Compare commits
| Author | SHA1 | Date | |
|---|---|---|---|
 majbthrd
|
47a4d9f803 | ||
|
Earle F. Philhower, III
|
e4185ce4ce | ||
|
Earle F. Philhower, III
|
c539742e13 | ||
|
Earle F. Philhower, III
|
ebd2289971 |
@@ -102,8 +102,25 @@ The first line creates a file with the USB vendor and ID of the Picoprobe and te
|
||||
|
||||
Once Picoprobe permissions are set up properly, then select the board "Raspberry Pi Pico (Picoprobe)" in the Tools menu and upload as normal.
|
||||
|
||||
# Debugging with Picoprobe, OpenOCD, and GDB
|
||||
The installed tools include a version of OpenOCD (in the pqt-openocd directory) and GDB (in the pqt-gcc directory). These may be used to run GDB in an interactive window as documented in the Pico Getting Started manuals from the Raspberry Pi Foundation.
|
||||
# Uploading Sketches with pico-debug
|
||||
[pico-debug](https://github.com/majbthrd/pico-debug/) differs from Picoprobe in that pico-debug is a virtual debug pod that runs side-by-side on the same RP2040 that you run your code on; so, you only need one RP2040 board instead of two. pico-debug also differs from Picoprobe in that pico-debug is standards-based; it uses the CMSIS-DAP protocol, which means even software not specially written for the Raspberry Pi Pico can support it. pico-debug uses OpenOCD to handle your sketch uploads, and debugging can be accomplished with CMSIS-DAP capable debuggers including GDB.
|
||||
|
||||
Under Windows and macOS, any user should be able to access pico-debug automatically, but under Linux `udev` must be told about the device and to allow normal users access.
|
||||
|
||||
To set up user-level access to all CMSIS-DAP adapters on Ubuntu (and other OSes which use `udev`):
|
||||
````
|
||||
echo 'ATTRS{product}=="*CMSIS-DAP*", MODE="664", GROUP="plugdev"' | sudo tee -a /etc/udev/rules.d/98-CMSIS-DAP.rules
|
||||
sudo udevadm control --reload
|
||||
````
|
||||
|
||||
The first line creates a file that recognizes all CMSIS-DAP adapters and tells UDEV to give users full access to it. The second causes `udev` to load this new rule. Note that you will need to unplug and re-plug in your device the first time you create this file, to allow udev to make the device node properly.
|
||||
|
||||
Once CMSIS-DAP permissions are set up properly, then select the board "Raspberry Pi Pico (pico-debug)" in the Tools menu.
|
||||
|
||||
When first connecting the USB port to your PC, you must copy [pico-debug-gimmecache.uf2](https://github.com/majbthrd/pico-debug/releases/) to the Pi Pico to load pico-debug into RAM; after this, upload as normal.
|
||||
|
||||
# Debugging with Picoprobe/pico-debug, OpenOCD, and GDB
|
||||
The installed tools include a version of OpenOCD (in the pqt-openocd directory) and GDB (in the pqt-gcc directory). These may be used to run GDB in an interactive window as documented in the Pico Getting Started manuals from the Raspberry Pi Foundation. For [pico-debug](https://github.com/majbthrd/pico-debug/), replace the raspberrypi-swd and picoprobe example OpenOCD arguments of "-f interface/raspberrypi-swd.cfg -f target/rp2040.cfg" or "-f interface/picoprobe.cfg -f target/rp2040.cfg" respectively in the Pico Getting Started manual with "-f board/pico-debug.cfg".
|
||||
|
||||
# Features
|
||||
* Adafruit TinyUSB Arduino (USB mouse, keyboard, flash drive, generic HID, CDC Serial, MIDI, WebUSB, others)
|
||||
|
||||
+1522
File diff suppressed because it is too large
Load Diff
@@ -19,7 +19,7 @@
|
||||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
#ifndef USE_TINYUSB
|
||||
#if !defined(USE_TINYUSB) && !defined(NO_USB)
|
||||
|
||||
#include <Arduino.h>
|
||||
#include "CoreMutex.h"
|
||||
|
||||
@@ -20,7 +20,7 @@
|
||||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
#ifndef USE_TINYUSB
|
||||
#if !defined(USE_TINYUSB) && !defined(NO_USB)
|
||||
|
||||
#include <Arduino.h>
|
||||
#include "CoreMutex.h"
|
||||
|
||||
@@ -61,6 +61,7 @@ extern "C" int main() {
|
||||
mutex_init(&_pioMutex);
|
||||
initVariant();
|
||||
|
||||
#ifndef NO_USB
|
||||
#ifdef USE_TINYUSB
|
||||
TinyUSB_Device_Init(0);
|
||||
|
||||
@@ -72,11 +73,13 @@ extern "C" int main() {
|
||||
Serial.begin(115200);
|
||||
#endif
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if defined DEBUG_RP2040_PORT
|
||||
DEBUG_RP2040_PORT.begin();
|
||||
#endif
|
||||
|
||||
#ifndef NO_USB
|
||||
if (setup1 || loop1) {
|
||||
rp2040.fifo.begin(2);
|
||||
multicore_launch_core1(main1);
|
||||
@@ -84,6 +87,7 @@ extern "C" int main() {
|
||||
rp2040.fifo.begin(1);
|
||||
}
|
||||
rp2040.fifo.registerCore();
|
||||
#endif
|
||||
|
||||
setup();
|
||||
while (true) {
|
||||
|
||||
+22
-3
@@ -135,6 +135,25 @@ The first line creates a file with the USB vendor and ID of the Picoprobe and te
|
||||
|
||||
Once Picoprobe permissions are set up properly, then select the board "Raspberry Pi Pico (Picoprobe)" in the Tools menu and upload as normal.
|
||||
|
||||
Debugging with Picoprobe, OpenOCD, and GDB
|
||||
------------------------------------------
|
||||
The installed tools include a version of OpenOCD (in the pqt-openocd directory) and GDB (in the pqt-gcc directory). These may be used to run GDB in an interactive window as documented in the Pico Getting Started manuals from the Raspberry Pi Foundation.
|
||||
Uploading Sketches with pico-debug
|
||||
----------------------------------
|
||||
pico-debug differs from Picoprobe in that pico-debug is a virtual debug pod that runs side-by-side on the same RP2040 that you run your code on; so, you only need one RP2040 board instead of two. pico-debug also differs from Picoprobe in that pico-debug is standards-based; it uses the CMSIS-DAP protocol, which means even software not specially written for the Raspberry Pi Pico can support it. pico-debug uses OpenOCD to handle your sketch uploads, and debugging can be accomplished with CMSIS-DAP capable debuggers including GDB.
|
||||
|
||||
Under Windows and macOS, any user should be able to access pico-debug automatically, but under Linux `udev` must be told about the device and to allow normal users access.
|
||||
|
||||
To set up user-level access to all CMSIS-DAP adapters on Ubuntu (and other OSes which use `udev`):
|
||||
|
||||
.. code::
|
||||
|
||||
echo 'ATTRS{product}=="*CMSIS-DAP*", MODE="664", GROUP="plugdev"' | sudo tee -a /etc/udev/rules.d/98-CMSIS-DAP.rules
|
||||
sudo udevadm control --reload
|
||||
|
||||
The first line creates a file that recognizes all CMSIS-DAP adapters and tells UDEV to give users full access to it. The second causes `udev` to load this new rule. Note that you will need to unplug and re-plug in your device the first time you create this file, to allow udev to make the device node properly.
|
||||
|
||||
Once CMSIS-DAP permissions are set up properly, then select the board "Raspberry Pi Pico (pico-debug)" in the Tools menu.
|
||||
|
||||
When first connecting the USB port to your PC, you must copy pico-debug-gimmecache.uf2 to the Pi Pico to load pico-debug into RAM; after this, upload as normal.
|
||||
|
||||
Debugging with Picoprobe/pico-debug, OpenOCD, and GDB
|
||||
-----------------------------------------------------
|
||||
The installed tools include a version of OpenOCD (in the pqt-openocd directory) and GDB (in the pqt-gcc directory). These may be used to run GDB in an interactive window as documented in the Pico Getting Started manuals from the Raspberry Pi Foundation. For pico-debug, replace the raspberrypi-swd and picoprobe example OpenOCD arguments of "-f interface/raspberrypi-swd.cfg -f target/rp2040.cfg" or "-f interface/picoprobe.cfg -f target/rp2040.cfg" respectively in the Pico Getting Started manual with "-f board/pico-debug.cfg".
|
||||
|
||||
@@ -24,7 +24,7 @@
|
||||
MEMORY
|
||||
{
|
||||
FLASH(rx) : ORIGIN = 0x10000000, LENGTH = __FLASH_LENGTH__
|
||||
RAM(rwx) : ORIGIN = 0x20000000, LENGTH = 256k
|
||||
RAM(rwx) : ORIGIN = 0x20000000, LENGTH = __RAM_LENGTH__
|
||||
SCRATCH_X(rwx) : ORIGIN = 0x20040000, LENGTH = 4k
|
||||
SCRATCH_Y(rwx) : ORIGIN = 0x20041000, LENGTH = 4k
|
||||
}
|
||||
|
||||
@@ -51,22 +51,22 @@
|
||||
"toolsDependencies": [
|
||||
{
|
||||
"packager": "rp2040",
|
||||
"version": "1.3.0-a-dcbbdf3",
|
||||
"version": "1.3.1-a-7855b0c",
|
||||
"name": "pqt-gcc"
|
||||
},
|
||||
{
|
||||
"packager": "rp2040",
|
||||
"version": "1.3.0-a-dcbbdf3",
|
||||
"version": "1.3.1-a-7855b0c",
|
||||
"name": "pqt-mklittlefs"
|
||||
},
|
||||
{
|
||||
"packager": "rp2040",
|
||||
"version": "1.3.0-a-dcbbdf3",
|
||||
"version": "1.3.1-a-7855b0c",
|
||||
"name": "pqt-elf2uf2"
|
||||
},
|
||||
{
|
||||
"packager": "rp2040",
|
||||
"version": "1.3.0-a-dcbbdf3",
|
||||
"version": "1.3.1-a-7855b0c",
|
||||
"name": "pqt-pioasm"
|
||||
},
|
||||
{
|
||||
@@ -76,7 +76,7 @@
|
||||
},
|
||||
{
|
||||
"packager": "rp2040",
|
||||
"version": "1.3.0-a-dcbbdf3",
|
||||
"version": "1.3.1-a-7855b0c",
|
||||
"name": "pqt-openocd"
|
||||
}
|
||||
],
|
||||
@@ -87,57 +87,57 @@
|
||||
],
|
||||
"tools": [
|
||||
{
|
||||
"version": "1.3.0-a-dcbbdf3",
|
||||
"version": "1.3.1-a-7855b0c",
|
||||
"name": "pqt-openocd",
|
||||
"systems": [
|
||||
{
|
||||
"host": "aarch64-linux-gnu",
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.0-a/aarch64-linux-gnu.openocd-d58c2ef5e.210629.tar.gz",
|
||||
"archiveFileName": "aarch64-linux-gnu.openocd-d58c2ef5e.210629.tar.gz",
|
||||
"checksum": "SHA-256:d9a0a6ce88c79404c5d7ba1d4b2d609290ac87833a2ef6ae3faea9e6ca16b822",
|
||||
"size": "6144945"
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.1-a/aarch64-linux-gnu.openocd-e3428fadb.210706.tar.gz",
|
||||
"archiveFileName": "aarch64-linux-gnu.openocd-e3428fadb.210706.tar.gz",
|
||||
"checksum": "SHA-256:62662b74a7cbbb5db0998987585d74a3261c3e6f0c1440d7449505832020e095",
|
||||
"size": "6224364"
|
||||
},
|
||||
{
|
||||
"host": "arm-linux-gnueabihf",
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.0-a/arm-linux-gnueabihf.openocd-d58c2ef5e.210629.tar.gz",
|
||||
"archiveFileName": "arm-linux-gnueabihf.openocd-d58c2ef5e.210629.tar.gz",
|
||||
"checksum": "SHA-256:f7b081481588b4667f0f0b168700fc42c1c3b311552b33f41a3c6f963b64db24",
|
||||
"size": "5849230"
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.1-a/arm-linux-gnueabihf.openocd-e3428fadb.210706.tar.gz",
|
||||
"archiveFileName": "arm-linux-gnueabihf.openocd-e3428fadb.210706.tar.gz",
|
||||
"checksum": "SHA-256:15b188279382ee182253984ed45785f3a15387576583a1c6bff2c71d724ff76a",
|
||||
"size": "5931976"
|
||||
},
|
||||
{
|
||||
"host": "i686-pc-linux-gnu",
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.0-a/i686-linux-gnu.openocd-d58c2ef5e.210629.tar.gz",
|
||||
"archiveFileName": "i686-linux-gnu.openocd-d58c2ef5e.210629.tar.gz",
|
||||
"checksum": "SHA-256:89b5d50666a1c09ce4185e4e3cb78ea37cb2ad63b9bfecd5fb59931df509c259",
|
||||
"size": "5652248"
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.1-a/i686-linux-gnu.openocd-e3428fadb.210706.tar.gz",
|
||||
"archiveFileName": "i686-linux-gnu.openocd-e3428fadb.210706.tar.gz",
|
||||
"checksum": "SHA-256:40a7a417b46875b2ccff582309b0e8ffcfd5c038ad1dc1775d53c683708c363c",
|
||||
"size": "5728004"
|
||||
},
|
||||
{
|
||||
"host": "i686-mingw32",
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.0-a/i686-w64-mingw32.openocd-d58c2ef5e.210629.zip",
|
||||
"archiveFileName": "i686-w64-mingw32.openocd-d58c2ef5e.210629.zip",
|
||||
"checksum": "SHA-256:d34be5086922645a31514409b96485c93fe19e117b2368f17ed610bf8ef91e14",
|
||||
"size": "8330282"
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.1-a/i686-w64-mingw32.openocd-e3428fadb.210706.zip",
|
||||
"archiveFileName": "i686-w64-mingw32.openocd-e3428fadb.210706.zip",
|
||||
"checksum": "SHA-256:945cf4b0de879b935e05af2f438a6964949fbbf6d163e96e507939c55cafbff0",
|
||||
"size": "8539935"
|
||||
},
|
||||
{
|
||||
"host": "x86_64-apple-darwin",
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.0-a/x86_64-apple-darwin14.openocd-d58c2ef5e.210629.tar.gz",
|
||||
"archiveFileName": "x86_64-apple-darwin14.openocd-d58c2ef5e.210629.tar.gz",
|
||||
"checksum": "SHA-256:00bd4f654db0cef007502cc13e74e29935e9e18ee991826d3d0617672b6bc8e9",
|
||||
"size": "1981800"
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.1-a/x86_64-apple-darwin14.openocd-e3428fadb.210706.tar.gz",
|
||||
"archiveFileName": "x86_64-apple-darwin14.openocd-e3428fadb.210706.tar.gz",
|
||||
"checksum": "SHA-256:b28b54580b16e6d7f0229a653acf68aeab8cc3270d8b9dcaf178b8b8c0aafcb7",
|
||||
"size": "2006182"
|
||||
},
|
||||
{
|
||||
"host": "x86_64-pc-linux-gnu",
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.0-a/x86_64-linux-gnu.openocd-d58c2ef5e.210629.tar.gz",
|
||||
"archiveFileName": "x86_64-linux-gnu.openocd-d58c2ef5e.210629.tar.gz",
|
||||
"checksum": "SHA-256:0b3107a21c8268db2ce208e3b4f2dbe481907a989e651ef57713660a4680b8ba",
|
||||
"size": "6076502"
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.1-a/x86_64-linux-gnu.openocd-e3428fadb.210706.tar.gz",
|
||||
"archiveFileName": "x86_64-linux-gnu.openocd-e3428fadb.210706.tar.gz",
|
||||
"checksum": "SHA-256:90aec3a7818697e04e798a0470133caf62e7583a48f7ae3848b9b536c3180b0b",
|
||||
"size": "6154827"
|
||||
},
|
||||
{
|
||||
"host": "x86_64-mingw32",
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.0-a/x86_64-w64-mingw32.openocd-d58c2ef5e.210629.zip",
|
||||
"archiveFileName": "x86_64-w64-mingw32.openocd-d58c2ef5e.210629.zip",
|
||||
"checksum": "SHA-256:665b6723c515619d6b07653c90e807065f36f29baa1cfc6fef50f9bd91fb2c64",
|
||||
"size": "8719677"
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.1-a/x86_64-w64-mingw32.openocd-e3428fadb.210706.zip",
|
||||
"archiveFileName": "x86_64-w64-mingw32.openocd-e3428fadb.210706.zip",
|
||||
"checksum": "SHA-256:86e0341d50723d5e0c2969a903e911273e3b70ed5b794284b7d7ec7a1f09ee2f",
|
||||
"size": "8929726"
|
||||
}
|
||||
]
|
||||
},
|
||||
@@ -204,221 +204,221 @@
|
||||
]
|
||||
},
|
||||
{
|
||||
"version": "1.3.0-a-dcbbdf3",
|
||||
"version": "1.3.1-a-7855b0c",
|
||||
"name": "pqt-gcc",
|
||||
"systems": [
|
||||
{
|
||||
"host": "aarch64-linux-gnu",
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.0-a/aarch64-linux-gnu.arm-none-eabi-dcbbdf3.210629.tar.gz",
|
||||
"archiveFileName": "aarch64-linux-gnu.arm-none-eabi-dcbbdf3.210629.tar.gz",
|
||||
"checksum": "SHA-256:79b3c736bd96c65d33f15cbde535619b4f32987c6cc47d0efe6ac71e1ff001e0",
|
||||
"size": "103183564"
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.1-a/aarch64-linux-gnu.arm-none-eabi-7855b0c.210706.tar.gz",
|
||||
"archiveFileName": "aarch64-linux-gnu.arm-none-eabi-7855b0c.210706.tar.gz",
|
||||
"checksum": "SHA-256:32f2a28e0f12bd1c8aaefa10bc2646f0f058b77d0030bec3e1e0ec89409d2380",
|
||||
"size": "103186082"
|
||||
},
|
||||
{
|
||||
"host": "arm-linux-gnueabihf",
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.0-a/arm-linux-gnueabihf.arm-none-eabi-dcbbdf3.210629.tar.gz",
|
||||
"archiveFileName": "arm-linux-gnueabihf.arm-none-eabi-dcbbdf3.210629.tar.gz",
|
||||
"checksum": "SHA-256:6a2752cf94d5b237ef63d44205acab97e9e87106cd5ee28b19b9bfe54b29a9b7",
|
||||
"size": "95859242"
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.1-a/arm-linux-gnueabihf.arm-none-eabi-7855b0c.210706.tar.gz",
|
||||
"archiveFileName": "arm-linux-gnueabihf.arm-none-eabi-7855b0c.210706.tar.gz",
|
||||
"checksum": "SHA-256:0cca5b4c429acf26eeb093bf21b16c2265fd6c04aafe91ceb304dfee35a662d7",
|
||||
"size": "95859088"
|
||||
},
|
||||
{
|
||||
"host": "i686-pc-linux-gnu",
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.0-a/i686-linux-gnu.arm-none-eabi-dcbbdf3.210629.tar.gz",
|
||||
"archiveFileName": "i686-linux-gnu.arm-none-eabi-dcbbdf3.210629.tar.gz",
|
||||
"checksum": "SHA-256:8917a4bd123374bc406db02e13cd609741b194a8e9471dc3e6dc52d712394b00",
|
||||
"size": "105959297"
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.1-a/i686-linux-gnu.arm-none-eabi-7855b0c.210706.tar.gz",
|
||||
"archiveFileName": "i686-linux-gnu.arm-none-eabi-7855b0c.210706.tar.gz",
|
||||
"checksum": "SHA-256:9a1ba7cdcb11d817ddbcb60d53f5b804b787a7a3c2e0bc5a33e86b8bbf653391",
|
||||
"size": "105956199"
|
||||
},
|
||||
{
|
||||
"host": "i686-mingw32",
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.0-a/i686-w64-mingw32.arm-none-eabi-dcbbdf3.210629.zip",
|
||||
"archiveFileName": "i686-w64-mingw32.arm-none-eabi-dcbbdf3.210629.zip",
|
||||
"checksum": "SHA-256:2305fa29b39a20788dbc7e53dc01bfb57c4a8bd9aec55183c5d99fca5a4d3f72",
|
||||
"size": "105494605"
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.1-a/i686-w64-mingw32.arm-none-eabi-7855b0c.210706.zip",
|
||||
"archiveFileName": "i686-w64-mingw32.arm-none-eabi-7855b0c.210706.zip",
|
||||
"checksum": "SHA-256:5b06d0dcfcf78c83b85aadbcbd8b6e3301b60acd14d6319e066e125586331aac",
|
||||
"size": "105493451"
|
||||
},
|
||||
{
|
||||
"host": "x86_64-apple-darwin",
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.0-a/x86_64-apple-darwin14.arm-none-eabi-dcbbdf3.210629.tar.gz",
|
||||
"archiveFileName": "x86_64-apple-darwin14.arm-none-eabi-dcbbdf3.210629.tar.gz",
|
||||
"checksum": "SHA-256:f54570bb6458fb7188848bf87348ec8778f6538b4a44a0b48005be55aa745c73",
|
||||
"size": "107367132"
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.1-a/x86_64-apple-darwin14.arm-none-eabi-7855b0c.210706.tar.gz",
|
||||
"archiveFileName": "x86_64-apple-darwin14.arm-none-eabi-7855b0c.210706.tar.gz",
|
||||
"checksum": "SHA-256:6d4dfd0e032df43687683504b747a0010cea53b2d86f4662f72997fd0cbd8b1a",
|
||||
"size": "107371801"
|
||||
},
|
||||
{
|
||||
"host": "x86_64-pc-linux-gnu",
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.0-a/x86_64-linux-gnu.arm-none-eabi-dcbbdf3.210629.tar.gz",
|
||||
"archiveFileName": "x86_64-linux-gnu.arm-none-eabi-dcbbdf3.210629.tar.gz",
|
||||
"checksum": "SHA-256:c5f50f97bb71fedc625c0a1dabc032ac904a1fedf6a62e07c3f4e4d2aa7fcafa",
|
||||
"size": "107843709"
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.1-a/x86_64-linux-gnu.arm-none-eabi-7855b0c.210706.tar.gz",
|
||||
"archiveFileName": "x86_64-linux-gnu.arm-none-eabi-7855b0c.210706.tar.gz",
|
||||
"checksum": "SHA-256:791b6386a6b6742d627af3277f401db7bb2b407852c8b3f49eaee30fcc5ceb8a",
|
||||
"size": "107845636"
|
||||
},
|
||||
{
|
||||
"host": "x86_64-mingw32",
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.0-a/x86_64-w64-mingw32.arm-none-eabi-dcbbdf3.210629.zip",
|
||||
"archiveFileName": "x86_64-w64-mingw32.arm-none-eabi-dcbbdf3.210629.zip",
|
||||
"checksum": "SHA-256:de391b7daf0670c202e6187c476f1f46f46cc509b2e70cbeb902ce1ab4aeaf40",
|
||||
"size": "110344690"
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.1-a/x86_64-w64-mingw32.arm-none-eabi-7855b0c.210706.zip",
|
||||
"archiveFileName": "x86_64-w64-mingw32.arm-none-eabi-7855b0c.210706.zip",
|
||||
"checksum": "SHA-256:7f8b591902e9f164904974bb8224808371b025affaf7cbffdeb3f3ff259b9464",
|
||||
"size": "110342777"
|
||||
}
|
||||
]
|
||||
},
|
||||
{
|
||||
"version": "1.3.0-a-dcbbdf3",
|
||||
"version": "1.3.1-a-7855b0c",
|
||||
"name": "pqt-elf2uf2",
|
||||
"systems": [
|
||||
{
|
||||
"host": "aarch64-linux-gnu",
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.0-a/aarch64-linux-gnu.elf2uf2-fc10a97.210629.tar.gz",
|
||||
"archiveFileName": "aarch64-linux-gnu.elf2uf2-fc10a97.210629.tar.gz",
|
||||
"checksum": "SHA-256:b74fd40954e4127ca752dd3eeac62d9a8611ba0597cf9e7fa29dd7f0247d9ff4",
|
||||
"size": "79837"
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.1-a/aarch64-linux-gnu.elf2uf2-fc10a97.210706.tar.gz",
|
||||
"archiveFileName": "aarch64-linux-gnu.elf2uf2-fc10a97.210706.tar.gz",
|
||||
"checksum": "SHA-256:3c67eb63da563c505dd046cd069aee1754ff735e9d0d7dacfd8b003a85a078ca",
|
||||
"size": "79842"
|
||||
},
|
||||
{
|
||||
"host": "arm-linux-gnueabihf",
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.0-a/arm-linux-gnueabihf.elf2uf2-fc10a97.210629.tar.gz",
|
||||
"archiveFileName": "arm-linux-gnueabihf.elf2uf2-fc10a97.210629.tar.gz",
|
||||
"checksum": "SHA-256:1a012e9f6339e7ffabc918894208ad6830060e2ee2f312f0e2130ab992aa0279",
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.1-a/arm-linux-gnueabihf.elf2uf2-fc10a97.210706.tar.gz",
|
||||
"archiveFileName": "arm-linux-gnueabihf.elf2uf2-fc10a97.210706.tar.gz",
|
||||
"checksum": "SHA-256:62457fc90b0993d720a3523537e8d55e9378769db1595709ff01357ebc13a3dd",
|
||||
"size": "54219"
|
||||
},
|
||||
{
|
||||
"host": "i686-pc-linux-gnu",
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.0-a/i686-linux-gnu.elf2uf2-fc10a97.210629.tar.gz",
|
||||
"archiveFileName": "i686-linux-gnu.elf2uf2-fc10a97.210629.tar.gz",
|
||||
"checksum": "SHA-256:9cfce083d4932a0ea730cac64badd8ec80c2335f4cd4f930056e4162d215196a",
|
||||
"size": "87880"
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.1-a/i686-linux-gnu.elf2uf2-fc10a97.210706.tar.gz",
|
||||
"archiveFileName": "i686-linux-gnu.elf2uf2-fc10a97.210706.tar.gz",
|
||||
"checksum": "SHA-256:59e83f09322a2a292c20a4852512aa8c086b5b0d02842e11dfb9cb122485fb84",
|
||||
"size": "87881"
|
||||
},
|
||||
{
|
||||
"host": "i686-mingw32",
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.0-a/i686-w64-mingw32.elf2uf2-fc10a97.210629.zip",
|
||||
"archiveFileName": "i686-w64-mingw32.elf2uf2-fc10a97.210629.zip",
|
||||
"checksum": "SHA-256:c7163edfdd6f14fa2dc96aad97cc29f84c495748ef7d57cfe921662c635d33d6",
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.1-a/i686-w64-mingw32.elf2uf2-fc10a97.210706.zip",
|
||||
"archiveFileName": "i686-w64-mingw32.elf2uf2-fc10a97.210706.zip",
|
||||
"checksum": "SHA-256:2b7c676fa0ff8a7fb6638dfe770787e6bdd9c6cd2f5a0d86f8c64c267a9bc328",
|
||||
"size": "70429"
|
||||
},
|
||||
{
|
||||
"host": "x86_64-apple-darwin",
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.0-a/x86_64-apple-darwin14.elf2uf2-fc10a97.210629.tar.gz",
|
||||
"archiveFileName": "x86_64-apple-darwin14.elf2uf2-fc10a97.210629.tar.gz",
|
||||
"checksum": "SHA-256:429803b74f3eff4be4dcb049d458fce1c1f147cf5365b2157b71323d59aae0f6",
|
||||
"size": "81920"
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.1-a/x86_64-apple-darwin14.elf2uf2-fc10a97.210706.tar.gz",
|
||||
"archiveFileName": "x86_64-apple-darwin14.elf2uf2-fc10a97.210706.tar.gz",
|
||||
"checksum": "SHA-256:1154dd7bb3186bb66b8b53699d29083a688564ace502f28cf53cf9f15214d816",
|
||||
"size": "81919"
|
||||
},
|
||||
{
|
||||
"host": "x86_64-pc-linux-gnu",
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.0-a/x86_64-linux-gnu.elf2uf2-fc10a97.210629.tar.gz",
|
||||
"archiveFileName": "x86_64-linux-gnu.elf2uf2-fc10a97.210629.tar.gz",
|
||||
"checksum": "SHA-256:15456283b3a55065546a2519fbca65aecdabc0d106dd3115318c4c77aba4637a",
|
||||
"size": "79515"
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.1-a/x86_64-linux-gnu.elf2uf2-fc10a97.210706.tar.gz",
|
||||
"archiveFileName": "x86_64-linux-gnu.elf2uf2-fc10a97.210706.tar.gz",
|
||||
"checksum": "SHA-256:0ed4a2a3973ee2e7a5edc4932bd2485ac0825750b72fabdb8a96e8d274dc30a4",
|
||||
"size": "79516"
|
||||
},
|
||||
{
|
||||
"host": "x86_64-mingw32",
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.0-a/x86_64-w64-mingw32.elf2uf2-fc10a97.210629.zip",
|
||||
"archiveFileName": "x86_64-w64-mingw32.elf2uf2-fc10a97.210629.zip",
|
||||
"checksum": "SHA-256:bfe82c2e32931ae79aebae938f3cc76eebd69a9898eecd326ab49771586ee31b",
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.1-a/x86_64-w64-mingw32.elf2uf2-fc10a97.210706.zip",
|
||||
"archiveFileName": "x86_64-w64-mingw32.elf2uf2-fc10a97.210706.zip",
|
||||
"checksum": "SHA-256:81c3c458fda68840439afc7b16133febb21e023a910924761abaee9c011a44db",
|
||||
"size": "78298"
|
||||
}
|
||||
]
|
||||
},
|
||||
{
|
||||
"version": "1.3.0-a-dcbbdf3",
|
||||
"version": "1.3.1-a-7855b0c",
|
||||
"name": "pqt-pioasm",
|
||||
"systems": [
|
||||
{
|
||||
"host": "aarch64-linux-gnu",
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.0-a/aarch64-linux-gnu.pioasm-fc10a97.210629.tar.gz",
|
||||
"archiveFileName": "aarch64-linux-gnu.pioasm-fc10a97.210629.tar.gz",
|
||||
"checksum": "SHA-256:140a0b05a23c4cc22dc26e27e2b506ab6cd523ba62410d809f6bd7919dc8b63f",
|
||||
"size": "453301"
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.1-a/aarch64-linux-gnu.pioasm-fc10a97.210706.tar.gz",
|
||||
"archiveFileName": "aarch64-linux-gnu.pioasm-fc10a97.210706.tar.gz",
|
||||
"checksum": "SHA-256:bbc6735939ffab312e700b687c29ecf7873564cec9028588c39b7be5a5b18ba3",
|
||||
"size": "453297"
|
||||
},
|
||||
{
|
||||
"host": "arm-linux-gnueabihf",
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.0-a/arm-linux-gnueabihf.pioasm-fc10a97.210629.tar.gz",
|
||||
"archiveFileName": "arm-linux-gnueabihf.pioasm-fc10a97.210629.tar.gz",
|
||||
"checksum": "SHA-256:03baa86ea7224f68ed511ee898ddca9ba9c8f4c2871e3f335d96fd530e5368b0",
|
||||
"size": "360371"
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.1-a/arm-linux-gnueabihf.pioasm-fc10a97.210706.tar.gz",
|
||||
"archiveFileName": "arm-linux-gnueabihf.pioasm-fc10a97.210706.tar.gz",
|
||||
"checksum": "SHA-256:9390b87fa87fa03d1033cf75624c0dd3d2acd7b2d794f5ab91a800ffb7546a17",
|
||||
"size": "360370"
|
||||
},
|
||||
{
|
||||
"host": "i686-pc-linux-gnu",
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.0-a/i686-linux-gnu.pioasm-fc10a97.210629.tar.gz",
|
||||
"archiveFileName": "i686-linux-gnu.pioasm-fc10a97.210629.tar.gz",
|
||||
"checksum": "SHA-256:11103b95e201838e5029093628c4c91b10373d9eea46c1cee25d290ecfc02c9a",
|
||||
"size": "511404"
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.1-a/i686-linux-gnu.pioasm-fc10a97.210706.tar.gz",
|
||||
"archiveFileName": "i686-linux-gnu.pioasm-fc10a97.210706.tar.gz",
|
||||
"checksum": "SHA-256:a84e7389c5e959a409b6ce8b1150fad7641fad4ac55c129888439f33c5bfb7cc",
|
||||
"size": "511409"
|
||||
},
|
||||
{
|
||||
"host": "i686-mingw32",
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.0-a/i686-w64-mingw32.pioasm-fc10a97.210629.zip",
|
||||
"archiveFileName": "i686-w64-mingw32.pioasm-fc10a97.210629.zip",
|
||||
"checksum": "SHA-256:17fad1fadcb75c894b772c905a63eea333851f9ea94efb453919a621fb3da35b",
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.1-a/i686-w64-mingw32.pioasm-fc10a97.210706.zip",
|
||||
"archiveFileName": "i686-w64-mingw32.pioasm-fc10a97.210706.zip",
|
||||
"checksum": "SHA-256:d1f1e34bd6e4b32301f3e7b147a9eb6710c2b52f816288a11e9aeb619f242355",
|
||||
"size": "385662"
|
||||
},
|
||||
{
|
||||
"host": "x86_64-apple-darwin",
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.0-a/x86_64-apple-darwin14.pioasm-fc10a97.210629.tar.gz",
|
||||
"archiveFileName": "x86_64-apple-darwin14.pioasm-fc10a97.210629.tar.gz",
|
||||
"checksum": "SHA-256:1be95af2db352f24cf38831d317e68a8f88a01edce36a8cced65dd76e4a2ddd2",
|
||||
"size": "480402"
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.1-a/x86_64-apple-darwin14.pioasm-fc10a97.210706.tar.gz",
|
||||
"archiveFileName": "x86_64-apple-darwin14.pioasm-fc10a97.210706.tar.gz",
|
||||
"checksum": "SHA-256:f9cb3bf99c84221b8c63d95dd22bbd1cc1ba40bd847530819392ee047962571e",
|
||||
"size": "480405"
|
||||
},
|
||||
{
|
||||
"host": "x86_64-pc-linux-gnu",
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.0-a/x86_64-linux-gnu.pioasm-fc10a97.210629.tar.gz",
|
||||
"archiveFileName": "x86_64-linux-gnu.pioasm-fc10a97.210629.tar.gz",
|
||||
"checksum": "SHA-256:326868dd7bf2d2656b8b158c07435a43f323ca745e219a3fe72390ff68ba4d35",
|
||||
"size": "458627"
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.1-a/x86_64-linux-gnu.pioasm-fc10a97.210706.tar.gz",
|
||||
"archiveFileName": "x86_64-linux-gnu.pioasm-fc10a97.210706.tar.gz",
|
||||
"checksum": "SHA-256:96721566a97f07cbe4af3a1d80d63336a75b129a7cb821a407260d250666a30f",
|
||||
"size": "458641"
|
||||
},
|
||||
{
|
||||
"host": "x86_64-mingw32",
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.0-a/x86_64-w64-mingw32.pioasm-fc10a97.210629.zip",
|
||||
"archiveFileName": "x86_64-w64-mingw32.pioasm-fc10a97.210629.zip",
|
||||
"checksum": "SHA-256:96f5cd1fec43876ebf4e756ac89692354abcfa8587bf1861b0050b7373171ab0",
|
||||
"size": "408342"
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.1-a/x86_64-w64-mingw32.pioasm-fc10a97.210706.zip",
|
||||
"archiveFileName": "x86_64-w64-mingw32.pioasm-fc10a97.210706.zip",
|
||||
"checksum": "SHA-256:15fe69c11ad86ddf78c1ee26610b8b0f9d4a2323af13854e8e6b5e20d5a6fff5",
|
||||
"size": "408341"
|
||||
}
|
||||
]
|
||||
},
|
||||
{
|
||||
"version": "1.3.0-a-dcbbdf3",
|
||||
"version": "1.3.1-a-7855b0c",
|
||||
"name": "pqt-mklittlefs",
|
||||
"systems": [
|
||||
{
|
||||
"host": "aarch64-linux-gnu",
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.0-a/aarch64-linux-gnu.mklittlefs-6b5c62d.210629.tar.gz",
|
||||
"archiveFileName": "aarch64-linux-gnu.mklittlefs-6b5c62d.210629.tar.gz",
|
||||
"checksum": "SHA-256:c2de6ba23e4c2b010b82f1ae8acd7714566be20f9de41fd6beb54769631207bc",
|
||||
"size": "44789"
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.1-a/aarch64-linux-gnu.mklittlefs-6b5c62d.210706.tar.gz",
|
||||
"archiveFileName": "aarch64-linux-gnu.mklittlefs-6b5c62d.210706.tar.gz",
|
||||
"checksum": "SHA-256:3b318dbefd8ac36b3f1531d14d018d7aaad26b4f7f259a3a0c116939e74c76f6",
|
||||
"size": "44788"
|
||||
},
|
||||
{
|
||||
"host": "arm-linux-gnueabihf",
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.0-a/arm-linux-gnueabihf.mklittlefs-6b5c62d.210629.tar.gz",
|
||||
"archiveFileName": "arm-linux-gnueabihf.mklittlefs-6b5c62d.210629.tar.gz",
|
||||
"checksum": "SHA-256:3c95dc7daf344cc8dd247ac38178b4d40791023e76bc523c580355ccc36410e0",
|
||||
"size": "38246"
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.1-a/arm-linux-gnueabihf.mklittlefs-6b5c62d.210706.tar.gz",
|
||||
"archiveFileName": "arm-linux-gnueabihf.mklittlefs-6b5c62d.210706.tar.gz",
|
||||
"checksum": "SHA-256:2b67c6ab2d6fd7239944963beeca0664f85fbffb7b68bcf9eaa7c64e81cad7a5",
|
||||
"size": "38247"
|
||||
},
|
||||
{
|
||||
"host": "i686-pc-linux-gnu",
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.0-a/i686-linux-gnu.mklittlefs-6b5c62d.210629.tar.gz",
|
||||
"archiveFileName": "i686-linux-gnu.mklittlefs-6b5c62d.210629.tar.gz",
|
||||
"checksum": "SHA-256:409cb1d8c0cc0866eae1c421e707b74af1dc2e0147ec802be545c268d5b74f5f",
|
||||
"size": "48240"
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.1-a/i686-linux-gnu.mklittlefs-6b5c62d.210706.tar.gz",
|
||||
"archiveFileName": "i686-linux-gnu.mklittlefs-6b5c62d.210706.tar.gz",
|
||||
"checksum": "SHA-256:791f12a6969e3b78d13e4355b7977a49e5b567261499451a10ce0781a7d08d70",
|
||||
"size": "48237"
|
||||
},
|
||||
{
|
||||
"host": "i686-mingw32",
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.0-a/i686-w64-mingw32.mklittlefs-6b5c62d.210629.zip",
|
||||
"archiveFileName": "i686-w64-mingw32.mklittlefs-6b5c62d.210629.zip",
|
||||
"checksum": "SHA-256:ef5d5a3460ffe4da9e9365ec446994af9b6e98a998ee55e0347e0ee7ffddb477",
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.1-a/i686-w64-mingw32.mklittlefs-6b5c62d.210706.zip",
|
||||
"archiveFileName": "i686-w64-mingw32.mklittlefs-6b5c62d.210706.zip",
|
||||
"checksum": "SHA-256:a5bf0308b8f279f5e06c2b5f24f6843d934046ceba84fd7ed5c44ba682b770c4",
|
||||
"size": "332804"
|
||||
},
|
||||
{
|
||||
"host": "x86_64-apple-darwin",
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.0-a/x86_64-apple-darwin14.mklittlefs-6b5c62d.210629.tar.gz",
|
||||
"archiveFileName": "x86_64-apple-darwin14.mklittlefs-6b5c62d.210629.tar.gz",
|
||||
"checksum": "SHA-256:935e7e4f6bbce45ef7b81fc65147bebd0eab721bab6586e5ec85191b5dc5554c",
|
||||
"size": "362809"
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.1-a/x86_64-apple-darwin14.mklittlefs-6b5c62d.210706.tar.gz",
|
||||
"archiveFileName": "x86_64-apple-darwin14.mklittlefs-6b5c62d.210706.tar.gz",
|
||||
"checksum": "SHA-256:e5dd89a7a4ffe494440975ec511cdf24d5978da07a9bff96429a48ad0a7054e7",
|
||||
"size": "362810"
|
||||
},
|
||||
{
|
||||
"host": "x86_64-pc-linux-gnu",
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.0-a/x86_64-linux-gnu.mklittlefs-6b5c62d.210629.tar.gz",
|
||||
"archiveFileName": "x86_64-linux-gnu.mklittlefs-6b5c62d.210629.tar.gz",
|
||||
"checksum": "SHA-256:08dec87132551095db36d87fbb68b1c04f0c257ddf0af4604eef7fddee584a50",
|
||||
"size": "46913"
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.1-a/x86_64-linux-gnu.mklittlefs-6b5c62d.210706.tar.gz",
|
||||
"archiveFileName": "x86_64-linux-gnu.mklittlefs-6b5c62d.210706.tar.gz",
|
||||
"checksum": "SHA-256:f1e3b374c66811bfe07997b12b6cb318c58ac84973c46e6887553aea13276884",
|
||||
"size": "46915"
|
||||
},
|
||||
{
|
||||
"host": "x86_64-mingw32",
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.0-a/x86_64-w64-mingw32.mklittlefs-6b5c62d.210629.zip",
|
||||
"archiveFileName": "x86_64-w64-mingw32.mklittlefs-6b5c62d.210629.zip",
|
||||
"checksum": "SHA-256:f6868bfa19bc96d388ffacaf342017a7c56d5e1140bd16e876f21b6e013e304c",
|
||||
"url": "https://github.com/earlephilhower/pico-quick-toolchain/releases/download/1.3.1-a/x86_64-w64-mingw32.mklittlefs-6b5c62d.210706.zip",
|
||||
"archiveFileName": "x86_64-w64-mingw32.mklittlefs-6b5c62d.210706.zip",
|
||||
"checksum": "SHA-256:f5d69785c0bb5397eb49cccaa23dd131d32ab013e1124e38c15f758ded799fdb",
|
||||
"size": "345250"
|
||||
}
|
||||
]
|
||||
|
||||
+16
-10
@@ -32,11 +32,11 @@ compiler.path={runtime.tools.pqt-gcc.path}/bin/
|
||||
# Compile variables
|
||||
# -----------------
|
||||
|
||||
compiler.warning_flags=-w
|
||||
compiler.warning_flags.none=-w
|
||||
compiler.warning_flags.default=
|
||||
compiler.warning_flags.more=-Wall
|
||||
compiler.warning_flags.all=-Wall -Wextra
|
||||
compiler.warning_flags=-Werror=return-type
|
||||
compiler.warning_flags.none=-Werror=return-type
|
||||
compiler.warning_flags.default=-Werror=return-type
|
||||
compiler.warning_flags.more=-Wall -Werror=return-type -Wno-ignored-qualifiers
|
||||
compiler.warning_flags.all=-Wall -Wextra -Werror=return-type -Wno-ignored-qualifiers
|
||||
|
||||
compiler.defines={build.led} {build.usbstack_flags} -DCFG_TUSB_MCU=OPT_MCU_RP2040 -DUSB_VID={build.vid} -DUSB_PID={build.pid} '-DUSB_MANUFACTURER={build.usb_manufacturer}' '-DUSB_PRODUCT={build.usb_product}'
|
||||
compiler.includes="-iprefix{runtime.platform.path}/" "@{runtime.platform.path}/lib/platform_inc.txt"
|
||||
@@ -45,13 +45,13 @@ compiler.wrap="@{runtime.platform.path}/lib/platform_wrap.txt"
|
||||
compiler.libpico="{runtime.platform.path}/lib/libpico.a"
|
||||
|
||||
compiler.c.cmd=arm-none-eabi-gcc
|
||||
compiler.c.flags=-c {compiler.defines} {compiler.flags} {compiler.includes} -std=gnu17 -g
|
||||
compiler.c.flags=-c {compiler.warning_flags} {compiler.defines} {compiler.flags} {compiler.includes} -std=gnu17 -g
|
||||
compiler.c.elf.cmd=arm-none-eabi-g++
|
||||
compiler.c.elf.flags={compiler.defines} {compiler.flags} -u _printf_float -u _scanf_float
|
||||
compiler.c.elf.flags={compiler.warning_flags} {compiler.defines} {compiler.flags} -u _printf_float -u _scanf_float
|
||||
compiler.S.cmd=arm-none-eabi-gcc
|
||||
compiler.S.flags=-c -g -x assembler-with-cpp -MMD {compiler.includes} -g
|
||||
compiler.S.flags=-c {compiler.warning_flags} -g -x assembler-with-cpp -MMD {compiler.includes} -g
|
||||
compiler.cpp.cmd=arm-none-eabi-g++
|
||||
compiler.cpp.flags=-c {compiler.defines} {compiler.flags} {compiler.includes} -fno-rtti -std=gnu++17 -g
|
||||
compiler.cpp.flags=-c {compiler.warning_flags} {compiler.defines} {compiler.flags} {compiler.includes} -fno-rtti -std=gnu++17 -g
|
||||
|
||||
compiler.ar.cmd=arm-none-eabi-ar
|
||||
compiler.ar.flags=rcs
|
||||
@@ -107,7 +107,7 @@ archive_file_path={build.path}/{archive_file}
|
||||
recipe.ar.pattern="{compiler.path}{compiler.ar.cmd}" {compiler.ar.flags} {compiler.ar.extra_flags} "{archive_file_path}" "{object_file}"
|
||||
|
||||
## Generate the linker map with specific flash sizes/locations
|
||||
recipe.hooks.linking.prelink.1.pattern="{runtime.tools.pqt-python3.path}/python3" "{runtime.platform.path}/tools/simplesub.py" --input "{runtime.platform.path}/lib/memmap_default.ld" --out "{build.path}/memmap_default.ld" --sub __FLASH_LENGTH__ {build.flash_length} --sub __EEPROM_START__ {build.eeprom_start} --sub __FS_START__ {build.fs_start} --sub __FS_END__ {build.fs_end}
|
||||
recipe.hooks.linking.prelink.1.pattern="{runtime.tools.pqt-python3.path}/python3" "{runtime.platform.path}/tools/simplesub.py" --input "{runtime.platform.path}/lib/memmap_default.ld" --out "{build.path}/memmap_default.ld" --sub __FLASH_LENGTH__ {build.flash_length} --sub __EEPROM_START__ {build.eeprom_start} --sub __FS_START__ {build.fs_start} --sub __FS_END__ {build.fs_end} --sub __RAM_LENGTH__ {build.ram_length}
|
||||
|
||||
## Compile the boot stage 2 blob
|
||||
recipe.hooks.linking.prelink.2.pattern="{compiler.path}{compiler.S.cmd}" {compiler.c.elf.flags} {compiler.c.elf.extra_flags} -c "{runtime.platform.path}/boot2/{build.boot2}.S" "-I{runtime.platform.path}/pico-sdk/src/rp2040/hardware_regs/include/" "-I{runtime.platform.path}/pico-sdk/src/common/pico_binary_info/include" -o "{build.path}/boot2.o"
|
||||
@@ -147,3 +147,9 @@ tools.picoprobe.upload.protocol=picoprobe
|
||||
tools.picoprobe.upload.params.verbose=
|
||||
tools.picoprobe.upload.params.quiet=
|
||||
tools.picoprobe.upload.pattern="{cmd}/bin/openocd" -f "interface/picoprobe.cfg" -f "target/rp2040.cfg" -s "{cmd}/share/openocd/scripts" -c "program {build.path}/{build.project_name}.elf verify reset exit"
|
||||
|
||||
tools.picodebug.cmd={runtime.platform.path}/system/openocd
|
||||
tools.picodebug.upload.protocol=pico-debug
|
||||
tools.picodebug.upload.params.verbose=
|
||||
tools.picodebug.upload.params.quiet=
|
||||
tools.picodebug.upload.pattern="{cmd}/bin/openocd" -f "board/pico-debug.cfg" -s "{cmd}/share/openocd/scripts" -c "program {build.path}/{build.project_name}.elf verify reset exit"
|
||||
|
||||
+20
-6
@@ -50,14 +50,18 @@ def BuildUSBStack(name):
|
||||
print("%s.menu.usbstack.tinyusb=Adafruit TinyUSB" % (name))
|
||||
print('%s.menu.usbstack.tinyusb.build.usbstack_flags=-DUSE_TINYUSB "-I{runtime.platform.path}/libraries/Adafruit_TinyUSB_Arduino/src/arduino"' % (name))
|
||||
|
||||
def BuildHeader(name, vendor_name, product_name, pidtouse, vid, pid, boarddefine, variant, uploadtool, flashsize, boot2):
|
||||
def BuildWithoutUSBStack(name):
|
||||
print("%s.menu.usbstack.nousb=No USB" % (name))
|
||||
print('%s.menu.usbstack.nousb.build.usbstack_flags="-DNO_USB -DDISABLE_USB_SERIAL -I{runtime.platform.path}/tools/libpico"' % (name))
|
||||
|
||||
def BuildHeader(name, vendor_name, product_name, vidtouse, pidtouse, vid, pid, boarddefine, variant, uploadtool, flashsize, ramsize, boot2):
|
||||
prettyname = vendor_name + " " + product_name
|
||||
print()
|
||||
print("# -----------------------------------")
|
||||
print("# %s" % (prettyname))
|
||||
print("# -----------------------------------")
|
||||
print("%s.name=%s" % (name, prettyname))
|
||||
print("%s.vid.0=%s" % (name, vid))
|
||||
print("%s.vid.0=%s" % (name, vidtouse))
|
||||
print("%s.pid.0=%s" % (name, pidtouse))
|
||||
print("%s.build.usbpid=-DSERIALUSB_PID=%s" % (name, pid))
|
||||
print("%s.build.board=%s" % (name, boarddefine))
|
||||
@@ -65,7 +69,7 @@ def BuildHeader(name, vendor_name, product_name, pidtouse, vid, pid, boarddefine
|
||||
print("%s.build.variant=%s" % (name, variant))
|
||||
print("%s.upload.tool=%s" % (name, uploadtool))
|
||||
print("%s.upload.maximum_size=%d" % (name, flashsize))
|
||||
print("%s.upload.maximum_data_size=262144" % (name))
|
||||
print("%s.upload.maximum_data_size=%d" % (name, ramsize))
|
||||
print("%s.upload.wait_for_upload_port=true" % (name))
|
||||
print("%s.upload.erase_cmd=" % (name))
|
||||
print("%s.serial.disableDTR=false" % (name))
|
||||
@@ -75,6 +79,7 @@ def BuildHeader(name, vendor_name, product_name, pidtouse, vid, pid, boarddefine
|
||||
print("%s.build.core=rp2040" % (name))
|
||||
print("%s.build.mcu=rp2040" % (name))
|
||||
print("%s.build.ldscript=memmap_default.ld" % (name))
|
||||
print("%s.build.ram_length=%dk" % (name, ramsize / 1024))
|
||||
print("%s.build.boot2=%s" % (name, boot2))
|
||||
print("%s.build.vid=%s" % (name, vid))
|
||||
print("%s.build.pid=%s" % (name, pid))
|
||||
@@ -92,17 +97,23 @@ def BuildGlobalMenuList():
|
||||
|
||||
|
||||
def MakeBoard(name, vendor_name, product_name, vid, pid, boarddefine, flashsizemb, boot2):
|
||||
for a, b, c in [ ["", "", "uf2conv"], ["picoprobe", " (Picoprobe)", "picoprobe"]]:
|
||||
for a, b, c in [ ["", "", "uf2conv"], ["picoprobe", " (Picoprobe)", "picoprobe"], ["picodebug", " (pico-debug)", "picodebug"]]:
|
||||
n = name + a
|
||||
p = product_name + b
|
||||
fssizelist = [ 0, 64 * 1024, 128 * 1024, 256 * 1024, 512 * 1024 ]
|
||||
for i in range(1, flashsizemb):
|
||||
fssizelist.append(i * 1024 * 1024)
|
||||
vidtouse = vid;
|
||||
ramsizekb = 256;
|
||||
if a == "picoprobe":
|
||||
pidtouse = '0x0004'
|
||||
elif a == "picodebug":
|
||||
vidtouse = '0x1209'
|
||||
pidtouse = '0x2488'
|
||||
ramsizekb = 240;
|
||||
else:
|
||||
pidtouse = pid
|
||||
BuildHeader(n, vendor_name, p, pidtouse, vid, pid, boarddefine, name, c, flashsizemb * 1024 * 1024, boot2)
|
||||
BuildHeader(n, vendor_name, p, vidtouse, pidtouse, vid, pid, boarddefine, name, c, flashsizemb * 1024 * 1024, ramsizekb * 1024, boot2)
|
||||
if name == "generic":
|
||||
BuildFlashMenu(n, 2*1024*1024, [0, 1*1024*1024])
|
||||
BuildFlashMenu(n, 4*1024*1024, [0, 2*1024*1024])
|
||||
@@ -113,7 +124,10 @@ def MakeBoard(name, vendor_name, product_name, vid, pid, boarddefine, flashsizem
|
||||
BuildFreq(n)
|
||||
BuildDebugPort(n)
|
||||
BuildDebugLevel(n)
|
||||
BuildUSBStack(n)
|
||||
if a == "picodebug":
|
||||
BuildWithoutUSBStack(n)
|
||||
else:
|
||||
BuildUSBStack(n)
|
||||
if name == "generic":
|
||||
BuildBoot(n)
|
||||
|
||||
|
||||
Reference in New Issue
Block a user