek_idm2040-7a.build.usb_manufacturer="BridgeTek"
 bridgetek_idm2040-7a.build.usb_product="IDM2040-7A"
 bridgetek_idm2040-7a.build.extra_flags=-DFT8XX_TYPE=BT817 -DDISPLAY_RES=WVGA -DPLATFORM_RP2040
@@ -3057,7 +3044,8 @@ cytron_maker_nano_rp2040.vid.6=0x2e8a
 cytron_maker_nano_rp2040.pid.6=0xd00f
 cytron_maker_nano_rp2040.vid.7=0x2e8a
 cytron_maker_nano_rp2040.pid.7=0xd10f
-cytron_maker_nano_rp2040.build.usbpid=-DSERIALUSB_PID=0x100f
+cytron_maker_nano_rp2040.build.usbvid=-DUSBD_VID=0x2e8a
+cytron_maker_nano_rp2040.build.usbpid=-DUSBD_PID=0x100f
 cytron_maker_nano_rp2040.build.usbpwr=-DUSBD_MAX_POWER_MA=250
 cytron_maker_nano_rp2040.build.board=CYTRON_MAKER_NANO_RP2040
 cytron_maker_nano_rp2040.build.mcu=cortex-m0plus
@@ -3072,8 +3060,6 @@ cytron_maker_nano_rp2040.build.led=
 cytron_maker_nano_rp2040.build.core=rp2040
 cytron_maker_nano_rp2040.build.ldscript=memmap_default.ld
 cytron_maker_nano_rp2040.build.boot2=boot2_w25q080_2_padded_checksum
-cytron_maker_nano_rp2040.build.vid=0x2e8a
-cytron_maker_nano_rp2040.build.pid=0x100f
 cytron_maker_nano_rp2040.build.usb_manufacturer="Cytron"
 cytron_maker_nano_rp2040.build.usb_product="Maker Nano RP2040"
 cytron_maker_nano_rp2040.menu.flash.2097152_0=2MB (no FS)
@@ -3244,7 +3230,8 @@ cytron_maker_pi_rp2040.vid.6=0x2e8a
 cytron_maker_pi_rp2040.pid.6=0xd000
 cytron_maker_pi_rp2040.vid.7=0x2e8a
 cytron_maker_pi_rp2040.pid.7=0xd100
-cytron_maker_pi_rp2040.build.usbpid=-DSERIALUSB_PID=0x1000
+cytron_maker_pi_rp2040.build.usbvid=-DUSBD_VID=0x2e8a
+cytron_maker_pi_rp2040.build.usbpid=-DUSBD_PID=0x1000
 cytron_maker_pi_rp2040.build.usbpwr=-DUSBD_MAX_POWER_MA=250
 cytron_maker_pi_rp2040.build.board=CYTRON_MAKER_PI_RP2040
 cytron_maker_pi_rp2040.build.mcu=cortex-m0plus
@@ -3259,8 +3246,6 @@ cytron_maker_pi_rp2040.build.led=
 cytron_maker_pi_rp2040.build.core=rp2040
 cytron_maker_pi_rp2040.build.ldscript=memmap_default.ld
 cytron_maker_pi_rp2040.build.boot2=boot2_w25q080_2_padded_checksum
-cytron_maker_pi_rp2040.build.vid=0x2e8a
-cytron_maker_pi_rp2040.build.pid=0x1000
 cytron_maker_pi_rp2040.build.usb_manufacturer="Cytron"
 cytron_maker_pi_rp2040.build.usb_product="Maker Pi RP2040"
 cytron_maker_pi_rp2040.menu.flash.2097152_0=2MB (no FS)
@@ -3431,7 +3416,8 @@ datanoisetv_picoadk.vid.6=0x2e8a
 datanoisetv_picoadk.pid.6=0xc00a
 datanoisetv_picoadk.vid.7=0x2e8a
 datanoisetv_picoadk.pid.7=0xc10a
-datanoisetv_picoadk.build.usbpid=-DSERIALUSB_PID=0x000a
+datanoisetv_picoadk.build.usbvid=-DUSBD_VID=0x2e8a
+datanoisetv_picoadk.build.usbpid=-DUSBD_PID=0x000a
 datanoisetv_picoadk.build.usbpwr=-DUSBD_MAX_POWER_MA=250
 datanoisetv_picoadk.build.board=DATANOISETV_PICOADK
 datanoisetv_picoadk.build.mcu=cortex-m0plus
@@ -3446,8 +3432,6 @@ datanoisetv_picoadk.build.led=
 datanoisetv_picoadk.build.core=rp2040
 datanoisetv_picoadk.build.ldscript=memmap_default.ld
 datanoisetv_picoadk.build.boot2=boot2_w25q080_2_padded_checksum
-datanoisetv_picoadk.build.vid=0x2e8a
-datanoisetv_picoadk.build.pid=0x000a
 datanoisetv_picoadk.build.usb_manufacturer="DatanoiseTV"
 datanoisetv_picoadk.build.usb_product="PicoADK"
 datanoisetv_picoadk.menu.flash.2097152_0=2MB (no FS)
@@ -3618,7 +3602,8 @@ flyboard2040_core.vid.6=0x2e8a
 flyboard2040_core.pid.6=0xc08a
 flyboard2040_core.vid.7=0x2e8a
 flyboard2040_core.pid.7=0xc18a
-flyboard2040_core.build.usbpid=-DSERIALUSB_PID=0x008a
+flyboard2040_core.build.usbvid=-DUSBD_VID=0x2e8a
+flyboard2040_core.build.usbpid=-DUSBD_PID=0x008a
 flyboard2040_core.build.usbpwr=-DUSBD_MAX_POWER_MA=500
 flyboard2040_core.build.board=FLYBOARD2040_CORE
 flyboard2040_core.build.mcu=cortex-m0plus
@@ -3633,8 +3618,6 @@ flyboard2040_core.build.led=
 flyboard2040_core.build.core=rp2040
 flyboard2040_core.build.ldscript=memmap_default.ld
 flyboard2040_core.build.boot2=boot2_w25q080_2_padded_checksum
-flyboard2040_core.build.vid=0x2e8a
-flyboard2040_core.build.pid=0x008a
 flyboard2040_core.build.usb_manufacturer="DeRuiLab"
 flyboard2040_core.build.usb_product="FlyBoard2040Core"
 flyboard2040_core.menu.flash.4194304_0=4MB (no FS)
@@ -3817,7 +3800,8 @@ dfrobot_beetle_rp2040.vid.6=0x3343
 dfrobot_beetle_rp2040.pid.6=0xc253
 dfrobot_beetle_rp2040.vid.7=0x3343
 dfrobot_beetle_rp2040.pid.7=0xc353
-dfrobot_beetle_rp2040.build.usbpid=-DSERIALUSB_PID=0x4253
+dfrobot_beetle_rp2040.build.usbvid=-DUSBD_VID=0x3343
+dfrobot_beetle_rp2040.build.usbpid=-DUSBD_PID=0x4253
 dfrobot_beetle_rp2040.build.usbpwr=-DUSBD_MAX_POWER_MA=250
 dfrobot_beetle_rp2040.build.board=DFROBOT_BEETLE_RP2040
 dfrobot_beetle_rp2040.build.mcu=cortex-m0plus
@@ -3832,8 +3816,6 @@ dfrobot_beetle_rp2040.build.led=
 dfrobot_beetle_rp2040.build.core=rp2040
 dfrobot_beetle_rp2040.build.ldscript=memmap_default.ld
 dfrobot_beetle_rp2040.build.boot2=boot2_w25q080_2_padded_checksum
-dfrobot_beetle_rp2040.build.vid=0x3343
-dfrobot_beetle_rp2040.build.pid=0x4253
 dfrobot_beetle_rp2040.build.usb_manufacturer="DFRobot"
 dfrobot_beetle_rp2040.build.usb_product="Beetle RP2040"
 dfrobot_beetle_rp2040.menu.flash.2097152_0=2MB (no FS)
@@ -4004,7 +3986,8 @@ electroniccats_huntercat_nfc.vid.6=0x2E8A
 electroniccats_huntercat_nfc.pid.6=0xd037
 electroniccats_huntercat_nfc.vid.7=0x2E8A
 electroniccats_huntercat_nfc.pid.7=0xd137
-electroniccats_huntercat_nfc.build.usbpid=-DSERIALUSB_PID=0x1037
+electroniccats_huntercat_nfc.build.usbvid=-DUSBD_VID=0x2E8A
+electroniccats_huntercat_nfc.build.usbpid=-DUSBD_PID=0x1037
 electroniccats_huntercat_nfc.build.usbpwr=-DUSBD_MAX_POWER_MA=500
 electroniccats_huntercat_nfc.build.board=ELECTRONICCATS_HUNTERCAT_NFC
 electroniccats_huntercat_nfc.build.mcu=cortex-m0plus
@@ -4019,8 +4002,6 @@ electroniccats_huntercat_nfc.build.led=
 electroniccats_huntercat_nfc.build.core=rp2040
 electroniccats_huntercat_nfc.build.ldscript=memmap_default.ld
 electroniccats_huntercat_nfc.build.boot2=boot2_w25q080_2_padded_checksum
-electroniccats_huntercat_nfc.build.vid=0x2E8A
-electroniccats_huntercat_nfc.build.pid=0x1037
 electroniccats_huntercat_nfc.build.usb_manufacturer="ElectronicCats"
 electroniccats_huntercat_nfc.build.usb_product="HunterCat NFC RP2040"
 electroniccats_huntercat_nfc.menu.flash.2097152_0=2MB (no FS)
@@ -4191,7 +4172,8 @@ extelec_rc2040.vid.6=0x2e8a
 extelec_rc2040.pid.6=0xee20
 extelec_rc2040.vid.7=0x2e8a
 extelec_rc2040.pid.7=0xef20
-extelec_rc2040.build.usbpid=-DSERIALUSB_PID=0xee20
+extelec_rc2040.build.usbvid=-DUSBD_VID=0x2e8a
+extelec_rc2040.build.usbpid=-DUSBD_PID=0xee20
 extelec_rc2040.build.usbpwr=-DUSBD_MAX_POWER_MA=250
 extelec_rc2040.build.board=EXTREMEELEXTRONICS_RC2040
 extelec_rc2040.build.mcu=cortex-m0plus
@@ -4206,8 +4188,6 @@ extelec_rc2040.build.led=
 extelec_rc2040.build.core=rp2040
 extelec_rc2040.build.ldscript=memmap_default.ld
 extelec_rc2040.build.boot2=boot2_w25q080_2_padded_checksum
-extelec_rc2040.build.vid=0x2e8a
-extelec_rc2040.build.pid=0xee20
 extelec_rc2040.build.usb_manufacturer="ExtremeElectronics"
 extelec_rc2040.build.usb_product="RC2040"
 extelec_rc2040.menu.flash.2097152_0=2MB (no FS)
@@ -4378,7 +4358,8 @@ challenger_2040_lte.vid.6=0x2e8a
 challenger_2040_lte.pid.6=0xd00b
 challenger_2040_lte.vid.7=0x2e8a
 challenger_2040_lte.pid.7=0xd10b
-challenger_2040_lte.build.usbpid=-DSERIALUSB_PID=0x100b
+challenger_2040_lte.build.usbvid=-DUSBD_VID=0x2e8a
+challenger_2040_lte.build.usbpid=-DUSBD_PID=0x100b
 challenger_2040_lte.build.usbpwr=-DUSBD_MAX_POWER_MA=500
 challenger_2040_lte.build.board=CHALLENGER_2040_LTE_RP2040
 challenger_2040_lte.build.mcu=cortex-m0plus
@@ -4393,8 +4374,6 @@ challenger_2040_lte.build.led=
 challenger_2040_lte.build.core=rp2040
 challenger_2040_lte.build.ldscript=memmap_default.ld
 challenger_2040_lte.build.boot2=boot2_w25q080_2_padded_checksum
-challenger_2040_lte.build.vid=0x2e8a
-challenger_2040_lte.build.pid=0x100b
 challenger_2040_lte.build.usb_manufacturer="iLabs"
 challenger_2040_lte.build.usb_product="Challenger 2040 LTE"
 challenger_2040_lte.menu.flash.8388608_0=8MB (no FS)
@@ -4601,7 +4580,8 @@ challenger_2040_lora.vid.6=0x2e8a
 challenger_2040_lora.pid.6=0xd023
 challenger_2040_lora.vid.7=0x2e8a
 challenger_2040_lora.pid.7=0xd123
-challenger_2040_lora.build.usbpid=-DSERIALUSB_PID=0x1023
+challenger_2040_lora.build.usbvid=-DUSBD_VID=0x2e8a
+challenger_2040_lora.build.usbpid=-DUSBD_PID=0x1023
 challenger_2040_lora.build.usbpwr=-DUSBD_MAX_POWER_MA=250
 challenger_2040_lora.build.board=CHALLENGER_2040_LORA_RP2040
 challenger_2040_lora.build.mcu=cortex-m0plus
@@ -4616,8 +4596,6 @@ challenger_2040_lora.build.led=
 challenger_2040_lora.build.core=rp2040
 challenger_2040_lora.build.ldscript=memmap_default.ld
 challenger_2040_lora.build.boot2=boot2_w25q080_2_padded_checksum
-challenger_2040_lora.build.vid=0x2e8a
-challenger_2040_lora.build.pid=0x1023
 challenger_2040_lora.build.usb_manufacturer="iLabs"
 challenger_2040_lora.build.usb_product="Challenger 2040 LoRa"
 challenger_2040_lora.menu.flash.8388608_0=8MB (no FS)
@@ -4824,7 +4802,8 @@ challenger_2040_subghz.vid.6=0x2e8a
 challenger_2040_subghz.pid.6=0xd032
 challenger_2040_subghz.vid.7=0x2e8a
 challenger_2040_subghz.pid.7=0xd132
-challenger_2040_subghz.build.usbpid=-DSERIALUSB_PID=0x1032
+challenger_2040_subghz.build.usbvid=-DUSBD_VID=0x2e8a
+challenger_2040_subghz.build.usbpid=-DUSBD_PID=0x1032
 challenger_2040_subghz.build.usbpwr=-DUSBD_MAX_POWER_MA=250
 challenger_2040_subghz.build.board=CHALLENGER_2040_SUBGHZ_RP2040
 challenger_2040_subghz.build.mcu=cortex-m0plus
@@ -4839,8 +4818,6 @@ challenger_2040_subghz.build.led=
 challenger_2040_subghz.build.core=rp2040
 challenger_2040_subghz.build.ldscript=memmap_default.ld
 challenger_2040_subghz.build.boot2=boot2_w25q080_2_padded_checksum
-challenger_2040_subghz.build.vid=0x2e8a
-challenger_2040_subghz.build.pid=0x1032
 challenger_2040_subghz.build.usb_manufacturer="iLabs"
 challenger_2040_subghz.build.usb_product="Challenger 2040 SubGHz"
 challenger_2040_subghz.menu.flash.8388608_0=8MB (no FS)
@@ -5047,7 +5024,8 @@ challenger_2040_wifi.vid.6=0x2e8a
 challenger_2040_wifi.pid.6=0xd006
 challenger_2040_wifi.vid.7=0x2e8a
 challenger_2040_wifi.pid.7=0xd106
-challenger_2040_wifi.build.usbpid=-DSERIALUSB_PID=0x1006
+challenger_2040_wifi.build.usbvid=-DUSBD_VID=0x2e8a
+challenger_2040_wifi.build.usbpid=-DUSBD_PID=0x1006
 challenger_2040_wifi.build.usbpwr=-DUSBD_MAX_POWER_MA=250
 challenger_2040_wifi.build.board=CHALLENGER_2040_WIFI_RP2040
 challenger_2040_wifi.build.mcu=cortex-m0plus
@@ -5062,8 +5040,6 @@ challenger_2040_wifi.build.led=
 challenger_2040_wifi.build.core=rp2040
 challenger_2040_wifi.build.ldscript=memmap_default.ld
 challenger_2040_wifi.build.boot2=boot2_w25q080_2_padded_checksum
-challenger_2040_wifi.build.vid=0x2e8a
-challenger_2040_wifi.build.pid=0x1006
 challenger_2040_wifi.build.usb_manufacturer="iLabs"
 challenger_2040_wifi.build.usb_product="Challenger 2040 WiFi"
 challenger_2040_wifi.build.extra_flags=-DWIFIESPAT2
@@ -5271,7 +5247,8 @@ challenger_2040_wifi_ble.vid.6=0x2e8a
 challenger_2040_wifi_ble.pid.6=0xd02c
 challenger_2040_wifi_ble.vid.7=0x2e8a
 challenger_2040_wifi_ble.pid.7=0xd12c
-challenger_2040_wifi_ble.build.usbpid=-DSERIALUSB_PID=0x102C
+challenger_2040_wifi_ble.build.usbvid=-DUSBD_VID=0x2e8a
+challenger_2040_wifi_ble.build.usbpid=-DUSBD_PID=0x102C
 challenger_2040_wifi_ble.build.usbpwr=-DUSBD_MAX_POWER_MA=500
 challenger_2040_wifi_ble.build.board=CHALLENGER_2040_WIFI_BLE_RP2040
 challenger_2040_wifi_ble.build.mcu=cortex-m0plus
@@ -5286,8 +5263,6 @@ challenger_2040_wifi_ble.build.led=
 challenger_2040_wifi_ble.build.core=rp2040
 challenger_2040_wifi_ble.build.ldscript=memmap_default.ld
 challenger_2040_wifi_ble.build.boot2=boot2_w25q080_2_padded_checksum
-challenger_2040_wifi_ble.build.vid=0x2e8a
-challenger_2040_wifi_ble.build.pid=0x102C
 challenger_2040_wifi_ble.build.usb_manufacturer="iLabs"
 challenger_2040_wifi_ble.build.usb_product="Challenger 2040 WiFi/BLE"
 challenger_2040_wifi_ble.build.extra_flags=-DWIFIESPAT2
@@ -5495,7 +5470,8 @@ challenger_nb_2040_wifi.vid.6=0x2e8a
 challenger_nb_2040_wifi.pid.6=0xd00d
 challenger_nb_2040_wifi.vid.7=0x2e8a
 challenger_nb_2040_wifi.pid.7=0xd10d
-challenger_nb_2040_wifi.build.usbpid=-DSERIALUSB_PID=0x100d
+challenger_nb_2040_wifi.build.usbvid=-DUSBD_VID=0x2e8a
+challenger_nb_2040_wifi.build.usbpid=-DUSBD_PID=0x100d
 challenger_nb_2040_wifi.build.usbpwr=-DUSBD_MAX_POWER_MA=500
 challenger_nb_2040_wifi.build.board=CHALLENGER_NB_2040_WIFI_RP2040
 challenger_nb_2040_wifi.build.mcu=cortex-m0plus
@@ -5510,8 +5486,6 @@ challenger_nb_2040_wifi.build.led=
 challenger_nb_2040_wifi.build.core=rp2040
 challenger_nb_2040_wifi.build.ldscript=memmap_default.ld
 challenger_nb_2040_wifi.build.boot2=boot2_w25q080_2_padded_checksum
-challenger_nb_2040_wifi.build.vid=0x2e8a
-challenger_nb_2040_wifi.build.pid=0x100d
 challenger_nb_2040_wifi.build.usb_manufacturer="iLabs"
 challenger_nb_2040_wifi.build.usb_product="Challenger NB 2040 WiFi"
 challenger_nb_2040_wifi.build.extra_flags=-DWIFIESPAT2
@@ -5719,7 +5693,8 @@ challenger_2040_sdrtc.vid.6=0x2e8a
 challenger_2040_sdrtc.pid.6=0xd02d
 challenger_2040_sdrtc.vid.7=0x2e8a
 challenger_2040_sdrtc.pid.7=0xd12d
-challenger_2040_sdrtc.build.usbpid=-DSERIALUSB_PID=0x102d
+challenger_2040_sdrtc.build.usbvid=-DUSBD_VID=0x2e8a
+challenger_2040_sdrtc.build.usbpid=-DUSBD_PID=0x102d
 challenger_2040_sdrtc.build.usbpwr=-DUSBD_MAX_POWER_MA=250
 challenger_2040_sdrtc.build.board=CHALLENGER_NB_2040_SDRTC_RP2040
 challenger_2040_sdrtc.build.mcu=cortex-m0plus
@@ -5734,8 +5709,6 @@ challenger_2040_sdrtc.build.led=
 challenger_2040_sdrtc.build.core=rp2040
 challenger_2040_sdrtc.build.ldscript=memmap_default.ld
 challenger_2040_sdrtc.build.boot2=boot2_w25q080_2_padded_checksum
-challenger_2040_sdrtc.build.vid=0x2e8a
-challenger_2040_sdrtc.build.pid=0x102d
 challenger_2040_sdrtc.build.usb_manufacturer="iLabs"
 challenger_2040_sdrtc.build.usb_product="Challenger 2040 SD/RTC"
 challenger_2040_sdrtc.menu.flash.8388608_0=8MB (no FS)
@@ -5942,7 +5915,8 @@ challenger_2040_nfc.vid.6=0x2e8a
 challenger_2040_nfc.pid.6=0xd036
 challenger_2040_nfc.vid.7=0x2e8a
 challenger_2040_nfc.pid.7=0xd136
-challenger_2040_nfc.build.usbpid=-DSERIALUSB_PID=0x1036
+challenger_2040_nfc.build.usbvid=-DUSBD_VID=0x2e8a
+challenger_2040_nfc.build.usbpid=-DUSBD_PID=0x1036
 challenger_2040_nfc.build.usbpwr=-DUSBD_MAX_POWER_MA=250
 challenger_2040_nfc.build.board=CHALLENGER_NB_2040_NFC_RP2040
 challenger_2040_nfc.build.mcu=cortex-m0plus
@@ -5957,8 +5931,6 @@ challenger_2040_nfc.build.led=
 challenger_2040_nfc.build.core=rp2040
 challenger_2040_nfc.build.ldscript=memmap_default.ld
 challenger_2040_nfc.build.boot2=boot2_w25q080_2_padded_checksum
-challenger_2040_nfc.build.vid=0x2e8a
-challenger_2040_nfc.build.pid=0x1036
 challenger_2040_nfc.build.usb_manufacturer="iLabs"
 challenger_2040_nfc.build.usb_product="Challenger 2040 NFC"
 challenger_2040_nfc.menu.flash.8388608_0=8MB (no FS)
@@ -6165,7 +6137,8 @@ ilabs_rpico32.vid.6=0x2e8a
 ilabs_rpico32.pid.6=0xd010
 ilabs_rpico32.vid.7=0x2e8a
 ilabs_rpico32.pid.7=0xd110
-ilabs_rpico32.build.usbpid=-DSERIALUSB_PID=0x1010
+ilabs_rpico32.build.usbvid=-DUSBD_VID=0x2e8a
+ilabs_rpico32.build.usbpid=-DUSBD_PID=0x1010
 ilabs_rpico32.build.usbpwr=-DUSBD_MAX_POWER_MA=250
 ilabs_rpico32.build.board=ILABS_2040_RPICO32_RP2040
 ilabs_rpico32.build.mcu=cortex-m0plus
@@ -6180,8 +6153,6 @@ ilabs_rpico32.build.led=
 ilabs_rpico32.build.core=rp2040
 ilabs_rpico32.build.ldscript=memmap_default.ld
 ilabs_rpico32.build.boot2=boot2_w25q080_2_padded_checksum
-ilabs_rpico32.build.vid=0x2e8a
-ilabs_rpico32.build.pid=0x1010
 ilabs_rpico32.build.usb_manufacturer="iLabs"
 ilabs_rpico32.build.usb_product="RPICO32"
 ilabs_rpico32.menu.flash.8388608_0=8MB (no FS)
@@ -6388,7 +6359,8 @@ melopero_cookie_rp2040.vid.6=0x2e8a
 melopero_cookie_rp2040.pid.6=0xd011
 melopero_cookie_rp2040.vid.7=0x2e8a
 melopero_cookie_rp2040.pid.7=0xd111
-melopero_cookie_rp2040.build.usbpid=-DSERIALUSB_PID=0x1011
+melopero_cookie_rp2040.build.usbvid=-DUSBD_VID=0x2e8a
+melopero_cookie_rp2040.build.usbpid=-DUSBD_PID=0x1011
 melopero_cookie_rp2040.build.usbpwr=-DUSBD_MAX_POWER_MA=250
 melopero_cookie_rp2040.build.board=MELOPERO_COOKIE_RP2040
 melopero_cookie_rp2040.build.mcu=cortex-m0plus
@@ -6403,8 +6375,6 @@ melopero_cookie_rp2040.build.led=
 melopero_cookie_rp2040.build.core=rp2040
 melopero_cookie_rp2040.build.ldscript=memmap_default.ld
 melopero_cookie_rp2040.build.boot2=boot2_w25q080_2_padded_checksum
-melopero_cookie_rp2040.build.vid=0x2e8a
-melopero_cookie_rp2040.build.pid=0x1011
 melopero_cookie_rp2040.build.usb_manufacturer="Melopero"
 melopero_cookie_rp2040.build.usb_product="Cookie RP2040"
 melopero_cookie_rp2040.menu.flash.8388608_0=8MB (no FS)
@@ -6611,7 +6581,8 @@ melopero_shake_rp2040.vid.6=0x2e8a
 melopero_shake_rp2040.pid.6=0xd005
 melopero_shake_rp2040.vid.7=0x2e8a
 melopero_shake_rp2040.pid.7=0xd105
-melopero_shake_rp2040.build.usbpid=-DSERIALUSB_PID=0x1005
+melopero_shake_rp2040.build.usbvid=-DUSBD_VID=0x2e8a
+melopero_shake_rp2040.build.usbpid=-DUSBD_PID=0x1005
 melopero_shake_rp2040.build.usbpwr=-DUSBD_MAX_POWER_MA=250
 melopero_shake_rp2040.build.board=MELOPERO_SHAKE_RP2040
 melopero_shake_rp2040.build.mcu=cortex-m0plus
@@ -6626,8 +6597,6 @@ melopero_shake_rp2040.build.led=
 melopero_shake_rp2040.build.core=rp2040
 melopero_shake_rp2040.build.ldscript=memmap_default.ld
 melopero_shake_rp2040.build.boot2=boot2_w25q080_2_padded_checksum
-melopero_shake_rp2040.build.vid=0x2e8a
-melopero_shake_rp2040.build.pid=0x1005
 melopero_shake_rp2040.build.usb_manufacturer="Melopero"
 melopero_shake_rp2040.build.usb_product="Shake RP2040"
 melopero_shake_rp2040.menu.flash.16777216_0=16MB (no FS)
@@ -6882,7 +6851,8 @@ nullbits_bit_c_pro.vid.6=0x2e8a
 nullbits_bit_c_pro.pid.6=0xee61
 nullbits_bit_c_pro.vid.7=0x2e8a
 nullbits_bit_c_pro.pid.7=0xef61
-nullbits_bit_c_pro.build.usbpid=-DSERIALUSB_PID=0x6e61
+nullbits_bit_c_pro.build.usbvid=-DUSBD_VID=0x2e8a
+nullbits_bit_c_pro.build.usbpid=-DUSBD_PID=0x6e61
 nullbits_bit_c_pro.build.usbpwr=-DUSBD_MAX_POWER_MA=500
 nullbits_bit_c_pro.build.board=NULLBITS_BIT_C_PRO
 nullbits_bit_c_pro.build.mcu=cortex-m0plus
@@ -6897,8 +6867,6 @@ nullbits_bit_c_pro.build.led=
 nullbits_bit_c_pro.build.core=rp2040
 nullbits_bit_c_pro.build.ldscript=memmap_default.ld
 nullbits_bit_c_pro.build.boot2=boot2_w25x10cl_4_padded_checksum
-nullbits_bit_c_pro.build.vid=0x2e8a
-nullbits_bit_c_pro.build.pid=0x6e61
 nullbits_bit_c_pro.build.usb_manufacturer="nullbits"
 nullbits_bit_c_pro.build.usb_product="Bit-C PRO"
 nullbits_bit_c_pro.menu.flash.4194304_0=4MB (no FS)
@@ -7081,7 +7049,8 @@ pimoroni_pga2040.vid.6=0x2e8a
 pimoroni_pga2040.pid.6=0xd008
 pimoroni_pga2040.vid.7=0x2e8a
 pimoroni_pga2040.pid.7=0xd108
-pimoroni_pga2040.build.usbpid=-DSERIALUSB_PID=0x1008
+pimoroni_pga2040.build.usbvid=-DUSBD_VID=0x2e8a
+pimoroni_pga2040.build.usbpid=-DUSBD_PID=0x1008
 pimoroni_pga2040.build.usbpwr=-DUSBD_MAX_POWER_MA=250
 pimoroni_pga2040.build.board=PIMORONI_PGA2040
 pimoroni_pga2040.build.mcu=cortex-m0plus
@@ -7096,8 +7065,6 @@ pimoroni_pga2040.build.led=
 pimoroni_pga2040.build.core=rp2040
 pimoroni_pga2040.build.ldscript=memmap_default.ld
 pimoroni_pga2040.build.boot2=boot2_w25q64jv_4_padded_checksum
-pimoroni_pga2040.build.vid=0x2e8a
-pimoroni_pga2040.build.pid=0x1008
 pimoroni_pga2040.build.usb_manufacturer="Pimoroni"
 pimoroni_pga2040.build.usb_product="PGA2040"
 pimoroni_pga2040.menu.flash.8388608_0=8MB (no FS)
@@ -7304,7 +7271,8 @@ solderparty_rp2040_stamp.vid.6=0x1209
 solderparty_rp2040_stamp.pid.6=0xe182
 solderparty_rp2040_stamp.vid.7=0x1209
 solderparty_rp2040_stamp.pid.7=0xe182
-solderparty_rp2040_stamp.build.usbpid=-DSERIALUSB_PID=0xa182
+solderparty_rp2040_stamp.build.usbvid=-DUSBD_VID=0x1209
+solderparty_rp2040_stamp.build.usbpid=-DUSBD_PID=0xa182
 solderparty_rp2040_stamp.build.usbpwr=-DUSBD_MAX_POWER_MA=500
 solderparty_rp2040_stamp.build.board=SOLDERPARTY_RP2040_STAMP
 solderparty_rp2040_stamp.build.mcu=cortex-m0plus
@@ -7319,8 +7287,6 @@ solderparty_rp2040_stamp.build.led=
 solderparty_rp2040_stamp.build.core=rp2040
 solderparty_rp2040_stamp.build.ldscript=memmap_default.ld
 solderparty_rp2040_stamp.build.boot2=boot2_generic_03h_4_padded_checksum
-solderparty_rp2040_stamp.build.vid=0x1209
-solderparty_rp2040_stamp.build.pid=0xa182
 solderparty_rp2040_stamp.build.usb_manufacturer="Solder Party"
 solderparty_rp2040_stamp.build.usb_product="RP2040 Stamp"
 solderparty_rp2040_stamp.menu.flash.8388608_0=8MB (no FS)
@@ -7527,7 +7493,8 @@ sparkfun_promicrorp2040.vid.6=0x1b4f
 sparkfun_promicrorp2040.pid.6=0xc026
 sparkfun_promicrorp2040.vid.7=0x1b4f
 sparkfun_promicrorp2040.pid.7=0xc126
-sparkfun_promicrorp2040.build.usbpid=-DSERIALUSB_PID=0x0026
+sparkfun_promicrorp2040.build.usbvid=-DUSBD_VID=0x1b4f
+sparkfun_promicrorp2040.build.usbpid=-DUSBD_PID=0x0026
 sparkfun_promicrorp2040.build.usbpwr=-DUSBD_MAX_POWER_MA=250
 sparkfun_promicrorp2040.build.board=SPARKFUN_PROMICRO_RP2040
 sparkfun_promicrorp2040.build.mcu=cortex-m0plus
@@ -7542,8 +7509,6 @@ sparkfun_promicrorp2040.build.led=
 sparkfun_promicrorp2040.build.core=rp2040
 sparkfun_promicrorp2040.build.ldscript=memmap_default.ld
 sparkfun_promicrorp2040.build.boot2=boot2_generic_03h_4_padded_checksum
-sparkfun_promicrorp2040.build.vid=0x1b4f
-sparkfun_promicrorp2040.build.pid=0x0026
 sparkfun_promicrorp2040.build.usb_manufacturer="SparkFun"
 sparkfun_promicrorp2040.build.usb_product="ProMicro RP2040"
 sparkfun_promicrorp2040.menu.flash.16777216_0=16MB (no FS)
@@ -7798,7 +7763,8 @@ sparkfun_thingplusrp2040.vid.6=0x1b4f
 sparkfun_thingplusrp2040.pid.6=0xc026
 sparkfun_thingplusrp2040.vid.7=0x1b4f
 sparkfun_thingplusrp2040.pid.7=0xc126
-sparkfun_thingplusrp2040.build.usbpid=-DSERIALUSB_PID=0x0026
+sparkfun_thingplusrp2040.build.usbvid=-DUSBD_VID=0x1b4f
+sparkfun_thingplusrp2040.build.usbpid=-DUSBD_PID=0x0026
 sparkfun_thingplusrp2040.build.usbpwr=-DUSBD_MAX_POWER_MA=250
 sparkfun_thingplusrp2040.build.board=SPARKFUN_THINGPLUS_RP2040
 sparkfun_thingplusrp2040.build.mcu=cortex-m0plus
@@ -7813,8 +7779,6 @@ sparkfun_thingplusrp2040.build.led=
 sparkfun_thingplusrp2040.build.core=rp2040
 sparkfun_thingplusrp2040.build.ldscript=memmap_default.ld
 sparkfun_thingplusrp2040.build.boot2=boot2_w25q080_2_padded_checksum
-sparkfun_thingplusrp2040.build.vid=0x1b4f
-sparkfun_thingplusrp2040.build.pid=0x0026
 sparkfun_thingplusrp2040.build.usb_manufacturer="SparkFun"
 sparkfun_thingplusrp2040.build.usb_product="Thing Plus RP2040"
 sparkfun_thingplusrp2040.menu.flash.16777216_0=16MB (no FS)
@@ -8069,7 +8033,8 @@ upesy_rp2040_devkit.vid.6=0x2e8a
 upesy_rp2040_devkit.pid.6=0xd007
 upesy_rp2040_devkit.vid.7=0x2e8a
 upesy_rp2040_devkit.pid.7=0xd107
-upesy_rp2040_devkit.build.usbpid=-DSERIALUSB_PID=0x1007
+upesy_rp2040_devkit.build.usbvid=-DUSBD_VID=0x2e8a
+upesy_rp2040_devkit.build.usbpid=-DUSBD_PID=0x1007
 upesy_rp2040_devkit.build.usbpwr=-DUSBD_MAX_POWER_MA=250
 upesy_rp2040_devkit.build.board=UPESY_RP2040_DEVKIT
 upesy_rp2040_devkit.build.mcu=cortex-m0plus
@@ -8084,8 +8049,6 @@ upesy_rp2040_devkit.build.led=
 upesy_rp2040_devkit.build.core=rp2040
 upesy_rp2040_devkit.build.ldscript=memmap_default.ld
 upesy_rp2040_devkit.build.boot2=boot2_w25q080_2_padded_checksum
-upesy_rp2040_devkit.build.vid=0x2e8a
-upesy_rp2040_devkit.build.pid=0x1007
 upesy_rp2040_devkit.build.usb_manufacturer="uPesy"
 upesy_rp2040_devkit.build.usb_product="RP2040 DevKit"
 upesy_rp2040_devkit.menu.flash.2097152_0=2MB (no FS)
@@ -8256,7 +8219,8 @@ seeed_xiao_rp2040.vid.6=0x2e8a
 seeed_xiao_rp2040.pid.6=0xc00a
 seeed_xiao_rp2040.vid.7=0x2e8a
 seeed_xiao_rp2040.pid.7=0xc10a
-seeed_xiao_rp2040.build.usbpid=-DSERIALUSB_PID=0x000a
+seeed_xiao_rp2040.build.usbvid=-DUSBD_VID=0x2e8a
+seeed_xiao_rp2040.build.usbpid=-DUSBD_PID=0x000a
 seeed_xiao_rp2040.build.usbpwr=-DUSBD_MAX_POWER_MA=250
 seeed_xiao_rp2040.build.board=SEEED_XIAO_RP2040
 seeed_xiao_rp2040.build.mcu=cortex-m0plus
@@ -8271,8 +8235,6 @@ seeed_xiao_rp2040.build.led=
 seeed_xiao_rp2040.build.core=rp2040
 seeed_xiao_rp2040.build.ldscript=memmap_default.ld
 seeed_xiao_rp2040.build.boot2=boot2_w25q080_2_padded_checksum
-seeed_xiao_rp2040.build.vid=0x2e8a
-seeed_xiao_rp2040.build.pid=0x000a
 seeed_xiao_rp2040.build.usb_manufacturer="Seeed"
 seeed_xiao_rp2040.build.usb_product="XIAO RP2040"
 seeed_xiao_rp2040.menu.flash.2097152_0=2MB (no FS)
@@ -8443,7 +8405,8 @@ vccgnd_yd_rp2040.vid.6=0x2e8a
 vccgnd_yd_rp2040.pid.6=0xc00a
 vccgnd_yd_rp2040.vid.7=0x2e8a
 vccgnd_yd_rp2040.pid.7=0xc10a
-vccgnd_yd_rp2040.build.usbpid=-DSERIALUSB_PID=0x800a
+vccgnd_yd_rp2040.build.usbvid=-DUSBD_VID=0x2e8a
+vccgnd_yd_rp2040.build.usbpid=-DUSBD_PID=0x800a
 vccgnd_yd_rp2040.build.usbpwr=-DUSBD_MAX_POWER_MA=500
 vccgnd_yd_rp2040.build.board=YD_RP2040
 vccgnd_yd_rp2040.build.mcu=cortex-m0plus
@@ -8458,8 +8421,6 @@ vccgnd_yd_rp2040.build.led=
 vccgnd_yd_rp2040.build.core=rp2040
 vccgnd_yd_rp2040.build.ldscript=memmap_default.ld
 vccgnd_yd_rp2040.build.boot2=boot2_generic_03h_4_padded_checksum
-vccgnd_yd_rp2040.build.vid=0x2e8a
-vccgnd_yd_rp2040.build.pid=0x800a
 vccgnd_yd_rp2040.build.usb_manufacturer="VCC-GND"
 vccgnd_yd_rp2040.build.usb_product="YD RP2040"
 vccgnd_yd_rp2040.menu.flash.16777216_0=16MB (no FS)
@@ -8714,7 +8675,8 @@ viyalab_mizu.vid.6=0x2e8a
 viyalab_mizu.pid.6=0xc00a
 viyalab_mizu.vid.7=0x2e8a
 viyalab_mizu.pid.7=0xc10a
-viyalab_mizu.build.usbpid=-DSERIALUSB_PID=0x000a
+viyalab_mizu.build.usbvid=-DUSBD_VID=0x2e8a
+viyalab_mizu.build.usbpid=-DUSBD_PID=0x000a
 viyalab_mizu.build.usbpwr=-DUSBD_MAX_POWER_MA=250
 viyalab_mizu.build.board=VIYALAB_MIZU_RP2040
 viyalab_mizu.build.mcu=cortex-m0plus
@@ -8729,8 +8691,6 @@ viyalab_mizu.build.led=
 viyalab_mizu.build.core=rp2040
 viyalab_mizu.build.ldscript=memmap_default.ld
 viyalab_mizu.build.boot2=boot2_generic_03h_4_padded_checksum
-viyalab_mizu.build.vid=0x2e8a
-viyalab_mizu.build.pid=0x000a
 viyalab_mizu.build.usb_manufacturer="Viyalab"
 viyalab_mizu.build.usb_product="Mizu RP2040"
 viyalab_mizu.menu.flash.8388608_0=8MB (no FS)
@@ -8937,7 +8897,8 @@ waveshare_rp2040_zero.vid.6=0x2e8a
 waveshare_rp2040_zero.pid.6=0xc003
 waveshare_rp2040_zero.vid.7=0x2e8a
 waveshare_rp2040_zero.pid.7=0xc103
-waveshare_rp2040_zero.build.usbpid=-DSERIALUSB_PID=0x0003
+waveshare_rp2040_zero.build.usbvid=-DUSBD_VID=0x2e8a
+waveshare_rp2040_zero.build.usbpid=-DUSBD_PID=0x0003
 waveshare_rp2040_zero.build.usbpwr=-DUSBD_MAX_POWER_MA=500
 waveshare_rp2040_zero.build.board=WAVESHARE_RP2040_ZERO
 waveshare_rp2040_zero.build.mcu=cortex-m0plus
@@ -8952,8 +8913,6 @@ waveshare_rp2040_zero.build.led=
 waveshare_rp2040_zero.build.core=rp2040
 waveshare_rp2040_zero.build.ldscript=memmap_default.ld
 waveshare_rp2040_zero.build.boot2=boot2_w25q16jvxq_4_padded_checksum
-waveshare_rp2040_zero.build.vid=0x2e8a
-waveshare_rp2040_zero.build.pid=0x0003
 waveshare_rp2040_zero.build.usb_manufacturer="Waveshare"
 waveshare_rp2040_zero.build.usb_product="RP2040 Zero"
 waveshare_rp2040_zero.menu.flash.2097152_0=2MB (no FS)
@@ -9124,7 +9083,8 @@ waveshare_rp2040_one.vid.6=0x2e8a
 waveshare_rp2040_one.pid.6=0xd03a
 waveshare_rp2040_one.vid.7=0x2e8a
 waveshare_rp2040_one.pid.7=0xd13a
-waveshare_rp2040_one.build.usbpid=-DSERIALUSB_PID=0x103a
+waveshare_rp2040_one.build.usbvid=-DUSBD_VID=0x2e8a
+waveshare_rp2040_one.build.usbpid=-DUSBD_PID=0x103a
 waveshare_rp2040_one.build.usbpwr=-DUSBD_MAX_POWER_MA=500
 waveshare_rp2040_one.build.board=WAVESHARE_RP2040_ONE
 waveshare_rp2040_one.build.mcu=cortex-m0plus
@@ -9139,8 +9099,6 @@ waveshare_rp2040_one.build.led=
 waveshare_rp2040_one.build.core=rp2040
 waveshare_rp2040_one.build.ldscript=memmap_default.ld
 waveshare_rp2040_one.build.boot2=boot2_w25q16jvxq_4_padded_checksum
-waveshare_rp2040_one.build.vid=0x2e8a
-waveshare_rp2040_one.build.pid=0x103a
 waveshare_rp2040_one.build.usb_manufacturer="Waveshare"
 waveshare_rp2040_one.build.usb_product="RP2040 One"
 waveshare_rp2040_one.menu.flash.4194304_0=4MB (no FS)
@@ -9323,7 +9281,8 @@ waveshare_rp2040_plus_4mb.vid.6=0x2e8a
 waveshare_rp2040_plus_4mb.pid.6=0xd020
 waveshare_rp2040_plus_4mb.vid.7=0x2e8a
 waveshare_rp2040_plus_4mb.pid.7=0xd120
-waveshare_rp2040_plus_4mb.build.usbpid=-DSERIALUSB_PID=0x1020
+waveshare_rp2040_plus_4mb.build.usbvid=-DUSBD_VID=0x2e8a
+waveshare_rp2040_plus_4mb.build.usbpid=-DUSBD_PID=0x1020
 waveshare_rp2040_plus_4mb.build.usbpwr=-DUSBD_MAX_POWER_MA=500
 waveshare_rp2040_plus_4mb.build.board=WAVESHARE_RP2040_PLUS
 waveshare_rp2040_plus_4mb.build.mcu=cortex-m0plus
@@ -9338,8 +9297,6 @@ waveshare_rp2040_plus_4mb.build.led=
 waveshare_rp2040_plus_4mb.build.core=rp2040
 waveshare_rp2040_plus_4mb.build.ldscript=memmap_default.ld
 waveshare_rp2040_plus_4mb.build.boot2=boot2_w25q080_2_padded_checksum
-waveshare_rp2040_plus_4mb.build.vid=0x2e8a
-waveshare_rp2040_plus_4mb.build.pid=0x1020
 waveshare_rp2040_plus_4mb.build.usb_manufacturer="Waveshare"
 waveshare_rp2040_plus_4mb.build.usb_product="RP2040 Plus 4MB"
 waveshare_rp2040_plus_4mb.menu.flash.4194304_0=4MB (no FS)
@@ -9522,7 +9479,8 @@ waveshare_rp2040_plus_16mb.vid.6=0x2e8a
 waveshare_rp2040_plus_16mb.pid.6=0xd020
 waveshare_rp2040_plus_16mb.vid.7=0x2e8a
 waveshare_rp2040_plus_16mb.pid.7=0xd120
-waveshare_rp2040_plus_16mb.build.usbpid=-DSERIALUSB_PID=0x1020
+waveshare_rp2040_plus_16mb.build.usbvid=-DUSBD_VID=0x2e8a
+waveshare_rp2040_plus_16mb.build.usbpid=-DUSBD_PID=0x1020
 waveshare_rp2040_plus_16mb.build.usbpwr=-DUSBD_MAX_POWER_MA=500
 waveshare_rp2040_plus_16mb.build.board=WAVESHARE_RP2040_PLUS
 waveshare_rp2040_plus_16mb.build.mcu=cortex-m0plus
@@ -9537,8 +9495,6 @@ waveshare_rp2040_plus_16mb.build.led=
 waveshare_rp2040_plus_16mb.build.core=rp2040
 waveshare_rp2040_plus_16mb.build.ldscript=memmap_default.ld
 waveshare_rp2040_plus_16mb.build.boot2=boot2_w25q080_2_padded_checksum
-waveshare_rp2040_plus_16mb.build.vid=0x2e8a
-waveshare_rp2040_plus_16mb.build.pid=0x1020
 waveshare_rp2040_plus_16mb.build.usb_manufacturer="Waveshare"
 waveshare_rp2040_plus_16mb.build.usb_product="RP2040 Plus 16MB"
 waveshare_rp2040_plus_16mb.menu.flash.16777216_0=16MB (no FS)
@@ -9793,7 +9749,8 @@ waveshare_rp2040_lcd_0_96.vid.6=0x2e8a
 waveshare_rp2040_lcd_0_96.pid.6=0xd021
 waveshare_rp2040_lcd_0_96.vid.7=0x2e8a
 waveshare_rp2040_lcd_0_96.pid.7=0xd121
-waveshare_rp2040_lcd_0_96.build.usbpid=-DSERIALUSB_PID=0x1021
+waveshare_rp2040_lcd_0_96.build.usbvid=-DUSBD_VID=0x2e8a
+waveshare_rp2040_lcd_0_96.build.usbpid=-DUSBD_PID=0x1021
 waveshare_rp2040_lcd_0_96.build.usbpwr=-DUSBD_MAX_POWER_MA=500
 waveshare_rp2040_lcd_0_96.build.board=WAVESHARE_RP2040_LCD_0_96
 waveshare_rp2040_lcd_0_96.build.mcu=cortex-m0plus
@@ -9808,8 +9765,6 @@ waveshare_rp2040_lcd_0_96.build.led=
 waveshare_rp2040_lcd_0_96.build.core=rp2040
 waveshare_rp2040_lcd_0_96.build.ldscript=memmap_default.ld
 waveshare_rp2040_lcd_0_96.build.boot2=boot2_w25q16jvxq_4_padded_checksum
-waveshare_rp2040_lcd_0_96.build.vid=0x2e8a
-waveshare_rp2040_lcd_0_96.build.pid=0x1021
 waveshare_rp2040_lcd_0_96.build.usb_manufacturer="Waveshare"
 waveshare_rp2040_lcd_0_96.build.usb_product="RP2040 LCD 0.96"
 waveshare_rp2040_lcd_0_96.menu.flash.2097152_0=2MB (no FS)
@@ -9980,7 +9935,8 @@ waveshare_rp2040_lcd_1_28.vid.6=0x2e8a
 waveshare_rp2040_lcd_1_28.pid.6=0xd039
 waveshare_rp2040_lcd_1_28.vid.7=0x2e8a
 waveshare_rp2040_lcd_1_28.pid.7=0xd139
-waveshare_rp2040_lcd_1_28.build.usbpid=-DSERIALUSB_PID=0x1039
+waveshare_rp2040_lcd_1_28.build.usbvid=-DUSBD_VID=0x2e8a
+waveshare_rp2040_lcd_1_28.build.usbpid=-DUSBD_PID=0x1039
 waveshare_rp2040_lcd_1_28.build.usbpwr=-DUSBD_MAX_POWER_MA=500
 waveshare_rp2040_lcd_1_28.build.board=WAVESHARE_RP2040_LCD_1_28
 waveshare_rp2040_lcd_1_28.build.mcu=cortex-m0plus
@@ -9995,8 +9951,6 @@ waveshare_rp2040_lcd_1_28.build.led=
 waveshare_rp2040_lcd_1_28.build.core=rp2040
 waveshare_rp2040_lcd_1_28.build.ldscript=memmap_default.ld
 waveshare_rp2040_lcd_1_28.build.boot2=boot2_w25q16jvxq_4_padded_checksum
-waveshare_rp2040_lcd_1_28.build.vid=0x2e8a
-waveshare_rp2040_lcd_1_28.build.pid=0x1039
 waveshare_rp2040_lcd_1_28.build.usb_manufacturer="Waveshare"
 waveshare_rp2040_lcd_1_28.build.usb_product="RP2040 LCD 1.28"
 waveshare_rp2040_lcd_1_28.menu.flash.2097152_0=2MB (no FS)
@@ -10167,7 +10121,8 @@ wiznet_5100s_evb_pico.vid.6=0x2e8a
 wiznet_5100s_evb_pico.pid.6=0xd027
 wiznet_5100s_evb_pico.vid.7=0x2e8a
 wiznet_5100s_evb_pico.pid.7=0xd127
-wiznet_5100s_evb_pico.build.usbpid=-DSERIALUSB_PID=0x1027
+wiznet_5100s_evb_pico.build.usbvid=-DUSBD_VID=0x2e8a
+wiznet_5100s_evb_pico.build.usbpid=-DUSBD_PID=0x1027
 wiznet_5100s_evb_pico.build.usbpwr=-DUSBD_MAX_POWER_MA=250
 wiznet_5100s_evb_pico.build.board=WIZNET_5100S_EVB_PICO
 wiznet_5100s_evb_pico.build.mcu=cortex-m0plus
@@ -10182,8 +10137,6 @@ wiznet_5100s_evb_pico.build.led=
 wiznet_5100s_evb_pico.build.core=rp2040
 wiznet_5100s_evb_pico.build.ldscript=memmap_default.ld
 wiznet_5100s_evb_pico.build.boot2=boot2_w25q080_2_padded_checksum
-wiznet_5100s_evb_pico.build.vid=0x2e8a
-wiznet_5100s_evb_pico.build.pid=0x1027
 wiznet_5100s_evb_pico.build.usb_manufacturer="WIZnet"
 wiznet_5100s_evb_pico.build.usb_product="W5100S-EVB-Pico"
 wiznet_5100s_evb_pico.menu.flash.2097152_0=2MB (no FS)
@@ -10354,7 +10307,8 @@ wiznet_wizfi360_evb_pico.vid.6=0x2e8a
 wiznet_wizfi360_evb_pico.pid.6=0xd028
 wiznet_wizfi360_evb_pico.vid.7=0x2e8a
 wiznet_wizfi360_evb_pico.pid.7=0xd128
-wiznet_wizfi360_evb_pico.build.usbpid=-DSERIALUSB_PID=0x1028
+wiznet_wizfi360_evb_pico.build.usbvid=-DUSBD_VID=0x2e8a
+wiznet_wizfi360_evb_pico.build.usbpid=-DUSBD_PID=0x1028
 wiznet_wizfi360_evb_pico.build.usbpwr=-DUSBD_MAX_POWER_MA=250
 wiznet_wizfi360_evb_pico.build.board=WIZNET_WIZFI360_EVB_PICO
 wiznet_wizfi360_evb_pico.build.mcu=cortex-m0plus
@@ -10369,8 +10323,6 @@ wiznet_wizfi360_evb_pico.build.led=
 wiznet_wizfi360_evb_pico.build.core=rp2040
 wiznet_wizfi360_evb_pico.build.ldscript=memmap_default.ld
 wiznet_wizfi360_evb_pico.build.boot2=boot2_w25q080_2_padded_checksum
-wiznet_wizfi360_evb_pico.build.vid=0x2e8a
-wiznet_wizfi360_evb_pico.build.pid=0x1028
 wiznet_wizfi360_evb_pico.build.usb_manufacturer="WIZnet"
 wiznet_wizfi360_evb_pico.build.usb_product="WizFi360-EVB-Pico"
 wiznet_wizfi360_evb_pico.menu.flash.2097152_0=2MB (no FS)
@@ -10541,7 +10493,8 @@ wiznet_5500_evb_pico.vid.6=0x2e8a
 wiznet_5500_evb_pico.pid.6=0xd029
 wiznet_5500_evb_pico.vid.7=0x2e8a
 wiznet_5500_evb_pico.pid.7=0xd129
-wiznet_5500_evb_pico.build.usbpid=-DSERIALUSB_PID=0x1029
+wiznet_5500_evb_pico.build.usbvid=-DUSBD_VID=0x2e8a
+wiznet_5500_evb_pico.build.usbpid=-DUSBD_PID=0x1029
 wiznet_5500_evb_pico.build.usbpwr=-DUSBD_MAX_POWER_MA=250
 wiznet_5500_evb_pico.build.board=WIZNET_5500_EVB_PICO
 wiznet_5500_evb_pico.build.mcu=cortex-m0plus
@@ -10556,8 +10509,6 @@ wiznet_5500_evb_pico.build.led=
 wiznet_5500_evb_pico.build.core=rp2040
 wiznet_5500_evb_pico.build.ldscript=memmap_default.ld
 wiznet_5500_evb_pico.build.boot2=boot2_w25q080_2_padded_checksum
-wiznet_5500_evb_pico.build.vid=0x2e8a
-wiznet_5500_evb_pico.build.pid=0x1029
 wiznet_5500_evb_pico.build.usb_manufacturer="WIZnet"
 wiznet_5500_evb_pico.build.usb_product="W5500-EVB-Pico"
 wiznet_5500_evb_pico.menu.flash.2097152_0=2MB (no FS)
@@ -10728,7 +10679,8 @@ generic.vid.6=0x2e8a
 generic.pid.6=0xf00a
 generic.vid.7=0x2e8a
 generic.pid.7=0xf10a
-generic.build.usbpid=-DSERIALUSB_PID=0xf00a
+generic.build.usbvid=-DUSBD_VID=0x2e8a
+generic.build.usbpid=-DUSBD_PID=0xf00a
 generic.build.usbpwr=-DUSBD_MAX_POWER_MA=250
 generic.build.board=GENERIC_RP2040
 generic.build.mcu=cortex-m0plus
@@ -10743,8 +10695,6 @@ generic.build.led=
 generic.build.core=rp2040
 generic.build.ldscript=memmap_default.ld
 generic.build.boot2=boot2_generic_03h_4_padded_checksum
-generic.build.vid=0x2e8a
-generic.build.pid=0xf00a
 generic.build.usb_manufacturer="Generic"
 generic.build.usb_product="RP2040"
 generic.menu.flash.2097152_0=2MB (no FS)
@@ -10899,6 +10849,8 @@ generic.menu.boot2.boot2_w25q64jv_4_padded_checksum=W25Q64JV QSPI /4
 generic.menu.boot2.boot2_w25q64jv_4_padded_checksum.build.boot2=boot2_w25q64jv_4_padded_checksum
 generic.menu.boot2.boot2_w25q16jvxq_4_padded_checksum=W25Q16JVxQ QSPI /4
 generic.menu.boot2.boot2_w25q16jvxq_4_padded_checksum.build.boot2=boot2_w25q16jvxq_4_padded_checksum
+generic.menu.boot2.boot2_w25q128jvxq_4_padded_checksum=W25Q128JV QSPI /4
+generic.menu.boot2.boot2_w25q128jvxq_4_padded_checksum.build.boot2=boot2_w25q128jvxq_4_padded_checksum
 generic.menu.uploadmethod.default=Default (UF2)
 generic.menu.uploadmethod.default.build.ram_length=256k
 generic.menu.uploadmethod.default.build.debugscript=picoprobe.tcl
@@ -0,0 +1,23 @@
+// Padded and checksummed version of: generated\Winbond\W25Q128JVxQ\boot2.bin by @maxgerhardt
+
+.cpu cortex-m0plus
+.thumb
+
+.section .boot2, "ax"
+
+.byte 0xf7, 0xb5, 0x73, 0x46, 0x21, 0x22, 0x02, 0x26, 0x01, 0x93, 0x29, 0x4b, 0xc0, 0x24, 0x5a, 0x60
+.byte 0x9a, 0x68, 0x00, 0x27, 0xb2, 0x43, 0xda, 0x60, 0x9a, 0x60, 0x1a, 0x61, 0x5a, 0x61, 0x04, 0x23
+.byte 0x01, 0x25, 0x64, 0x05, 0xa7, 0x60, 0x63, 0x61, 0x22, 0x4b, 0x30, 0x00, 0x1d, 0x60, 0xe0, 0x23
+.byte 0xdb, 0x02, 0x23, 0x60, 0x35, 0x23, 0xa5, 0x60, 0x23, 0x66, 0x23, 0x66, 0x00, 0xf0, 0x4a, 0xf8
+.byte 0xc0, 0xb2, 0xb0, 0x42, 0x12, 0xd0, 0x06, 0x23, 0x28, 0x00, 0x23, 0x66, 0x00, 0xf0, 0x42, 0xf8
+.byte 0x25, 0x66, 0x03, 0x20, 0x27, 0x66, 0x26, 0x66, 0x00, 0xf0, 0x3c, 0xf8, 0x03, 0x36, 0x26, 0x66
+.byte 0x02, 0x20, 0x26, 0x66, 0x00, 0xf0, 0x36, 0xf8, 0x28, 0x42, 0xf8, 0xd1, 0x00, 0x25, 0x12, 0x4b
+.byte 0xa5, 0x60, 0x12, 0x4f, 0x23, 0x60, 0x12, 0x4b, 0x65, 0x60, 0x01, 0x26, 0x3b, 0x60, 0xeb, 0x23
+.byte 0xa6, 0x60, 0x23, 0x66, 0x4b, 0x3b, 0x23, 0x66, 0x02, 0x20, 0x00, 0xf0, 0x23, 0xf8, 0x0d, 0x4b
+.byte 0xa5, 0x60, 0x3b, 0x60, 0xa6, 0x60, 0x01, 0x9b, 0xab, 0x42, 0x08, 0xd1, 0x0a, 0x4b, 0x0b, 0x4a
+.byte 0x13, 0x60, 0x1b, 0x68, 0x83, 0xf3, 0x08, 0x88, 0x09, 0x4b, 0x1b, 0x68, 0x18, 0x47, 0xf7, 0xbd
+.byte 0x00, 0x00, 0x02, 0x40, 0xf0, 0x00, 0x00, 0x18, 0x00, 0x03, 0x5f, 0x00, 0xf4, 0x00, 0x00, 0x18
+.byte 0x21, 0x22, 0x00, 0x00, 0x22, 0x20, 0x00, 0xa0, 0x00, 0x01, 0x00, 0x10, 0x08, 0xed, 0x00, 0xe0
+.byte 0x04, 0x01, 0x00, 0x10, 0xc0, 0x22, 0x03, 0x00, 0x04, 0x21, 0x52, 0x05, 0x90, 0x6a, 0x08, 0x42
+.byte 0xfc, 0xd0, 0x01, 0x21, 0x90, 0x6a, 0x08, 0x42, 0xfc, 0xd1, 0x01, 0x3b, 0xdb, 0xb2, 0x10, 0x6e
+.byte 0x00, 0x2b, 0xfa, 0xd1, 0x70, 0x47, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xaa, 0xa0, 0xf0, 0x2f
@@ -107,6 +107,9 @@ extern bool __isFreeRTOS;

 #ifdef __cplusplus

+// emptyString is an ESP-ism, a constant string with ""
+extern const String emptyString;
+
 #ifdef USE_TINYUSB
 // Needed for declaring Serial
 #include "Adafruit_USBD_CDC.h"
@@ -46,12 +46,11 @@ mutex_t __usb_mutex;
 #define USB_TASK_INTERVAL 1000
 static int __usb_task_irq;

-// USB VID/PID (note that PID can change depending on the add'l interfaces)
+#ifndef USBD_VID
 #define USBD_VID (0x2E8A) // Raspberry Pi
+#endif

-#ifdef SERIALUSB_PID
-#define USBD_PID (SERIALUSB_PID)
-#else
+#ifndef USBD_PID
 #define USBD_PID (0x000a) // Raspberry Pi Pico SDK CDC
 #endif

@@ -1,5 +1,5 @@
 #pragma once
 #define ARDUINO_PICO_MAJOR 2
 #define ARDUINO_PICO_MINOR 7
-#define ARDUINO_PICO_REVISION 1
-#define ARDUINO_PICO_VERSION_STR "2.7.1"
+#define ARDUINO_PICO_REVISION 2
+#define ARDUINO_PICO_VERSION_STR "2.7.2"
@@ -134,6 +134,20 @@ void SerialUART::begin(unsigned long baud, uint16_t config) {
    _overflow = false;
    _queue = new uint8_t[_fifoSize];
    _baud = baud;
+
+    _fcnTx = gpio_get_function(_tx);
+    _fcnRx = gpio_get_function(_rx);
+    gpio_set_function(_tx, GPIO_FUNC_UART);
+    gpio_set_function(_rx, GPIO_FUNC_UART);
+    if (_rts != UART_PIN_NOT_DEFINED) {
+        _fcnRts = gpio_get_function(_rts);
+        gpio_set_function(_rts, GPIO_FUNC_UART);
+    }
+    if (_cts != UART_PIN_NOT_DEFINED) {
+        _fcnCts = gpio_get_function(_cts);
+        gpio_set_function(_cts, GPIO_FUNC_UART);
+    }
+
    uart_init(_uart, baud);
    int bits, stop;
    uart_parity_t parity;
@@ -171,18 +185,6 @@ void SerialUART::begin(unsigned long baud, uint16_t config) {
        break;
    }
    uart_set_format(_uart, bits, stop, parity);
-    _fcnTx = gpio_get_function(_tx);
-    _fcnRx = gpio_get_function(_rx);
-    gpio_set_function(_tx, GPIO_FUNC_UART);
-    gpio_set_function(_rx, GPIO_FUNC_UART);
-    if (_rts != UART_PIN_NOT_DEFINED) {
-        _fcnRts = gpio_get_function(_rts);
-        gpio_set_function(_rts, GPIO_FUNC_UART);
-    }
-    if (_cts != UART_PIN_NOT_DEFINED) {
-        _fcnCts = gpio_get_function(_cts);
-        gpio_set_function(_cts, GPIO_FUNC_UART);
-    }
    uart_set_hw_flow(_uart, _rts != UART_PIN_NOT_DEFINED, _cts != UART_PIN_NOT_DEFINED);
    _writer = 0;
    _reader = 0;
@@ -200,6 +202,7 @@ void SerialUART::begin(unsigned long baud, uint16_t config) {
    } else {
        // Polling mode has no IRQs used
    }
+    _break = false;
    _running = true;
 }

@@ -288,13 +291,22 @@ int SerialUART::read() {
 }

 bool SerialUART::overflow() {
-    CoreMutex m(&_mutex);
-    if (!_running || !m) {
+    if (!_running) {
        return false;
    }
-    bool hold = _overflow;
+
+    if (_polling) {
+        _handleIRQ(false);
+    } else {
+        _pumpFIFO();
+    }
+
+    mutex_enter_blocking(&_fifoMutex);
+    bool ovf = _overflow;
    _overflow = false;
-    return hold;
+    mutex_exit(&_fifoMutex);
+
+    return ovf;
 }

 int SerialUART::available() {
@@ -365,6 +377,25 @@ SerialUART::operator bool() {
    return _running;
 }

+bool SerialUART::getBreakReceived() {
+    if (!_running) {
+        return false;
+    }
+
+    if (_polling) {
+        _handleIRQ(false);
+    } else {
+        _pumpFIFO();
+    }
+
+    mutex_enter_blocking(&_fifoMutex);
+    bool break_received = _break;
+    _break = false;
+    mutex_exit(&_fifoMutex);
+
+    return break_received;
+}
+
 void arduino::serialEvent1Run(void) {
    if (serialEvent1 && Serial1.available()) {
        serialEvent1();
@@ -391,8 +422,12 @@ void __not_in_flash_func(SerialUART::_handleIRQ)(bool inIRQ) {
    uart_get_hw(_uart)->icr = UART_UARTICR_RTIC_BITS | UART_UARTICR_RXIC_BITS;
    while (uart_is_readable(_uart)) {
        uint32_t raw = uart_get_hw(_uart)->dr;
-        if (raw & 0x700) {
-            // Framing, Parity, or Break.  Ignore this bad char
+        if (raw & 0x400) {
+            // break!
+            _break = true;
+            continue;
+        } else if (raw & 0x300) {
+            // Framing, Parity Error.  Ignore this bad char
            continue;
        }
        uint8_t val = raw & 0xff;
@@ -63,9 +63,18 @@ public:
    bool overflow();
    operator bool() override;

+    // ESP8266 compat
+    void setDebugOutput(bool unused) {
+        (void) unused;
+    }
+
    // Not to be called by users, only from the IRQ handler.  In public so that the C-language IQR callback can access it
    void _handleIRQ(bool inIRQ = true);

+    // Allows the user to sleep until a break is received (self-clears the flag
+    // on read)
+    bool getBreakReceived();
+
 private:
    bool _running = false;
    uart_inst_t *_uart;
@@ -76,6 +85,7 @@ private:
    mutex_t _mutex;
    bool _polling = false;
    bool _overflow;
+    bool _break;

    // Lockless, IRQ-handled circular queue
    uint32_t _writer;
@@ -33,6 +33,7 @@
 #include "pico/mutex.h"
 #include "hardware/watchdog.h"
 #include "pico/unique_id.h"
+#include "hardware/resets.h"

 #ifndef DISABLE_USB_SERIAL
 // Ensure we are installed in the USB chain
@@ -174,8 +175,18 @@ SerialUSB::operator bool() {
 static bool _dtr = false;
 static bool _rts = false;
 static int _bps = 115200;
+static bool _rebooting = false;
 static void CheckSerialReset() {
-    if ((_bps == 1200) && (!_dtr)) {
+    __holdUpPendSV = 1; // Ensure we don't get swapped out by FreeRTOS
+    if (!_rebooting && (_bps == 1200) && (!_dtr)) {
+        _rebooting = true;
+        // Disable NVIC IRQ, so that we don't get bothered anymore
+        irq_set_enabled(USBCTRL_IRQ, false);
+        // Reset the whole USB hardware block
+        reset_block(RESETS_RESET_USBCTRL_BITS);
+        unreset_block(RESETS_RESET_USBCTRL_BITS);
+        // Delay a bit, so the PC can figure out that we have disconnected.
+        sleep_ms(3);
        reset_usb_boot(0, 0);
        while (1); // WDT will fire here
    }
@@ -44,6 +44,11 @@ public:
    using Print::write;
    operator bool() override;

+    // ESP8266 compat
+    void setDebugOutput(bool unused) {
+        (void) unused;
+    }
+
 private:
    bool _running = false;
 };
@@ -18,6 +18,8 @@
    Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
 */

+#pragma once
+
 #if !defined(DEBUG_RP2040_PORT)
 #define DEBUGV(...) do { } while(0)
 #define DEBUGCORE(...) do { } while(0)
@@ -44,3 +46,7 @@
 #define DEBUGSPI(...) do { } while(0)
 #endif
 #endif
+
+#ifdef __cplusplus
+extern void hexdump(const void* mem, uint32_t len, uint8_t cols = 16);
+#endif
@@ -170,3 +170,30 @@ extern "C" struct _reent *__wrap___getreent() {
        return _impure_ptr1;
    }
 }
+
+// ESP8266 internal debug routine
+extern void hexdump(const void* mem, uint32_t len, uint8_t cols)  __attribute__((weak));
+void hexdump(const void* mem, uint32_t len, uint8_t cols) {
+    const char* src = (const char*)mem;
+    printf("\n[HEXDUMP] Address: %p len: 0x%lX (%ld)", src, len, len);
+    while (len > 0) {
+        uint32_t linesize = cols > len ? len : cols;
+        printf("\n[%p] 0x%04x: ", src, (int)(src - (const char*)mem));
+        for (uint32_t i = 0; i < linesize; i++) {
+            printf("%02x ", *(src + i));
+        }
+        printf("  ");
+        for (uint32_t i = linesize; i < cols; i++) {
+            printf("   ");
+        }
+        for (uint32_t i = 0; i < linesize; i++) {
+            unsigned char c = *(src + i);
+            putc(isprint(c) ? c : '.', stdout);
+        }
+        src += linesize;
+        len -= linesize;
+    }
+    printf("\n");
+}
+
+const String emptyString = "";
@@ -54,9 +54,9 @@ author = u'Earle F. Philhower, III'
 # built documents.
 #
 # The short X.Y version.
-version = u'2.7.1'
+version = u'2.7.2'
 # The full version, including alpha/beta/rc tags.
-release = u'2.7.1'
+release = u'2.7.2'

 # The language for content autogenerated by Sphinx. Refer to documentation
 # for a list of supported languages.
@@ -69,6 +69,7 @@ AudioBufferManager::AudioBufferManager(size_t bufferCount, size_t bufferWords, i
 }

 AudioBufferManager::~AudioBufferManager() {
+    noInterrupts();
    if (_running) {
        _running = false;
        for (auto i = 0; i < 2; i++) {
@@ -76,6 +77,7 @@ AudioBufferManager::~AudioBufferManager() {
            __channelMap[_channelDMA[i]] = nullptr;
            dma_channel_abort(_channelDMA[i]);
            dma_channel_unclaim(_channelDMA[i]);
+            dma_channel_acknowledge_irq0(_channelDMA[i]);
        }
        __channelCount--;
        if (!__channelCount) {
@@ -84,6 +86,7 @@ AudioBufferManager::~AudioBufferManager() {
            irq_remove_handler(DMA_IRQ_0, _irq);
        }
    }
+    interrupts();
    for (int i = 0; i < 2; i++) {
        if (_active[i] != _silence) {
            _deleteAudioBuffer(_active[i]);
@@ -0,0 +1,29 @@
+/**
+   simple demo to show sha1 calculation
+*/
+#include <Arduino.h>
+#include <Hash.h>
+
+void setup() {
+  Serial.begin(115200);
+}
+
+void loop() {
+
+  // usage as String
+  // SHA1:a9993e364706816aba3e25717850c26c9cd0d89d
+
+  Serial.print("SHA1:");
+  Serial.println(sha1("abc"));
+
+  // usage as ptr
+  // SHA1:a94a8fe5ccb19ba61c4c0873d391e987982fbbd3
+  uint8_t hash[20];
+  sha1("test", &hash[0]);
+
+  Serial.print("SHA1:");
+  for (uint16_t i = 0; i < 20; i++) { Serial.printf("%02x", hash[i]); }
+  Serial.println();
+
+  delay(1000);
+}
@@ -0,0 +1,23 @@
+#######################################
+# Syntax Coloring Map For Hash
+#######################################
+
+#######################################
+# Library (KEYWORD3)
+#######################################
+
+Hash	KEYWORD3		RESERVED_WORD
+
+#######################################
+# Datatypes (KEYWORD1)
+#######################################
+
+#######################################
+# Methods and Functions (KEYWORD2)
+#######################################
+
+sha1	KEYWORD2
+
+#######################################
+# Constants (LITERAL1)
+#######################################
@@ -0,0 +1,10 @@
+name=Hash
+version=1.0
+author=Markus Sattler
+maintainer=Markus Sattler 
+sentence=Generate Hash from data
+paragraph=
+category=Data Processing
+url=
+architectures=rp2040
+dot_a_linkage=true
@@ -0,0 +1,96 @@
+/**
+ * @file Hash.cpp
+ * @date 20.05.2015
+ * @author Markus Sattler
+ *
+ * Copyright (c) 2015 Markus Sattler. All rights reserved.
+ * This file is part of the esp8266 core for Arduino environment.
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#include <Arduino.h>
+#include <bearssl/bearssl_hash.h>
+
+#include "Hash.h"
+
+/**
+ * create a sha1 hash from data
+ * @param data uint8_t *
+ * @param size uint32_t
+ * @param hash uint8_t[20]
+ */
+void sha1(const uint8_t* data, uint32_t size, uint8_t hash[20]) {
+    br_sha1_context ctx;
+
+#ifdef DEBUG_SHA1
+    os_printf("DATA:");
+    for(uint16_t i = 0; i < size; i++) {
+        os_printf("%02X", data[i]);
+    }
+    os_printf("\n");
+    os_printf("DATA:");
+    for(uint16_t i = 0; i < size; i++) {
+        os_printf("%c", data[i]);
+    }
+    os_printf("\n");
+#endif
+
+    br_sha1_init(&ctx);
+    br_sha1_update(&ctx, data, size);
+    br_sha1_out(&ctx, hash);
+
+#ifdef DEBUG_SHA1
+    os_printf("SHA1:");
+    for(uint16_t i = 0; i < 20; i++) {
+        os_printf("%02X", hash[i]);
+    }
+    os_printf("\n\n");
+#endif
+}
+
+void sha1(const char* data, uint32_t size, uint8_t hash[20]) {
+    sha1((const uint8_t *) data, size, hash);
+}
+
+void sha1(const String& data, uint8_t hash[20]) {
+    sha1(data.c_str(), data.length(), hash);
+}
+
+String sha1(const uint8_t* data, uint32_t size) {
+    uint8_t hash[20];
+    String hashStr((const char*)nullptr);
+    hashStr.reserve(20 * 2 + 1);
+
+    sha1(&data[0], size, &hash[0]);
+
+    for(uint16_t i = 0; i < 20; i++) {
+        char hex[3];
+        snprintf(hex, sizeof(hex), "%02x", hash[i]);
+        hashStr += hex;
+    }
+
+    return hashStr;
+}
+
+String sha1(const char* data, uint32_t size) {
+    return sha1((const uint8_t*) data, size);
+}
+
+String sha1(const String& data) {
+    return sha1(data.c_str(), data.length());
+}
+
@@ -0,0 +1,38 @@
+/**
+ * @file Hash.h
+ * @date 20.05.2015
+ * @author Markus Sattler
+ *
+ * Copyright (c) 2015 Markus Sattler. All rights reserved.
+ * This file is part of the esp8266 core for Arduino environment.
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#ifndef HASH_H_
+#define HASH_H_
+
+//#define DEBUG_SHA1
+
+void sha1(const uint8_t* data, uint32_t size, uint8_t hash[20]);
+void sha1(const char* data, uint32_t size, uint8_t hash[20]);
+void sha1(const String& data, uint8_t hash[20]);
+
+String sha1(const uint8_t* data, uint32_t size);
+String sha1(const char* data, uint32_t size);
+String sha1(const String& data);
+
+#endif /* HASH_H_ */
@@ -38,6 +38,7 @@ public:

    //PORTENTA_H7 min -12 max 51
    //NANO 33 BLE SENSe min 0 max 80
+    //NICLA_VISION min 0 max 8
    void setGain(int gain);
    void setBufferSize(int bufferSize);
    size_t getBufferSize();
@@ -56,6 +57,8 @@ private:
    int _gain;
    int _init;

+    int _cutSamples;
+
    // Hardware peripherals used
    uint _dmaChannel;
    PIO _pio;
@@ -20,7 +20,7 @@ uint8_t rawBuffer1[RAW_BUFFER_SIZE];
 uint8_t* rawBuffer[2] = {rawBuffer0, rawBuffer1};
 volatile int rawBufferIndex = 0;

-int decimation = 64;
+int decimation = 128;

 // final buffer is the one to be filled with PCM data
 int16_t* volatile finalBuffer;
@@ -45,6 +45,7 @@ PDMClass::PDMClass(int dinPin, int clkPin, int pwrPin) :
    _channels(-1),
    _samplerate(-1),
    _init(-1),
+    _cutSamples(100),
    _dmaChannel(0),
    _pio(nullptr),
    _smIdx(-1),
@@ -55,6 +56,12 @@ PDMClass::~PDMClass() {
 }

 int PDMClass::begin(int channels, int sampleRate) {
+
+    if (_init == 1) {
+        //ERROR: please call end first
+        return 0;
+    }
+
    //_channels = channels; // only one channel available

    // clear the final buffers
@@ -63,6 +70,18 @@ int PDMClass::begin(int channels, int sampleRate) {
    int finalBufferLength = _doubleBuffer.availableForWrite() / sizeof(int16_t);
    _doubleBuffer.swap(0);

+    // The mic accepts an input clock from 1.2 to 3.25 Mhz
+    // Setup the decimation factor accordingly
+    if ((sampleRate * decimation * 2) > 3250000) {
+        decimation = 64;
+    }
+
+    // Sanity check, abort if still over 3.25Mhz
+    if ((sampleRate * decimation * 2) > 3250000) {
+        //ERROR:  Sample rate too high, the mic would glitch
+        return -1;
+    }
+
    int rawBufferLength = RAW_BUFFER_SIZE / (decimation / 8);
    // Saturate number of samples. Remaining bytes are dropped.
    if (rawBufferLength > finalBufferLength) {
@@ -71,6 +90,7 @@ int PDMClass::begin(int channels, int sampleRate) {

    /* Initialize Open PDM library */
    filter.Fs = sampleRate;
+    filter.MaxVolume = 1;
    filter.nSamples = rawBufferLength;
    filter.LP_HZ = sampleRate / 2;
    filter.HP_HZ = 10;
@@ -88,7 +108,7 @@ int PDMClass::begin(int channels, int sampleRate) {

    if (!_pdmPgm.prepare(&_pio, &_smIdx, &_pgmOffset)) {
        // ERROR, no free slots
-        return -1;
+        return 0;
    }
    pdm_pio_program_init(_pio, _smIdx, _pgmOffset, _clkPin, _dinPin, clkDiv);

@@ -118,14 +138,29 @@ int PDMClass::begin(int channels, int sampleRate) {
                          true                // Start immediately
                         );

+    _cutSamples = 100;
+
    _init = 1;

    return 1;
 }

 void PDMClass::end() {
+
+    if (_init != 1) {
+        return;
+    }
+
+    dma_channel_set_irq0_enabled(_dmaChannel, false);
    dma_channel_abort(_dmaChannel);
+    dma_channel_unclaim(_dmaChannel);
+    irq_remove_handler(DMA_IRQ_0, dmaHandler);
+    pio_sm_unclaim(_pio, _smIdx);
    pinMode(_clkPin, INPUT);
+    rawBufferIndex = 0;
+    _pgmOffset = -1;
+
+    _init = 0;
 }

 int PDMClass::available() {
@@ -163,7 +198,6 @@ void PDMClass::setBufferSize(int bufferSize) {
 }

 void PDMClass::IrqHandler(bool halftranfer) {
-    static int cutSamples = 100;

    // Clear the interrupt request.
    dma_hw->ints0 = 1u << _dmaChannel;
@@ -171,24 +205,25 @@ void PDMClass::IrqHandler(bool halftranfer) {
    int shadowIndex = rawBufferIndex ^ 1;
    dma_channel_set_write_addr(_dmaChannel, rawBuffer[shadowIndex], true);

-    if (_doubleBuffer.available()) {
-        // buffer overflow, stop
-        return end();
+    if (!_doubleBuffer.available()) {
+        // fill final buffer with PCM samples
+        if (filter.Decimation == 128) {
+            Open_PDM_Filter_128(rawBuffer[rawBufferIndex], finalBuffer, 1, &filter);
+        } else {
+            Open_PDM_Filter_64(rawBuffer[rawBufferIndex], finalBuffer, 1, &filter);
+        }
+
+        if (_cutSamples) {
+            memset(finalBuffer, 0, _cutSamples);
+            _cutSamples = 0;
+        }
+
+        // swap final buffer and raw buffers' indexes
+        finalBuffer = (int16_t*)_doubleBuffer.data();
+        _doubleBuffer.swap(filter.nSamples * sizeof(int16_t));
+        rawBufferIndex = shadowIndex;
    }

-    // fill final buffer with PCM samples
-    Open_PDM_Filter_64(rawBuffer[rawBufferIndex], finalBuffer, 1, &filter);
-
-    if (cutSamples) {
-        memset(finalBuffer, 0, cutSamples);
-        cutSamples = 0;
-    }
-
-    // swap final buffer and raw buffers' indexes
-    finalBuffer = (int16_t*)_doubleBuffer.data();
-    _doubleBuffer.swap(filter.nSamples * sizeof(int16_t));
-    rawBufferIndex = shadowIndex;
-
    if (_onReceive) {
        _onReceive();
    }
@@ -162,9 +162,23 @@ public:

 private:
    const char *getMode(uint8_t mode) {
-        bool read = (mode & O_READ) ? true : false;
-        bool write = (mode & O_WRITE) ? true : false;
-        bool append = (mode & O_APPEND) ? true : false;
+        bool read = false;
+        bool write = false;
+
+        switch (mode & O_ACCMODE) {
+        case O_RDONLY:
+            read = true;
+            break;
+        case O_WRONLY:
+            write = true;
+            break;
+        case O_RDWR:
+            read = true;
+            write = true;
+            break;
+        }
+        const bool append = (mode & O_APPEND) > 0;
+
        if (read & !write)           {
            return "r";
        } else if (!read &  write & !append) {
@@ -125,7 +125,7 @@ uint16_t SPIClassRP2040::transfer16(uint16_t data) {
    spi_set_format(_spi, 16, cpol(), cpha(), SPI_MSB_FIRST);
    DEBUGSPI("SPI::transfer16(%04x), cpol=%d, cpha=%d\n", data, cpol(), cpha());
    spi_write16_read16_blocking(_spi, &data, &ret, 1);
-    ret = (_spis.getBitOrder() == MSBFIRST) ? ret : reverseByte(ret);
+    ret = (_spis.getBitOrder() == MSBFIRST) ? ret : reverse16Bit(ret);
    DEBUGSPI("SPI: read back %02x\n", ret);
    return ret;
 }
@@ -0,0 +1,4 @@
+// Since things may just work, we'll redirect for now
+#include "WebServer.h"
+
+using ESP8266WebServer = WebServer;
@@ -0,0 +1,4 @@
+// Since things may just work, we'll redirect for now
+#include "WiFiMulti.h"
+
+using ESP8266WiFiMulti = WiFiMulti;
@@ -86,6 +86,9 @@ public:
    int begin(const char* ssid, const char *passphrase);

    bool connected();
+    bool isConnected() {
+        return connected();
+    }
    int8_t waitForConnectResult(unsigned long timeoutLength = 60000) {
        uint32_t now = millis();
        while (millis() - now < timeoutLength) {
@@ -381,6 +384,15 @@ public:
    void setFeedWatchdogFunc(FeedHostProcessorWatchdogFuncPointer func);
    void feedWatchdog();

+    // ESP8266 compatibility
+    void persistent(bool unused) {
+        (void) unused;
+    }
+
+    void hostname(const char *name) {
+        setHostname(name);
+    }
+
 private:
    int _timeout = 15000;
    String _ssid;
@@ -1,6 +1,6 @@
 {
  "name": "framework-arduinopico",
-  "version": "1.20701.0",
+  "version": "1.20702.0",
  "description": "Arduino Wiring-based Framework (RPi Pico RP2040)",
  "keywords": [
    "framework",
@@ -20,7 +20,7 @@
 # https://github.com/arduino/Arduino/wiki/Arduino-IDE-1.5---3rd-party-Hardware-specification

 name=Raspberry Pi RP2040 Boards
-version=2.7.1
+version=2.7.2

 runtime.tools.pqt-gcc.path={runtime.platform.path}/system/arm-none-eabi
 runtime.tools.pqt-python3.path={runtime.platform.path}/system/python3
@@ -43,7 +43,7 @@ compiler.warning_flags.more=-Wall -Werror=return-type -Wno-ignored-qualifiers
 compiler.warning_flags.all=-Wall -Wextra -Werror=return-type -Wno-ignored-qualifiers

 compiler.netdefines=-DPICO_CYW43_ARCH_THREADSAFE_BACKGROUND=1 -DCYW43_LWIP=0 {build.lwipdefs} -DLWIP_IGMP=1 -DLWIP_CHECKSUM_CTRL_PER_NETIF=1
-compiler.defines={build.led} {build.usbstack_flags} -DCFG_TUSB_MCU=OPT_MCU_RP2040 -DUSB_VID={build.vid} -DUSB_PID={build.pid} '-DUSB_MANUFACTURER={build.usb_manufacturer}' '-DUSB_PRODUCT={build.usb_product}' {compiler.netdefines} -DARDUINO_VARIANT="{build.variant}" -DTARGET_RP2040
+compiler.defines={build.led} {build.usbstack_flags} -DCFG_TUSB_MCU=OPT_MCU_RP2040 {build.usbpid} {build.usbvid} {build.usbpwr} '-DUSB_MANUFACTURER={build.usb_manufacturer}' '-DUSB_PRODUCT={build.usb_product}' {compiler.netdefines} -DARDUINO_VARIANT="{build.variant}" -DTARGET_RP2040
 compiler.includes="-iprefix{runtime.platform.path}/" "@{runtime.platform.path}/lib/platform_inc.txt" "-I{runtime.platform.path}/include"
 compiler.flags=-march=armv6-m -mcpu=cortex-m0plus -mthumb -ffunction-sections -fdata-sections {build.flags.exceptions} {build.flags.stackprotect} {build.flags.cmsis} {build.picodebugflags}
 compiler.wrap="@{runtime.platform.path}/lib/platform_wrap.txt"
@@ -114,13 +114,13 @@ pluggable_discovery.rp2040.pattern="{runtime.platform.path}/system/python3/pytho
 recipe.hooks.sketch.prebuild.pattern="{runtime.tools.pqt-python3.path}/python3" -I "{runtime.platform.path}/tools/signing.py" --mode header --publickey "{build.source.path}/public.key" --out "{build.path}/core/Updater_Signing.h"

 ## Compile c files
-recipe.c.o.pattern="{compiler.path}{compiler.c.cmd}" {compiler.c.flags} {build.usbpid} {build.usbpwr} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DBOARD_NAME="{build.board}" -DARDUINO_ARCH_{build.arch} {compiler.c.extra_flags} {build.extra_flags} {build.debug_port} {build.debug_level} {build.flags.optimize} {includes} "{source_file}" -o "{object_file}"
+recipe.c.o.pattern="{compiler.path}{compiler.c.cmd}" {compiler.c.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DBOARD_NAME="{build.board}" -DARDUINO_ARCH_{build.arch} {compiler.c.extra_flags} {build.extra_flags} {build.debug_port} {build.debug_level} {build.flags.optimize} {includes} "{source_file}" -o "{object_file}"

 ## Compile c++ files
-recipe.cpp.o.pattern="{compiler.path}{compiler.cpp.cmd}" -I "{build.path}/core" {compiler.cpp.flags} {build.usbpid} {build.usbpwr} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DBOARD_NAME="{build.board}" -DARDUINO_ARCH_{build.arch} {compiler.cpp.extra_flags} {build.extra_flags} {build.debug_port} {build.debug_level} {build.flags.optimize} {build.wificc} {includes} "{source_file}" -o "{object_file}"
+recipe.cpp.o.pattern="{compiler.path}{compiler.cpp.cmd}" -I "{build.path}/core" {compiler.cpp.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DBOARD_NAME="{build.board}" -DARDUINO_ARCH_{build.arch} {compiler.cpp.extra_flags} {build.extra_flags} {build.debug_port} {build.debug_level} {build.flags.optimize} {build.wificc} {includes} "{source_file}" -o "{object_file}"

 ## Compile S files
-recipe.S.o.pattern="{compiler.path}{compiler.S.cmd}" {compiler.S.flags} {build.usbpid} {build.usbpwr} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DBOARD_NAME="{build.board}" -DARDUINO_ARCH_{build.arch} {compiler.S.extra_flags} {build.extra_flags} {build.debug_port} {build.debug_level} {includes} "{source_file}" -o "{object_file}"
+recipe.S.o.pattern="{compiler.path}{compiler.S.cmd}" {compiler.S.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DBOARD_NAME="{build.board}" -DARDUINO_ARCH_{build.arch} {compiler.S.extra_flags} {build.extra_flags} {build.debug_port} {build.debug_level} {includes} "{source_file}" -o "{object_file}"

 ## Create archives
 # archive_file_path is needed for backwards compatibility with IDE 1.6.5 or older, IDE 1.6.6 or newer overrides this value
@@ -2,7 +2,7 @@
  "build": {
    "arduino": {
      "earlephilhower": {
-        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
+        "boot2_source": "boot2_w25q128jvxq_4_padded_checksum.S",
        "usb_vid": "0x1209",
        "usb_pid": "0xCB74"
      }
@@ -0,0 +1,54 @@
+{
+  "build": {
+    "arduino": {
+      "earlephilhower": {
+        "boot2_source": "boot2_generic_03h_4_padded_checksum.S",
+        "usb_vid": "0x2E8A",
+        "usb_pid": "0x800A"
+      }
+    },
+    "core": "earlephilhower",
+    "cpu": "cortex-m0plus",
+    "extra_flags": "-D ARDUINO_YD_RP2040 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=500",
+    "f_cpu": "133000000L",
+    "hwids": [
+      [
+        "0x2E8A",
+        "0x00C0"
+      ],
+      [
+        "0x2E8A",
+        "0x800A"
+      ]
+    ],
+    "mcu": "rp2040",
+    "variant": "vccgnd_yd_rp2040"
+  },
+  "debug": {
+    "jlink_device": "RP2040_M0_0",
+    "openocd_target": "rp2040.cfg",
+    "svd_path": "rp2040.svd"
+  },
+  "frameworks": [
+    "arduino"
+  ],
+  "name": "YD RP2040",
+  "upload": {
+    "maximum_ram_size": 270336,
+    "maximum_size": 16777216,
+    "require_upload_port": true,
+    "native_usb": true,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": false,
+    "protocol": "picotool",
+    "protocols": [
+      "cmsis-dap",
+      "jlink",
+      "raspberrypi-swd",
+      "picotool",
+      "picoprobe"
+    ]
+  },
+  "url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
+  "vendor": "VCC-GND"
+}
@@ -70,7 +70,8 @@ def BuildBoot(name):
            ("IS25LP080 QSPI /2", "boot2_is25lp080_2_padded_checksum"), ("IS25LP080 QSPI /4", "boot2_is25lp080_4_padded_checksum"),
            ("W25Q080 QSPI /2", "boot2_w25q080_2_padded_checksum"), ("W25Q080 QSPI /4", "boot2_w25q080_4_padded_checksum"),
            ("W25X10CL QSPI /2", "boot2_w25x10cl_2_padded_checksum"), ("W25X10CL QSPI /4", "boot2_w25x10cl_4_padded_checksum"),
-            ("W25Q64JV QSPI /4", "boot2_w25q64jv_4_padded_checksum"), ("W25Q16JVxQ QSPI /4", "boot2_w25q16jvxq_4_padded_checksum") ]:
+            ("W25Q64JV QSPI /4", "boot2_w25q64jv_4_padded_checksum"), ("W25Q16JVxQ QSPI /4", "boot2_w25q16jvxq_4_padded_checksum"),
+            ("W25Q128JV QSPI /4", "boot2_w25q128jvxq_4_padded_checksum")]:
        print("%s.menu.boot2.%s=%s" % (name, l[1], l[0]))
        print("%s.menu.boot2.%s.build.boot2=%s" % (name, l[1], l[1]))

@@ -141,10 +142,11 @@ def BuildHeader(name, vendor_name, product_name, vid, pid, pwr, boarddefine, var
                    print("%s.vid.%d=%s" % (name, usb, vid))
                    print("%s.pid.%d=0x%04x" % (name, usb, thispid))
                    usb = usb + 1
+    print("%s.build.usbvid=-DUSBD_VID=%s" % (name, vid))
    if type(pid) == list:
-        print("%s.build.usbpid=-DSERIALUSB_PID=%s" % (name, pid[0]))
+        print("%s.build.usbpid=-DUSBD_PID=%s" % (name, pid[0]))
    else:
-        print("%s.build.usbpid=-DSERIALUSB_PID=%s" % (name, pid))
+        print("%s.build.usbpid=-DUSBD_PID=%s" % (name, pid))
    print("%s.build.usbpwr=-DUSBD_MAX_POWER_MA=%s" % (name, pwr))
    print("%s.build.board=%s" % (name, boarddefine))
    print("%s.build.mcu=cortex-m0plus" % (name))
@@ -159,11 +161,6 @@ def BuildHeader(name, vendor_name, product_name, vid, pid, pwr, boarddefine, var
    print("%s.build.core=rp2040" % (name))
    print("%s.build.ldscript=memmap_default.ld" % (name))
    print("%s.build.boot2=%s" % (name, boot2))
-    print("%s.build.vid=%s" % (name, vid))
-    if type(pid) == list:
-        print("%s.build.pid=%s" % (name, pid[0]))
-    else:
-        print("%s.build.pid=%s" % (name, pid))
    print('%s.build.usb_manufacturer="%s"' % (name, vendor_name))
    print('%s.build.usb_product="%s"' % (name, product_name))
    if extra != None:
@@ -320,7 +317,7 @@ MakeBoard("rpipico", "Raspberry Pi", "Pico", "0x2e8a", "0x000a", 250, "RASPBERRY
 MakeBoard("rpipicow", "Raspberry Pi", "Pico W", "0x2e8a", "0xf00a", 250, "RASPBERRY_PI_PICO_W", 2, "boot2_w25q080_2_padded_checksum")

 # 0xCB
-MakeBoard("0xcb_helios", "0xCB", "Helios", "0x1209", "0xCB74", 500, "0XCB_HELIOS", 16, "boot2_w25q080_2_padded_checksum")
+MakeBoard("0xcb_helios", "0xCB", "Helios", "0x1209", "0xCB74", 500, "0XCB_HELIOS", 16, "boot2_w25q128jvxq_4_padded_checksum")

 # Adafruit
 MakeBoard("adafruit_feather", "Adafruit", "Feather RP2040", "0x239a", "0x80f1", 250, "ADAFRUIT_FEATHER_RP2040", 8, "boot2_w25x10cl_4_padded_checksum")
@@ -225,6 +225,23 @@ def convert_from_hex_to_uf2(buf):
 def to_str(b):
    return b.decode("utf-8", "replace")

+def possibly_add(p, q):
+    if p not in q:
+        if os.path.isdir(p):
+            if os.access(p, os.W_OK):
+                q.append(p)
+
+def possibly_anydir(p, q):
+    if os.path.isdir(p):
+        if os.access(p, os.R_OK):
+            r = glob.glob(p + "/*")
+            for t in r:
+                possibly_add(t, q)
+
+def possibly_any(p, q, r):
+    possibly_anydir(p, q)
+    possibly_anydir(p + r, q)
+
 def get_drives():
    drives = []
    if sys.platform == "win32":
@@ -248,21 +265,9 @@ def get_drives():
            if len(words) >= 3 and words[1] == "2" and words[2] == "FAT":
                drives.append(words[0])
    else:
-        rootpath = "/run/media"
-        if not os.path.isdir(rootpath):
-            rootpath = "/media"
-        if not os.path.isdir(rootpath):
-            rootpath = "/opt/media"
        if sys.platform == "darwin":
-            rootpath = "/Volumes"
+            possibly_anydir("/Volumes", drives)
        elif sys.platform == "linux":
-            tmp = rootpath + "/" + os.environ["USER"]
-            if os.path.isdir(tmp):
-                rootpath = tmp
-        for d in os.listdir(rootpath):
-            drives.append(os.path.join(rootpath, d))
-
-        if (len(drives) == 0) and (sys.platform == "linux"):
            globexpr = "/dev/disk/by-id/usb-RPI_RP2*-part1"
            rpidisk = glob.glob(globexpr)
            if len(rpidisk) > 0:
@@ -277,6 +282,19 @@ def get_drives():
                except Exception as ex:
                    print("Exception executing udisksctl. Exception: {}".format(ex))
                    # If it fails, no problem since it was a heroic attempt
+            '''
+            Generate a list and scan those too.
+            First add the usual suspects.
+            Then Scan a returned list.
+            '''
+            u="/" + os.environ["USER"]
+            possibly_anydir("/mnt", drives)
+            possibly_any("/media", drives, u)
+            possibly_any("/opt/media", drives, u)
+            possibly_any("/run/media", drives, u)
+            possibly_any("/var/run/media", drives, u)
+            # Add from udisksctl info?
+            # Add from /proc/mounts?

    def has_info(d):
        try:
@@ -347,8 +365,15 @@ def main():
            try:
                print("Resetting " + str(args.serial))
                try:
-                    ser = serial.Serial(args.serial, 1200)
+                    ser = serial.Serial()
+                    ser.port = args.serial
+                    ser.open()
+                    ser.baudrate = 9600
+                    ser.dtr = True
+                    time.sleep(0.1)
                    ser.dtr = False
+                    ser.baudrate = 1200
+                    ser.close()
                except:
                    pass # Ignore error in the case it is already in upload mode
            except:
@@ -384,7 +409,7 @@ def main():
            now = time.time()
            drives = []
            while (time.time() - now < 10.0) and (len(drives) == 0):
-                time.sleep(0.5) # Avoid 100% CPU use while waiting for drive to appear
+                time.sleep(1.0) # Avoid 100% CPU use while waiting for drive to appear
                drives = get_drives()

        if args.output:
@@ -396,6 +421,17 @@ def main():
            print("Flashing %s (%s)" % (d, board_id(d)))
            write_file(d + "/NEW.UF2", outbuf)

+        # Wait until serial port (if defined) re-appears, or 2s timeout unless UF2 drive direct upload
+        try:
+            if args.serial != "UF2 Board":
+                timeout = time.time() + 2.0
+                while time.time() < timeout:
+                    if os.access(args.serial, os.W_OK):
+                        break
+                    time.sleep(0.2)
+        except:
+            pass
+

 if __name__ == "__main__":
    main()
@@ -0,0 +1,41 @@
+#pragma once
+
+// Pin definitions taken from:
+//    https://user-images.githubusercontent.com/57373245/211920388-d339f085-840d-433d-a575-590ace58219c.png
+
+
+// LEDs
+#define PIN_NEOPIXEL   (23u)
+#define PIN_USRKEY     (24u)
+#define PIN_LED        (25u)
+
+// Serial
+#define PIN_SERIAL1_TX (0u)
+#define PIN_SERIAL1_RX (1u)
+
+#define PIN_SERIAL2_TX (8u)
+#define PIN_SERIAL2_RX (9u)
+
+// SPI
+#define PIN_SPI0_MISO  (16u)
+#define PIN_SPI0_MOSI  (19u)
+#define PIN_SPI0_SCK   (18u)
+#define PIN_SPI0_SS    (17u)
+
+#define PIN_SPI1_MISO  (12u)
+#define PIN_SPI1_MOSI  (15u)
+#define PIN_SPI1_SCK   (14u)
+#define PIN_SPI1_SS    (13u)
+
+// Wire
+#define PIN_WIRE0_SDA  (4u)
+#define PIN_WIRE0_SCL  (5u)
+
+#define PIN_WIRE1_SDA  (26u)
+#define PIN_WIRE1_SCL  (27u)
+
+#define SERIAL_HOWMANY (3u)
+#define SPI_HOWMANY    (2u)
+#define WIRE_HOWMANY   (2u)
+
+#include "../generic/common.h"
Author	SHA1	Message	Date
Earle F. Philhower, III	1bfd07c19a	Update version	2023-02-11 12:34:40 -08:00
Andrew KrollandEarle F. Philhower, III	5dafbf57e9	Optimize and improve upload experience (#1136 ) Stop the IDE from reporting large "Serial port not fount"-type errors after every upload by delaying a bit before the uploader exits to give the OS/Pico time to renegotiate. Fixes flashing problems on certain Linux distros by checking all possible mount locations instead of only the first one to be found. Make 1200bps reset tickle more robust Co-authored-by: Earle F. Philhower, III <earlephilhower@yahoo.com>	2023-02-11 12:33:44 -08:00
Earle F. Philhower, III	09db2e6c37	Apply SD.h fix from ESP8266 (#1171 ) Pull in the portion of the change correcting the flag setting from https://github.com/esp8266/Arduino/pull/8833	2023-02-11 11:57:27 -08:00
Earle F. Philhower, III	b6cb2e7edc	Avoid race condition in I2S/PWMAudio delete (#1163 ) Fixes #1162 Disable DMA interrupts while we're tearing down an AudioBufferManager and explicitly clear any potential leftover IRQs to avoid hangs.	2023-02-09 13:29:45 -08:00
Earle F. Philhower, III	bedcbf57c6	Add ESP8266/32 WiFi.isConnected wrapper (#1166 ) Fixes #1165	2023-02-09 08:39:35 -08:00
TomKong666	7df080ee92	PDM library re-port (#1160 ) See #1156	2023-02-07 08:10:24 -08:00
Earle F. Philhower, III	b400897ca2	Avoid initial glitch on Serial1/2 when RX high (#1154 ) Fixes #1153 Set up the GPIO redirects before the UART is pulled from reset to avoid a possible bad byte at `Serial1/2.begin()`.	2023-02-01 19:15:58 -08:00
uPesy Electronics	7573500e59	Add uPesy Tutorials using Arduino Pico port. (#1151 )	2023-02-01 06:52:25 -08:00
Vishnu Mohanan	8a1e03739a	Fix SPI transfer16 return value (#1148 ) The SPI transfer16() function returned wrongly oriented bytes. Replaced reverseByte() with reverse16Bit(). Fixes #1146	2023-01-31 08:09:53 -08:00
Earle F. Philhower, III	a1af9698ac	Fix USB VID/PID setting, rationalize boards.txt (#1144 ) The USB VID was always being set to the Raspberry Pi foundation code, causing other brand boards to show up incorrectly. Remove redundant values from the boards.txt and define a consistent USB VID/PID and use it in the setup code. See #1129 for more info	2023-01-28 11:10:39 -08:00
Earle F. Philhower, III	af01c3cc77	Add boot2_w25q128jv to generic Pico flash menu (#1142 ) Add-on to #1126	2023-01-26 16:35:16 -08:00
Earle F. Philhower, III	4c8bdc2bfc	Print useful uf2conv error if executable not found (#1141 ) Fixes #1140 ```` Converting to uf2, output size: 134144, start address: 0x2000 ERROR: Unable to execute powershell or wmic commands, can't continue. ERROR: Please make sure either PowerShell or WMIC is installed and in your %PATH%. ````	2023-01-26 11:02:07 -08:00
Conor Burns	c58f94a9ba	Add correct boot source to helios (#1126 )	2023-01-25 14:45:51 -08:00
Earle F. Philhower, III	ecaa2bd778	Fix SerialUART::overflow reporting race condition (#1133 ) Fixes #1132	2023-01-21 01:38:15 -08:00
Earle F. Philhower, III	d619bf0bc1	More minor ESP8266 compatibility tweaks (#1131 )	2023-01-20 17:06:40 -08:00
Gavin Hurlbut	9a241b0e43	Add Serial UART break reporting (#1130 ) Added SerialUART::getBreakReceived()	2023-01-20 16:54:31 -08:00
Earle F. Philhower, III	e3f2f87e2d	Add more ESP8266 WiFi compatibility wrappers (#1128 )	2023-01-19 12:44:05 -08:00
Earle F. Philhower, III	a8238cb0d4	Add the YD-RP2040 support files Oops!	2023-01-19 07:57:26 -08:00