Update version

Use the PWM hardware to generate a signal suitable for filtering and
amplifying 16bps audio output.

Refactor the AudioBufferManager to allow sharing with I2S

Add example

README.md

@@ -13,6 +13,7 @@ See https://arduino-pico.readthedocs.io/en/latest/ along with the examples for m
 * Raspberry Pi Pico
 * Raspberry Pi Pico W
 * Adafruit Feather RP2040
+* Adafruit Feather RP2040 SCORPIO
 * Adafruit ItsyBitsy RP2040
 * Adafruit KB2040
 * Adafruit Macropad RP2040
@@ -23,7 +24,7 @@ See https://arduino-pico.readthedocs.io/en/latest/ along with the examples for m
 * BridgeTek IDM2040-7A
 * Cytron Maker Pi RP2040
 * Cytron Maker Nano RP2040
-* Degz Mizu
+* DatanoiseTV PicoADK+
 * DeRuiLab FlyBoard2040 Core
 * DFRobot Beetle RP2040
 * ElectronicCats Hunter Cat NFC
@@ -38,12 +39,19 @@ See https://arduino-pico.readthedocs.io/en/latest/ along with the examples for m
 * Invector Labs RPICO32
 * Melopero Cookie RP2040
 * Melopero Shake RP2040
+* nullbits Bit-C PRO
 * Pimoroni PGA2040
 * Seeed XIAO RP2040
 * Solder Party RP2040 Stamp
 * SparkFun ProMicro RP2040
 * SparkFun Thing Plus RP2040
 * uPesy RP2040 DevKit
+* Viyalab Mizu RP2040
+* Waveshare RP2040 Zero
+* Waveshare RP2040 One
+* Waveshare RP2040 Plus
+* Waveshare RP2040 LCD 0.96
+* Waveshare RP2040 LCD 1.28
 * WIZnet W5100S-EVB-Pico
 * WIZnet W5500-EVB-Pico
 * WIZnet WizFi360-EVB-Pico

boot2/boot2_w25q16jvxq_4_padded_checksum.S

@@ -0,0 +1,23 @@
+// Padded and checksummed version of: generated\Winbond\W25Q16JVxQ\boot2.bin
+
+.cpu cortex-m0plus
+.thumb
+
+.section .boot2, "ax"
+
+.byte 0xf7, 0xb5, 0x73, 0x46, 0x21, 0x22, 0x02, 0x26, 0x01, 0x93, 0x29, 0x4b, 0xc0, 0x24, 0x5a, 0x60
+.byte 0x9a, 0x68, 0x00, 0x27, 0xb2, 0x43, 0xda, 0x60, 0x9a, 0x60, 0x1a, 0x61, 0x5a, 0x61, 0x04, 0x23
+.byte 0x01, 0x25, 0x64, 0x05, 0xa7, 0x60, 0x63, 0x61, 0x22, 0x4b, 0x30, 0x00, 0x1d, 0x60, 0xe0, 0x23
+.byte 0xdb, 0x02, 0x23, 0x60, 0x35, 0x23, 0xa5, 0x60, 0x23, 0x66, 0x23, 0x66, 0x00, 0xf0, 0x4a, 0xf8
+.byte 0xc0, 0xb2, 0xb0, 0x42, 0x12, 0xd0, 0x06, 0x23, 0x28, 0x00, 0x23, 0x66, 0x00, 0xf0, 0x42, 0xf8
+.byte 0x25, 0x66, 0x03, 0x20, 0x27, 0x66, 0x26, 0x66, 0x00, 0xf0, 0x3c, 0xf8, 0x03, 0x36, 0x26, 0x66
+.byte 0x02, 0x20, 0x26, 0x66, 0x00, 0xf0, 0x36, 0xf8, 0x28, 0x42, 0xf8, 0xd1, 0x00, 0x25, 0x12, 0x4b
+.byte 0xa5, 0x60, 0x12, 0x4f, 0x23, 0x60, 0x12, 0x4b, 0x65, 0x60, 0x01, 0x26, 0x3b, 0x60, 0xeb, 0x23
+.byte 0xa6, 0x60, 0x23, 0x66, 0x4b, 0x3b, 0x23, 0x66, 0x02, 0x20, 0x00, 0xf0, 0x23, 0xf8, 0x0d, 0x4b
+.byte 0xa5, 0x60, 0x3b, 0x60, 0xa6, 0x60, 0x01, 0x9b, 0xab, 0x42, 0x08, 0xd1, 0x0a, 0x4b, 0x0b, 0x4a
+.byte 0x13, 0x60, 0x1b, 0x68, 0x83, 0xf3, 0x08, 0x88, 0x09, 0x4b, 0x1b, 0x68, 0x18, 0x47, 0xf7, 0xbd
+.byte 0x00, 0x00, 0x02, 0x40, 0xf0, 0x00, 0x00, 0x18, 0x00, 0x03, 0x5f, 0x00, 0xf4, 0x00, 0x00, 0x18
+.byte 0x21, 0x22, 0x00, 0x00, 0x22, 0x20, 0x00, 0xa0, 0x00, 0x01, 0x00, 0x10, 0x08, 0xed, 0x00, 0xe0
+.byte 0x04, 0x01, 0x00, 0x10, 0xc0, 0x22, 0x03, 0x00, 0x04, 0x21, 0x52, 0x05, 0x90, 0x6a, 0x08, 0x42
+.byte 0xfc, 0xd0, 0x01, 0x21, 0x90, 0x6a, 0x08, 0x42, 0xfc, 0xd1, 0x01, 0x3b, 0xdb, 0xb2, 0x10, 0x6e
+.byte 0x00, 0x2b, 0xfa, 0xd1, 0x70, 0x47, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xaa, 0xa0, 0xf0, 0x2f

cores/rp2040/Arduino.h

@@ -68,10 +68,12 @@ void noInterrupts();
 #define portOutputRegister(port)    ((volatile uint32_t*) sio_hw->gpio_out)
 #define portInputRegister(port)     ((volatile uint32_t*) sio_hw->gpio_in)
 #define portModeRegister(port)      ((volatile uint32_t*) sio_hw->gpio_oe)
+#define digitalWriteFast(pin, val)  (val ? sio_hw->gpio_set = (1 << pin) : sio_hw->gpio_clr = (1 << pin))
+#define digitalReadFast(pin)        ((1 << pin) & sio_hw->gpio_in)
 
 // ADC RP2040-specific calls
 void analogReadResolution(int bits);
-float analogReadTemp();  // Returns core temp in Centigrade
+float analogReadTemp(float vref = 3.3);  // Returns core temp in Centigrade
 
 // PWM RP2040-specific calls
 void analogWriteFreq(uint32_t freq);

cores/rp2040/CoreMutex.cpp

@@ -24,17 +24,22 @@
 #include "Arduino.h"
 #include "CoreMutex.h"
 
-CoreMutex::CoreMutex(mutex_t *mutex, bool debugEnable) {
+CoreMutex::CoreMutex(mutex_t *mutex, uint8_t option) {
     _mutex = mutex;
     _acquired = false;
+    _option = option;
     if (__isFreeRTOS) {
         auto m = __get_freertos_mutex_for_ptr(mutex);
-        __freertos_mutex_take(m);
+        if (_option & FromISR) {
+            __freertos_mutex_take_from_isr(m);
+        } else {
+            __freertos_mutex_take(m);
+        }
     } else {
         uint32_t owner;
         if (!mutex_try_enter(_mutex, &owner)) {
             if (owner == get_core_num()) { // Deadlock!
-                if (debugEnable) {
+                if (_option & DebugEnable) {
                     DEBUGCORE("CoreMutex - Deadlock detected!\n");
                 }
                 return;
@@ -49,7 +54,11 @@ CoreMutex::~CoreMutex() {
     if (_acquired) {
         if (__isFreeRTOS) {
             auto m = __get_freertos_mutex_for_ptr(_mutex);
-            __freertos_mutex_give(m);
+            if (_option & FromISR) {
+                __freertos_mutex_give_from_isr(m);
+            } else {
+                __freertos_mutex_give(m);
+            }
         } else {
             mutex_exit(_mutex);
         }

cores/rp2040/CoreMutex.h

@@ -26,9 +26,14 @@
 #include "pico/mutex.h"
 #include "_freertos.h"
 
+enum {
+    DebugEnable = 1,
+    FromISR = 1 << 1,
+};
+
 class CoreMutex {
 public:
-    CoreMutex(mutex_t *mutex, bool debugEnable = true);
+    CoreMutex(mutex_t *mutex, uint8_t option = DebugEnable);
     ~CoreMutex();
 
     operator bool() {
@@ -38,4 +43,5 @@ public:
 private:
     mutex_t *_mutex;
     bool _acquired;
+    u_int8_t _option;
 };

cores/rp2040/FS.cpp

@@ -192,13 +192,12 @@ File File::openNextFile() {
 String File::readString() {
     String ret;
     ret.reserve(size() - position());
-    char temp[256 + 1];
-    int countRead = readBytes(temp, sizeof(temp) - 1);
-    while (countRead > 0) {
-        temp[countRead] = 0;
-        ret += temp;
-        countRead = readBytes(temp, sizeof(temp) - 1);
-    }
+    uint8_t temp[256];
+    int countRead;
+    do {
+        countRead = read(temp, sizeof(temp));
+        ret.concat(temp, countRead);
+    } while (countRead > 0);
     return ret;
 }
 

cores/rp2040/RP2040USB.cpp

@@ -68,9 +68,11 @@ static int __usb_task_irq;
 #define USBD_STR_SERIAL (0x03)
 #define USBD_STR_CDC (0x04)
 
-
 #define EPNUM_HID   0x83
 
+#define USBD_MSC_EPOUT 0x03
+#define USBD_MSC_EPIN 0x84
+#define USBD_MSC_EPSIZE 64
 
 const uint8_t *tud_descriptor_device_cb(void) {
     static tusb_desc_device_t usbd_desc_device = {
@@ -89,7 +91,7 @@ const uint8_t *tud_descriptor_device_cb(void) {
         .iSerialNumber = USBD_STR_SERIAL,
         .bNumConfigurations = 1
     };
-    if (__USBInstallSerial && !__USBInstallKeyboard && !__USBInstallMouse && !__USBInstallJoystick) {
+    if (__USBInstallSerial && !__USBInstallKeyboard && !__USBInstallMouse && !__USBInstallJoystick && !__USBInstallMassStorage) {
         // Can use as-is, this is the default USB case
         return (const uint8_t *)&usbd_desc_device;
     }
@@ -103,6 +105,9 @@ const uint8_t *tud_descriptor_device_cb(void) {
     if (__USBInstallJoystick) {
         usbd_desc_device.idProduct |= 0x0100;
     }
+    if (__USBInstallMassStorage) {
+        usbd_desc_device.idProduct ^= 0x2000;
+    }
     // Set the device class to 0 to indicate multiple device classes
     usbd_desc_device.bDeviceClass = 0;
     usbd_desc_device.bDeviceSubClass = 0;
@@ -223,7 +228,7 @@ void __SetupUSBDescriptor() {
     if (!usbd_desc_cfg) {
         bool hasHID = __USBInstallKeyboard || __USBInstallMouse || __USBInstallJoystick;
 
-        uint8_t interface_count = (__USBInstallSerial ? 2 : 0) + (hasHID ? 1 : 0);
+        uint8_t interface_count = (__USBInstallSerial ? 2 : 0) + (hasHID ? 1 : 0) + (__USBInstallMassStorage ? 1 : 0);
 
         uint8_t cdc_desc[TUD_CDC_DESC_LEN] = {
             // Interface number, string index, protocol, report descriptor len, EP In & Out address, size & polling interval
@@ -238,7 +243,12 @@ void __SetupUSBDescriptor() {
             TUD_HID_DESCRIPTOR(hid_itf, 0, HID_ITF_PROTOCOL_NONE, hid_report_len, EPNUM_HID, CFG_TUD_HID_EP_BUFSIZE, 10)
         };
 
-        int usbd_desc_len = TUD_CONFIG_DESC_LEN + (__USBInstallSerial ? sizeof(cdc_desc) : 0) + (hasHID ? sizeof(hid_desc) : 0);
+        uint8_t msd_itf = interface_count - 1;
+        uint8_t msd_desc[TUD_MSC_DESC_LEN] = {
+            TUD_MSC_DESCRIPTOR(msd_itf, 0, USBD_MSC_EPOUT, USBD_MSC_EPIN, USBD_MSC_EPSIZE)
+        };
+
+        int usbd_desc_len = TUD_CONFIG_DESC_LEN + (__USBInstallSerial ? sizeof(cdc_desc) : 0) + (hasHID ? sizeof(hid_desc) : 0) + (__USBInstallMassStorage ? sizeof(msd_desc) : 0);
 
         uint8_t tud_cfg_desc[TUD_CONFIG_DESC_LEN] = {
             // Config number, interface count, string index, total length, attribute, power in mA
@@ -260,6 +270,10 @@ void __SetupUSBDescriptor() {
                 memcpy(ptr, hid_desc, sizeof(hid_desc));
                 ptr += sizeof(hid_desc);
             }
+            if (__USBInstallMassStorage) {
+                memcpy(ptr, msd_desc, sizeof(msd_desc));
+                ptr += sizeof(msd_desc);
+            }
         }
     }
 }
@@ -367,4 +381,55 @@ extern "C" void tud_hid_set_report_cb(uint8_t instance, uint8_t report_id, hid_r
     (void) bufsize;
 }
 
+extern "C" int32_t tud_msc_read10_cb(uint8_t lun, uint32_t lba, uint32_t offset, void* buffer, uint32_t bufsize) __attribute__((weak));
+extern "C" int32_t tud_msc_read10_cb(uint8_t lun, uint32_t lba, uint32_t offset, void* buffer, uint32_t bufsize) {
+    (void) lun;
+    (void) lba;
+    (void) offset;
+    (void) buffer;
+    (void) bufsize;
+    return -1;
+}
+
+extern "C" bool tud_msc_test_unit_ready_cb(uint8_t lun) __attribute__((weak));
+extern "C" bool tud_msc_test_unit_ready_cb(uint8_t lun) {
+    (void) lun;
+    return false;
+}
+
+extern "C" int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t* buffer, uint32_t bufsize) __attribute__((weak));
+extern "C" int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t* buffer, uint32_t bufsize) {
+    (void) lun;
+    (void) lba;
+    (void) offset;
+    (void) buffer;
+    (void) bufsize;
+    return -1;
+}
+
+extern "C" int32_t tud_msc_scsi_cb(uint8_t lun, uint8_t const scsi_cmd[16], void* buffer, uint16_t bufsize) __attribute__((weak));
+extern "C" int32_t tud_msc_scsi_cb(uint8_t lun, uint8_t const scsi_cmd[16], void* buffer, uint16_t bufsize) {
+    (void) lun;
+    (void) scsi_cmd;
+    (void) buffer;
+    (void) bufsize;
+    return 0;
+}
+
+extern "C" void tud_msc_capacity_cb(uint8_t lun, uint32_t* block_count, uint16_t* block_size) __attribute__((weak));
+extern "C" void tud_msc_capacity_cb(uint8_t lun, uint32_t* block_count, uint16_t* block_size) {
+    (void) lun;
+    *block_count = 0;
+    *block_size = 0;
+}
+
+extern "C" void tud_msc_inquiry_cb(uint8_t lun, uint8_t vendor_id[8], uint8_t product_id[16], uint8_t product_rev[4]) __attribute__((weak));
+extern "C" void tud_msc_inquiry_cb(uint8_t lun, uint8_t vendor_id[8], uint8_t product_id[16], uint8_t product_rev[4]) {
+    (void) lun;
+    vendor_id[0] = 0;
+    product_id[0] = 0;
+    product_rev[0] = 0;
+}
+
+
 #endif

cores/rp2040/RP2040USB.h

@@ -26,6 +26,7 @@ extern void __USBInstallSerial() __attribute__((weak));
 extern void __USBInstallKeyboard() __attribute__((weak));
 extern void __USBInstallJoystick() __attribute__((weak));
 extern void __USBInstallMouse() __attribute__((weak));
+extern void __USBInstallMassStorage() __attribute__((weak));
 
 // Big, global USB mutex, shared with all USB devices to make sure we don't
 // have multiple cores updating the TUSB state in parallel

cores/rp2040/RP2040Version.h

@@ -1,5 +1,5 @@
 #pragma once
 #define ARDUINO_PICO_MAJOR 2
-#define ARDUINO_PICO_MINOR 6
-#define ARDUINO_PICO_REVISION 3
-#define ARDUINO_PICO_VERSION_STR "2.6.3"
+#define ARDUINO_PICO_MINOR 7
+#define ARDUINO_PICO_REVISION 0
+#define ARDUINO_PICO_VERSION_STR "2.7.0"

cores/rp2040/SerialUART.cpp

@@ -390,7 +390,12 @@ void __not_in_flash_func(SerialUART::_handleIRQ)(bool inIRQ) {
     // ICR is write-to-clear
     uart_get_hw(_uart)->icr = UART_UARTICR_RTIC_BITS | UART_UARTICR_RXIC_BITS;
     while (uart_is_readable(_uart)) {
-        auto val = uart_getc(_uart);
+        uint32_t raw = uart_get_hw(_uart)->dr;
+        if (raw & 0x700) {
+            // Framing, Parity, or Break.  Ignore this bad char
+            continue;
+        }
+        uint8_t val = raw & 0xff;
         auto next_writer = _writer + 1;
         if (next_writer == _fifoSize) {
             next_writer = 0;

cores/rp2040/_freertos.h

@@ -41,8 +41,10 @@ extern "C" {
     extern SemaphoreHandle_t _freertos_recursive_mutex_create() __attribute__((weak));
 
     extern void __freertos_mutex_take(SemaphoreHandle_t mtx) __attribute__((weak));
+    extern void __freertos_mutex_take_from_isr(SemaphoreHandle_t mtx) __attribute__((weak));
     extern int __freertos_mutex_try_take(SemaphoreHandle_t mtx) __attribute__((weak));
     extern void __freertos_mutex_give(SemaphoreHandle_t mtx) __attribute__((weak));
+    extern void __freertos_mutex_give_from_isr(SemaphoreHandle_t mtx) __attribute__((weak));
 
     extern void __freertos_recursive_mutex_take(SemaphoreHandle_t mtx) __attribute__((weak));
     extern int __freertos_recursive_mutex_try_take(SemaphoreHandle_t mtx) __attribute__((weak));

cores/rp2040/main.cpp

@@ -125,7 +125,6 @@ extern "C" int main() {
     }
 #endif
 
-#ifndef NO_USB
     if (!__isFreeRTOS) {
         if (setup1 || loop1) {
             rp2040.fifo.begin(2);
@@ -134,7 +133,6 @@ extern "C" int main() {
         }
         rp2040.fifo.registerCore();
     }
-#endif
 
     if (!__isFreeRTOS) {
         if (setup1 || loop1) {

cores/rp2040/sdkoverride/cyw43_arch_threadsafe_background.c

@@ -6,7 +6,7 @@
 
 // Taken from the Pico-SDK v1.4.0 and hacked by EFP3 to allow overriding the LWIP setup
 
-#include <stdio.h>
+//#include <stdio.h>
 
 #include "pico/cyw43_arch.h"
 #include "pico/mutex.h"

cores/rp2040/wiring_analog.cpp

@@ -26,9 +26,12 @@
 #include <hardware/pll.h>
 #include <hardware/adc.h>
 
+void __clearADCPin(pin_size_t p);
+
 static uint32_t analogScale = 255;
 static uint32_t analogFreq = 1000;
 static uint32_t pwmInitted = 0;
+static bool scaleInitted = false;
 static bool adcInitted = false;
 static uint16_t analogWritePseudoScale = 1;
 static uint16_t analogWriteSlowScale = 1;
@@ -49,6 +52,7 @@ extern "C" void analogWriteFreq(uint32_t freq) {
         analogFreq = freq;
     }
     pwmInitted = 0;
+    scaleInitted = false;
 }
 
 extern "C" void analogWriteRange(uint32_t range) {
@@ -58,6 +62,7 @@ extern "C" void analogWriteRange(uint32_t range) {
     if ((range >= 3) && (range <= 65535)) {
         analogScale = range;
         pwmInitted = 0;
+        scaleInitted = false;
     } else {
         DEBUGCORE("ERROR: analogWriteRange out of range (%d)\n", range);
     }
@@ -78,7 +83,8 @@ extern "C" void analogWrite(pin_size_t pin, int val) {
         DEBUGCORE("ERROR: Illegal analogWrite pin (%d)\n", pin);
         return;
     }
-    if (!(pwmInitted & (1 << pin))) {
+    __clearADCPin(pin);
+    if (!scaleInitted) {
         // For low frequencies, we need to scale the output max value up to achieve lower periods
         analogWritePseudoScale = 1;
         while (((clock_get_hz(clk_sys) / ((float)analogScale * analogFreq)) > 255.0) && (analogScale < 32678)) {
@@ -93,11 +99,14 @@ extern "C" void analogWrite(pin_size_t pin, int val) {
             analogScale /= 2;
             DEBUGCORE("Adjusting analogWrite values SS=%d, scale=%d\n", analogWriteSlowScale, analogScale);
         }
+        scaleInitted = true;
+    }
+    if (!(pwmInitted & (1 << pwm_gpio_to_slice_num(pin)))) {
         pwm_config c = pwm_get_default_config();
         pwm_config_set_clkdiv(&c, clock_get_hz(clk_sys) / ((float)analogScale * analogFreq));
         pwm_config_set_wrap(&c, analogScale - 1);
         pwm_init(pwm_gpio_to_slice_num(pin), &c, true);
-        pwmInitted |= 1 << pin;
+        pwmInitted |= 1 << pwm_gpio_to_slice_num(pin);
     }
 
     val <<= analogWritePseudoScale;
@@ -114,7 +123,13 @@ extern "C" void analogWrite(pin_size_t pin, int val) {
 }
 
 auto_init_mutex(_adcMutex);
-static int _readBits = 10;
+static uint8_t _readBits = 10;
+static uint8_t _lastADCMux = 0;
+static uint32_t _adcGPIOInit = 0;
+
+void __clearADCPin(pin_size_t p) {
+    _adcGPIOInit &= ~(1 << p);
+}
 
 extern "C" int analogRead(pin_size_t pin) {
     CoreMutex m(&_adcMutex);
@@ -130,12 +145,18 @@ extern "C" int analogRead(pin_size_t pin) {
         adc_init();
         adcInitted = true;
     }
-    adc_gpio_init(pin);
-    adc_select_input(pin - minPin);
+    if (!(_adcGPIOInit & (1 << pin))) {
+        adc_gpio_init(pin);
+        _adcGPIOInit |= 1 << pin;
+    }
+    if (_lastADCMux != pin) {
+        adc_select_input(pin - minPin);
+        _lastADCMux = pin;
+    }
     return (_readBits < 12) ? adc_read() >> (12 - _readBits) : adc_read() << (_readBits - 12);
 }
 
-extern "C" float analogReadTemp() {
+extern "C" float analogReadTemp(float vref) {
     CoreMutex m(&_adcMutex);
 
     if (!m) {
@@ -145,12 +166,13 @@ extern "C" float analogReadTemp() {
         adc_init();
         adcInitted = true;
     }
+    _lastADCMux = 0;
     adc_set_temp_sensor_enabled(true);
     delay(1); // Allow things to settle.  Without this, readings can be erratic
     adc_select_input(4); // Temperature sensor
     int v = adc_read();
     adc_set_temp_sensor_enabled(false);
-    float t = 27.0f - ((v * 3.3f / 4096.0f) - 0.706f) / 0.001721f; // From the datasheet
+    float t = 27.0f - ((v * vref / pow(2, _readBits)) - 0.706f) / 0.001721f; // From the datasheet
     return t;
 }
 

cores/rp2040/wiring_digital.cpp

@@ -21,6 +21,8 @@
 #include "Arduino.h"
 #include <hardware/gpio.h>
 
+extern void __clearADCPin(pin_size_t p);
+
 static PinMode _pm[30];
 
 extern "C" void pinMode(pin_size_t ulPin, PinMode ulMode) __attribute__((weak, alias("__pinMode")));
@@ -75,6 +77,10 @@ extern "C" void __pinMode(pin_size_t ulPin, PinMode ulMode) {
         return;
     }
     _pm[ulPin] = ulMode;
+
+    if ((ulPin >= std::min(A0, A3)) && (ulPin <= std::max(A0, A3))) {
+        __clearADCPin(ulPin);
+    }
 }
 
 extern "C" void digitalWrite(pin_size_t ulPin, PinStatus ulVal) __attribute__((weak, alias("__digitalWrite")));

cores/rp2040/wiring_private.cpp

@@ -77,7 +77,7 @@ static std::map<pin_size_t, CBInfo> _map;
 void _gpioInterruptDispatcher(uint gpio, uint32_t events) {
     (void) events;
     // Only need to lock around the std::map check, not the whole IRQ callback
-    CoreMutex m(&_irqMutex);
+    CoreMutex m(&_irqMutex, (FromISR | DebugEnable));
     if (m) {
         auto irq = _map.find(gpio);
         if (irq != _map.end()) {

docs/analog.rst

@@ -18,9 +18,10 @@ void analogReadResolution(int bits)
 Determines the resolution (in bits) of the value returned by the analogRead() function.
 Default resolution is 10bit.
 
-float analogReadTemp()
+float analogReadTemp(float vref = 3.3f)
 ~~~~~~~~~~~~~~~~~~~~~~
 Returns the temperature, in Celsius, of the onboard thermal sensor.
+If you have a custom Vref for the ADC on your RP2040 board, you can pass it in as a parameter.  Calling with no parameters assumes the normal, 3.3V Vref.
 This reading is not exceedingly accurate and of relatively low
 resolution, so it is not a replacement for an external temperature
 sensor in many cases.

docs/conf.py

@@ -54,9 +54,9 @@ author = u'Earle F. Philhower, III'
 # built documents.
 #
 # The short X.Y version.
-version = u'2.6.3'
+version = u'2.7.0'
 # The full version, including alpha/beta/rc tags.
-release = u'2.6.3'
+release = u'2.7.0'
 
 # The language for content autogenerated by Sphinx. Refer to documentation
 # for a list of supported languages.

docs/index.rst

@@ -39,6 +39,8 @@ For the latest version, always check https://github.com/earlephilhower/arduino-p
    USB (Arduino and Adafruit_TinyUSB) <usb>
    Multicore Processing <multicore>
 
+   Single File USB Drive <singlefile>
+
    FreeRTOS SMP (multicore) <freertos>
 
    WiFi (Pico-W Support) <wifi>

docs/rp2040.rst

@@ -38,12 +38,12 @@ void rp2040.reboot()
 Forces a hardware reboot of the Pico.
 
 Hardware Watchdog
-_________________
+-----------------
 
 void rp2040.wdt_begin(uint32_t delay_ms)
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 Enables the hardware watchdog timer with a delay value of delay_ms
-microseconds. Note that on the RP2040, once this function has called, the
+milliseconds. Note that on the RP2040, once this function has called, the
 hardware watchdog can _not_ be disabled.
 
 void rp2040.wdt_reset()

docs/singlefile.rst

@@ -0,0 +1,82 @@
+SingleFileDrive
+===============
+
+USB drive mode is supported through the ``SingleFileDrive`` class which
+allows the Pico to emulate a FAT-formatted USB stick while preserving the
+onboard LittleFS filesystem.  A single file can be exported this way without
+needing to use FAT as the onboard filesystem (FAT is not appropriate for
+flash-based devices without complicated wear leveling because of the update
+frequency of the FAT tables).
+
+This emulation is very simple and only allows for the reading of the single
+file, and deleting it.
+
+Callbacks, Interrupt Safety, and File Operations
+------------------------------------------------
+
+The ``SingleFileDrive`` library allows your application to get a callback
+when a PC attempts to mount or unmount the Pico as a drive.  Your app can
+also get a callback if the user attempts to delete the file (but your
+sketch does not actually need to delete the file, it's up to you).
+
+Note that when the USB drive is mounted by a PC it is not safe for your
+main sketch to make changes to the LittleFS filesystem or the file being
+exported.  So, normally, your ``onPlug`` callback will set a flag letting
+your application know not to touch the filesystem, with the ``onUnplug``
+callback clearing this flag.
+
+Also, because the USB port can be connected at any time, it is important
+to disable interrupts using ``noInterrupts()`` before writing to a file
+you will be exporting (and restoring them with ``interrupts()`` afterwards).
+It is also important to ``close()`` the file after each update, or the
+on-flash version the ``SingleFileDrive`` will attempt to export may not be
+up to date causing issues later on.
+
+See the included ``DataLoggerUSB`` sketch for an example of working with
+these limitations.
+
+Using SingleFileDrive
+---------------------
+
+Implementing the drive requires including the header file, starting LittleFS,
+defining your callbacks, and telling the library what file to export.  No
+polling or other calls are required outside of your ``setup()``.  (Note that
+the callback routines allow for a parameter to be passed to them, but in most
+cases this can be safely ignored.)
+
+.. code:: cpp
+
+        #include <LittleFS.h>
+        #include <SingleFileDrive.h>
+
+        void myPlugCB(uint32_t data) {
+            // Tell my app not to write to flash, we're connected
+        }
+
+        void myUnplugCB(uint32_t data) {
+            // I can start writing to flash again
+        }
+
+        void myDeleteDB(uint32_t data) {
+            // Maybe LittleFS.remove("myfile.txt")?  or do nothing
+        }
+
+        void setup() {
+            LittleFS.begin();
+            singleFileDrive.onPlug(myPlugCB);
+            singleFileDrive.onUnplug(myUnplugCB);
+            singleFileDrive.onDelete(myDeleteCB);
+            singleFileDrive.begin("littlefsfile.csv", "Data Recorder.csv");
+            // ... rest of setup ...
+        }
+
+        void loop() {
+            // Take some measurements, delay, etc.
+            if (okay-to-write) {
+                noInterrupts();
+                File f = LittleFS.open("littlefsfile.csv", "a");
+                f.printf("%d,%d,%d\n", data1, data2, data3);
+                f.close();
+                interrupts();
+            }
+        }

include/tusb_config.h

@@ -72,15 +72,14 @@
 //------------- CLASS -------------//
 #define CFG_TUD_HID              (2)
 #define CFG_TUD_CDC              (1)
-#define CFG_TUD_MSC              (0)
+#define CFG_TUD_MSC              (1)
 #define CFG_TUD_MIDI             (0)
 #define CFG_TUD_VENDOR           (0)
 
 #define CFG_TUD_CDC_RX_BUFSIZE  (256)
 #define CFG_TUD_CDC_TX_BUFSIZE  (256)
 
-#define CFG_TUD_MIDI_RX_BUFSIZE (64)
-#define CFG_TUD_MIDI_TX_BUFSIZE (64)
+#define CFG_TUD_MSC_EP_BUFSIZE  (64)
 
 // HID buffer size Should be sufficient to hold ID (if any) + Data
 #define CFG_TUD_HID_EP_BUFSIZE  (64)

keywords.txt

@@ -54,6 +54,9 @@ SerialPIO	KEYWORD2
 setFIFOSize	KEYWORD2
 setPollingMode	KEYWORD2
 
+digitalWriteFast	KEYWORD2
+digitalReadFast	KEYWORD2
+
 enableDoubleResetBootloader	KEYWORD2
 
 OUTPUT_2MA	LITERAL1

libraries/AudioBufferManager/library.properties

@@ -0,0 +1,10 @@
+name=AudioBufferManager
+version=1.0.0
+author=Earle F. Philhower, III <earlephilhower@yahoo.com>
+maintainer=Earle F. Philhower, III <earlephilhower@yahoo.com>
+sentence=Manages DMA buffers for audio output
+paragraph=Manages DMA buffers for audio output
+category=Device Control
+url=https://github.com/earlephilhower/arduino-pico
+architectures=rp2040
+dot_a_linkage=true

libraries/AudioBufferManager/src/AudioBufferManager.cpp

@@ -1,6 +1,6 @@
 /*
-    AudioRingBuffer for Raspnerry Pi Pico RP2040
-    Implements a ring buffer for PIO DMA for I2S read or write
+    AudioBufferManager for Raspnerry Pi Pico RP2040
+    Implements a DMA controlled linked-list series of buffers
 
     Copyright (c) 2022 Earle F. Philhower, III <earlephilhower@yahoo.com>
 
@@ -20,47 +20,60 @@
 */
 
 #include <Arduino.h>
-#include <vector>
 #include "hardware/dma.h"
 #include "hardware/irq.h"
-#include "hardware/pio.h"
-#include "pio_i2s.pio.h"
-#include "AudioRingBuffer.h"
+#include "AudioBufferManager.h"
 
-static int              __channelCount = 0;    // # of channels left.  When we hit 0, then remove our handler
-static AudioRingBuffer* __channelMap[12];      // Lets the IRQ handler figure out where to dispatch to
+static int                 __channelCount = 0;    // # of channels left.  When we hit 0, then remove our handler
+static AudioBufferManager* __channelMap[12];      // Lets the IRQ handler figure out where to dispatch to
 
-AudioRingBuffer::AudioRingBuffer(size_t bufferCount, size_t bufferWords, int32_t silenceSample, PinMode direction) {
+AudioBufferManager::AudioBufferManager(size_t bufferCount, size_t bufferWords, int32_t silenceSample, PinMode direction, enum dma_channel_transfer_size dmaSize) {
     _running = false;
-    _silenceSample = silenceSample;
+
+    // Need at least 2 DMA buffers and 1 user or this isn't going to work at all
+    if (bufferCount < 3) {
+        bufferCount = 3;
+    }
+
     _bufferCount = bufferCount;
     _wordsPerBuffer = bufferWords;
     _isOutput = direction == OUTPUT;
+    _dmaSize = dmaSize;
     _overunderflow = false;
     _callback = nullptr;
-    _userBuffer = -1;
     _userOff = 0;
+
+    // Create the silence buffer, fill with appropriate value
+    _silence = new AudioBuffer;
+    _silence->next = nullptr;
+    _silence->buff = new uint32_t[_wordsPerBuffer];
+    for (uint32_t x = 0; x < _wordsPerBuffer; x++) {
+        _silence->buff[x] = silenceSample;
+    }
+
+    // No filled buffers yet
+    _filled = nullptr;
+
+    // Create all buffers on the empty chain
+    _empty = nullptr;
     for (size_t i = 0; i < bufferCount; i++) {
         auto ab = new AudioBuffer;
         ab->buff = new uint32_t[_wordsPerBuffer];
-        ab->empty = true;
-        _buffers.push_back(ab);
+        ab->next = nullptr;
+        _addToList(&_empty, ab);
     }
+
+    _active[0] = _silence;
+    _active[1] = _silence;
 }
 
-AudioRingBuffer::~AudioRingBuffer() {
+AudioBufferManager::~AudioBufferManager() {
     if (_running) {
         for (auto i = 0; i < 2; i++) {
             dma_channel_set_irq0_enabled(_channelDMA[i], false);
             dma_channel_unclaim(_channelDMA[i]);
             __channelMap[_channelDMA[i]] = nullptr;
         }
-        while (_buffers.size()) {
-            auto ab = _buffers.back();
-            _buffers.pop_back();
-            delete[] ab->buff;
-            delete ab;
-        }
         __channelCount--;
         if (!__channelCount) {
             irq_set_enabled(DMA_IRQ_0, false);
@@ -68,23 +81,31 @@ AudioRingBuffer::~AudioRingBuffer() {
             irq_remove_handler(DMA_IRQ_0, _irq);
         }
     }
+    for (int i = 0; i < 2; i++) {
+        if (_active[i] != _silence) {
+            _deleteAudioBuffer(_active[i]);
+        }
+    }
+    while (_filled) {
+        auto x = _filled->next;
+        _deleteAudioBuffer(_filled);
+        _filled = x;
+    }
+    while (_empty) {
+        auto x = _empty->next;
+        _deleteAudioBuffer(_empty);
+        _empty = x;
+    }
+    _deleteAudioBuffer(_silence);
 }
 
-void AudioRingBuffer::setCallback(void (*fn)()) {
+void AudioBufferManager::setCallback(void (*fn)()) {
     _callback = fn;
 }
 
-bool AudioRingBuffer::begin(int dreq, volatile void *pioFIFOAddr) {
+bool AudioBufferManager::begin(int dreq, volatile void *pioFIFOAddr) {
     _running = true;
-    // Set all buffers to silence, empty
-    for (auto buff : _buffers) {
-        buff->empty = true;
-        if (_isOutput) {
-            for (uint32_t x = 0; x < _wordsPerBuffer; x++) {
-                buff->buff[x] = _silenceSample;
-            }
-        }
-    }
+
     // Get ping and pong DMA channels
     for (auto i = 0; i < 2; i++) {
         _channelDMA[i] = dma_claim_unused_channel(true);
@@ -99,7 +120,7 @@ bool AudioRingBuffer::begin(int dreq, volatile void *pioFIFOAddr) {
     // Need to know both channels to set up ping-pong, so do in 2 stages
     for (auto i = 0; i < 2; i++) {
         dma_channel_config c = dma_channel_get_default_config(_channelDMA[i]);
-        channel_config_set_transfer_data_size(&c, DMA_SIZE_32); // 32b transfers into PIO FIFO
+        channel_config_set_transfer_data_size(&c, _dmaSize); // 16b/32b transfers into PIO FIFO
         if (_isOutput) {
             channel_config_set_read_increment(&c, true); // Reading incrementing addresses
             channel_config_set_write_increment(&c, false); // Writing to the same FIFO address
@@ -112,9 +133,10 @@ bool AudioRingBuffer::begin(int dreq, volatile void *pioFIFOAddr) {
         channel_config_set_irq_quiet(&c, false); // Need IRQs
 
         if (_isOutput) {
-            dma_channel_configure(_channelDMA[i], &c, pioFIFOAddr, _buffers[i]->buff, _wordsPerBuffer, false);
+            dma_channel_configure(_channelDMA[i], &c, pioFIFOAddr, _silence->buff, _wordsPerBuffer, false);
         } else {
-            dma_channel_configure(_channelDMA[i], &c, _buffers[i]->buff, pioFIFOAddr, _wordsPerBuffer, false);
+            _active[i] = _takeFromList(&_empty);
+            dma_channel_configure(_channelDMA[i], &c, _active[i]->buff, pioFIFOAddr, _wordsPerBuffer, false);
         }
         dma_channel_set_irq0_enabled(_channelDMA[i], true);
         __channelMap[_channelDMA[i]] = this;
@@ -124,130 +146,127 @@ bool AudioRingBuffer::begin(int dreq, volatile void *pioFIFOAddr) {
         irq_add_shared_handler(DMA_IRQ_0, _irq, PICO_SHARED_IRQ_HANDLER_DEFAULT_ORDER_PRIORITY);
         irq_set_enabled(DMA_IRQ_0, true);
     }
-    _curBuffer = 0;
-    _nextBuffer = 2 % _bufferCount;
+
     dma_channel_start(_channelDMA[0]);
     return true;
 }
 
-bool AudioRingBuffer::write(uint32_t v, bool sync) {
+// Following 2 routines use volatile because the IRQ may update the "this"
+// pointer and change the list head while we are waiting.  Volatile will
+// cause GCC to keep re-reading from memory and not use cached value read
+// on the first pass.
+
+bool AudioBufferManager::write(uint32_t v, bool sync) {
     if (!_running || !_isOutput) {
         return false;
     }
-    if (_userBuffer == -1) {
-        // First write or overflow, pick spot 2 buffers out
-        _userBuffer = (_nextBuffer + 2) % _bufferCount;
-        _userOff = 0;
-    }
-    if (!_buffers[_userBuffer]->empty) {
+    AudioBuffer ** volatile p = (AudioBuffer ** volatile)&_empty;
+    if (!*p) {
         if (!sync) {
             return false;
         } else {
-            while (!_buffers[_userBuffer]->empty) {
+            while (!*p) {
                 /* noop busy wait */
             }
         }
     }
-    if (_userBuffer == _curBuffer) {
-        if (!sync) {
-            return false;
-        } else {
-            while (_userBuffer == _curBuffer) {
-                /* noop busy wait */
-            }
-        }
-    }
-    _buffers[_userBuffer]->buff[_userOff++] = v;
+    (*p)->buff[_userOff++] = v;
     if (_userOff == _wordsPerBuffer) {
-        _buffers[_userBuffer]->empty = false;
-        _userBuffer = (_userBuffer + 1) % _bufferCount;
+        _addToList(&_filled, _takeFromList(p));
         _userOff = 0;
     }
     return true;
 }
 
-bool AudioRingBuffer::read(uint32_t *v, bool sync) {
+bool AudioBufferManager::read(uint32_t *v, bool sync) {
     if (!_running || _isOutput) {
         return false;
     }
-    if (_userBuffer == -1) {
-        // First write or overflow, pick last filled buffer
-        _userBuffer = (_curBuffer - 1 + _bufferCount) % _bufferCount;
-        _userOff = 0;
-    }
-    if (_buffers[_userBuffer]->empty) {
+
+    AudioBuffer ** volatile p = (AudioBuffer ** volatile)&_filled;
+    if (!*p) {
         if (!sync) {
             return false;
         } else {
-            while (_buffers[_userBuffer]->empty) {
+            while (!*p) {
                 /* noop busy wait */
             }
         }
     }
-    if (_userBuffer == _curBuffer) {
-        if (!sync) {
-            return false;
-        } else {
-            while (_userBuffer == _curBuffer) {
-                /* noop busy wait */
-            }
-        }
-    }
-    auto ret = _buffers[_userBuffer]->buff[_userOff++];
+    auto ret = (*p)->buff[_userOff++];
     if (_userOff == _wordsPerBuffer) {
-        _buffers[_userBuffer]->empty = true;
-        _userBuffer = (_userBuffer + 1) % _bufferCount;
+        _addToList(&_empty, _takeFromList(p));
         _userOff = 0;
     }
     *v = ret;
     return true;
 }
 
-bool AudioRingBuffer::getOverUnderflow() {
+bool AudioBufferManager::getOverUnderflow() {
     bool hold = _overunderflow;
     _overunderflow = false;
     return hold;
 }
 
-int AudioRingBuffer::available() {
-    if (!_running) {
+int AudioBufferManager::available() {
+    AudioBuffer *p = _isOutput ? _empty : _filled;
+
+    if (!_running || !p) {
+        // No buffers available...
         return 0;
     }
-    int avail;
-    avail = _wordsPerBuffer - _userOff;
-    avail += ((_bufferCount + _curBuffer - _userBuffer) % _bufferCount) * _wordsPerBuffer;
+
+    int avail = _wordsPerBuffer - _userOff; // Currently available in this buffer
+
+    // Each add'l buffer has wpb spaces...
+    auto x = p->next;
+    while (x) {
+        avail += _wordsPerBuffer;
+        x = x->next;
+    }
     return avail;
 }
 
-void AudioRingBuffer::flush() {
-    while (_curBuffer != _userBuffer) {
-        // busy wait
+void AudioBufferManager::flush() {
+    AudioBuffer ** volatile a = (AudioBuffer ** volatile)&_active[0];
+    AudioBuffer ** volatile b = (AudioBuffer ** volatile)&_active[1];
+    AudioBuffer ** volatile c = (AudioBuffer ** volatile)&_filled;
+    while (*c && (*b != (AudioBuffer * volatile)_silence) && (*a != (AudioBuffer * volatile)_silence)) {
+        // busy wait until all user written data enroute
     }
 }
 
-void __not_in_flash_func(AudioRingBuffer::_dmaIRQ)(int channel) {
+void __not_in_flash_func(AudioBufferManager::_dmaIRQ)(int channel) {
     if (_isOutput) {
-        for (uint32_t x = 0; x < _wordsPerBuffer; x++) {
-            _buffers[_curBuffer]->buff[x] = _silenceSample;
+        if (_active[0] != _silence) {
+            _addToList(&_empty, _active[0]);
         }
-        _buffers[_curBuffer]-> empty = true;
-        _overunderflow = _overunderflow | _buffers[_nextBuffer]->empty;
-        dma_channel_set_read_addr(channel, _buffers[_nextBuffer]->buff, false);
+        _active[0] = _active[1];
+        if (!_filled) {
+            _active[1] = _silence;
+        } else {
+            _active[1] = _takeFromList(&_filled);
+        }
+        _overunderflow = _overunderflow | (_active[1] == _silence);
+        dma_channel_set_read_addr(channel, _active[0]->buff, false);
     } else {
-        _buffers[_curBuffer]-> empty = false;
-        _overunderflow = _overunderflow | !_buffers[_nextBuffer]->empty;
-        dma_channel_set_write_addr(channel, _buffers[_nextBuffer]->buff, false);
+        if (_empty) {
+            _addToList(&_filled, _active[0]);
+            _active[0] = _active[1];
+            _active[1] = _takeFromList(&_empty);
+        } else {
+            _overunderflow = true;
+        }
+        dma_channel_set_write_addr(channel, _active[0]->buff, false);
     }
     dma_channel_set_trans_count(channel, _wordsPerBuffer, false);
-    _curBuffer = (_curBuffer + 1) % _bufferCount;
-    _nextBuffer = (_nextBuffer + 1) % _bufferCount;
     dma_channel_acknowledge_irq0(channel);
     if (_callback) {
         _callback();
     }
 }
 
-void __not_in_flash_func(AudioRingBuffer::_irq)() {
+void __not_in_flash_func(AudioBufferManager::_irq)() {
     for (size_t i = 0; i < sizeof(__channelMap); i++) {
         if (dma_channel_get_irq0_status(i) && __channelMap[i]) {
             __channelMap[i]->_dmaIRQ(i);

libraries/AudioBufferManager/src/AudioBufferManager.h

@@ -0,0 +1,102 @@
+/*
+    AudioBufferManager for Rasperry Pi Pico
+    Implements a DMA controlled linked-list series of buffers
+
+    Copyright (c) 2022 Earle F. Philhower, III <earlephilhower@yahoo.com>
+
+    This library is free software; you can redistribute it and/or
+    modify it under the terms of the GNU Lesser General Public
+    License as published by the Free Software Foundation; either
+    version 2.1 of the License, or (at your option) any later version.
+
+    This library is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+    Lesser General Public License for more details.
+
+    You should have received a copy of the GNU Lesser General Public
+    License along with this library; if not, write to the Free Software
+    Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#pragma once
+#include <Arduino.h>
+#include "hardware/dma.h"
+
+class AudioBufferManager {
+public:
+    AudioBufferManager(size_t bufferCount, size_t bufferWords, int32_t silenceSample, PinMode direction = OUTPUT, enum dma_channel_transfer_size dmaSize = DMA_SIZE_32);
+    ~AudioBufferManager();
+
+    void setCallback(void (*fn)());
+
+    bool begin(int dreq, volatile void *pioFIFOAddr);
+
+    bool write(uint32_t v, bool sync = true);
+    bool read(uint32_t *v, bool sync = true);
+    void flush();
+
+    bool getOverUnderflow();
+    int available();
+
+private:
+    void _dmaIRQ(int channel);
+    static void _irq();
+
+    typedef struct AudioBuffer {
+        struct AudioBuffer *next;
+        uint32_t *buff;
+    } AudioBuffer;
+
+    bool _running = false;
+
+    AudioBuffer *_silence = nullptr; // A single silence buffer to be looped on underflow
+    AudioBuffer *_filled = nullptr;  // List of buffers ready to be played
+    AudioBuffer *_empty = nullptr;   // List of buffers waiting to be filled. *_empty = currently writing
+    AudioBuffer *_active[2] = { nullptr, nullptr }; // The 2 buffers currently in use for DMA
+
+    // Can't use std::list because we need to put in RAM for IRQ use, so roll our own
+    void __not_in_flash_func(_addToList)(AudioBuffer **list, AudioBuffer *element) {
+        noInterrupts();
+        // Find end of list, if any
+        while ((*list) && ((*list)->next != nullptr)) {
+            list = &(*list)->next;
+        }
+        if (*list) {
+            (*list)->next = element;
+        } else {
+            *list = element;
+        }
+        element->next = nullptr; // Belt and braces
+        interrupts();
+    }
+
+    AudioBuffer *__not_in_flash_func(_takeFromList)(AudioBuffer **list) {
+        noInterrupts();
+        auto ret = *list;
+        if (ret) {
+            *list = ret->next;
+        }
+        interrupts();
+        return ret;
+    }
+
+    void _deleteAudioBuffer(AudioBuffer *ab) {
+        delete[] ab->buff;
+        delete ab;
+    }
+
+    int _bitsPerSample;
+    size_t _wordsPerBuffer;
+    size_t _bufferCount;
+    enum dma_channel_transfer_size _dmaSize;
+    bool _isOutput;
+
+    int _channelDMA[2];
+    void (*_callback)();
+
+    bool _overunderflow;
+
+    // User buffer pointer
+    size_t _userOff = 0;
+};

libraries/EEPROM/src/EEPROM.cpp

@@ -45,7 +45,7 @@ void EEPROMClass::begin(size_t size) {
         size = 4096;
     }
 
-    _size = (size + 255) & (~255);  // Flash writes limited to 256 byte boundaries
+    size = (size + 255) & (~255);  // Flash writes limited to 256 byte boundaries
 
     // In case begin() is called a 2nd+ time, don't reallocate if size is the same
     if (_data && size != _size) {
@@ -55,6 +55,8 @@ void EEPROMClass::begin(size_t size) {
         _data = new uint8_t[size];
     }
 
+    _size = size;
+
     memcpy(_data, _sector, _size);
 
     _dirty = false; //make sure dirty is cleared in case begin() is called 2nd+ time

libraries/FreeRTOS/src/variantHooks.cpp

@@ -59,7 +59,7 @@ volatile bool __usbInitted = false;
 
 static void __core0(void *params) {
     (void) params;
-#ifndef NO_USB
+#if !defined(NO_USB) && !defined(USE_TINYUSB)
     while (!__usbInitted) {
         delay(1);
     }
@@ -81,7 +81,7 @@ static void __core0(void *params) {
 
 static void __core1(void *params) {
     (void) params;
-#ifndef NO_USB
+#if !defined(NO_USB) && !defined(USE_TINYUSB)
     while (!__usbInitted) {
         delay(1);
     }
@@ -414,6 +414,10 @@ extern "C" {
         xSemaphoreTake(mtx, portMAX_DELAY);
     }
 
+    void __freertos_mutex_take_from_isr(SemaphoreHandle_t mtx) {
+        xSemaphoreTakeFromISR(mtx, NULL);
+    }
+
     int __freertos_mutex_try_take(SemaphoreHandle_t mtx) {
         return xSemaphoreTake(mtx, 0);
     }
@@ -422,6 +426,10 @@ extern "C" {
         xSemaphoreGive(mtx);
     }
 
+    void __freertos_mutex_give_from_isr(SemaphoreHandle_t mtx) {
+        xSemaphoreGiveFromISR(mtx, NULL);
+    }
+
     void __freertos_recursive_mutex_take(SemaphoreHandle_t mtx) {
         xSemaphoreTakeRecursive(mtx, portMAX_DELAY);
     }

libraries/I2S/keywords.txt

@@ -18,6 +18,7 @@ setBCLK	KEYWORD2
 setDATA	KEYWORD2
 setBitsPerSample	KEYWORD2
 setFrequency	KEYWORD2
+setBuffers	KEYWORD2
 
 read8	KEYWORD2
 read16	KEYWORD2

libraries/I2S/src/AudioRingBuffer.h

@@ -1,69 +0,0 @@
-/*
-    AudioRingBuffer for Rasperry Pi Pico
-    Implements a ring buffer for PIO DMA for I2S read or write
-
-    Copyright (c) 2022 Earle F. Philhower, III <earlephilhower@yahoo.com>
-
-    This library is free software; you can redistribute it and/or
-    modify it under the terms of the GNU Lesser General Public
-    License as published by the Free Software Foundation; either
-    version 2.1 of the License, or (at your option) any later version.
-
-    This library is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-    Lesser General Public License for more details.
-
-    You should have received a copy of the GNU Lesser General Public
-    License along with this library; if not, write to the Free Software
-    Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
-*/
-
-#pragma once
-#include <Arduino.h>
-#include <vector>
-
-class AudioRingBuffer {
-public:
-    AudioRingBuffer(size_t bufferCount, size_t bufferWords, int32_t silenceSample, PinMode direction = OUTPUT);
-    ~AudioRingBuffer();
-
-    void setCallback(void (*fn)());
-
-    bool begin(int dreq, volatile void *pioFIFOAddr);
-
-    bool write(uint32_t v, bool sync = true);
-    bool read(uint32_t *v, bool sync = true);
-    void flush();
-
-    bool getOverUnderflow();
-    int available();
-
-private:
-    void _dmaIRQ(int channel);
-    static void _irq();
-
-    typedef struct {
-        uint32_t *buff;
-        volatile bool empty;
-    } AudioBuffer;
-
-    bool _running = false;
-    std::vector<AudioBuffer*> _buffers;
-    volatile int _curBuffer;
-    volatile int _nextBuffer;
-    size_t _chunkSampleCount;
-    int _bitsPerSample;
-    size_t _wordsPerBuffer;
-    size_t _bufferCount;
-    bool _isOutput;
-    int32_t _silenceSample;
-    int _channelDMA[2];
-    void (*_callback)();
-
-    bool _overunderflow;
-
-    // User buffer pointer
-    int _userBuffer = -1;
-    size_t _userOff = 0;
-};

libraries/I2S/src/I2S.cpp

@@ -27,14 +27,29 @@ I2S::I2S(PinMode direction) {
     _running = false;
     _bps = 16;
     _writtenHalf = false;
+    _isOutput = direction == OUTPUT;
     _pinBCLK = 26;
     _pinDOUT = 28;
+#ifdef PIN_I2S_BCLK
+    _pinBCLK = PIN_I2S_BCLK;
+#endif
+
+#ifdef PIN_I2S_DOUT
+    if (_isOutput) {
+        _pinDOUT = PIN_I2S_DOUT;
+    }
+#endif
+
+#ifdef PIN_I2S_DIN
+    if (!_isOutput) {
+        _pinDOUT = PIN_I2S_DIN;
+    }
+#endif
     _freq = 48000;
     _arb = nullptr;
-    _isOutput = direction == OUTPUT;
     _cb = nullptr;
     _buffers = 8;
-    _bufferWords = 16;
+    _bufferWords = 0;
     _silenceSample = 0;
 }
 
@@ -121,7 +136,10 @@ bool I2S::begin() {
         uint16_t a = _silenceSample & 0xffff;
         _silenceSample = (a << 16) | a;
     }
-    _arb = new AudioRingBuffer(_buffers, _bufferWords, _silenceSample, _isOutput ? OUTPUT : INPUT);
+    if (!_bufferWords) {
+        _bufferWords = 16 * (_bps == 32 ? 2 : 1);
+    }
+    _arb = new AudioBufferManager(_buffers, _bufferWords, _silenceSample, _isOutput ? OUTPUT : INPUT);
     _arb->begin(pio_get_dreq(_pio, _sm, _isOutput), _isOutput ? &_pio->txf[_sm] : (volatile void*)&_pio->rxf[_sm]);
     _arb->setCallback(_cb);
     pio_sm_set_enabled(_pio, _sm, true);
@@ -138,10 +156,13 @@ void I2S::end() {
 }
 
 int I2S::available() {
-    if (!_running || _isOutput) {
+    if (!_running) {
         return 0;
+    } else if (_isOutput) {
+        return availableForWrite(); // Do what I mean, not what I say
+    } else {
+        return _arb->available();
     }
-    return _arb->available();
 }
 
 int I2S::read() {

libraries/I2S/src/I2S.h

@@ -21,8 +21,7 @@
 
 #pragma once
 #include <Arduino.h>
-#include <vector>
-#include "AudioRingBuffer.h"
+#include "AudioBufferManager.h"
 
 class I2S : public Stream {
 public:
@@ -121,7 +120,7 @@ private:
 
     void (*_cb)();
 
-    AudioRingBuffer *_arb;
+    AudioBufferManager *_arb;
     PIOProgram *_i2s;
     PIO _pio;
     int _sm;

libraries/PWMAudio/examples/PlayRaw/PlayRaw.ino

@@ -0,0 +1,37 @@
+/*
+  This example plays a raw, headerless, mono 16b, 44.1 sample using the PWMAudio library on GPIO 1.
+
+  Released to the public domain by Earle F. Philhower, III <earlephilhower@yahoo.com>
+*/
+
+#include <PWMAudio.h>
+#include "wav.h"
+
+// The sample pointers
+const int16_t *start = (const int16_t *)out_raw;
+const int16_t *p = start;
+
+// Create the PWM audio device on GPIO 1.   Hook amp/speaker between GPIO1 and convenient GND.
+PWMAudio pwm(1);
+
+unsigned int count = 0;
+
+void cb() {
+  while (pwm.availableForWrite()) {
+    pwm.write(*p++);
+    count += 2;
+    if (count >= sizeof(out_raw)) {
+      count = 0;
+      p = start;
+    }
+  }
+}
+
+void setup() {
+  pwm.onTransmit(cb);
+  pwm.begin(44100);
+}
+
+void loop() {
+  /* noop, everything is done in the CB */
+}

libraries/PWMAudio/keywords.txt

@@ -0,0 +1,25 @@
+#######################################
+# Syntax Coloring Map
+#######################################
+
+#######################################
+# Datatypes (KEYWORD1)
+#######################################
+
+PWMAudio	KEYWORD1
+
+#######################################
+# Methods and Functions (KEYWORD2)
+#######################################
+begin	KEYWORD2
+end	KEYWORD2
+
+setPin	KEYWORD2
+setFrequency	KEYWORD2
+setBuffers	KEYWORD2
+
+onTransmit	KEYWORD2
+
+#######################################
+# Constants (LITERAL1)
+#######################################

libraries/PWMAudio/library.properties

@@ -0,0 +1,10 @@
+name=PWMAudio
+version=1.0
+author=Earle F. Philhower, III <earlephilhower@yahoo.com>
+maintainer=Earle F. Philhower, III <earlephilhower@yahoo.com>
+sentence=Plays audio on a pin using the PWM hardware, no DAC required
+paragraph=Plays audio on a pin using the PWM hardware, no DAC required
+category=Communication
+url=http://github.com/earlephilhower/arduino-pico
+architectures=rp2040
+dot_a_linkage=true

libraries/PWMAudio/src/PWMAudio.cpp

@@ -0,0 +1,161 @@
+/*
+    PWMAudio
+    Plays a 16b audio stream on a user defined pin using PWM
+
+    Copyright (c) 2022 Earle F. Philhower, III <earlephilhower@yahoo.com>
+
+    This library is free software; you can redistribute it and/or
+    modify it under the terms of the GNU Lesser General Public
+    License as published by the Free Software Foundation; either
+    version 2.1 of the License, or (at your option) any later version.
+
+    This library is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+    Lesser General Public License for more details.
+
+    You should have received a copy of the GNU Lesser General Public
+    License along with this library; if not, write to the Free Software
+    Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+#include <Arduino.h>
+#include "PWMAudio.h"
+#include <hardware/pwm.h>
+
+
+PWMAudio::PWMAudio(pin_size_t pin) {
+    _running = false;
+    _pin = pin;
+    _freq = 48000;
+    _arb = nullptr;
+    _cb = nullptr;
+    _buffers = 8;
+    _bufferWords = 0;
+}
+
+PWMAudio::~PWMAudio() {
+}
+
+bool PWMAudio::setBuffers(size_t buffers, size_t bufferWords) {
+    if (_running || (buffers < 3) || (bufferWords < 8)) {
+        return false;
+    }
+    _buffers = buffers;
+    _bufferWords = bufferWords;
+    return true;
+}
+
+bool PWMAudio::setFrequency(int newFreq) {
+    if (_running) {
+        return false;
+    }
+    _freq = newFreq;
+    return true;
+}
+
+void PWMAudio::onTransmit(void(*fn)(void)) {
+    _cb = fn;
+    if (_running) {
+        _arb->setCallback(_cb);
+    }
+}
+
+bool PWMAudio::begin() {
+    _running = true;
+
+    if (!_bufferWords) {
+        _bufferWords = 16;
+    }
+
+    // Figure out the scale factor for PWM values
+    float fPWM = 65535.0 * _freq; // ideal
+
+    if (fPWM > clock_get_hz(clk_sys)) {
+        // Need to downscale the range to hit the frequency target
+        float pwmMax = (float) clock_get_hz(clk_sys) /(float) _freq;
+        _pwmScale = pwmMax;
+        fPWM = clock_get_hz(clk_sys);
+    } else {
+        _pwmScale = 1 << 16;
+    }
+
+    pwm_config c = pwm_get_default_config();
+    pwm_config_set_clkdiv(&c, clock_get_hz(clk_sys) / fPWM);
+    pwm_config_set_wrap(&c, _pwmScale);
+    pwm_init(pwm_gpio_to_slice_num(_pin), &c, true);
+    gpio_set_function(_pin, GPIO_FUNC_PWM);
+    pwm_set_gpio_level(_pin, (0x8000 * _pwmScale) >> 16);
+
+    uint32_t ccAddr = PWM_BASE + PWM_CH0_CC_OFFSET + pwm_gpio_to_slice_num(_pin) * 20;
+
+    _arb = new AudioBufferManager(_buffers, _bufferWords, 0x80008000, OUTPUT, DMA_SIZE_32);
+    _arb->begin(pwm_get_dreq(pwm_gpio_to_slice_num(_pin)), (volatile void*)ccAddr);
+    _arb->setCallback(_cb);
+
+    return true;
+}
+
+void PWMAudio::end() {
+    _running = false;
+    delete _arb;
+    _arb = nullptr;
+}
+
+int PWMAudio::available() {
+    return availableForWrite(); // Do what I mean, not what I say
+}
+
+int PWMAudio::read() {
+    return -1;
+}
+
+int PWMAudio::peek() {
+    return -1;
+}
+
+void PWMAudio::flush() {
+    if (_running) {
+        _arb->flush();
+    }
+}
+
+int PWMAudio::availableForWrite() {
+    if (!_running) {
+        return 0;
+    }
+    return _arb->available();
+}
+
+size_t PWMAudio::write(int16_t val, bool sync) {
+    if (!_running) {
+        return 0;
+    }
+    // Go from signed -32K...32K to unsigned 0...64K
+    uint32_t sample = (uint32_t) (val + 0x8000); 
+    // Adjust to the real range
+    sample *= _pwmScale;
+    sample >>= 16;
+    // Duplicate sample since we don't care which PWM channel
+    sample = (sample & 0xffff) | (sample << 16);
+    return _arb->write(sample, sync);
+}
+
+size_t PWMAudio::write(const uint8_t *buffer, size_t size) {
+    // We can only write 16-bit chunks here
+    if (size & 0x1) {
+        return 0;
+    }
+    size_t writtenSize = 0;
+    int16_t *p = (int16_t *)buffer;
+    while (size) {
+        if (!write((int16_t)*p)) {
+            // Blocked, stop write here
+            return writtenSize;
+        } else {
+            p++;
+            size -= 4;
+            writtenSize += 4;
+        }
+    }
+    return writtenSize;
+}

libraries/PWMAudio/src/PWMAudio.h

@@ -0,0 +1,80 @@
+/*
+    PWMAudio
+    Plays a signed 16b audio stream on a user defined pin using PWM
+
+    Copyright (c) 2022 Earle F. Philhower, III <earlephilhower@yahoo.com>
+
+    This library is free software; you can redistribute it and/or
+    modify it under the terms of the GNU Lesser General Public
+    License as published by the Free Software Foundation; either
+    version 2.1 of the License, or (at your option) any later version.
+
+    This library is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+    Lesser General Public License for more details.
+
+    You should have received a copy of the GNU Lesser General Public
+    License along with this library; if not, write to the Free Software
+    Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#pragma once
+#include <Arduino.h>
+#include "AudioBufferManager.h"
+
+class PWMAudio : public Stream {
+public:
+    PWMAudio(pin_size_t pin);
+    virtual ~PWMAudio();
+
+    bool setBuffers(size_t buffers, size_t bufferWords);
+    bool setFrequency(int newFreq);
+
+    bool begin(long sampleRate) {
+        setFrequency(sampleRate);
+        return begin();
+    }
+
+    bool begin();
+    void end();
+
+    // from Stream
+    virtual int available() override;
+    virtual int read() override;
+    virtual int peek() override;
+    virtual void flush() override;
+
+    // from Print (see notes on write() methods below)
+    virtual size_t write(const uint8_t *buffer, size_t size) override;
+    virtual int availableForWrite() override;
+
+    virtual size_t write(uint8_t x) override {
+        return write((int16_t) x, true);
+    }
+
+    // Write 16 bit value to port, user responsible for packing/alignment, etc.
+    size_t write(int16_t val, bool sync = true);
+    size_t write(int val, bool sync = true) {
+        return write((int16_t) val, sync);
+    }
+
+    // Note that these callback are called from **INTERRUPT CONTEXT** and hence
+    // should be in RAM, not FLASH, and should be quick to execute.
+    void onTransmit(void(*)(void));
+
+private:
+    pin_size_t _pin;
+    int _freq;
+
+    size_t _buffers;
+    size_t _bufferWords;
+
+    uint32_t _pwmScale;
+
+    bool _running;
+
+    void (*_cb)();
+
+    AudioBufferManager *_arb;
+};

libraries/PicoOTA/library.properties

@@ -5,6 +5,6 @@ maintainer=Earle F. Philhower, III <earlephilhower@yahoo.com>
 sentence=Configures requests for OTA bootloader
 paragraph=Example repository for Ethernet drivers
 category=Device Control
-url=https://github.com/earlephilhower.arduino-pico
+url=https://github.com/earlephilhower/arduino-pico
 architectures=rp2040
 dot_a_linkage=true

libraries/SingleFileDrive/examples/DataLoggerUSB/DataLoggerUSB.ino

@@ -0,0 +1,92 @@
+// Simple logger with USB upload to PC
+// Uses SingleFileDrive to export an onboard LittleFS file to the computer
+// The PC can open/copy the file, and then the user can delete it to restart
+
+// Released to the public domain,  2022 - Earle F. Philhower, III
+
+#include <SingleFileDrive.h>
+#include <LittleFS.h>
+
+uint32_t cnt = 0;
+bool okayToWrite = true;
+
+// Make the CSV file and give it a simple header
+void headerCSV() {
+  File f = LittleFS.open("data.csv", "w");
+  f.printf("sample,millis,temp,rand\n");
+  f.close();
+  cnt = 0;
+}
+
+// Called when the USB stick connected to a PC and the drive opened
+// Note this is from a USB IRQ so no printing to SerialUSB/etc.
+void plug(uint32_t i) {
+  (void) i;
+  okayToWrite = false;
+}
+
+// Called when the USB is ejected or removed from a PC
+// Note this is from a USB IRQ so no printing to SerialUSB/etc.
+void unplug(uint32_t i) {
+  (void) i;
+  okayToWrite = true;
+}
+
+// Called when the PC tries to delete the single file
+// Note this is from a USB IRQ so no printing to SerialUSB/etc.
+void deleteCSV(uint32_t i) {
+  (void) i;
+  LittleFS.remove("data.csv");
+  headerCSV();
+}
+
+void setup() {
+  Serial.begin();
+  delay(5000);
+
+  LittleFS.begin();
+
+  // Set up the USB disk share
+  singleFileDrive.onDelete(deleteCSV);
+  singleFileDrive.onPlug(plug);
+  singleFileDrive.onUnplug(unplug);
+  singleFileDrive.begin("data.csv", "Recorded data from the Raspberry Pi Pico.csv");
+
+  // Find the last written data
+  File f = LittleFS.open("data.csv", "r");
+  if (!f || !f.size()) {
+    cnt = 1;
+    headerCSV();
+  } else {
+    if (f.size() > 2048) {
+      f.seek(f.size() - 1024);
+    }
+    do {
+      String s = f.readStringUntil('\n');
+      sscanf(s.c_str(), "%lu,", &cnt);
+    } while (f.available());
+    f.close();
+    cnt++;
+  }
+
+  Serial.printf("Starting acquisition at %d\n", cnt);
+}
+
+void loop() {
+  float temp = analogReadTemp();
+  uint32_t hwrand = rp2040.hwrand32();
+  // Make sure the USB connect doesn't happen while we're writing!
+  noInterrupts();
+  if (okayToWrite) {
+    Serial.printf("Sampling...%lu\n", cnt);
+    // Don't want the USB to connect during an update!
+    File f = LittleFS.open("data.csv", "a");
+    if (f) {
+      f.printf("%lu,%lu,%f,%lu\n", cnt++, millis(), temp, hwrand);
+      f.close();
+    }
+  }
+  interrupts();
+
+  delay(10000);
+}

libraries/SingleFileDrive/keywords.txt

@@ -0,0 +1,22 @@
+#######################################
+# Syntax Coloring Map
+#######################################
+
+#######################################
+# Datatypes (KEYWORD1)
+#######################################
+
+SingleFileDrive	KEYWORD1
+
+#######################################
+# Methods and Functions (KEYWORD2)
+#######################################
+
+singleFileDrive KEYWORD1
+onDelete	KEYWORD1
+onPlug  KEYWORD1
+onUnplug        KEYWORD1
+
+#######################################
+# Constants (LITERAL1)
+#######################################

libraries/SingleFileDrive/library.properties

@@ -0,0 +1,10 @@
+name=SingleFileDrive
+version=1.0.0
+author=Earle F. Philhower, III <earlephilhower@yahoo.com>
+maintainer=Earle F. Philhower, III <earlephilhower@yahoo.com>
+sentence=Allows using USB MSC (USB stick) to transfer an onboard flash file to a PC
+paragraph=Emulates a USB stick and presents a single file for users to copy over/erase
+category=Device Control
+url=https://github.com/earlephilhower/arduino-pico
+architectures=rp2040
+dot_a_linkage=true

libraries/SingleFileDrive/src/SingleFileDrive.cpp

@@ -0,0 +1,396 @@
+/*
+    SingleFileDrive - Emulates a USB stick for easy data transfer
+    Copyright (c) 2022 Earle F. Philhower, III.  All rights reserved.
+
+    This library is free software; you can redistribute it and/or
+    modify it under the terms of the GNU Lesser General Public
+    License as published by the Free Software Foundation; either
+    version 2.1 of the License, or (at your option) any later version.
+
+    This library is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+    Lesser General Public License for more details.
+
+    You should have received a copy of the GNU Lesser General Public
+    License along with this library; if not, write to the Free Software
+    Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#include <SingleFileDrive.h>
+#include <LittleFS.h>
+#include <class/msc/msc.h>
+
+SingleFileDrive singleFileDrive;
+
+static const uint32_t _hddsize = (256 * 1024 * 1024); // 256MB
+static const uint32_t _hddsects = _hddsize / 512;
+
+// Ensure we are logged in to the USB framework
+void __USBInstallMassStorage() {
+    /* dummy */
+}
+
+SingleFileDrive::SingleFileDrive() {
+}
+
+SingleFileDrive::~SingleFileDrive() {
+    end();
+}
+
+void SingleFileDrive::onDelete(void (*cb)(uint32_t), uint32_t cbData) {
+    _cbDelete = cb;
+    _cbDeleteData = cbData;
+}
+
+void SingleFileDrive::onPlug(void (*cb)(uint32_t), uint32_t cbData) {
+    _cbPlug = cb;
+    _cbPlugData = cbData;
+}
+
+void SingleFileDrive::onUnplug(void (*cb)(uint32_t), uint32_t cbData) {
+    _cbUnplug = cb;
+    _cbUnplugData = cbData;
+}
+
+bool SingleFileDrive::begin(const char *localFile, const char *dosFile) {
+    if (_started) {
+        return false;
+    }
+    _localFile = strdup(localFile);
+    _dosFile = strdup(dosFile);
+    _started = true;
+    return true;
+}
+
+void SingleFileDrive::end() {
+    _started = false;
+    free(_localFile);
+    free(_dosFile);
+    _localFile = nullptr;
+    _dosFile = nullptr;
+}
+
+void SingleFileDrive::bootSector(char buff[512]) {
+    // 256MB FAT16 stolen from mkfs.fat
+    // dd if=/dev/zero of=/tmp/fat.bin bs=1M seek=255 count=1
+    // mkfs.fat -F 16 -r 16 -n PICODISK -i 12345678 -s 128 -m ':(' /tmp/fat.bin
+    const uint8_t hdr[] = {
+        0xeb, 0x3c, 0x90, 0x6d, 0x6b, 0x66, 0x73, 0x2e, 0x66, 0x61, 0x74, 0x00,
+        0x02, 0x80, 0x80, 0x00, 0x02, 0x00, 0x08, 0x00, 0x00, 0xf8, 0x80, 0x00,
+        0x20, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00,
+        0x80, 0x00, 0x29, 0x78, 0x56, 0x34, 0x12, 0x50, 0x49, 0x43, 0x4f, 0x44,
+        0x49, 0x53, 0x4b, 0x20, 0x20, 0x20, 0x46, 0x41, 0x54, 0x31, 0x36, 0x20,
+        0x20, 0x20, 0x0e, 0x1f, 0xbe, 0x5b, 0x7c, 0xac, 0x22, 0xc0, 0x74, 0x0b,
+        0x56, 0xb4, 0x0e, 0xbb, 0x07, 0x00, 0xcd, 0x10, 0x5e, 0xeb, 0xf0, 0x32,
+        0xe4, 0xcd, 0x16, 0xcd, 0x19, 0xeb, 0xfe, 0x3a, 0x28, 0x0d, 0x0a, 0x00
+    };
+    memset(buff, 0, 512);
+    memcpy(buff, hdr, sizeof(hdr));
+    buff[0x1fe] = 0x55;
+    buff[0x1ff] = 0xff;
+}
+
+static char _toLegalFATChar(char c) {
+    const char *odds = "!#$%&'()-@^_`{}~";
+    c = toupper(c);
+    if (((c >= '0') && (c <= '9')) || ((c >= 'A') && (c <= 'Z')) || strchr(odds, c)) {
+        return c;
+    } else {
+        return '~';
+    }
+}
+
+void SingleFileDrive::directorySector(char buff[512]) {
+    const uint8_t lbl[] = {
+        0x50, 0x49, 0x43, 0x4f, 0x44, 0x49, 0x53, 0x4b, 0x20, 0x20, 0x20, 0x08, 0x00, 0x00, 0xac, 0x56,
+        0x82, 0x55, 0x82, 0x55, 0x00, 0x00, 0xac, 0x56, 0x82, 0x55
+    }; //, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+    memset(buff, 0, 512);
+    memcpy(buff, lbl, sizeof(lbl));
+    buff += 32; // Skip the just-set label
+
+    // Create a legal 11-char UPPERCASE FILENAME WITH 0x20 PAD
+    char SFN[11];
+    memset(SFN, ' ', 11);
+    for (int i = 0; (i < 8) && _dosFile[i] && (_dosFile[i] != '.'); i++) {
+        SFN[i] = _toLegalFATChar(_dosFile[i]);
+    }
+    char *dot = _dosFile + strlen(_dosFile) - 1;
+    while ((dot >= _dosFile) && (*dot != '.')) {
+        dot--;
+    }
+    if (*dot == '.') {
+        dot++;
+        for (int i = 0; (i < 3) && dot[i]; i++) {
+            SFN[8 + i] = _toLegalFATChar(dot[i]);
+        }
+    }
+    uint8_t chksum = 0; // for LFN
+    for (int i = 0; i < 11; i++) {
+        chksum = (chksum >> 1) + (chksum << 7) + SFN[i];
+    }
+
+    // Create LFN structure
+    int entries = (strlen(_dosFile) + 12) / 13; // round up
+    for (int i = 0; i < entries; i++) {
+        *buff++ = (entries - i) | (i == 0 ? 0x40 : 0);
+        const char *partname = _dosFile + 13 * (entries - i - 1);
+        for (int j = 0; j < 13; j++) {
+            uint16_t u;
+            if (j > (int)strlen(partname)) {
+                u = 0xffff;
+            } else {
+                u = partname[j] & 0xff;
+            }
+            *buff++ = u & 0xff;
+            *buff++ = (u >> 8) & 0xff;
+            if (j == 4) {
+                *buff++ = 0x0f; // LFN ATTR
+                *buff++ = 0;
+                *buff++ = chksum;
+            } else if (j == 10) {
+                *buff++ = 0;
+                *buff++ = 0;
+            }
+        }
+    }
+
+    // Create SFN
+    memset(buff, 0, 32);
+    for (int i = 0; i < 11; i++) {
+        buff[i] = SFN[i];
+    }
+    buff[0x0b] = 0x20; // ATTR = Archive
+    // Ignore creation data/time, etc.
+    buff[0x1a] = 0x03; // Starting cluster 3
+    File f = LittleFS.open(_localFile, "r");
+    int size = f.size();
+    f.close();
+    buff[0x1c] = size & 255;
+    buff[0x1d] = (size >> 8) & 255;
+    buff[0x1e] = (size >> 16) & 255; // 16MB or smaller
+}
+
+void SingleFileDrive::fatSector(char fat[512]) {
+    memset(fat, 0, 512);
+    fat[0x00] = 0xff;
+    fat[0x01] = 0xf8;
+    fat[0x02] = 0xff;
+    fat[0x03] = 0xff;
+    int cluster = 3;
+    File f = LittleFS.open(_localFile, "r");
+    int size = f.size();
+    f.close();
+    while (size > 65536) {
+        fat[cluster * 2] = (cluster + 1) & 0xff;
+        fat[cluster * 2 + 1] = ((cluster + 1) >> 8) & 0xff;
+        cluster++;
+        size -= 65536;
+    }
+    fat[cluster * 2] = 0xff;
+    fat[cluster * 2 + 1] = 0xff;
+}
+
+// Invoked to determine max LUN
+extern "C" uint8_t tud_msc_get_maxlun_cb(void) {
+    return 1;
+}
+
+// Invoked when received SCSI_CMD_INQUIRY
+// Application fill vendor id, product id and revision with string up to 8, 16, 4 characters respectively
+extern "C" void tud_msc_inquiry_cb(uint8_t lun, uint8_t vendor_id[8], uint8_t product_id[16], uint8_t product_rev[4]) {
+    (void) lun;
+
+    const char vid[] = "PicoDisk";
+    const char pid[] = "Mass Storage";
+    const char rev[] = "1.0";
+
+    memcpy(vendor_id, vid, strlen(vid));
+    memcpy(product_id, pid, strlen(pid));
+    memcpy(product_rev, rev, strlen(rev));
+}
+
+bool SingleFileDrive::testUnitReady() {
+    return _started;
+}
+
+// Invoked when received Test Unit Ready command.
+// return true allowing host to read/write this LUN e.g SD card inserted
+extern "C" bool tud_msc_test_unit_ready_cb(uint8_t lun) {
+    (void) lun;
+
+    return singleFileDrive.testUnitReady();
+}
+
+// Invoked when received SCSI_CMD_READ_CAPACITY_10 and SCSI_CMD_READ_FORMAT_CAPACITY to determine the disk size
+// Application update block count and block size
+extern "C" void tud_msc_capacity_cb(uint8_t lun, uint32_t* block_count, uint16_t* block_size) {
+    (void) lun;
+    *block_count = _hddsects;
+    *block_size  = 512;
+}
+
+
+// Callback invoked when received READ10 command.
+// Copy disk's data to buffer (up to bufsize) and return number of copied bytes.
+extern "C" int32_t tud_msc_read10_cb(uint8_t lun, uint32_t lba, uint32_t offset, void* buffer, uint32_t bufsize) {
+    (void) lun;
+    return singleFileDrive.read10(lba, offset, buffer, bufsize);
+}
+
+int32_t SingleFileDrive::read10(uint32_t lba, uint32_t offset, void* buffer, uint32_t bufsize) {
+    if (!_started || (lba >= _hddsects)) {
+        return -1;
+    }
+
+    uint32_t toread = bufsize;
+    char buff[512];
+    uint8_t *curbuff = (uint8_t *)buffer;
+
+    while (bufsize > 0) {
+        if (lba == 0) {
+            bootSector(buff);
+        } else if ((lba == 128) || (lba == 256)) {
+            fatSector(buff);
+        } else if (lba == 384) {
+            directorySector(buff);
+        } else if (lba >= 640) {
+            File f = LittleFS.open(_localFile, "r");
+            f.seek((lba - 640) * 512);
+            f.read((uint8_t*)buff, 512);
+            f.close();
+        } else {
+            memset(buff, 0, sizeof(buff));
+        }
+
+        uint32_t cplen = 512 - offset;
+        if (bufsize < cplen) {
+            cplen = bufsize;
+        }
+        memcpy(curbuff, buff + offset, cplen);
+        curbuff += cplen;
+        offset = 0;
+        lba++;
+        bufsize -= cplen;
+    }
+
+    return toread;
+}
+
+extern "C" bool tud_msc_is_writable_cb(uint8_t lun) {
+    (void) lun;
+
+    return true;
+}
+
+// Callback invoked when received WRITE10 command.
+// Process data in buffer to disk's storage and return number of written bytes
+extern "C" int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t* buffer, uint32_t bufsize) {
+    (void) lun;
+    return singleFileDrive.write10(lba, offset, buffer, bufsize);
+}
+
+int32_t SingleFileDrive::write10(uint32_t lba, uint32_t offset, uint8_t* buffer, uint32_t bufsize) {
+    if (!_started || (lba >= _hddsects)) {
+        return -1;
+    }
+
+    uint32_t addr = lba * 512 + offset;
+    uint32_t hotspot = 384 * 512 + 0x20;
+    if ((addr > hotspot) || (addr + bufsize < hotspot)) {
+        // Did not try and erase the file entry, ignore
+        return bufsize;
+    }
+    int off = hotspot - addr;
+    uint8_t *ptr = (uint8_t *)buffer;
+    ptr += off;
+    if (*ptr == 0xe5) {
+        if (_cbDelete) {
+            _cbDelete(_cbDeleteData);
+        }
+    }
+
+    return bufsize;
+}
+
+extern "C" bool tud_msc_set_sense(uint8_t lun, uint8_t sense_key, uint8_t add_sense_code, uint8_t add_sense_qualifier);
+
+// Callback invoked when received an SCSI command not in built-in list below
+// - READ_CAPACITY10, READ_FORMAT_CAPACITY, INQUIRY, MODE_SENSE6, REQUEST_SENSE
+// - READ10 and WRITE10 has their own callbacks
+extern "C" int32_t tud_msc_scsi_cb(uint8_t lun, uint8_t const scsi_cmd[16], void* buffer, uint16_t bufsize) {
+    const int SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL = 0x1E;
+    const int SCSI_CMD_START_STOP_UNIT              = 0x1B;
+    const int SCSI_SENSE_ILLEGAL_REQUEST = 0x05;
+
+    void const* response = NULL;
+    int32_t resplen = 0;
+
+    // most scsi handled is input
+    bool in_xfer = true;
+    scsi_start_stop_unit_t const * start_stop = (scsi_start_stop_unit_t const *) scsi_cmd;
+    switch (scsi_cmd[0]) {
+    case SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL:
+        // Host is about to read/write etc ... better not to disconnect disk
+        if (scsi_cmd[4] & 1) {
+            singleFileDrive.plug();
+        }
+        resplen = 0;
+        break;
+    case SCSI_CMD_START_STOP_UNIT:
+        // Host try to eject/safe remove/poweroff us. We could safely disconnect with disk storage, or go into lower power
+        if (!start_stop->start && start_stop->load_eject) {
+            singleFileDrive.unplug();
+        } else if (start_stop->start && start_stop->load_eject) {
+            singleFileDrive.plug();
+        }
+        resplen = 0;
+        break;
+    default:
+        // Set Sense = Invalid Command Operation
+        tud_msc_set_sense(lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00);
+        // negative means error -> tinyusb could stall and/or response with failed status
+        resplen = -1;
+        break;
+    }
+
+    // return resplen must not larger than bufsize
+    if (resplen > bufsize) {
+        resplen = bufsize;
+    }
+
+    if (response && (resplen > 0)) {
+        if (in_xfer) {
+            memcpy(buffer, response, resplen);
+        } else {
+            // SCSI output
+        }
+    }
+
+    return resplen;
+}
+
+void SingleFileDrive::plug() {
+    if (_started && _cbPlug) {
+        _cbPlug(_cbPlugData);
+    }
+}
+
+void SingleFileDrive::unplug() {
+    if (_started && _cbUnplug) {
+        _cbUnplug(_cbUnplugData);
+    }
+}
+
+// Callback invoked on start/stop
+extern "C" bool tud_msc_start_stop_cb(uint8_t lun, uint8_t power_condition, bool start, bool load_eject) {
+    (void) lun;
+    (void) power_condition;
+    if (start && load_eject) {
+        singleFileDrive.plug();
+    } else if (!start && load_eject) {
+        singleFileDrive.unplug();
+    }
+    return true;
+}

libraries/SingleFileDrive/src/SingleFileDrive.h

@@ -0,0 +1,63 @@
+/*
+    SingleFileDrive - Emulates a USB stick for easy data transfer
+    Copyright (c) 2022 Earle F. Philhower, III.  All rights reserved.
+
+    This library is free software; you can redistribute it and/or
+    modify it under the terms of the GNU Lesser General Public
+    License as published by the Free Software Foundation; either
+    version 2.1 of the License, or (at your option) any later version.
+
+    This library is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+    Lesser General Public License for more details.
+
+    You should have received a copy of the GNU Lesser General Public
+    License along with this library; if not, write to the Free Software
+    Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#pragma once
+
+#include <Arduino.h>
+
+class SingleFileDrive {
+public:
+    SingleFileDrive();
+    ~SingleFileDrive();
+
+    bool begin(const char *localFile, const char *dosFile);
+    void end();
+
+    void onDelete(void (*cb)(uint32_t), uint32_t cbData = 0);
+    void onPlug(void (*cb)(uint32_t), uint32_t cbData = 0);
+    void onUnplug(void (*cb)(uint32_t), uint32_t cbData = 0);
+
+    // Only for internal TinyUSB callback use
+    bool testUnitReady();
+    int32_t read10(uint32_t lba, uint32_t offset, void* buffer, uint32_t bufsize);
+    int32_t write10(uint32_t lba, uint32_t offset, uint8_t* buffer, uint32_t bufsize);
+    void plug();;
+    void unplug();
+
+private:
+    void bootSector(char buff[512]);
+    void directorySector(char buff[512]);
+    void fatSector(char buff[512]);
+
+private:
+    bool _started = false;
+    char *_localFile = nullptr;
+    char *_dosFile = nullptr;
+
+    void (*_cbDelete)(uint32_t) = nullptr;
+    uint32_t _cbDeleteData = 0;
+
+    void (*_cbPlug)(uint32_t) = nullptr;
+    uint32_t _cbPlugData = 0;
+
+    void (*_cbUnplug)(uint32_t) = nullptr;
+    uint32_t _cbUnplugData = 0;
+};
+
+extern SingleFileDrive singleFileDrive;

libraries/WiFi/keywords.txt

@@ -57,7 +57,8 @@ beginEnterprise	KEYWORD2
 setHostname	KEYWORD2
 end	KEYWORD2
 getTime	KEYWORD2
-lowPowerMode	KEYWORD2
+aggressiveLowPowerMode	KEYWORD2
+defaultLowPowerMode	KEYWORD2
 noLowPowerMode	KEYWORD2
 ping	KEYWORD2
 beginMulticast	KEYWORD2

libraries/WiFi/src/WiFiClass.cpp

@@ -99,6 +99,7 @@ int WiFiClass::begin(const char* ssid, const char *passphrase) {
     if (!_wifi.begin()) {
         return WL_IDLE_STATUS;
     }
+    noLowPowerMode();
     // Enable CYW43 event debugging (make sure Debug Port is set)
     //cyw43_state.trace_flags = 0xffff;
     while (!_calledESP && ((millis() - start < (uint32_t)2 * _timeout)) && !connected()) {
@@ -134,6 +135,7 @@ uint8_t WiFiClass::beginAP(const char *ssid, const char* passphrase) {
     if (!_wifi.begin()) {
         return WL_IDLE_STATUS;
     }
+    noLowPowerMode();
     IPAddress gw = _wifi.gatewayIP();
     if (!gw.isSet()) {
         gw = IPAddress(192, 168, 42, 1);
@@ -565,14 +567,19 @@ unsigned long WiFiClass::getTime() {
     return millis();
 }
 
-void WiFiClass::lowPowerMode() {
+void WiFiClass::aggressiveLowPowerMode() {
     cyw43_wifi_pm(&cyw43_state, CYW43_AGGRESSIVE_PM);
 }
 
-void WiFiClass::noLowPowerMode() {
+void WiFiClass::defaultLowPowerMode() {
     cyw43_wifi_pm(&cyw43_state, CYW43_DEFAULT_PM);
 }
 
+// The difference between the default CYW43_DEFAULT_PM (0xA11142) and not low power (0xA11140) is that it changed from "Powersave mode on specified interface with High throughput" to "No Powersave mode". All other parameters stayed the same.
+void WiFiClass::noLowPowerMode() {
+    cyw43_wifi_pm(&cyw43_state, 0xA11140);
+}
+
 int WiFiClass::ping(const char* hostname, uint8_t ttl) {
     IPAddress ip;
     if (!hostByName(hostname, ip)) {

libraries/WiFi/src/WiFiClass.h

@@ -368,7 +368,8 @@ public:
 
     unsigned long getTime();
 
-    void lowPowerMode();
+    void aggressiveLowPowerMode();
+    void defaultLowPowerMode();
     void noLowPowerMode();
 
     int ping(const char* hostname, uint8_t ttl = 128);
@@ -381,7 +382,7 @@ public:
     void feedWatchdog();
 
 private:
-    int _timeout = 10000;
+    int _timeout = 15000;
     String _ssid;
     String _password;
     bool _wifiHWInitted = false;

libraries/WiFi/src/include/ClientContext.h

@@ -374,12 +374,22 @@ public:
             return 0;
         }
         size_t sent = 0;
+        uint8_t buff[256];
         while (stream.available()) {
-            char b;
-            b = stream.read();
-            if (write(&b, 1)) {
-                sent ++;
+            // Stream only lets you read 1 byte at a time, so buffer in local copy
+            size_t i;
+            for (i = 0; (i < sizeof(buff)) && stream.available(); i++) {
+                buff[i] = stream.read();
+            }
+            if (i) {
+                // Send as a single packet
+                int len = write((const char *)buff, i);
+                sent += len;
+                if (len != (int)i) {
+                    break; // Write error...
+                }
             } else {
+                // Out of data...
                 break;
             }
         }

libraries/Wire/src/Wire.cpp

@@ -140,23 +140,52 @@ void TwoWire::begin(uint8_t addr) {
     _running = true;
 }
 
+// See: https://github.com/earlephilhower/arduino-pico/issues/979#issuecomment-1328237128
+#pragma GCC push_options
+#pragma GCC optimize ("O0")
 void TwoWire::onIRQ() {
-    if (_i2c->hw->intr_stat & (1 << 12)) {
-        if (_onReceiveCallback && _buffLen) {
-            _onReceiveCallback(_buffLen);
-        }
-        _buffLen = 0;
-        _buffOff = 0;
-        _slaveStartDet = false;
-        _i2c->hw->clr_restart_det;
+    // Make a local copy of the IRQ status up front.  If it changes while we're
+    // running the IRQ callback will fire again after returning.  Avoids potential
+    // race conditions
+    uint32_t irqstat = _i2c->hw->intr_stat;
+    if (irqstat == 0) {
+        return;
     }
-    if (_i2c->hw->intr_stat & (1 << 10)) {
-        _buffLen = 0;
-        _buffOff = 0;
+
+    // First, pull off any data available
+    if (irqstat & (1 << 2)) {
+        // RX_FULL
+        if (_buffLen < (int)sizeof(_buff)) {
+            _buff[_buffLen++] = _i2c->hw->data_cmd & 0xff;
+        } else {
+            _i2c->hw->data_cmd;
+        }
+    }
+    // RD_REQ
+    if (irqstat & (1 << 5)) {
+        if (_onRequestCallback) {
+            _onRequestCallback();
+        }
+        _i2c->hw->clr_rd_req;
+    }
+    // TX_ABRT
+    if (irqstat & (1 << 6)) {
+        _i2c->hw->clr_tx_abrt;
+    }
+    // START_DET
+    if (irqstat & (1 << 10)) {
         _slaveStartDet = true;
         _i2c->hw->clr_start_det;
     }
-    if (_i2c->hw->intr_stat & (1 << 9)) {
+    // RESTART_DET
+    if (irqstat & (1 << 12)) {
+        if (_onReceiveCallback && _buffLen) {
+            _onReceiveCallback(_buffLen);
+        }
+        _i2c->hw->clr_restart_det;
+    }
+    // STOP_DET
+    if (irqstat & (1 << 9)) {
         if (_onReceiveCallback && _buffLen) {
             _onReceiveCallback(_buffLen);
         }
@@ -165,26 +194,8 @@ void TwoWire::onIRQ() {
         _slaveStartDet = false;
         _i2c->hw->clr_stop_det;
     }
-    if (_i2c->hw->intr_stat & (1 << 6)) {
-        // TX_ABRT
-        _i2c->hw->clr_tx_abrt;
-    }
-    if (_i2c->hw->intr_stat & (1 << 5)) {
-        // RD_REQ
-        if (_onRequestCallback) {
-            _onRequestCallback();
-        }
-        _i2c->hw->clr_rd_req;
-    }
-    if (_i2c->hw->intr_stat & (1 << 2)) {
-        // RX_FULL
-        if (_slaveStartDet && (_buffLen < (int)sizeof(_buff))) {
-            _buff[_buffLen++] = _i2c->hw->data_cmd & 0xff;
-        } else {
-            _i2c->hw->data_cmd;
-        }
-    }
 }
+#pragma GCC pop_options
 
 void TwoWire::end() {
     if (!_running) {

package.json

@@ -1,6 +1,6 @@
 {
   "name": "framework-arduinopico",
-  "version": "1.20603.0",
+  "version": "1.20700.0",
   "description": "Arduino Wiring-based Framework (RPi Pico RP2040)",
   "keywords": [
     "framework",

package/package_pico_index.template.json

@@ -26,6 +26,9 @@
                   {
                      "name": "Adafruit Feather RP2040"
                   },
+                  {
+                     "name": "Adafruit Feather RP2040 SCORPIO"
+                  },
                   {
                      "name": "Adafruit ItsyBitsy RP2040"
                   },
@@ -57,7 +60,7 @@
                      "name": "Cytron Maker Pi RP2040"
                   },
                   {
-                     "name": "Degz Mizu"
+                     "name": "DatanoiseTV PicoADK"
                   },
                   {
                      "name": "DeRuiLab FlyBoard2040Core"
@@ -104,6 +107,9 @@
                   {
                      "name": "Melopero Shake RP2040"
                   },
+                  {
+                     "name": "nullbits Bit-C PRO"
+                  },
                   {
                      "name": "Pimoroni PGA2040"
                   },
@@ -122,6 +128,27 @@
                   {
                      "name": "Seeed XIAO RP2040"
                   },
+                  {
+                     "name": "Viyalab Mizu RP2040"
+                  },
+                  {
+                     "name": "Waveshare RP2040 Zero"
+                  },
+                  {
+                     "name": "Waveshare RP2040 One"
+                  },
+                  {
+                     "name": "Waveshare RP2040 Plus 4MB"
+                  },
+                  {
+                     "name": "Waveshare RP2040 Plus 16MB"
+                  },
+                  {
+                     "name": "Waveshare RP2040 LCD 0.96"
+                  },
+                  {
+                     "name": "Waveshare RP2040 LCD 1.28"
+                  },
                   {
                      "name": "WIZnet W5100S-EVB-Pico"
                   },
@@ -138,22 +165,22 @@
                "toolsDependencies": [
                   {
                      "packager": "rp2040",
-                     "version": "1.4.0-c-0196c06",
+                     "version": "1.5.0-a-5007782",
                      "name": "pqt-gcc"
                   },
                   {
                      "packager": "rp2040",
-                     "version": "1.4.0-c-0196c06",
+                     "version": "1.5.0-a-5007782",
                      "name": "pqt-mklittlefs"
                   },
                   {
                      "packager": "rp2040",
-                     "version": "1.4.0-c-0196c06",
+                     "version": "1.5.0-a-5007782",
                      "name": "pqt-elf2uf2"
                   },
                   {
                      "packager": "rp2040",
-                     "version": "1.4.0-c-0196c06",
+                     "version": "1.5.0-a-5007782",
                      "name": "pqt-pioasm"
                   },
                   {
@@ -163,7 +190,7 @@
                   },
                   {
                      "packager": "rp2040",
-                     "version": "1.4.0-c-0196c06",
+                     "version": "1.5.0-a-5007782",
                      "name": "pqt-openocd"
                   }
                ],
@@ -174,57 +201,57 @@
          ],
          "tools": [
             {
-               "version": "1.4.0-c-0196c06",
+               "version": "1.5.0-a-5007782",
                "name": "pqt-openocd",
                "systems": [
                   {
                      "host": "aarch64-linux-gnu",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.4.0-c/aarch64-linux-gnu.openocd-e3428fadb.220714.tar.gz",
-                     "archiveFileName": "aarch64-linux-gnu.openocd-e3428fadb.220714.tar.gz",
-                     "checksum": "SHA-256:8da4fd922fd7392e87c0057b193e67962606cd13450af935c9846992f2bce916",
-                     "size": "5607131"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.5.0-a/aarch64-linux-gnu.openocd-228ede43d.221223.tar.gz",
+                     "archiveFileName": "aarch64-linux-gnu.openocd-228ede43d.221223.tar.gz",
+                     "checksum": "SHA-256:aa3f7a24af6afca5bacd9172f943f59d1f7ca9a3525e7e9c445dba9f8c6c8b68",
+                     "size": "5807317"
                   },
                   {
                      "host": "arm-linux-gnueabihf",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.4.0-c/arm-linux-gnueabihf.openocd-e3428fadb.220714.tar.gz",
-                     "archiveFileName": "arm-linux-gnueabihf.openocd-e3428fadb.220714.tar.gz",
-                     "checksum": "SHA-256:ce7650961c8200fe2cc2d4a88efc952fe1bb7b4175f2cf650a9a7d992ae08298",
-                     "size": "5344149"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.5.0-a/arm-linux-gnueabihf.openocd-228ede43d.221223.tar.gz",
+                     "archiveFileName": "arm-linux-gnueabihf.openocd-228ede43d.221223.tar.gz",
+                     "checksum": "SHA-256:40a623e198eccafaec210e3f1b425369e6fe79cef0d94b7a910d63223c37cc50",
+                     "size": "5538300"
                   },
                   {
                      "host": "i686-pc-linux-gnu",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.4.0-c/i686-linux-gnu.openocd-e3428fadb.220714.tar.gz",
-                     "archiveFileName": "i686-linux-gnu.openocd-e3428fadb.220714.tar.gz",
-                     "checksum": "SHA-256:9391ae74c6474f685f45ccefb82e18f382f1a59f3e13e2b22fe00967264d2482",
-                     "size": "5168334"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.5.0-a/i686-linux-gnu.openocd-228ede43d.221223.tar.gz",
+                     "archiveFileName": "i686-linux-gnu.openocd-228ede43d.221223.tar.gz",
+                     "checksum": "SHA-256:b80eb819e302130bde5ed303f23645e615bc2440303223d924742ee89dc6d477",
+                     "size": "5341706"
                   },
                   {
                      "host": "i686-mingw32",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.4.0-c/i686-w64-mingw32.openocd-e3428fadb.220714.zip",
-                     "archiveFileName": "i686-w64-mingw32.openocd-e3428fadb.220714.zip",
-                     "checksum": "SHA-256:f4b7803527a0a587fe95e52bcf056fcbe58d64b78705edd38810655d3abee1fe",
-                     "size": "2156831"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.5.0-a/i686-w64-mingw32.openocd-228ede43d.221223.zip",
+                     "archiveFileName": "i686-w64-mingw32.openocd-228ede43d.221223.zip",
+                     "checksum": "SHA-256:02d9fba9d4e66de31cd99af0ade3a6150d258d034aa5f85f7f4601c849b8bc80",
+                     "size": "2207879"
                   },
                   {
                      "host": "x86_64-apple-darwin",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.4.0-c/x86_64-apple-darwin14.openocd-e3428fadb.220714.tar.gz",
-                     "archiveFileName": "x86_64-apple-darwin14.openocd-e3428fadb.220714.tar.gz",
-                     "checksum": "SHA-256:4e6a8da43758941478e6740e023ea5be051f09bf92e49d65c2b54a1ca4a2660c",
-                     "size": "2002508"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.5.0-a/x86_64-apple-darwin14.openocd-228ede43d.221223.tar.gz",
+                     "archiveFileName": "x86_64-apple-darwin14.openocd-228ede43d.221223.tar.gz",
+                     "checksum": "SHA-256:f92b87bd2ec81260c4c76e9e74ede41888d943ac0a97c11ec5f579d450ba72b1",
+                     "size": "2599689"
                   },
                   {
                      "host": "x86_64-pc-linux-gnu",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.4.0-c/x86_64-linux-gnu.openocd-e3428fadb.220714.tar.gz",
-                     "archiveFileName": "x86_64-linux-gnu.openocd-e3428fadb.220714.tar.gz",
-                     "checksum": "SHA-256:2518c6451c0e4c148c8c6cb9330e216075177003b064c509b168f42a44a6eb5a",
-                     "size": "5540574"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.5.0-a/x86_64-linux-gnu.openocd-228ede43d.221223.tar.gz",
+                     "archiveFileName": "x86_64-linux-gnu.openocd-228ede43d.221223.tar.gz",
+                     "checksum": "SHA-256:cf4c30151c9f4583964579f11ffbc66229508b21d83d2f1d7c87eb28d1f0cca9",
+                     "size": "5727971"
                   },
                   {
                      "host": "x86_64-mingw32",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.4.0-c/x86_64-w64-mingw32.openocd-e3428fadb.220714.zip",
-                     "archiveFileName": "x86_64-w64-mingw32.openocd-e3428fadb.220714.zip",
-                     "checksum": "SHA-256:c2da993d74152ec8ca80b350ede77ee94942518081a48dafd7a3b49631778e75",
-                     "size": "2156831"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.5.0-a/x86_64-w64-mingw32.openocd-228ede43d.221223.zip",
+                     "archiveFileName": "x86_64-w64-mingw32.openocd-228ede43d.221223.zip",
+                     "checksum": "SHA-256:5f0c4f67f0bba6cf3b9968ba27796fe98ef8787e56f0a160dede8d05d578586c",
+                     "size": "2168940"
                   }
                ]
             },
@@ -291,222 +318,222 @@
                ]
             },
             {
-               "version": "1.4.0-c-0196c06",
+               "version": "1.5.0-a-5007782",
                "name": "pqt-gcc",
                "systems": [
                   {
                      "host": "aarch64-linux-gnu",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.4.0-c/aarch64-linux-gnu.arm-none-eabi-0196c06.220714.tar.gz",
-                     "archiveFileName": "aarch64-linux-gnu.arm-none-eabi-0196c06.220714.tar.gz",
-                     "checksum": "SHA-256:0bc906c2eb4b3999285ea8a71ec0c95a20a21f2ff46b1bdd264f2fd3c30fe580",
-                     "size": "77889379"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.5.0-a/aarch64-linux-gnu.arm-none-eabi-5007782.221223.tar.gz",
+                     "archiveFileName": "aarch64-linux-gnu.arm-none-eabi-5007782.221223.tar.gz",
+                     "checksum": "SHA-256:baff843fce38393565babf81ecfddfab17df8046d901faad3c5f93ee072d395b",
+                     "size": "81474410"
                   },
                   {
                      "host": "arm-linux-gnueabihf",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.4.0-c/arm-linux-gnueabihf.arm-none-eabi-0196c06.220714.tar.gz",
-                     "archiveFileName": "arm-linux-gnueabihf.arm-none-eabi-0196c06.220714.tar.gz",
-                     "checksum": "SHA-256:2bf9f691d1fa97cea3b835a364fc24d06102181725001a00fe3e77526f90e2bd",
-                     "size": "73342377"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.5.0-a/arm-linux-gnueabihf.arm-none-eabi-5007782.221223.tar.gz",
+                     "archiveFileName": "arm-linux-gnueabihf.arm-none-eabi-5007782.221223.tar.gz",
+                     "checksum": "SHA-256:35144f4aded62ab45ab7ddabf63c189af70b57534438cf00281c11b5ef90d316",
+                     "size": "76138344"
                   },
                   {
                      "host": "i686-pc-linux-gnu",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.4.0-c/i686-linux-gnu.arm-none-eabi-0196c06.220714.tar.gz",
-                     "archiveFileName": "i686-linux-gnu.arm-none-eabi-0196c06.220714.tar.gz",
-                     "checksum": "SHA-256:e0fe347f2602247ffbc16bb7b74653fdb78c4f75b90037f2e82fc5498b5d1cb9",
-                     "size": "79511866"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.5.0-a/i686-linux-gnu.arm-none-eabi-5007782.221223.tar.gz",
+                     "archiveFileName": "i686-linux-gnu.arm-none-eabi-5007782.221223.tar.gz",
+                     "checksum": "SHA-256:d1d5121c4a5e4fa42047daf58c112a90beeb3533d1f133f4928db4b337030351",
+                     "size": "83712710"
                   },
                   {
                      "host": "i686-mingw32",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.4.0-c/i686-w64-mingw32.arm-none-eabi-0196c06.220714.zip",
-                     "archiveFileName": "i686-w64-mingw32.arm-none-eabi-0196c06.220714.zip",
-                     "checksum": "SHA-256:d1ee0f00c97dc50dc06487d6fb6b5dd94bbb3cf1579c975bcd23d7a7922e53b7",
-                     "size": "82626868"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.5.0-a/i686-w64-mingw32.arm-none-eabi-5007782.221223.zip",
+                     "archiveFileName": "i686-w64-mingw32.arm-none-eabi-5007782.221223.zip",
+                     "checksum": "SHA-256:71e0858689b644e5b0aaa07ec5257919ab292ff9404bfc9c52dc31593828f391",
+                     "size": "85628083"
                   },
                   {
                      "host": "x86_64-apple-darwin",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.4.0-c/x86_64-apple-darwin14.arm-none-eabi-0196c06.220714.tar.gz",
-                     "archiveFileName": "x86_64-apple-darwin14.arm-none-eabi-0196c06.220714.tar.gz",
-                     "checksum": "SHA-256:1b030451a5a6ddf42ac796c46b2f077f90f6d56586f4537a3486ce47670996cd",
-                     "size": "82119254"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.5.0-a/x86_64-apple-darwin14.arm-none-eabi-5007782.221223.tar.gz",
+                     "archiveFileName": "x86_64-apple-darwin14.arm-none-eabi-5007782.221223.tar.gz",
+                     "checksum": "SHA-256:ad984927785d17ddd34cfc7bc76d4d1371d6f6905d8708d3535a261b244b32d9",
+                     "size": "84968911"
                   },
                   {
                      "host": "x86_64-pc-linux-gnu",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.4.0-c/x86_64-linux-gnu.arm-none-eabi-0196c06.220714.tar.gz",
-                     "archiveFileName": "x86_64-linux-gnu.arm-none-eabi-0196c06.220714.tar.gz",
-                     "checksum": "SHA-256:73d032ba42d33f6e9c1d5de79b73bf5e9740b8e6b7fee37de3db03814c553694",
-                     "size": "80363125"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.5.0-a/x86_64-linux-gnu.arm-none-eabi-5007782.221223.tar.gz",
+                     "archiveFileName": "x86_64-linux-gnu.arm-none-eabi-5007782.221223.tar.gz",
+                     "checksum": "SHA-256:591af0c27b08b31d11b3135a56bbd3c447cd9e6cac2987cdb3ab25a86d7eb3e3",
+                     "size": "83660106"
                   },
                   {
                      "host": "x86_64-mingw32",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.4.0-c/x86_64-w64-mingw32.arm-none-eabi-0196c06.220714.zip",
-                     "archiveFileName": "x86_64-w64-mingw32.arm-none-eabi-0196c06.220714.zip",
-                     "checksum": "SHA-256:3f67e15adbe49ebaee72734e9d469bd6b34fd1be30ccdb6e55a1e05a0be4e1db",
-                     "size": "86064664"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.5.0-a/x86_64-w64-mingw32.arm-none-eabi-5007782.221223.zip",
+                     "archiveFileName": "x86_64-w64-mingw32.arm-none-eabi-5007782.221223.zip",
+                     "checksum": "SHA-256:f2cf872ce5bd07efa2cfa044de28458034be9466f5ccae4e7e9cd229aabefa11",
+                     "size": "88351413"
                   }
                ]
             },
             {
-               "version": "1.4.0-c-0196c06",
+               "version": "1.5.0-a-5007782",
                "name": "pqt-elf2uf2",
                "systems": [
                   {
                      "host": "aarch64-linux-gnu",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.4.0-c/aarch64-linux-gnu.elf2uf2-2e6142b.220714.tar.gz",
-                     "archiveFileName": "aarch64-linux-gnu.elf2uf2-2e6142b.220714.tar.gz",
-                     "checksum": "SHA-256:14d7c1be08151bcddcc19fdb5741bf52b435f08f52daff2d498a07c5ebfb5bfb",
-                     "size": "82682"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.5.0-a/aarch64-linux-gnu.elf2uf2-2e6142b.221223.tar.gz",
+                     "archiveFileName": "aarch64-linux-gnu.elf2uf2-2e6142b.221223.tar.gz",
+                     "checksum": "SHA-256:266151dc2523ec707b88256e7220a5e89c819ad1e134a7f492cf9fbe07ccf8a1",
+                     "size": "82684"
                   },
                   {
                      "host": "arm-linux-gnueabihf",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.4.0-c/arm-linux-gnueabihf.elf2uf2-2e6142b.220714.tar.gz",
-                     "archiveFileName": "arm-linux-gnueabihf.elf2uf2-2e6142b.220714.tar.gz",
-                     "checksum": "SHA-256:31b790b5a19bbb5950212098aa42be43702fb4db50aa541c9f40b2320e2280be",
-                     "size": "55991"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.5.0-a/arm-linux-gnueabihf.elf2uf2-2e6142b.221223.tar.gz",
+                     "archiveFileName": "arm-linux-gnueabihf.elf2uf2-2e6142b.221223.tar.gz",
+                     "checksum": "SHA-256:e30f1243259361a635a21d69e81bf2d913e194882159eba8c652d5b45cf2591b",
+                     "size": "55998"
                   },
                   {
                      "host": "i686-pc-linux-gnu",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.4.0-c/i686-linux-gnu.elf2uf2-2e6142b.220714.tar.gz",
-                     "archiveFileName": "i686-linux-gnu.elf2uf2-2e6142b.220714.tar.gz",
-                     "checksum": "SHA-256:a3dd93861857fd81f8c9ed01509a0af012f446f23f405bc696f6a4d2f344262c",
-                     "size": "91386"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.5.0-a/i686-linux-gnu.elf2uf2-2e6142b.221223.tar.gz",
+                     "archiveFileName": "i686-linux-gnu.elf2uf2-2e6142b.221223.tar.gz",
+                     "checksum": "SHA-256:17ebb211916bc74a9cd3263f6d5e9721bb91d54a836c4369c1e01e9147e4f477",
+                     "size": "91387"
                   },
                   {
                      "host": "i686-mingw32",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.4.0-c/i686-w64-mingw32.elf2uf2-2e6142b.220714.zip",
-                     "archiveFileName": "i686-w64-mingw32.elf2uf2-2e6142b.220714.zip",
-                     "checksum": "SHA-256:25d6a934643074590c3006468ec051f62d02298abbff27d7e3643ee147e818e0",
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.5.0-a/i686-w64-mingw32.elf2uf2-2e6142b.221223.zip",
+                     "archiveFileName": "i686-w64-mingw32.elf2uf2-2e6142b.221223.zip",
+                     "checksum": "SHA-256:80f740ffdb0a1812212f631598060216361b1a8e55d2092e729afee3b3b1ad95",
                      "size": "71949"
                   },
                   {
                      "host": "x86_64-apple-darwin",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.4.0-c/x86_64-apple-darwin14.elf2uf2-2e6142b.220714.tar.gz",
-                     "archiveFileName": "x86_64-apple-darwin14.elf2uf2-2e6142b.220714.tar.gz",
-                     "checksum": "SHA-256:f2743d086d1992599d656aaa9a38a736d443bdc96619fd5bcabdc7fcb05225c8",
-                     "size": "86600"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.5.0-a/x86_64-apple-darwin14.elf2uf2-2e6142b.221223.tar.gz",
+                     "archiveFileName": "x86_64-apple-darwin14.elf2uf2-2e6142b.221223.tar.gz",
+                     "checksum": "SHA-256:bebf3f984c59b36cfdc1a5b41bc3368c674c03eea54586419872c0ce2ad71430",
+                     "size": "86604"
                   },
                   {
                      "host": "x86_64-pc-linux-gnu",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.4.0-c/x86_64-linux-gnu.elf2uf2-2e6142b.220714.tar.gz",
-                     "archiveFileName": "x86_64-linux-gnu.elf2uf2-2e6142b.220714.tar.gz",
-                     "checksum": "SHA-256:5b0e79bfd9d7e5f4d5e5cb0e6e2b685e10fdf3071139c00bf6274a5ca9b9717e",
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.5.0-a/x86_64-linux-gnu.elf2uf2-2e6142b.221223.tar.gz",
+                     "archiveFileName": "x86_64-linux-gnu.elf2uf2-2e6142b.221223.tar.gz",
+                     "checksum": "SHA-256:d7d0e77a8b4c5cf879bb92d20bbfb213d568fec86fb96fc08c60bd9a3fb38712",
                      "size": "82339"
                   },
                   {
                      "host": "x86_64-mingw32",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.4.0-c/x86_64-w64-mingw32.elf2uf2-2e6142b.220714.zip",
-                     "archiveFileName": "x86_64-w64-mingw32.elf2uf2-2e6142b.220714.zip",
-                     "checksum": "SHA-256:f09e022cbb1fe73315ccf16a2af6bc687b64d0c44066f801fb9dee8326e941b1",
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.5.0-a/x86_64-w64-mingw32.elf2uf2-2e6142b.221223.zip",
+                     "archiveFileName": "x86_64-w64-mingw32.elf2uf2-2e6142b.221223.zip",
+                     "checksum": "SHA-256:25840973640fd28817a37a4213dfbad81da91a7b75a1ecb14cdee56c2bd1a8ee",
                      "size": "80399"
                   }
                ]
             },
             {
-               "version": "1.4.0-c-0196c06",
+               "version": "1.5.0-a-5007782",
                "name": "pqt-pioasm",
                "systems": [
                   {
                      "host": "aarch64-linux-gnu",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.4.0-c/aarch64-linux-gnu.pioasm-2e6142b.220714.tar.gz",
-                     "archiveFileName": "aarch64-linux-gnu.pioasm-2e6142b.220714.tar.gz",
-                     "checksum": "SHA-256:d4ac4b39841984178babd75f5c09cad87e06bd2fb18cf04e40f561d72e604a5d",
-                     "size": "453440"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.5.0-a/aarch64-linux-gnu.pioasm-2e6142b.221223.tar.gz",
+                     "archiveFileName": "aarch64-linux-gnu.pioasm-2e6142b.221223.tar.gz",
+                     "checksum": "SHA-256:38ae80646805781c1df2264ae6b8ff41cc0dbfcefd4dfaae9f5e355bce4890c7",
+                     "size": "453442"
                   },
                   {
                      "host": "arm-linux-gnueabihf",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.4.0-c/arm-linux-gnueabihf.pioasm-2e6142b.220714.tar.gz",
-                     "archiveFileName": "arm-linux-gnueabihf.pioasm-2e6142b.220714.tar.gz",
-                     "checksum": "SHA-256:568ebdd7b1a47c6dbf45793f9bf019855a1b14182fbeb7ed7e342979c6632eef",
-                     "size": "360675"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.5.0-a/arm-linux-gnueabihf.pioasm-2e6142b.221223.tar.gz",
+                     "archiveFileName": "arm-linux-gnueabihf.pioasm-2e6142b.221223.tar.gz",
+                     "checksum": "SHA-256:3ab67c8b0f40806e8e2a53fe22b274f3b79ccc12189ab80dc2db3b4e80e34de2",
+                     "size": "360686"
                   },
                   {
                      "host": "i686-pc-linux-gnu",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.4.0-c/i686-linux-gnu.pioasm-2e6142b.220714.tar.gz",
-                     "archiveFileName": "i686-linux-gnu.pioasm-2e6142b.220714.tar.gz",
-                     "checksum": "SHA-256:2abac2bef690f7ffadfcf74af4832bfcc0e212606efbed21b385bda0517554ef",
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.5.0-a/i686-linux-gnu.pioasm-2e6142b.221223.tar.gz",
+                     "archiveFileName": "i686-linux-gnu.pioasm-2e6142b.221223.tar.gz",
+                     "checksum": "SHA-256:ed5d190b3726caa58a63b08785aff17f6f412810cc7bef21405a6342717e6c6b",
                      "size": "511442"
                   },
                   {
                      "host": "i686-mingw32",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.4.0-c/i686-w64-mingw32.pioasm-2e6142b.220714.zip",
-                     "archiveFileName": "i686-w64-mingw32.pioasm-2e6142b.220714.zip",
-                     "checksum": "SHA-256:0b1336b999a31d164248248d37fa550aa14a06dae8ef5b215818c5f0597ca80b",
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.5.0-a/i686-w64-mingw32.pioasm-2e6142b.221223.zip",
+                     "archiveFileName": "i686-w64-mingw32.pioasm-2e6142b.221223.zip",
+                     "checksum": "SHA-256:713be116f8fbdd7a77ae294f2b8a72fcfcb0bd43f013124bde6e569dd284ad43",
                      "size": "385882"
                   },
                   {
                      "host": "x86_64-apple-darwin",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.4.0-c/x86_64-apple-darwin14.pioasm-2e6142b.220714.tar.gz",
-                     "archiveFileName": "x86_64-apple-darwin14.pioasm-2e6142b.220714.tar.gz",
-                     "checksum": "SHA-256:7057ba222a54ff9bd43a6a4232a6355100f29e0cc20d3facb5d600180f418e68",
-                     "size": "480538"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.5.0-a/x86_64-apple-darwin14.pioasm-2e6142b.221223.tar.gz",
+                     "archiveFileName": "x86_64-apple-darwin14.pioasm-2e6142b.221223.tar.gz",
+                     "checksum": "SHA-256:16feb332e66b8ed7f911eceb153484565d1947a87eb7c9db774bd38a9a7b0043",
+                     "size": "480539"
                   },
                   {
                      "host": "x86_64-pc-linux-gnu",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.4.0-c/x86_64-linux-gnu.pioasm-2e6142b.220714.tar.gz",
-                     "archiveFileName": "x86_64-linux-gnu.pioasm-2e6142b.220714.tar.gz",
-                     "checksum": "SHA-256:30b367e8d2cd4ccdf151e728b4137bad1d993c42f0d640307e27d5fc55fce2c0",
-                     "size": "458691"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.5.0-a/x86_64-linux-gnu.pioasm-2e6142b.221223.tar.gz",
+                     "archiveFileName": "x86_64-linux-gnu.pioasm-2e6142b.221223.tar.gz",
+                     "checksum": "SHA-256:367b14d59bb5394c068bacd1ab3dfd77116208ad28213af01372d5a93bb0ead3",
+                     "size": "458693"
                   },
                   {
                      "host": "x86_64-mingw32",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.4.0-c/x86_64-w64-mingw32.pioasm-2e6142b.220714.zip",
-                     "archiveFileName": "x86_64-w64-mingw32.pioasm-2e6142b.220714.zip",
-                     "checksum": "SHA-256:b7b340862e673f9e57287f02219b2d56094a497fe9d8c451acf28aaef721e038",
-                     "size": "409101"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.5.0-a/x86_64-w64-mingw32.pioasm-2e6142b.221223.zip",
+                     "archiveFileName": "x86_64-w64-mingw32.pioasm-2e6142b.221223.zip",
+                     "checksum": "SHA-256:c18d5499308c4938b1c2230724f3adb2de8071583b9185b77705747555c9a50f",
+                     "size": "409100"
                   }
                ]
             },
             {
-               "version": "1.4.0-c-0196c06",
+               "version": "1.5.0-a-5007782",
                "name": "pqt-mklittlefs",
                "systems": [
                   {
                      "host": "aarch64-linux-gnu",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.4.0-c/aarch64-linux-gnu.mklittlefs-affa497.220714.tar.gz",
-                     "archiveFileName": "aarch64-linux-gnu.mklittlefs-affa497.220714.tar.gz",
-                     "checksum": "SHA-256:ad0af70d568e10a9a2a74c6e0a3cf8659a47b80fbf594b01731579bc21a5c212",
-                     "size": "47287"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.5.0-a/aarch64-linux-gnu.mklittlefs-30b7fc1.221223.tar.gz",
+                     "archiveFileName": "aarch64-linux-gnu.mklittlefs-30b7fc1.221223.tar.gz",
+                     "checksum": "SHA-256:6e20ef3f0c8f4eedd18377cd8e7626a724b3c11ce914e66e23fe021493b519b6",
+                     "size": "60993"
                   },
                   {
                      "host": "arm-linux-gnueabihf",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.4.0-c/arm-linux-gnueabihf.mklittlefs-affa497.220714.tar.gz",
-                     "archiveFileName": "arm-linux-gnueabihf.mklittlefs-affa497.220714.tar.gz",
-                     "checksum": "SHA-256:f8f1a1dd7b02220f11cf0f6a6c88692f7e056eb245fbc41017c33d333751980e",
-                     "size": "40826"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.5.0-a/arm-linux-gnueabihf.mklittlefs-30b7fc1.221223.tar.gz",
+                     "archiveFileName": "arm-linux-gnueabihf.mklittlefs-30b7fc1.221223.tar.gz",
+                     "checksum": "SHA-256:092501f939d78625f876644a5c1d3264f2310e1798ea6d12a2845274a50a0b54",
+                     "size": "51573"
                   },
                   {
                      "host": "i686-pc-linux-gnu",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.4.0-c/i686-linux-gnu.mklittlefs-affa497.220714.tar.gz",
-                     "archiveFileName": "i686-linux-gnu.mklittlefs-affa497.220714.tar.gz",
-                     "checksum": "SHA-256:4d10a2bc6a8fa41a7e5642aa30128f797f84b099e1bb2282c6c2d62a06e81e21",
-                     "size": "50925"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.5.0-a/i686-linux-gnu.mklittlefs-30b7fc1.221223.tar.gz",
+                     "archiveFileName": "i686-linux-gnu.mklittlefs-30b7fc1.221223.tar.gz",
+                     "checksum": "SHA-256:c2d8b5d8c903b024ae88bd5a97d9759049fbc1e7ab84ea19ea6ea2546f0aa496",
+                     "size": "67720"
                   },
                   {
                      "host": "i686-mingw32",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.4.0-c/i686-w64-mingw32.mklittlefs-affa497.220714.zip",
-                     "archiveFileName": "i686-w64-mingw32.mklittlefs-affa497.220714.zip",
-                     "checksum": "SHA-256:71117412351ea2486848848d76f4d1e3c7a507a4d7546f6b0646bbc10c96d557",
-                     "size": "334062"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.5.0-a/i686-w64-mingw32.mklittlefs-30b7fc1.221223.zip",
+                     "archiveFileName": "i686-w64-mingw32.mklittlefs-30b7fc1.221223.zip",
+                     "checksum": "SHA-256:9f66d5b6bdfce13b1c246ae2d8abfcab623828337a16a1f2571eeed1b71096b9",
+                     "size": "345497"
                   },
                   {
                      "host": "x86_64-apple-darwin",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.4.0-c/x86_64-apple-darwin14.mklittlefs-affa497.220714.tar.gz",
-                     "archiveFileName": "x86_64-apple-darwin14.mklittlefs-affa497.220714.tar.gz",
-                     "checksum": "SHA-256:b3d0c30f942982337cd4c0e4f70855f8eabcf1d378eac78465c7fee39ab5915f",
-                     "size": "365780"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.5.0-a/x86_64-apple-darwin14.mklittlefs-30b7fc1.221223.tar.gz",
+                     "archiveFileName": "x86_64-apple-darwin14.mklittlefs-30b7fc1.221223.tar.gz",
+                     "checksum": "SHA-256:1f7e675700ff4b5de21d1ea37a0969683ad54685d94bf0b42de13c26aa42f13f",
+                     "size": "377123"
                   },
                   {
                      "host": "x86_64-pc-linux-gnu",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.4.0-c/x86_64-linux-gnu.mklittlefs-affa497.220714.tar.gz",
-                     "archiveFileName": "x86_64-linux-gnu.mklittlefs-affa497.220714.tar.gz",
-                     "checksum": "SHA-256:9241e8e642748048bd32c7ccf4a8200e8bc104d6e328fe7437e8727866f29d94",
-                     "size": "49787"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.5.0-a/x86_64-linux-gnu.mklittlefs-30b7fc1.221223.tar.gz",
+                     "archiveFileName": "x86_64-linux-gnu.mklittlefs-30b7fc1.221223.tar.gz",
+                     "checksum": "SHA-256:2773b0e7a5af33052b84959893cd9e7f3223236730f2109546399ec52d6a7a70",
+                     "size": "62741"
                   },
                   {
                      "host": "x86_64-mingw32",
-                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.4.0-c/x86_64-w64-mingw32.mklittlefs-affa497.220714.zip",
-                     "archiveFileName": "x86_64-w64-mingw32.mklittlefs-affa497.220714.zip",
-                     "checksum": "SHA-256:2f39dd727e9cb61dbc631d00f543a99b6224fb24ffde0dff0cb2b70c9561ae69",
-                     "size": "347612"
+                     "url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.5.0-a/x86_64-w64-mingw32.mklittlefs-30b7fc1.221223.zip",
+                     "archiveFileName": "x86_64-w64-mingw32.mklittlefs-30b7fc1.221223.zip",
+                     "checksum": "SHA-256:ee9a6caad229cd9530465926c755a4dc68a89bd5a6ff642c060dfa05f0c01a2a",
+                     "size": "357313"
                   }
                ]
             }

platform.txt

@@ -20,7 +20,7 @@
 # https://github.com/arduino/Arduino/wiki/Arduino-IDE-1.5---3rd-party-Hardware-specification
 
 name=Raspberry Pi RP2040 Boards
-version=2.6.3
+version=2.7.0
 
 runtime.tools.pqt-gcc.path={runtime.platform.path}/system/arm-none-eabi
 runtime.tools.pqt-python3.path={runtime.platform.path}/system/python3

tests/common.sh

@@ -80,7 +80,8 @@ function build_sketches()
             continue  # Not ours to do
         fi
 
-        if [ -e $cache_dir/core/*.a ]; then
+        cacheas=( $cache_dir/core/*.a )
+        if [ -e ${cacheas[0]} ]; then
             # We need to preserve the build.options.json file and replace the last .ino
             # with this sketch's ino file, or builder will throw everything away.
             jq '."sketchLocation" = "'$sketch'"' $build_dir/build.options.json > $build_dir/build.options.json.tmp

tests/restyle.sh

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-for dir in ./cores/rp2040 ./libraries/EEPROM ./libraries/I2S \
+for dir in ./cores/rp2040 ./libraries/EEPROM ./libraries/I2S ./libraries/SingleFileDrive \
            ./libraries/LittleFS/src ./libraries/LittleFS/examples \
            ./libraries/rp2040 ./libraries/SD ./libraries/ESP8266SdFat \
            ./libraries/Servo ./libraries/SPI ./libraries/Wire ./libraries/PDM \

tools/json/adafruit_feather_scorpio.json

@@ -0,0 +1,54 @@
+{
+  "build": {
+    "arduino": {
+      "earlephilhower": {
+        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
+        "usb_vid": "0x239A",
+        "usb_pid": "0x8121"
+      }
+    },
+    "core": "earlephilhower",
+    "cpu": "cortex-m0plus",
+    "extra_flags": "-D ARDUINO_ADAFRUIT_FEATHER_RP2040_SCORPIO -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
+    "f_cpu": "133000000L",
+    "hwids": [
+      [
+        "0x2E8A",
+        "0x00C0"
+      ],
+      [
+        "0x239A",
+        "0x8121"
+      ]
+    ],
+    "mcu": "rp2040",
+    "variant": "adafruit_feather_scorpio"
+  },
+  "debug": {
+    "jlink_device": "RP2040_M0_0",
+    "openocd_target": "rp2040.cfg",
+    "svd_path": "rp2040.svd"
+  },
+  "frameworks": [
+    "arduino"
+  ],
+  "name": "Feather RP2040 SCORPIO",
+  "upload": {
+    "maximum_ram_size": 270336,
+    "maximum_size": 8388608,
+    "require_upload_port": true,
+    "native_usb": true,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": false,
+    "protocol": "picotool",
+    "protocols": [
+      "cmsis-dap",
+      "jlink",
+      "raspberrypi-swd",
+      "picotool",
+      "picoprobe"
+    ]
+  },
+  "url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
+  "vendor": "Adafruit"
+}

tools/json/arduino_nano_connect.json

@@ -4,7 +4,7 @@
       "earlephilhower": {
         "boot2_source": "boot2_w25q080_2_padded_checksum.S",
         "usb_vid": "0x2341",
-        "usb_pid": "0x0058"
+        "usb_pid": "0x005E"
       }
     },
     "core": "earlephilhower",
@@ -18,7 +18,7 @@
       ],
       [
         "0x2341",
-        "0x0058"
+        "0x005E"
       ]
     ],
     "mcu": "rp2040",

tools/json/datanoisetv_picoadk.json

@@ -0,0 +1,54 @@
+{
+  "build": {
+    "arduino": {
+      "earlephilhower": {
+        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
+        "usb_vid": "0x2E8A",
+        "usb_pid": "0x000A"
+      }
+    },
+    "core": "earlephilhower",
+    "cpu": "cortex-m0plus",
+    "extra_flags": "-D ARDUINO_DATANOISETV_PICOADK -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
+    "f_cpu": "133000000L",
+    "hwids": [
+      [
+        "0x2E8A",
+        "0x00C0"
+      ],
+      [
+        "0x2E8A",
+        "0x000A"
+      ]
+    ],
+    "mcu": "rp2040",
+    "variant": "datanoisetv_picoadk"
+  },
+  "debug": {
+    "jlink_device": "RP2040_M0_0",
+    "openocd_target": "rp2040.cfg",
+    "svd_path": "rp2040.svd"
+  },
+  "frameworks": [
+    "arduino"
+  ],
+  "name": "PicoADK",
+  "upload": {
+    "maximum_ram_size": 270336,
+    "maximum_size": 2097152,
+    "require_upload_port": true,
+    "native_usb": true,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": false,
+    "protocol": "picotool",
+    "protocols": [
+      "cmsis-dap",
+      "jlink",
+      "raspberrypi-swd",
+      "picotool",
+      "picoprobe"
+    ]
+  },
+  "url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
+  "vendor": "DatanoiseTV"
+}

tools/json/nullbits_bit_c_pro.json

@@ -0,0 +1,54 @@
+{
+  "build": {
+    "arduino": {
+      "earlephilhower": {
+        "boot2_source": "boot2_w25x10cl_4_padded_checksum.S",
+        "usb_vid": "0x2E8A",
+        "usb_pid": "0x6E61"
+      }
+    },
+    "core": "earlephilhower",
+    "cpu": "cortex-m0plus",
+    "extra_flags": "-D ARDUINO_NULLBITS_BIT_C_PRO -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=500",
+    "f_cpu": "133000000L",
+    "hwids": [
+      [
+        "0x2E8A",
+        "0x00C0"
+      ],
+      [
+        "0x2E8A",
+        "0x6E61"
+      ]
+    ],
+    "mcu": "rp2040",
+    "variant": "nullbits_bit_c_pro"
+  },
+  "debug": {
+    "jlink_device": "RP2040_M0_0",
+    "openocd_target": "rp2040.cfg",
+    "svd_path": "rp2040.svd"
+  },
+  "frameworks": [
+    "arduino"
+  ],
+  "name": "Bit-C PRO",
+  "upload": {
+    "maximum_ram_size": 270336,
+    "maximum_size": 4194304,
+    "require_upload_port": true,
+    "native_usb": true,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": false,
+    "protocol": "picotool",
+    "protocols": [
+      "cmsis-dap",
+      "jlink",
+      "raspberrypi-swd",
+      "picotool",
+      "picoprobe"
+    ]
+  },
+  "url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
+  "vendor": "nullbits"
+}

tools/json/viyalab_mizu.json

@@ -9,7 +9,7 @@
     },
     "core": "earlephilhower",
     "cpu": "cortex-m0plus",
-    "extra_flags": "-D ARDUINO_DEGZ_MIZU -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
+    "extra_flags": "-D ARDUINO_VIYALAB_MIZU_RP2040 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
     "f_cpu": "133000000L",
     "hwids": [
       [
@@ -22,7 +22,7 @@
       ]
     ],
     "mcu": "rp2040",
-    "variant": "degz_mizu"
+    "variant": "viyalab_mizu"
   },
   "debug": {
     "jlink_device": "RP2040_M0_0",
@@ -32,7 +32,7 @@
   "frameworks": [
     "arduino"
   ],
-  "name": "Mizu",
+  "name": "Mizu RP2040",
   "upload": {
     "maximum_ram_size": 270336,
     "maximum_size": 8388608,
@@ -50,5 +50,5 @@
     ]
   },
   "url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
-  "vendor": "Degz"
+  "vendor": "Viyalab"
 }

tools/json/waveshare_rp2040_lcd_0_96.json

@@ -0,0 +1,54 @@
+{
+  "build": {
+    "arduino": {
+      "earlephilhower": {
+        "boot2_source": "boot2_w25q16jvxq_4_padded_checksum.S",
+        "usb_vid": "0x2E8A",
+        "usb_pid": "0x1021"
+      }
+    },
+    "core": "earlephilhower",
+    "cpu": "cortex-m0plus",
+    "extra_flags": "-D ARDUINO_WAVESHARE_RP2040_LCD_0_96 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=500",
+    "f_cpu": "133000000L",
+    "hwids": [
+      [
+        "0x2E8A",
+        "0x00C0"
+      ],
+      [
+        "0x2E8A",
+        "0x1021"
+      ]
+    ],
+    "mcu": "rp2040",
+    "variant": "waveshare_rp2040_lcd_0_96"
+  },
+  "debug": {
+    "jlink_device": "RP2040_M0_0",
+    "openocd_target": "rp2040.cfg",
+    "svd_path": "rp2040.svd"
+  },
+  "frameworks": [
+    "arduino"
+  ],
+  "name": "RP2040 LCD 0.96",
+  "upload": {
+    "maximum_ram_size": 270336,
+    "maximum_size": 2097152,
+    "require_upload_port": true,
+    "native_usb": true,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": false,
+    "protocol": "picotool",
+    "protocols": [
+      "cmsis-dap",
+      "jlink",
+      "raspberrypi-swd",
+      "picotool",
+      "picoprobe"
+    ]
+  },
+  "url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
+  "vendor": "Waveshare"
+}

tools/json/waveshare_rp2040_lcd_1_28.json

@@ -0,0 +1,54 @@
+{
+  "build": {
+    "arduino": {
+      "earlephilhower": {
+        "boot2_source": "boot2_w25q16jvxq_4_padded_checksum.S",
+        "usb_vid": "0x2E8A",
+        "usb_pid": "0x1039"
+      }
+    },
+    "core": "earlephilhower",
+    "cpu": "cortex-m0plus",
+    "extra_flags": "-D ARDUINO_WAVESHARE_RP2040_LCD_1_28 -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=500",
+    "f_cpu": "133000000L",
+    "hwids": [
+      [
+        "0x2E8A",
+        "0x00C0"
+      ],
+      [
+        "0x2E8A",
+        "0x1039"
+      ]
+    ],
+    "mcu": "rp2040",
+    "variant": "waveshare_rp2040_lcd_1_28"
+  },
+  "debug": {
+    "jlink_device": "RP2040_M0_0",
+    "openocd_target": "rp2040.cfg",
+    "svd_path": "rp2040.svd"
+  },
+  "frameworks": [
+    "arduino"
+  ],
+  "name": "RP2040 LCD 1.28",
+  "upload": {
+    "maximum_ram_size": 270336,
+    "maximum_size": 2097152,
+    "require_upload_port": true,
+    "native_usb": true,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": false,
+    "protocol": "picotool",
+    "protocols": [
+      "cmsis-dap",
+      "jlink",
+      "raspberrypi-swd",
+      "picotool",
+      "picoprobe"
+    ]
+  },
+  "url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
+  "vendor": "Waveshare"
+}

tools/json/waveshare_rp2040_one.json

@@ -0,0 +1,54 @@
+{
+  "build": {
+    "arduino": {
+      "earlephilhower": {
+        "boot2_source": "boot2_w25q16jvxq_4_padded_checksum.S",
+        "usb_vid": "0x2E8A",
+        "usb_pid": "0x103A"
+      }
+    },
+    "core": "earlephilhower",
+    "cpu": "cortex-m0plus",
+    "extra_flags": "-D ARDUINO_WAVESHARE_RP2040_ONE -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=500",
+    "f_cpu": "133000000L",
+    "hwids": [
+      [
+        "0x2E8A",
+        "0x00C0"
+      ],
+      [
+        "0x2E8A",
+        "0x103A"
+      ]
+    ],
+    "mcu": "rp2040",
+    "variant": "waveshare_rp2040_one"
+  },
+  "debug": {
+    "jlink_device": "RP2040_M0_0",
+    "openocd_target": "rp2040.cfg",
+    "svd_path": "rp2040.svd"
+  },
+  "frameworks": [
+    "arduino"
+  ],
+  "name": "RP2040 One",
+  "upload": {
+    "maximum_ram_size": 270336,
+    "maximum_size": 4194304,
+    "require_upload_port": true,
+    "native_usb": true,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": false,
+    "protocol": "picotool",
+    "protocols": [
+      "cmsis-dap",
+      "jlink",
+      "raspberrypi-swd",
+      "picotool",
+      "picoprobe"
+    ]
+  },
+  "url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
+  "vendor": "Waveshare"
+}

tools/json/waveshare_rp2040_plus_16mb.json

@@ -0,0 +1,54 @@
+{
+  "build": {
+    "arduino": {
+      "earlephilhower": {
+        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
+        "usb_vid": "0x2E8A",
+        "usb_pid": "0x1020"
+      }
+    },
+    "core": "earlephilhower",
+    "cpu": "cortex-m0plus",
+    "extra_flags": "-D ARDUINO_WAVESHARE_RP2040_PLUS -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=500",
+    "f_cpu": "133000000L",
+    "hwids": [
+      [
+        "0x2E8A",
+        "0x00C0"
+      ],
+      [
+        "0x2E8A",
+        "0x1020"
+      ]
+    ],
+    "mcu": "rp2040",
+    "variant": "waveshare_rp2040_plus_16mb"
+  },
+  "debug": {
+    "jlink_device": "RP2040_M0_0",
+    "openocd_target": "rp2040.cfg",
+    "svd_path": "rp2040.svd"
+  },
+  "frameworks": [
+    "arduino"
+  ],
+  "name": "RP2040 Plus 16MB",
+  "upload": {
+    "maximum_ram_size": 270336,
+    "maximum_size": 16777216,
+    "require_upload_port": true,
+    "native_usb": true,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": false,
+    "protocol": "picotool",
+    "protocols": [
+      "cmsis-dap",
+      "jlink",
+      "raspberrypi-swd",
+      "picotool",
+      "picoprobe"
+    ]
+  },
+  "url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
+  "vendor": "Waveshare"
+}

tools/json/waveshare_rp2040_plus_4mb.json

@@ -0,0 +1,54 @@
+{
+  "build": {
+    "arduino": {
+      "earlephilhower": {
+        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
+        "usb_vid": "0x2E8A",
+        "usb_pid": "0x1020"
+      }
+    },
+    "core": "earlephilhower",
+    "cpu": "cortex-m0plus",
+    "extra_flags": "-D ARDUINO_WAVESHARE_RP2040_PLUS -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=500",
+    "f_cpu": "133000000L",
+    "hwids": [
+      [
+        "0x2E8A",
+        "0x00C0"
+      ],
+      [
+        "0x2E8A",
+        "0x1020"
+      ]
+    ],
+    "mcu": "rp2040",
+    "variant": "waveshare_rp2040_plus_4mb"
+  },
+  "debug": {
+    "jlink_device": "RP2040_M0_0",
+    "openocd_target": "rp2040.cfg",
+    "svd_path": "rp2040.svd"
+  },
+  "frameworks": [
+    "arduino"
+  ],
+  "name": "RP2040 Plus 4MB",
+  "upload": {
+    "maximum_ram_size": 270336,
+    "maximum_size": 4194304,
+    "require_upload_port": true,
+    "native_usb": true,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": false,
+    "protocol": "picotool",
+    "protocols": [
+      "cmsis-dap",
+      "jlink",
+      "raspberrypi-swd",
+      "picotool",
+      "picoprobe"
+    ]
+  },
+  "url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
+  "vendor": "Waveshare"
+}

tools/json/waveshare_rp2040_zero.json

@@ -0,0 +1,54 @@
+{
+  "build": {
+    "arduino": {
+      "earlephilhower": {
+        "boot2_source": "boot2_w25q16jvxq_4_padded_checksum.S",
+        "usb_vid": "0x2E8A",
+        "usb_pid": "0x0003"
+      }
+    },
+    "core": "earlephilhower",
+    "cpu": "cortex-m0plus",
+    "extra_flags": "-D ARDUINO_WAVESHARE_RP2040_ZERO -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=500",
+    "f_cpu": "133000000L",
+    "hwids": [
+      [
+        "0x2E8A",
+        "0x00C0"
+      ],
+      [
+        "0x2E8A",
+        "0x0003"
+      ]
+    ],
+    "mcu": "rp2040",
+    "variant": "waveshare_rp2040_zero"
+  },
+  "debug": {
+    "jlink_device": "RP2040_M0_0",
+    "openocd_target": "rp2040.cfg",
+    "svd_path": "rp2040.svd"
+  },
+  "frameworks": [
+    "arduino"
+  ],
+  "name": "RP2040 Zero",
+  "upload": {
+    "maximum_ram_size": 270336,
+    "maximum_size": 2097152,
+    "require_upload_port": true,
+    "native_usb": true,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": false,
+    "protocol": "picotool",
+    "protocols": [
+      "cmsis-dap",
+      "jlink",
+      "raspberrypi-swd",
+      "picotool",
+      "picoprobe"
+    ]
+  },
+  "url": "https://www.raspberrypi.org/products/raspberry-pi-pico/",
+  "vendor": "Waveshare"
+}

tools/libpico/tusb_config.h

@@ -72,15 +72,14 @@
 //------------- CLASS -------------//
 #define CFG_TUD_HID              (2)
 #define CFG_TUD_CDC              (1)
-#define CFG_TUD_MSC              (0)
+#define CFG_TUD_MSC              (1)
 #define CFG_TUD_MIDI             (0)
 #define CFG_TUD_VENDOR           (0)
 
 #define CFG_TUD_CDC_RX_BUFSIZE  (256)
 #define CFG_TUD_CDC_TX_BUFSIZE  (256)
 
-#define CFG_TUD_MIDI_RX_BUFSIZE (64)
-#define CFG_TUD_MIDI_TX_BUFSIZE (64)
+#define CFG_TUD_MSC_EP_BUFSIZE  (64)
 
 // HID buffer size Should be sufficient to hold ID (if any) + Data
 #define CFG_TUD_HID_EP_BUFSIZE  (64)

tools/makeboards.py

@@ -70,7 +70,7 @@ def BuildBoot(name):
             ("IS25LP080 QSPI /2", "boot2_is25lp080_2_padded_checksum"), ("IS25LP080 QSPI /4", "boot2_is25lp080_4_padded_checksum"),
             ("W25Q080 QSPI /2", "boot2_w25q080_2_padded_checksum"), ("W25Q080 QSPI /4", "boot2_w25q080_4_padded_checksum"),
             ("W25X10CL QSPI /2", "boot2_w25x10cl_2_padded_checksum"), ("W25X10CL QSPI /4", "boot2_w25x10cl_4_padded_checksum"),
-            ("W25Q64JV QSPI /4", "boot2_w25q64jv_4_padded_checksum") ]:
+            ("W25Q64JV QSPI /4", "boot2_w25q64jv_4_padded_checksum"), ("W25Q16JVxQ QSPI /4", "boot2_w25q16jvxq_4_padded_checksum") ]:
         print("%s.menu.boot2.%s=%s" % (name, l[1], l[0]))
         print("%s.menu.boot2.%s.build.boot2=%s" % (name, l[1], l[1]))
 
@@ -110,15 +110,24 @@ def BuildHeader(name, vendor_name, product_name, vidtouse, pidtouse, vid, pid, p
     print("# %s" % (prettyname))
     print("# -----------------------------------")
     print("%s.name=%s" % (name, prettyname))
-    usb = 0;
-    for kb in [ "0", "0x8000" ]:
-        for ms in [ "0", "0x4000" ]:
-            for jy in [ "0", "0x0100" ]:
-                thispid = int(pidtouse, 16) | int(kb, 16) | int(ms, 16) | int(jy, 16)
-                print("%s.vid.%d=%s" % (name, usb, vidtouse))
-                print("%s.pid.%d=0x%04x" % (name, usb, thispid))
-                usb = usb + 1
-    print("%s.build.usbpid=-DSERIALUSB_PID=%s" % (name, pid))
+    usb = 0
+    if type(pidtouse) == list:
+        for tp in pid:
+            print("%s.vid.%d=%s" % (name, usb, vidtouse))
+            print("%s.pid.%d=0x%04x" % (name, usb, int(tp, 16)))
+            usb = usb + 1
+    else:
+        for kb in [ "0", "0x8000" ]:
+            for ms in [ "0", "0x4000" ]:
+                for jy in [ "0", "0x0100" ]:
+                    thispid = int(pidtouse, 16) | int(kb, 16) | int(ms, 16) | int(jy, 16)
+                    print("%s.vid.%d=%s" % (name, usb, vidtouse))
+                    print("%s.pid.%d=0x%04x" % (name, usb, thispid))
+                    usb = usb + 1
+    if type(pid) == list:
+        print("%s.build.usbpid=-DSERIALUSB_PID=%s" % (name, pid[0]))
+    else:
+        print("%s.build.usbpid=-DSERIALUSB_PID=%s" % (name, pid))
     print("%s.build.usbpwr=-DUSBD_MAX_POWER_MA=%s" % (name, pwr))
     print("%s.build.board=%s" % (name, boarddefine))
     print("%s.build.mcu=cortex-m0plus" % (name))
@@ -141,7 +150,10 @@ def BuildHeader(name, vendor_name, product_name, vidtouse, pidtouse, vid, pid, p
     print("%s.build.debugscript=%s" % (name, dbg))
     print("%s.build.boot2=%s" % (name, boot2))
     print("%s.build.vid=%s" % (name, vid))
-    print("%s.build.pid=%s" % (name, pid))
+    if type(pid) == list:
+        print("%s.build.pid=%s" % (name, pid[0]))
+    else:
+        print("%s.build.pid=%s" % (name, pid))
     print('%s.build.usb_manufacturer="%s"' % (name, vendor_name))
     print('%s.build.usb_product="%s"' % (name, product_name))
     if extra != None:
@@ -205,10 +217,9 @@ def MakeBoard(name, vendor_name, product_name, vid, pid, pwr, boarddefine, flash
         BuildExceptions(n)
         BuildDebugPort(n)
         BuildDebugLevel(n)
-        if a == "picodebug":
-            BuildWithoutUSBStack(n)
-        else:
+        if a != "picodebug":
             BuildUSBStack(n)
+        BuildWithoutUSBStack(n)
         if name == "rpipicow":
             BuildCountry(n)
         BuildIPStack(n)
@@ -221,6 +232,8 @@ def MakeBoard(name, vendor_name, product_name, vid, pid, pwr, boarddefine, flash
     pkgjson['packages'][0]['platforms'][0]['boards'].append(thisbrd)
 
 def MakeBoardJSON(name, vendor_name, product_name, vid, pid, pwr, boarddefine, flashsizemb, boot2, extra):
+    if type(pid) == list:
+        pid = pid[0]
     if extra != None:
         m_extra = ' '
         for m_item in extra:
@@ -313,6 +326,7 @@ MakeBoard("rpipicow", "Raspberry Pi", "Pico W", "0x2e8a", "0xf00a", 250, "RASPBE
 
 # Adafruit
 MakeBoard("adafruit_feather", "Adafruit", "Feather RP2040", "0x239a", "0x80f1", 250, "ADAFRUIT_FEATHER_RP2040", 8, "boot2_w25x10cl_4_padded_checksum")
+MakeBoard("adafruit_feather_scorpio", "Adafruit", "Feather RP2040 SCORPIO", "0x239a", "0x8121", 250, "ADAFRUIT_FEATHER_RP2040_SCORPIO", 8, "boot2_w25q080_2_padded_checksum")
 MakeBoard("adafruit_itsybitsy", "Adafruit", "ItsyBitsy RP2040", "0x239a", "0x80fd", 250, "ADAFRUIT_ITSYBITSY_RP2040", 8, "boot2_w25q080_2_padded_checksum")
 MakeBoard("adafruit_qtpy", "Adafruit", "QT Py RP2040", "0x239a", "0x80f7", 250, "ADAFRUIT_QTPY_RP2040", 8, "boot2_w25q080_2_padded_checksum")
 MakeBoard("adafruit_stemmafriend", "Adafruit", "STEMMA Friend RP2040", "0x239a", "0x80e3", 250, "ADAFRUIT_STEMMAFRIEND_RP2040", 8, "boot2_w25q080_2_padded_checksum")
@@ -321,7 +335,7 @@ MakeBoard("adafruit_macropad2040", "Adafruit", "MacroPad RP2040", "0x239a", "0x8
 MakeBoard("adafruit_kb2040", "Adafruit", "KB2040", "0x239a", "0x8105", 250, "ADAFRUIT_KB2040_RP2040", 8, "boot2_w25q080_2_padded_checksum")
 
 # Arduino
-MakeBoard("arduino_nano_connect", "Arduino", "Nano RP2040 Connect", "0x2341", "0x0058", 250, "NANO_RP2040_CONNECT", 16, "boot2_w25q080_2_padded_checksum")
+MakeBoard("arduino_nano_connect", "Arduino", "Nano RP2040 Connect", "0x2341", ["0x005e", "0x805e", "0x015e", "0x025e"] , 250, "NANO_RP2040_CONNECT", 16, "boot2_w25q080_2_padded_checksum")
 
 # BridgeTek
 MakeBoard("bridgetek_idm2040-7a", "BridgeTek", "IDM2040-7A", "0x2e8a", "0x1041", 250, "BRIDGETEK_IDM2040-7A", 8, "boot2_w25q080_2_padded_checksum", ["FT8XX_TYPE=BT817", "DISPLAY_RES=WVGA", "PLATFORM_RP2040"])
@@ -330,8 +344,8 @@ MakeBoard("bridgetek_idm2040-7a", "BridgeTek", "IDM2040-7A", "0x2e8a", "0x1041",
 MakeBoard("cytron_maker_nano_rp2040", "Cytron", "Maker Nano RP2040", "0x2e8a", "0x100f", 250, "CYTRON_MAKER_NANO_RP2040", 2, "boot2_w25q080_2_padded_checksum")
 MakeBoard("cytron_maker_pi_rp2040", "Cytron", "Maker Pi RP2040", "0x2e8a", "0x1000", 250, "CYTRON_MAKER_PI_RP2040", 2, "boot2_w25q080_2_padded_checksum")
 
-# Degz
-MakeBoard("degz_mizu", "Degz", "Mizu", "0x2e8a", "0x000a", 250, "DEGZ_MIZU", 8, "boot2_generic_03h_4_padded_checksum")
+# DatanoiseTV
+MakeBoard("datanoisetv_picoadk", "DatanoiseTV", "PicoADK", "0x2e8a", "0x000a", 250, "DATANOISETV_PICOADK", 2, "boot2_w25q080_2_padded_checksum")
 
 # DeRuiLab
 MakeBoard("flyboard2040_core", "DeRuiLab", "FlyBoard2040Core", "0x2e8a", "0x008a", 500, "FLYBOARD2040_CORE", 4, "boot2_w25q080_2_padded_checksum")
@@ -360,6 +374,9 @@ MakeBoard("ilabs_rpico32", "iLabs", "RPICO32", "0x2e8a", "0x1010", 250, "ILABS_2
 MakeBoard("melopero_cookie_rp2040", "Melopero", "Cookie RP2040", "0x2e8a", "0x1011", 250, "MELOPERO_COOKIE_RP2040", 8, "boot2_w25q080_2_padded_checksum")
 MakeBoard("melopero_shake_rp2040", "Melopero", "Shake RP2040", "0x2e8a", "0x1005", 250, "MELOPERO_SHAKE_RP2040", 16, "boot2_w25q080_2_padded_checksum")
 
+# nullbits
+MakeBoard("nullbits_bit_c_pro", "nullbits", "Bit-C PRO", "0x2e8a", "0x6e61", 500, "NULLBITS_BIT_C_PRO", 4, "boot2_w25x10cl_4_padded_checksum")
+
 # Pimoroni
 MakeBoard("pimoroni_pga2040", "Pimoroni", "PGA2040", "0x2e8a", "0x1008", 250, "PIMORONI_PGA2040", 8, "boot2_w25q64jv_4_padded_checksum")
 
@@ -376,6 +393,16 @@ MakeBoard("upesy_rp2040_devkit", "uPesy", "RP2040 DevKit", "0x2e8a", "0x1007", 2
 # Seeed
 MakeBoard("seeed_xiao_rp2040", "Seeed", "XIAO RP2040", "0x2e8a", "0x000a", 250, "SEEED_XIAO_RP2040", 2, "boot2_w25q080_2_padded_checksum")
 
+# Viyalab
+MakeBoard("viyalab_mizu", "Viyalab", "Mizu RP2040", "0x2e8a", "0x000a", 250, "VIYALAB_MIZU_RP2040", 8, "boot2_generic_03h_4_padded_checksum")
+
+# Waveshare
+MakeBoard("waveshare_rp2040_zero", "Waveshare", "RP2040 Zero", "0x2e8a", "0x0003", 500, "WAVESHARE_RP2040_ZERO", 2, "boot2_w25q16jvxq_4_padded_checksum")
+MakeBoard("waveshare_rp2040_one", "Waveshare", "RP2040 One", "0x2e8a", "0x103a", 500, "WAVESHARE_RP2040_ONE", 4, "boot2_w25q16jvxq_4_padded_checksum")
+MakeBoard("waveshare_rp2040_plus_4mb", "Waveshare", "RP2040 Plus 4MB", "0x2e8a", "0x1020", 500, "WAVESHARE_RP2040_PLUS", 4, "boot2_w25q080_2_padded_checksum")
+MakeBoard("waveshare_rp2040_plus_16mb", "Waveshare", "RP2040 Plus 16MB", "0x2e8a", "0x1020", 500, "WAVESHARE_RP2040_PLUS", 16, "boot2_w25q080_2_padded_checksum")
+MakeBoard("waveshare_rp2040_lcd_0_96", "Waveshare", "RP2040 LCD 0.96", "0x2e8a", "0x1021", 500, "WAVESHARE_RP2040_LCD_0_96", 2, "boot2_w25q16jvxq_4_padded_checksum")
+MakeBoard("waveshare_rp2040_lcd_1_28", "Waveshare", "RP2040 LCD 1.28", "0x2e8a", "0x1039", 500, "WAVESHARE_RP2040_LCD_1_28", 2, "boot2_w25q16jvxq_4_padded_checksum")
 # WIZnet
 MakeBoard("wiznet_5100s_evb_pico", "WIZnet", "W5100S-EVB-Pico", "0x2e8a", "0x1027", 250, "WIZNET_5100S_EVB_PICO", 2, "boot2_w25q080_2_padded_checksum")
 MakeBoard("wiznet_wizfi360_evb_pico", "WIZnet", "WizFi360-EVB-Pico", "0x2e8a", "0x1028", 250, "WIZNET_WIZFI360_EVB_PICO", 2, "boot2_w25q080_2_padded_checksum")

tools/pluggable_discovery.py

@@ -54,6 +54,7 @@ def scanner():
     scannerGo = True
 
 def main():
+    global scannerGo
     while True:
         cmdline = input()
         cmd = cmdline.split()[0]

variants/adafruit_feather_scorpio/pins_arduino.h

@@ -0,0 +1,42 @@
+#pragma once
+
+// Pin definitions taken from:
+//    https://learn.adafruit.com/assets/100337
+
+// LEDs
+#define PIN_LED        (13u)
+
+// NeoPixel
+#define PIN_NEOPIXEL   (4u)
+
+// Serial
+#define PIN_SERIAL1_TX (0u)
+#define PIN_SERIAL1_RX (1u)
+
+// Not pinned out
+#define PIN_SERIAL2_TX (31u)
+#define PIN_SERIAL2_RX (31u)
+
+// SPI
+#define PIN_SPI0_MISO  (8u)
+#define PIN_SPI0_MOSI  (15u)
+#define PIN_SPI0_SCK   (14u)
+#define PIN_SPI0_SS    (13u)
+
+// Not pinned out
+#define PIN_SPI1_MISO  (31u)
+#define PIN_SPI1_MOSI  (31u)
+#define PIN_SPI1_SCK   (31u)
+#define PIN_SPI1_SS    (31u)
+
+// Wire
+#define PIN_WIRE0_SDA  (2u)
+#define PIN_WIRE0_SCL  (3u)
+#define PIN_WIRE1_SDA  (31u)
+#define PIN_WIRE1_SCL  (31u)
+
+#define SERIAL_HOWMANY (2u)
+#define SPI_HOWMANY    (1u)
+#define WIRE_HOWMANY   (1u)
+
+#include "../generic/common.h"

variants/datanoisetv_picoadk/pins_arduino.h

@@ -0,0 +1,51 @@
+#pragma once
+
+// DatanoiseTV PicoADK+ - Audio Development Kit
+// Pin definitions taken from:
+// https://github.com/DatanoiseTV/PicoDSP-Hardware
+
+// LEDs
+#define PIN_LED        (15u)
+
+// Debug LEDs near the USB connector
+#define PIN_LED0       (2u)
+#define PIN_LED1       (3u)
+#define PIN_LED2       (4u)
+#define PIN_LED3       (5u)
+
+// Serial
+#define PIN_SERIAL1_TX (0u)
+#define PIN_SERIAL1_RX (1u)
+
+#define PIN_SERIAL2_TX (8u)
+#define PIN_SERIAL2_RX (9u)
+
+// SPI0
+#define PIN_SPI0_MISO  (16u)
+#define PIN_SPI0_MOSI  (19u)
+#define PIN_SPI0_SCK   (18u)
+#define PIN_SPI0_SS    (17u)
+
+// SPI1
+#define PIN_SPI1_MISO  (12u)
+#define PIN_SPI1_MOSI  (11u)
+#define PIN_SPI1_SCK   (10u)
+#define PIN_SPI1_SS    (13u)
+
+// Wire
+#define PIN_WIRE0_SDA  (8u)
+#define PIN_WIRE0_SCL  (9u)
+
+#define PIN_WIRE1_SDA  (6u)
+#define PIN_WIRE1_SCL  (7u)
+
+// I2S
+#define PIN_I2S_BCLK   (17u)
+#define PIN_I2S_LRCLK  (18u)
+#define PIN_I2S_DOUT   (16u)
+
+#define SERIAL_HOWMANY (3u)
+#define SPI_HOWMANY    (2u)
+#define WIRE_HOWMANY   (2u)
+
+#include "../generic/common.h"

variants/nullbits_bit_c_pro/pins_arduino.h

@@ -0,0 +1,37 @@
+#pragma once
+
+// Taken from pinout at https://nullbits.co/static/img/BIt-C_PRO_pinout.png
+
+// LEDs
+#define PIN_LED        (18u)
+
+// UARTs
+#define PIN_SERIAL1_TX (0u)
+#define PIN_SERIAL1_RX (1u)
+
+#define PIN_SERIAL2_TX (8u)
+#define PIN_SERIAL2_RX (9u)
+
+// SPI
+#define PIN_SPI0_MISO  (20u)
+#define PIN_SPI0_MOSI  (23u)
+#define PIN_SPI0_SCK   (22u)
+#define PIN_SPI0_SS    (21u)
+
+#define PIN_SPI1_MISO  (12u)
+#define PIN_SPI1_MOSI  (11u)
+#define PIN_SPI1_SCK   (14u)
+#define PIN_SPI1_SS    (13u)
+
+// Wire
+#define PIN_WIRE0_SDA  (2u)
+#define PIN_WIRE0_SCL  (3u)
+
+#define PIN_WIRE1_SDA  (4u)
+#define PIN_WIRE1_SCL  (5u)
+
+#define SERIAL_HOWMANY (3u)
+#define SPI_HOWMANY    (2u)
+#define WIRE_HOWMANY   (2u)
+
+#include "../generic/common.h"

variants/waveshare_rp2040_lcd_0_96/pins_arduino.h

@@ -0,0 +1,78 @@
+#pragma once
+
+// Waveshare RP2040 lcd 0.96
+// https://www.waveshare.com/wiki/RP2040-LCD-0.96
+// https://www.waveshare.com/w/upload/0/01/RP2040-LCD-0.96.pdf
+// https://www.waveshare.com/img/devkit/RP2040-LCD-0.96/RP2040-LCD-0.96-details-7.jpg
+//
+
+/*
+                  Pin#                Pin#
+                       ___(_____)___
+           GPIO0   1  |   *USB C*   | 40   VBUS
+           GPIO1   2  |             | 39   VSYS
+             GND   3  |             | 38   GND
+           GPIO2   4  |             | 37   3V3_EN
+           GPIO3   5  |             | 36   3V3(OUT)
+           GPIO4   6  |             | 35   ADC_VREF
+           GPIO5   7  |             | 34   GPIO28
+             GND   8  |             | 33   GND
+           GPIO6   9  |             | 32   GPIO27
+           GPIO7  10  |             | 31   GPIO26
+           GPIO8  11  |             | 30   RUN
+           GPIO9  12  |             | 29   GPIO22
+             GND  13  |             | 28   GND
+          GPIO10  14  |             | 27   GPIO21
+          GPIO11  15  |             | 25   GPIO20
+          GPIO12  16  |             | 25   GPIO19
+          GPIO13  17  |             | 24   GPIO18
+             GND  18  |             | 23   GND
+          GPIO14  19  |             | 22   GPIO17
+          GPIO15  20  |____|_|_|____| 21   GPIO16
+                           S G S
+                           W N W
+                           C D D
+                           L   I
+                           K   N
+*/
+
+// LCD  
+#define LDC_SPI         (1u)    
+#define PIN_LCD_DC      (8u)    
+#define PIN_LCD_CS      (9u)    
+#define PIN_LCD_SCLK    (10u)   
+#define PIN_LCD_MOSI    (11u)   
+#define PIN_LCD_RST     (12u)   
+#define PIN_LCD_BL      (25u)   
+  
+// Serial 
+#define PIN_SERIAL1_TX  (0u)    
+#define PIN_SERIAL1_RX  (1u)    
+  
+#define PIN_SERIAL2_TX  (8u)    
+#define PIN_SERIAL2_RX  (9u)    
+  
+// SPI  
+#define PIN_SPI0_MISO   (16u)   
+#define PIN_SPI0_MOSI   (19u)   
+#define PIN_SPI0_SCK    (18u)   
+#define PIN_SPI0_SS     (17u)   
+  
+#define PIN_SPI1_MISO   (12u)   
+#define PIN_SPI1_MOSI   (15u)   
+#define PIN_SPI1_SCK    (14u)   
+#define PIN_SPI1_SS     (13u)   
+  
+// Wire 
+#define PIN_WIRE0_SDA   (8u)  
+#define PIN_WIRE0_SCL   (9u)  
+  
+#define PIN_WIRE1_SDA   (6u)  
+#define PIN_WIRE1_SCL   (7u)  
+  
+#define SERIAL_HOWMANY  (3u)  
+#define SPI_HOWMANY     (2u)  
+#define WIRE_HOWMANY    (2u)  
+  
+#include "../generic/common.h"  
+  

variants/waveshare_rp2040_lcd_1_28/pins_arduino.h

@@ -0,0 +1,70 @@
+#pragma once        
+
+// Waveshare RP2040 LCD 1.28
+// https://www.waveshare.com/wiki/RP2040-LCD-1.28
+// https://www.waveshare.com/w/upload/6/60/RP2040-LCD-1.28-sch.pdf
+// https://www.waveshare.com/img/devkit/RP2040-LCD-1.28/RP2040-LCD-1.28-details-3.jpg
+//
+
+/*
+                 H1                                H2
+            Pin#    Pin#                      Pin#    Pin#
+    GPIO8   1       2    GPIO0        GND     1       2   GND   
+    GPIO9   3       4    GPIO1        VSYS    3       4   ADC_AVDD  
+    GPIO10  5       6    GPIO2        GPIO23  5       6   BOOT
+    GPIO11  7       8    GPIO3        GPIO22  7       8   RUM
+    GPIO12  9       10   GPIO4        GPIO21  9       10  GPIO29
+    GPIO13  11      12   GPIO5        GPIO20  11      12  GPIO28
+    GPIO14  13      14   GPIO6        GPIO19  13      14  GPIO27
+    GPIO15  15      16   GPIO7        GPIO18  15      16  GPIO26
+    SWCLK   17      18   VSYS         GPIO17  17      18  GPIO25
+    SWDIP   19      20   GND          GPIO16  19      20  GPIO24
+*/
+
+// LCD                              
+#define LDC_SPI         (1u)        
+#define PIN_LCD_DC      (8u)        
+#define PIN_LCD_CS      (9u)        
+#define PIN_LCD_SCLK    (10u)       
+#define PIN_LCD_MOSI    (11u)       
+#define PIN_LCD_RST     (12u)       
+#define PIN_LCD_BL      (25u)       
+// BAT_ADC                          
+#define PIN_BAT_ADC      (25u)      
+// IMU                              
+#define PIN_IMU_SDA      (6u)        
+#define PIN_IMU_SCL      (7u)       
+#define PIN_IMU_INT1     (23u)      
+#define PIN_IMU_INT2     (24u)      
+
+// Serial                           
+#define PIN_SERIAL1_TX  (0u)        
+#define PIN_SERIAL1_RX  (1u)        
+
+#define PIN_SERIAL2_TX  (8u)        
+#define PIN_SERIAL2_RX  (9u)        
+
+// SPI                              
+#define PIN_SPI0_MISO   (16u)       
+#define PIN_SPI0_MOSI   (19u)       
+#define PIN_SPI0_SCK    (18u)       
+#define PIN_SPI0_SS     (17u)       
+
+#define PIN_SPI1_MISO   (12u)       
+#define PIN_SPI1_MOSI   (15u)       
+#define PIN_SPI1_SCK    (14u)       
+#define PIN_SPI1_SS     (13u)       
+
+// Wire                             
+#define PIN_WIRE0_SDA   (8u)        
+#define PIN_WIRE0_SCL   (9u)        
+
+#define PIN_WIRE1_SDA   (6u)        
+#define PIN_WIRE1_SCL   (7u)        
+
+#define SERIAL_HOWMANY  (3u)        
+#define SPI_HOWMANY     (2u)        
+#define WIRE_HOWMANY    (2u)        
+
+#include "../generic/common.h"      
+

variants/waveshare_rp2040_one/pins_arduino.h

@@ -0,0 +1,65 @@
+#pragma once
+
+// Waveshare RP2040 One
+// https://www.waveshare.com/wiki/RP2040-One
+// https://www.waveshare.com/w/upload/9/90/RP2040-One.pdf
+// https://www.waveshare.com/img/devkit/RP2040-One/RP2040-One-details-9.jpg
+
+/*
+                Pin#              Pin#
+                        _____
+                       |USB A|
+                    ___|     |___
+              5v 1 |             | 23 GPIO0
+             GND 2 |             | 22 GPIO1
+            3.3v 3 |             | 21 GPIO2
+          GPIO29 4 |             | 20 GPIO3
+          GPIO28 5 |             | 19 GPIO4
+          GPIO27 6 |             | 18 GPIO5
+          GPIO26 7 |             | 17 GPIO6
+          GPIO15 8 |             | 16 GPIO7
+          GPIO14 9 |__|_|_|_|_|__| 15 GPIO8
+                      1 1 1 1 1
+                      0 1 2 3 4
+
+                    Pin10 = GPIO13
+                    Pin11 = GPIO12
+                    Pin12 = GPIO11
+                    Pin13 = GPIO10
+                    Pin14 = GPIO9
+*/
+
+// NeoPixel                                     
+#define PIN_NEOPIXEL   (16u)        
+//#define LED_BUILTIN PIN_NEOPIXEL  
+
+// Serial1                          
+#define PIN_SERIAL1_TX (0u)         
+#define PIN_SERIAL1_RX (1u)         
+
+#define PIN_SERIAL2_TX (8u)         
+#define PIN_SERIAL2_RX (9u)         
+
+// SPI                              
+#define PIN_SPI0_MISO  (4u)         
+#define PIN_SPI0_MOSI  (3u)         
+#define PIN_SPI0_SCK   (2u)         
+#define PIN_SPI0_SS    (5u)         
+
+#define PIN_SPI1_MISO  (12u)        
+#define PIN_SPI1_MOSI  (15u)        
+#define PIN_SPI1_SCK   (14u)        
+#define PIN_SPI1_SS    (13u)        
+
+// Wire                             
+#define PIN_WIRE0_SDA  (4u)         
+#define PIN_WIRE0_SCL  (5u)         
+
+#define PIN_WIRE1_SDA  (26u)        
+#define PIN_WIRE1_SCL  (27u)        
+
+#define SERIAL_HOWMANY (2u)         
+#define SPI_HOWMANY    (2u)         
+#define WIRE_HOWMANY   (2u)         
+
+#include "../generic/common.h"      

variants/waveshare_rp2040_plus_16mb/pins_arduino.h

@@ -0,0 +1,72 @@
+#pragma once
+
+// Waveshare RP2040 Plus
+// https://www.waveshare.com/wiki/RP2040-Plus
+// https://www.waveshare.com/w/upload/d/d1/RP2040_Plus.pdf
+// https://www.waveshare.com/img/devkit/RP2040-Plus/RP2040-Plus-details-7.jpg
+//
+
+/*
+                  Pin#                Pin#
+                       ___(_____)___
+           GPIO0   1  |   *USB C*   | 40   VBUS
+           GPIO1   2  |             | 39   VSYS
+             GND   3  |             | 38   GND
+           GPIO2   4  |             | 37   3V3_EN
+           GPIO3   5  |             | 36   3V3(OUT)
+           GPIO4   6  |             | 35   ADC_VREF
+           GPIO5   7  |             | 34   GPIO28
+             GND   8  |             | 33   GND
+           GPIO6   9  |             | 32   GPIO27
+           GPIO7  10  |             | 31   GPIO26
+           GPIO8  11  |             | 30   RUN
+           GPIO9  12  |             | 29   GPIO22
+             GND  13  |             | 28   GND
+          GPIO10  14  |             | 27   GPIO21
+          GPIO11  15  |             | 25   GPIO20
+          GPIO12  16  |             | 25   GPIO19
+          GPIO13  17  |             | 24   GPIO18
+             GND  18  |             | 23   GND
+          GPIO14  19  |             | 22   GPIO17
+          GPIO15  20  |____|_|_|____| 21   GPIO16
+                           S G S
+                           W N W
+                           C D D
+                           L   I
+                           K   N
+*/
+
+// LEDs
+#define PIN_LED        (25u) 
+ 
+// Serial 
+#define PIN_SERIAL1_TX (0u) 
+#define PIN_SERIAL1_RX (1u) 
+ 
+#define PIN_SERIAL2_TX (8u) 
+#define PIN_SERIAL2_RX (9u) 
+ 
+// SPI 
+#define PIN_SPI0_MISO  (16u) 
+#define PIN_SPI0_MOSI  (19u) 
+#define PIN_SPI0_SCK   (18u) 
+#define PIN_SPI0_SS    (17u) 
+ 
+#define PIN_SPI1_MISO  (12u) 
+#define PIN_SPI1_MOSI  (15u) 
+#define PIN_SPI1_SCK   (14u) 
+#define PIN_SPI1_SS    (13u) 
+ 
+// Wire 
+#define PIN_WIRE0_SDA  (8u) 
+#define PIN_WIRE0_SCL  (9u) 
+ 
+#define PIN_WIRE1_SDA  (6u) 
+#define PIN_WIRE1_SCL  (7u) 
+ 
+#define SERIAL_HOWMANY (3u) 
+#define SPI_HOWMANY    (2u) 
+#define WIRE_HOWMANY   (2u) 
+
+
+#include "../generic/common.h"

variants/waveshare_rp2040_plus_4mb/pins_arduino.h

@@ -0,0 +1,72 @@
+#pragma once
+
+// Waveshare RP2040 Plus
+// https://www.waveshare.com/wiki/RP2040-Plus
+// https://www.waveshare.com/w/upload/d/d1/RP2040_Plus.pdf
+// https://www.waveshare.com/img/devkit/RP2040-Plus/RP2040-Plus-details-7.jpg
+//
+
+/*
+                  Pin#                Pin#
+                       ___(_____)___
+           GPIO0   1  |   *USB C*   | 40   VBUS
+           GPIO1   2  |             | 39   VSYS
+             GND   3  |             | 38   GND
+           GPIO2   4  |             | 37   3V3_EN
+           GPIO3   5  |             | 36   3V3(OUT)
+           GPIO4   6  |             | 35   ADC_VREF
+           GPIO5   7  |             | 34   GPIO28
+             GND   8  |             | 33   GND
+           GPIO6   9  |             | 32   GPIO27
+           GPIO7  10  |             | 31   GPIO26
+           GPIO8  11  |             | 30   RUN
+           GPIO9  12  |             | 29   GPIO22
+             GND  13  |             | 28   GND
+          GPIO10  14  |             | 27   GPIO21
+          GPIO11  15  |             | 25   GPIO20
+          GPIO12  16  |             | 25   GPIO19
+          GPIO13  17  |             | 24   GPIO18
+             GND  18  |             | 23   GND
+          GPIO14  19  |             | 22   GPIO17
+          GPIO15  20  |____|_|_|____| 21   GPIO16
+                           S G S
+                           W N W
+                           C D D
+                           L   I
+                           K   N
+*/
+
+// LEDs
+#define PIN_LED        (25u) 
+ 
+// Serial 
+#define PIN_SERIAL1_TX (0u) 
+#define PIN_SERIAL1_RX (1u) 
+ 
+#define PIN_SERIAL2_TX (8u) 
+#define PIN_SERIAL2_RX (9u) 
+ 
+// SPI 
+#define PIN_SPI0_MISO  (16u) 
+#define PIN_SPI0_MOSI  (19u) 
+#define PIN_SPI0_SCK   (18u) 
+#define PIN_SPI0_SS    (17u) 
+ 
+#define PIN_SPI1_MISO  (12u) 
+#define PIN_SPI1_MOSI  (15u) 
+#define PIN_SPI1_SCK   (14u) 
+#define PIN_SPI1_SS    (13u) 
+ 
+// Wire 
+#define PIN_WIRE0_SDA  (8u) 
+#define PIN_WIRE0_SCL  (9u) 
+ 
+#define PIN_WIRE1_SDA  (6u) 
+#define PIN_WIRE1_SCL  (7u) 
+ 
+#define SERIAL_HOWMANY (3u) 
+#define SPI_HOWMANY    (2u) 
+#define WIRE_HOWMANY   (2u) 
+
+
+#include "../generic/common.h"

variants/waveshare_rp2040_zero/pins_arduino.h

@@ -0,0 +1,66 @@
+#pragma once
+
+// Waveshare RP2040 Zero
+// https://www.waveshare.com/wiki/RP2040-Zero
+// https://www.waveshare.com/w/upload/4/4c/RP2040_Zero.pdf
+// https://www.waveshare.com/img/devkit/RP2040-Zero/RP2040-Zero-details-7.jpg
+//
+// https://www.mischianti.org/2022/09/19/waveshare-rp2040-zero-high-resolution-pinout-and-specs/
+// https://www.mischianti.org/wp-content/uploads/2022/09/Waveshare-rp2040-zero-Raspberry-Pi-Pico-alternative-pinout.jpg
+
+/*
+                Pin#              Pin#
+                    ___(_____)___
+              5v 1 |   *USB C*   | 23 GPIO0
+             GND 2 |             | 22 GPIO1
+            3.3v 3 |             | 21 GPIO2
+          GPIO29 4 |             | 20 GPIO3
+          GPIO28 5 |             | 19 GPIO4
+          GPIO27 6 |             | 18 GPIO5
+          GPIO26 7 |             | 17 GPIO6
+          GPIO15 8 |             | 16 GPIO7
+          GPIO14 9 |__|_|_|_|_|__| 15 GPIO8
+                      1 1 1 1 1
+                      0 1 2 3 4
+
+                    Pin10 = GPIO13
+                    Pin11 = GPIO12
+                    Pin12 = GPIO11
+                    Pin13 = GPIO10
+                    Pin14 = GPIO9
+*/
+
+// NeoPixel
+#define PIN_NEOPIXEL   (16u)
+//#define LED_BUILTIN PIN_NEOPIXEL
+
+// Serial1
+#define PIN_SERIAL1_TX (0u)
+#define PIN_SERIAL1_RX (1u)
+
+#define PIN_SERIAL2_TX (8u)
+#define PIN_SERIAL2_RX (9u)
+
+// SPI
+#define PIN_SPI0_MISO  (4u)
+#define PIN_SPI0_MOSI  (3u)
+#define PIN_SPI0_SCK   (2u)
+#define PIN_SPI0_SS    (5u)
+
+#define PIN_SPI1_MISO  (12u)
+#define PIN_SPI1_MOSI  (15u)
+#define PIN_SPI1_SCK   (14u)
+#define PIN_SPI1_SS    (13u)
+
+// Wire
+#define PIN_WIRE0_SDA  (4u)
+#define PIN_WIRE0_SCL  (5u)
+
+#define PIN_WIRE1_SDA  (26u)
+#define PIN_WIRE1_SCL  (27u)
+  
+#define SERIAL_HOWMANY (2u)
+#define SPI_HOWMANY    (2u)
+#define WIRE_HOWMANY   (2u)
+
+#include "../generic/common.h"