Fix file creation on SD and SDFS (#216)

The O_CREAT/etc. flags on the Pico are a full 32-bits in size, but the
core was generating a flag for SdFat using an 8-bit type, so all the
O_CREAT, O_TRUNC, O_APPEND, etc. flags got cut off.

Fix the flag size.

Fixes #214

README.md

@@ -17,6 +17,7 @@ See https://arduino-pico.readthedocs.io/en/latest/ along with the examples for m
 * Adafruit QTPy RP2040
 * Adafruit STEMMA Friend RP2040
 * Adafruit Trinkey RP2040 QT
+* Arduino Nano RP2040 Connect (preliminary)
 * SparkFun ProMicro RP2040
 * Generic (configurable flash, I/O pins)
 

boards.txt

@@ -1978,6 +1978,394 @@ adafruit_macropad2040picoprobe.menu.usbstack.picosdk.build.usbstack_flags=
 adafruit_macropad2040picoprobe.menu.usbstack.tinyusb=Adafruit TinyUSB
 adafruit_macropad2040picoprobe.menu.usbstack.tinyusb.build.usbstack_flags=-DUSE_TINYUSB "-I{build.core.path}/TinyUSB" "-I{runtime.platform.path}/libraries/Adafruit_TinyUSB_Arduino/src/arduino"
 
+# -----------------------------------
+# Arduino Nano RP2040 Connect
+# -----------------------------------
+arduino_nano_connect.name=Arduino Nano RP2040 Connect
+arduino_nano_connect.vid.0=0x2341
+arduino_nano_connect.pid.0=0x0058
+arduino_nano_connect.build.usbpid=-DSERIALUSB_PID=0x0058
+arduino_nano_connect.build.board=ARDUINO_NANO_RP2040_CONNECT
+arduino_nano_connect.build.mcu=cortex-m0plus
+arduino_nano_connect.build.variant=arduino_nano_connect
+arduino_nano_connect.upload.tool=uf2conv
+arduino_nano_connect.upload.maximum_size=16777216
+arduino_nano_connect.upload.maximum_data_size=262144
+arduino_nano_connect.upload.wait_for_upload_port=true
+arduino_nano_connect.upload.erase_cmd=
+arduino_nano_connect.serial.disableDTR=false
+arduino_nano_connect.serial.disableRTS=false
+arduino_nano_connect.build.f_cpu=125000000
+arduino_nano_connect.build.led=
+arduino_nano_connect.build.core=rp2040
+arduino_nano_connect.build.mcu=rp2040
+arduino_nano_connect.build.ldscript=memmap_default.ld
+arduino_nano_connect.build.boot2=boot2_w25q080_2_padded_checksum
+arduino_nano_connect.build.vid=0x2341
+arduino_nano_connect.build.pid=0x0058
+arduino_nano_connect.build.usb_manufacturer="Arduino"
+arduino_nano_connect.build.usb_product="Nano RP2040 Connect"
+arduino_nano_connect.menu.flash.16777216_0=16MB (no FS)
+arduino_nano_connect.menu.flash.16777216_0.upload.maximum_size=16773120
+arduino_nano_connect.menu.flash.16777216_0.build.flash_length=16773120
+arduino_nano_connect.menu.flash.16777216_0.build.eeprom_start=285208576
+arduino_nano_connect.menu.flash.16777216_0.build.fs_start=285208576
+arduino_nano_connect.menu.flash.16777216_0.build.fs_end=285208576
+arduino_nano_connect.menu.flash.16777216_65536=16MB (Sketch: 16320KB, FS: 64KB)
+arduino_nano_connect.menu.flash.16777216_65536.upload.maximum_size=16707584
+arduino_nano_connect.menu.flash.16777216_65536.build.flash_length=16707584
+arduino_nano_connect.menu.flash.16777216_65536.build.eeprom_start=285208576
+arduino_nano_connect.menu.flash.16777216_65536.build.fs_start=285143040
+arduino_nano_connect.menu.flash.16777216_65536.build.fs_end=285208576
+arduino_nano_connect.menu.flash.16777216_131072=16MB (Sketch: 16256KB, FS: 128KB)
+arduino_nano_connect.menu.flash.16777216_131072.upload.maximum_size=16642048
+arduino_nano_connect.menu.flash.16777216_131072.build.flash_length=16642048
+arduino_nano_connect.menu.flash.16777216_131072.build.eeprom_start=285208576
+arduino_nano_connect.menu.flash.16777216_131072.build.fs_start=285077504
+arduino_nano_connect.menu.flash.16777216_131072.build.fs_end=285208576
+arduino_nano_connect.menu.flash.16777216_262144=16MB (Sketch: 16128KB, FS: 256KB)
+arduino_nano_connect.menu.flash.16777216_262144.upload.maximum_size=16510976
+arduino_nano_connect.menu.flash.16777216_262144.build.flash_length=16510976
+arduino_nano_connect.menu.flash.16777216_262144.build.eeprom_start=285208576
+arduino_nano_connect.menu.flash.16777216_262144.build.fs_start=284946432
+arduino_nano_connect.menu.flash.16777216_262144.build.fs_end=285208576
+arduino_nano_connect.menu.flash.16777216_524288=16MB (Sketch: 15872KB, FS: 512KB)
+arduino_nano_connect.menu.flash.16777216_524288.upload.maximum_size=16248832
+arduino_nano_connect.menu.flash.16777216_524288.build.flash_length=16248832
+arduino_nano_connect.menu.flash.16777216_524288.build.eeprom_start=285208576
+arduino_nano_connect.menu.flash.16777216_524288.build.fs_start=284684288
+arduino_nano_connect.menu.flash.16777216_524288.build.fs_end=285208576
+arduino_nano_connect.menu.flash.16777216_1048576=16MB (Sketch: 15MB, FS: 1MB)
+arduino_nano_connect.menu.flash.16777216_1048576.upload.maximum_size=15724544
+arduino_nano_connect.menu.flash.16777216_1048576.build.flash_length=15724544
+arduino_nano_connect.menu.flash.16777216_1048576.build.eeprom_start=285208576
+arduino_nano_connect.menu.flash.16777216_1048576.build.fs_start=284160000
+arduino_nano_connect.menu.flash.16777216_1048576.build.fs_end=285208576
+arduino_nano_connect.menu.flash.16777216_2097152=16MB (Sketch: 14MB, FS: 2MB)
+arduino_nano_connect.menu.flash.16777216_2097152.upload.maximum_size=14675968
+arduino_nano_connect.menu.flash.16777216_2097152.build.flash_length=14675968
+arduino_nano_connect.menu.flash.16777216_2097152.build.eeprom_start=285208576
+arduino_nano_connect.menu.flash.16777216_2097152.build.fs_start=283111424
+arduino_nano_connect.menu.flash.16777216_2097152.build.fs_end=285208576
+arduino_nano_connect.menu.flash.16777216_3145728=16MB (Sketch: 13MB, FS: 3MB)
+arduino_nano_connect.menu.flash.16777216_3145728.upload.maximum_size=13627392
+arduino_nano_connect.menu.flash.16777216_3145728.build.flash_length=13627392
+arduino_nano_connect.menu.flash.16777216_3145728.build.eeprom_start=285208576
+arduino_nano_connect.menu.flash.16777216_3145728.build.fs_start=282062848
+arduino_nano_connect.menu.flash.16777216_3145728.build.fs_end=285208576
+arduino_nano_connect.menu.flash.16777216_4194304=16MB (Sketch: 12MB, FS: 4MB)
+arduino_nano_connect.menu.flash.16777216_4194304.upload.maximum_size=12578816
+arduino_nano_connect.menu.flash.16777216_4194304.build.flash_length=12578816
+arduino_nano_connect.menu.flash.16777216_4194304.build.eeprom_start=285208576
+arduino_nano_connect.menu.flash.16777216_4194304.build.fs_start=281014272
+arduino_nano_connect.menu.flash.16777216_4194304.build.fs_end=285208576
+arduino_nano_connect.menu.flash.16777216_5242880=16MB (Sketch: 11MB, FS: 5MB)
+arduino_nano_connect.menu.flash.16777216_5242880.upload.maximum_size=11530240
+arduino_nano_connect.menu.flash.16777216_5242880.build.flash_length=11530240
+arduino_nano_connect.menu.flash.16777216_5242880.build.eeprom_start=285208576
+arduino_nano_connect.menu.flash.16777216_5242880.build.fs_start=279965696
+arduino_nano_connect.menu.flash.16777216_5242880.build.fs_end=285208576
+arduino_nano_connect.menu.flash.16777216_6291456=16MB (Sketch: 10MB, FS: 6MB)
+arduino_nano_connect.menu.flash.16777216_6291456.upload.maximum_size=10481664
+arduino_nano_connect.menu.flash.16777216_6291456.build.flash_length=10481664
+arduino_nano_connect.menu.flash.16777216_6291456.build.eeprom_start=285208576
+arduino_nano_connect.menu.flash.16777216_6291456.build.fs_start=278917120
+arduino_nano_connect.menu.flash.16777216_6291456.build.fs_end=285208576
+arduino_nano_connect.menu.flash.16777216_7340032=16MB (Sketch: 9MB, FS: 7MB)
+arduino_nano_connect.menu.flash.16777216_7340032.upload.maximum_size=9433088
+arduino_nano_connect.menu.flash.16777216_7340032.build.flash_length=9433088
+arduino_nano_connect.menu.flash.16777216_7340032.build.eeprom_start=285208576
+arduino_nano_connect.menu.flash.16777216_7340032.build.fs_start=277868544
+arduino_nano_connect.menu.flash.16777216_7340032.build.fs_end=285208576
+arduino_nano_connect.menu.flash.16777216_8388608=16MB (Sketch: 8MB, FS: 8MB)
+arduino_nano_connect.menu.flash.16777216_8388608.upload.maximum_size=8384512
+arduino_nano_connect.menu.flash.16777216_8388608.build.flash_length=8384512
+arduino_nano_connect.menu.flash.16777216_8388608.build.eeprom_start=285208576
+arduino_nano_connect.menu.flash.16777216_8388608.build.fs_start=276819968
+arduino_nano_connect.menu.flash.16777216_8388608.build.fs_end=285208576
+arduino_nano_connect.menu.flash.16777216_9437184=16MB (Sketch: 7MB, FS: 9MB)
+arduino_nano_connect.menu.flash.16777216_9437184.upload.maximum_size=7335936
+arduino_nano_connect.menu.flash.16777216_9437184.build.flash_length=7335936
+arduino_nano_connect.menu.flash.16777216_9437184.build.eeprom_start=285208576
+arduino_nano_connect.menu.flash.16777216_9437184.build.fs_start=275771392
+arduino_nano_connect.menu.flash.16777216_9437184.build.fs_end=285208576
+arduino_nano_connect.menu.flash.16777216_10485760=16MB (Sketch: 6MB, FS: 10MB)
+arduino_nano_connect.menu.flash.16777216_10485760.upload.maximum_size=6287360
+arduino_nano_connect.menu.flash.16777216_10485760.build.flash_length=6287360
+arduino_nano_connect.menu.flash.16777216_10485760.build.eeprom_start=285208576
+arduino_nano_connect.menu.flash.16777216_10485760.build.fs_start=274722816
+arduino_nano_connect.menu.flash.16777216_10485760.build.fs_end=285208576
+arduino_nano_connect.menu.flash.16777216_11534336=16MB (Sketch: 5MB, FS: 11MB)
+arduino_nano_connect.menu.flash.16777216_11534336.upload.maximum_size=5238784
+arduino_nano_connect.menu.flash.16777216_11534336.build.flash_length=5238784
+arduino_nano_connect.menu.flash.16777216_11534336.build.eeprom_start=285208576
+arduino_nano_connect.menu.flash.16777216_11534336.build.fs_start=273674240
+arduino_nano_connect.menu.flash.16777216_11534336.build.fs_end=285208576
+arduino_nano_connect.menu.flash.16777216_12582912=16MB (Sketch: 4MB, FS: 12MB)
+arduino_nano_connect.menu.flash.16777216_12582912.upload.maximum_size=4190208
+arduino_nano_connect.menu.flash.16777216_12582912.build.flash_length=4190208
+arduino_nano_connect.menu.flash.16777216_12582912.build.eeprom_start=285208576
+arduino_nano_connect.menu.flash.16777216_12582912.build.fs_start=272625664
+arduino_nano_connect.menu.flash.16777216_12582912.build.fs_end=285208576
+arduino_nano_connect.menu.flash.16777216_13631488=16MB (Sketch: 3MB, FS: 13MB)
+arduino_nano_connect.menu.flash.16777216_13631488.upload.maximum_size=3141632
+arduino_nano_connect.menu.flash.16777216_13631488.build.flash_length=3141632
+arduino_nano_connect.menu.flash.16777216_13631488.build.eeprom_start=285208576
+arduino_nano_connect.menu.flash.16777216_13631488.build.fs_start=271577088
+arduino_nano_connect.menu.flash.16777216_13631488.build.fs_end=285208576
+arduino_nano_connect.menu.flash.16777216_14680064=16MB (Sketch: 2MB, FS: 14MB)
+arduino_nano_connect.menu.flash.16777216_14680064.upload.maximum_size=2093056
+arduino_nano_connect.menu.flash.16777216_14680064.build.flash_length=2093056
+arduino_nano_connect.menu.flash.16777216_14680064.build.eeprom_start=285208576
+arduino_nano_connect.menu.flash.16777216_14680064.build.fs_start=270528512
+arduino_nano_connect.menu.flash.16777216_14680064.build.fs_end=285208576
+arduino_nano_connect.menu.flash.16777216_15728640=16MB (Sketch: 1MB, FS: 15MB)
+arduino_nano_connect.menu.flash.16777216_15728640.upload.maximum_size=1044480
+arduino_nano_connect.menu.flash.16777216_15728640.build.flash_length=1044480
+arduino_nano_connect.menu.flash.16777216_15728640.build.eeprom_start=285208576
+arduino_nano_connect.menu.flash.16777216_15728640.build.fs_start=269479936
+arduino_nano_connect.menu.flash.16777216_15728640.build.fs_end=285208576
+arduino_nano_connect.menu.freq.125=125 MHz
+arduino_nano_connect.menu.freq.125.build.f_cpu=125000000L
+arduino_nano_connect.menu.freq.50=50 MHz
+arduino_nano_connect.menu.freq.50.build.f_cpu=50000000L
+arduino_nano_connect.menu.freq.100=100 MHz
+arduino_nano_connect.menu.freq.100.build.f_cpu=100000000L
+arduino_nano_connect.menu.freq.133=133 MHz
+arduino_nano_connect.menu.freq.133.build.f_cpu=133000000L
+arduino_nano_connect.menu.freq.150=150 MHz (Overclock)
+arduino_nano_connect.menu.freq.150.build.f_cpu=150000000L
+arduino_nano_connect.menu.freq.175=175 MHz (Overclock)
+arduino_nano_connect.menu.freq.175.build.f_cpu=175000000L
+arduino_nano_connect.menu.freq.200=200 MHz (Overclock)
+arduino_nano_connect.menu.freq.200.build.f_cpu=200000000L
+arduino_nano_connect.menu.freq.225=225 MHz (Overclock)
+arduino_nano_connect.menu.freq.225.build.f_cpu=225000000L
+arduino_nano_connect.menu.freq.250=250 MHz (Overclock)
+arduino_nano_connect.menu.freq.250.build.f_cpu=250000000L
+arduino_nano_connect.menu.freq.275=275 MHz (Overclock)
+arduino_nano_connect.menu.freq.275.build.f_cpu=275000000L
+arduino_nano_connect.menu.freq.300=300 MHz (Overclock)
+arduino_nano_connect.menu.freq.300.build.f_cpu=300000000L
+arduino_nano_connect.menu.dbgport.Disabled=Disabled
+arduino_nano_connect.menu.dbgport.Disabled.build.debug_port=
+arduino_nano_connect.menu.dbgport.Serial=Serial
+arduino_nano_connect.menu.dbgport.Serial.build.debug_port=-DDEBUG_RP2040_PORT=Serial
+arduino_nano_connect.menu.dbgport.Serial1=Serial1
+arduino_nano_connect.menu.dbgport.Serial1.build.debug_port=-DDEBUG_RP2040_PORT=Serial1
+arduino_nano_connect.menu.dbgport.Serial2=Serial2
+arduino_nano_connect.menu.dbgport.Serial2.build.debug_port=-DDEBUG_RP2040_PORT=Serial2
+arduino_nano_connect.menu.dbglvl.None=None
+arduino_nano_connect.menu.dbglvl.None.build.debug_level=
+arduino_nano_connect.menu.dbglvl.Core=Core
+arduino_nano_connect.menu.dbglvl.Core.build.debug_level=-DDEBUG_RP2040_CORE
+arduino_nano_connect.menu.dbglvl.SPI=SPI
+arduino_nano_connect.menu.dbglvl.SPI.build.debug_level=-DDEBUG_RP2040_SPI
+arduino_nano_connect.menu.dbglvl.Wire=Wire
+arduino_nano_connect.menu.dbglvl.Wire.build.debug_level=-DDEBUG_RP2040_WIRE
+arduino_nano_connect.menu.dbglvl.All=All
+arduino_nano_connect.menu.dbglvl.All.build.debug_level=-DDEBUG_RP2040_WIRE -DDEBUG_RP2040_SPI -DDEBUG_RP2040_CORE
+arduino_nano_connect.menu.dbglvl.NDEBUG=NDEBUG
+arduino_nano_connect.menu.dbglvl.NDEBUG.build.debug_level=-DNDEBUG
+arduino_nano_connect.menu.usbstack.picosdk=Pico SDK
+arduino_nano_connect.menu.usbstack.picosdk.build.usbstack_flags=
+arduino_nano_connect.menu.usbstack.tinyusb=Adafruit TinyUSB
+arduino_nano_connect.menu.usbstack.tinyusb.build.usbstack_flags=-DUSE_TINYUSB "-I{build.core.path}/TinyUSB" "-I{runtime.platform.path}/libraries/Adafruit_TinyUSB_Arduino/src/arduino"
+
+# -----------------------------------
+# Arduino Nano RP2040 Connect (Picoprobe)
+# -----------------------------------
+arduino_nano_connectpicoprobe.name=Arduino Nano RP2040 Connect (Picoprobe)
+arduino_nano_connectpicoprobe.vid.0=0x2341
+arduino_nano_connectpicoprobe.pid.0=0x0004
+arduino_nano_connectpicoprobe.build.usbpid=-DSERIALUSB_PID=0x0058
+arduino_nano_connectpicoprobe.build.board=ARDUINO_NANO_RP2040_CONNECT
+arduino_nano_connectpicoprobe.build.mcu=cortex-m0plus
+arduino_nano_connectpicoprobe.build.variant=arduino_nano_connect
+arduino_nano_connectpicoprobe.upload.tool=picoprobe
+arduino_nano_connectpicoprobe.upload.maximum_size=16777216
+arduino_nano_connectpicoprobe.upload.maximum_data_size=262144
+arduino_nano_connectpicoprobe.upload.wait_for_upload_port=true
+arduino_nano_connectpicoprobe.upload.erase_cmd=
+arduino_nano_connectpicoprobe.serial.disableDTR=false
+arduino_nano_connectpicoprobe.serial.disableRTS=false
+arduino_nano_connectpicoprobe.build.f_cpu=125000000
+arduino_nano_connectpicoprobe.build.led=
+arduino_nano_connectpicoprobe.build.core=rp2040
+arduino_nano_connectpicoprobe.build.mcu=rp2040
+arduino_nano_connectpicoprobe.build.ldscript=memmap_default.ld
+arduino_nano_connectpicoprobe.build.boot2=boot2_w25q080_2_padded_checksum
+arduino_nano_connectpicoprobe.build.vid=0x2341
+arduino_nano_connectpicoprobe.build.pid=0x0058
+arduino_nano_connectpicoprobe.build.usb_manufacturer="Arduino"
+arduino_nano_connectpicoprobe.build.usb_product="Nano RP2040 Connect (Picoprobe)"
+arduino_nano_connectpicoprobe.menu.flash.16777216_0=16MB (no FS)
+arduino_nano_connectpicoprobe.menu.flash.16777216_0.upload.maximum_size=16773120
+arduino_nano_connectpicoprobe.menu.flash.16777216_0.build.flash_length=16773120
+arduino_nano_connectpicoprobe.menu.flash.16777216_0.build.eeprom_start=285208576
+arduino_nano_connectpicoprobe.menu.flash.16777216_0.build.fs_start=285208576
+arduino_nano_connectpicoprobe.menu.flash.16777216_0.build.fs_end=285208576
+arduino_nano_connectpicoprobe.menu.flash.16777216_65536=16MB (Sketch: 16320KB, FS: 64KB)
+arduino_nano_connectpicoprobe.menu.flash.16777216_65536.upload.maximum_size=16707584
+arduino_nano_connectpicoprobe.menu.flash.16777216_65536.build.flash_length=16707584
+arduino_nano_connectpicoprobe.menu.flash.16777216_65536.build.eeprom_start=285208576
+arduino_nano_connectpicoprobe.menu.flash.16777216_65536.build.fs_start=285143040
+arduino_nano_connectpicoprobe.menu.flash.16777216_65536.build.fs_end=285208576
+arduino_nano_connectpicoprobe.menu.flash.16777216_131072=16MB (Sketch: 16256KB, FS: 128KB)
+arduino_nano_connectpicoprobe.menu.flash.16777216_131072.upload.maximum_size=16642048
+arduino_nano_connectpicoprobe.menu.flash.16777216_131072.build.flash_length=16642048
+arduino_nano_connectpicoprobe.menu.flash.16777216_131072.build.eeprom_start=285208576
+arduino_nano_connectpicoprobe.menu.flash.16777216_131072.build.fs_start=285077504
+arduino_nano_connectpicoprobe.menu.flash.16777216_131072.build.fs_end=285208576
+arduino_nano_connectpicoprobe.menu.flash.16777216_262144=16MB (Sketch: 16128KB, FS: 256KB)
+arduino_nano_connectpicoprobe.menu.flash.16777216_262144.upload.maximum_size=16510976
+arduino_nano_connectpicoprobe.menu.flash.16777216_262144.build.flash_length=16510976
+arduino_nano_connectpicoprobe.menu.flash.16777216_262144.build.eeprom_start=285208576
+arduino_nano_connectpicoprobe.menu.flash.16777216_262144.build.fs_start=284946432
+arduino_nano_connectpicoprobe.menu.flash.16777216_262144.build.fs_end=285208576
+arduino_nano_connectpicoprobe.menu.flash.16777216_524288=16MB (Sketch: 15872KB, FS: 512KB)
+arduino_nano_connectpicoprobe.menu.flash.16777216_524288.upload.maximum_size=16248832
+arduino_nano_connectpicoprobe.menu.flash.16777216_524288.build.flash_length=16248832
+arduino_nano_connectpicoprobe.menu.flash.16777216_524288.build.eeprom_start=285208576
+arduino_nano_connectpicoprobe.menu.flash.16777216_524288.build.fs_start=284684288
+arduino_nano_connectpicoprobe.menu.flash.16777216_524288.build.fs_end=285208576
+arduino_nano_connectpicoprobe.menu.flash.16777216_1048576=16MB (Sketch: 15MB, FS: 1MB)
+arduino_nano_connectpicoprobe.menu.flash.16777216_1048576.upload.maximum_size=15724544
+arduino_nano_connectpicoprobe.menu.flash.16777216_1048576.build.flash_length=15724544
+arduino_nano_connectpicoprobe.menu.flash.16777216_1048576.build.eeprom_start=285208576
+arduino_nano_connectpicoprobe.menu.flash.16777216_1048576.build.fs_start=284160000
+arduino_nano_connectpicoprobe.menu.flash.16777216_1048576.build.fs_end=285208576
+arduino_nano_connectpicoprobe.menu.flash.16777216_2097152=16MB (Sketch: 14MB, FS: 2MB)
+arduino_nano_connectpicoprobe.menu.flash.16777216_2097152.upload.maximum_size=14675968
+arduino_nano_connectpicoprobe.menu.flash.16777216_2097152.build.flash_length=14675968
+arduino_nano_connectpicoprobe.menu.flash.16777216_2097152.build.eeprom_start=285208576
+arduino_nano_connectpicoprobe.menu.flash.16777216_2097152.build.fs_start=283111424
+arduino_nano_connectpicoprobe.menu.flash.16777216_2097152.build.fs_end=285208576
+arduino_nano_connectpicoprobe.menu.flash.16777216_3145728=16MB (Sketch: 13MB, FS: 3MB)
+arduino_nano_connectpicoprobe.menu.flash.16777216_3145728.upload.maximum_size=13627392
+arduino_nano_connectpicoprobe.menu.flash.16777216_3145728.build.flash_length=13627392
+arduino_nano_connectpicoprobe.menu.flash.16777216_3145728.build.eeprom_start=285208576
+arduino_nano_connectpicoprobe.menu.flash.16777216_3145728.build.fs_start=282062848
+arduino_nano_connectpicoprobe.menu.flash.16777216_3145728.build.fs_end=285208576
+arduino_nano_connectpicoprobe.menu.flash.16777216_4194304=16MB (Sketch: 12MB, FS: 4MB)
+arduino_nano_connectpicoprobe.menu.flash.16777216_4194304.upload.maximum_size=12578816
+arduino_nano_connectpicoprobe.menu.flash.16777216_4194304.build.flash_length=12578816
+arduino_nano_connectpicoprobe.menu.flash.16777216_4194304.build.eeprom_start=285208576
+arduino_nano_connectpicoprobe.menu.flash.16777216_4194304.build.fs_start=281014272
+arduino_nano_connectpicoprobe.menu.flash.16777216_4194304.build.fs_end=285208576
+arduino_nano_connectpicoprobe.menu.flash.16777216_5242880=16MB (Sketch: 11MB, FS: 5MB)
+arduino_nano_connectpicoprobe.menu.flash.16777216_5242880.upload.maximum_size=11530240
+arduino_nano_connectpicoprobe.menu.flash.16777216_5242880.build.flash_length=11530240
+arduino_nano_connectpicoprobe.menu.flash.16777216_5242880.build.eeprom_start=285208576
+arduino_nano_connectpicoprobe.menu.flash.16777216_5242880.build.fs_start=279965696
+arduino_nano_connectpicoprobe.menu.flash.16777216_5242880.build.fs_end=285208576
+arduino_nano_connectpicoprobe.menu.flash.16777216_6291456=16MB (Sketch: 10MB, FS: 6MB)
+arduino_nano_connectpicoprobe.menu.flash.16777216_6291456.upload.maximum_size=10481664
+arduino_nano_connectpicoprobe.menu.flash.16777216_6291456.build.flash_length=10481664
+arduino_nano_connectpicoprobe.menu.flash.16777216_6291456.build.eeprom_start=285208576
+arduino_nano_connectpicoprobe.menu.flash.16777216_6291456.build.fs_start=278917120
+arduino_nano_connectpicoprobe.menu.flash.16777216_6291456.build.fs_end=285208576
+arduino_nano_connectpicoprobe.menu.flash.16777216_7340032=16MB (Sketch: 9MB, FS: 7MB)
+arduino_nano_connectpicoprobe.menu.flash.16777216_7340032.upload.maximum_size=9433088
+arduino_nano_connectpicoprobe.menu.flash.16777216_7340032.build.flash_length=9433088
+arduino_nano_connectpicoprobe.menu.flash.16777216_7340032.build.eeprom_start=285208576
+arduino_nano_connectpicoprobe.menu.flash.16777216_7340032.build.fs_start=277868544
+arduino_nano_connectpicoprobe.menu.flash.16777216_7340032.build.fs_end=285208576
+arduino_nano_connectpicoprobe.menu.flash.16777216_8388608=16MB (Sketch: 8MB, FS: 8MB)
+arduino_nano_connectpicoprobe.menu.flash.16777216_8388608.upload.maximum_size=8384512
+arduino_nano_connectpicoprobe.menu.flash.16777216_8388608.build.flash_length=8384512
+arduino_nano_connectpicoprobe.menu.flash.16777216_8388608.build.eeprom_start=285208576
+arduino_nano_connectpicoprobe.menu.flash.16777216_8388608.build.fs_start=276819968
+arduino_nano_connectpicoprobe.menu.flash.16777216_8388608.build.fs_end=285208576
+arduino_nano_connectpicoprobe.menu.flash.16777216_9437184=16MB (Sketch: 7MB, FS: 9MB)
+arduino_nano_connectpicoprobe.menu.flash.16777216_9437184.upload.maximum_size=7335936
+arduino_nano_connectpicoprobe.menu.flash.16777216_9437184.build.flash_length=7335936
+arduino_nano_connectpicoprobe.menu.flash.16777216_9437184.build.eeprom_start=285208576
+arduino_nano_connectpicoprobe.menu.flash.16777216_9437184.build.fs_start=275771392
+arduino_nano_connectpicoprobe.menu.flash.16777216_9437184.build.fs_end=285208576
+arduino_nano_connectpicoprobe.menu.flash.16777216_10485760=16MB (Sketch: 6MB, FS: 10MB)
+arduino_nano_connectpicoprobe.menu.flash.16777216_10485760.upload.maximum_size=6287360
+arduino_nano_connectpicoprobe.menu.flash.16777216_10485760.build.flash_length=6287360
+arduino_nano_connectpicoprobe.menu.flash.16777216_10485760.build.eeprom_start=285208576
+arduino_nano_connectpicoprobe.menu.flash.16777216_10485760.build.fs_start=274722816
+arduino_nano_connectpicoprobe.menu.flash.16777216_10485760.build.fs_end=285208576
+arduino_nano_connectpicoprobe.menu.flash.16777216_11534336=16MB (Sketch: 5MB, FS: 11MB)
+arduino_nano_connectpicoprobe.menu.flash.16777216_11534336.upload.maximum_size=5238784
+arduino_nano_connectpicoprobe.menu.flash.16777216_11534336.build.flash_length=5238784
+arduino_nano_connectpicoprobe.menu.flash.16777216_11534336.build.eeprom_start=285208576
+arduino_nano_connectpicoprobe.menu.flash.16777216_11534336.build.fs_start=273674240
+arduino_nano_connectpicoprobe.menu.flash.16777216_11534336.build.fs_end=285208576
+arduino_nano_connectpicoprobe.menu.flash.16777216_12582912=16MB (Sketch: 4MB, FS: 12MB)
+arduino_nano_connectpicoprobe.menu.flash.16777216_12582912.upload.maximum_size=4190208
+arduino_nano_connectpicoprobe.menu.flash.16777216_12582912.build.flash_length=4190208
+arduino_nano_connectpicoprobe.menu.flash.16777216_12582912.build.eeprom_start=285208576
+arduino_nano_connectpicoprobe.menu.flash.16777216_12582912.build.fs_start=272625664
+arduino_nano_connectpicoprobe.menu.flash.16777216_12582912.build.fs_end=285208576
+arduino_nano_connectpicoprobe.menu.flash.16777216_13631488=16MB (Sketch: 3MB, FS: 13MB)
+arduino_nano_connectpicoprobe.menu.flash.16777216_13631488.upload.maximum_size=3141632
+arduino_nano_connectpicoprobe.menu.flash.16777216_13631488.build.flash_length=3141632
+arduino_nano_connectpicoprobe.menu.flash.16777216_13631488.build.eeprom_start=285208576
+arduino_nano_connectpicoprobe.menu.flash.16777216_13631488.build.fs_start=271577088
+arduino_nano_connectpicoprobe.menu.flash.16777216_13631488.build.fs_end=285208576
+arduino_nano_connectpicoprobe.menu.flash.16777216_14680064=16MB (Sketch: 2MB, FS: 14MB)
+arduino_nano_connectpicoprobe.menu.flash.16777216_14680064.upload.maximum_size=2093056
+arduino_nano_connectpicoprobe.menu.flash.16777216_14680064.build.flash_length=2093056
+arduino_nano_connectpicoprobe.menu.flash.16777216_14680064.build.eeprom_start=285208576
+arduino_nano_connectpicoprobe.menu.flash.16777216_14680064.build.fs_start=270528512
+arduino_nano_connectpicoprobe.menu.flash.16777216_14680064.build.fs_end=285208576
+arduino_nano_connectpicoprobe.menu.flash.16777216_15728640=16MB (Sketch: 1MB, FS: 15MB)
+arduino_nano_connectpicoprobe.menu.flash.16777216_15728640.upload.maximum_size=1044480
+arduino_nano_connectpicoprobe.menu.flash.16777216_15728640.build.flash_length=1044480
+arduino_nano_connectpicoprobe.menu.flash.16777216_15728640.build.eeprom_start=285208576
+arduino_nano_connectpicoprobe.menu.flash.16777216_15728640.build.fs_start=269479936
+arduino_nano_connectpicoprobe.menu.flash.16777216_15728640.build.fs_end=285208576
+arduino_nano_connectpicoprobe.menu.freq.125=125 MHz
+arduino_nano_connectpicoprobe.menu.freq.125.build.f_cpu=125000000L
+arduino_nano_connectpicoprobe.menu.freq.50=50 MHz
+arduino_nano_connectpicoprobe.menu.freq.50.build.f_cpu=50000000L
+arduino_nano_connectpicoprobe.menu.freq.100=100 MHz
+arduino_nano_connectpicoprobe.menu.freq.100.build.f_cpu=100000000L
+arduino_nano_connectpicoprobe.menu.freq.133=133 MHz
+arduino_nano_connectpicoprobe.menu.freq.133.build.f_cpu=133000000L
+arduino_nano_connectpicoprobe.menu.freq.150=150 MHz (Overclock)
+arduino_nano_connectpicoprobe.menu.freq.150.build.f_cpu=150000000L
+arduino_nano_connectpicoprobe.menu.freq.175=175 MHz (Overclock)
+arduino_nano_connectpicoprobe.menu.freq.175.build.f_cpu=175000000L
+arduino_nano_connectpicoprobe.menu.freq.200=200 MHz (Overclock)
+arduino_nano_connectpicoprobe.menu.freq.200.build.f_cpu=200000000L
+arduino_nano_connectpicoprobe.menu.freq.225=225 MHz (Overclock)
+arduino_nano_connectpicoprobe.menu.freq.225.build.f_cpu=225000000L
+arduino_nano_connectpicoprobe.menu.freq.250=250 MHz (Overclock)
+arduino_nano_connectpicoprobe.menu.freq.250.build.f_cpu=250000000L
+arduino_nano_connectpicoprobe.menu.freq.275=275 MHz (Overclock)
+arduino_nano_connectpicoprobe.menu.freq.275.build.f_cpu=275000000L
+arduino_nano_connectpicoprobe.menu.freq.300=300 MHz (Overclock)
+arduino_nano_connectpicoprobe.menu.freq.300.build.f_cpu=300000000L
+arduino_nano_connectpicoprobe.menu.dbgport.Disabled=Disabled
+arduino_nano_connectpicoprobe.menu.dbgport.Disabled.build.debug_port=
+arduino_nano_connectpicoprobe.menu.dbgport.Serial=Serial
+arduino_nano_connectpicoprobe.menu.dbgport.Serial.build.debug_port=-DDEBUG_RP2040_PORT=Serial
+arduino_nano_connectpicoprobe.menu.dbgport.Serial1=Serial1
+arduino_nano_connectpicoprobe.menu.dbgport.Serial1.build.debug_port=-DDEBUG_RP2040_PORT=Serial1
+arduino_nano_connectpicoprobe.menu.dbgport.Serial2=Serial2
+arduino_nano_connectpicoprobe.menu.dbgport.Serial2.build.debug_port=-DDEBUG_RP2040_PORT=Serial2
+arduino_nano_connectpicoprobe.menu.dbglvl.None=None
+arduino_nano_connectpicoprobe.menu.dbglvl.None.build.debug_level=
+arduino_nano_connectpicoprobe.menu.dbglvl.Core=Core
+arduino_nano_connectpicoprobe.menu.dbglvl.Core.build.debug_level=-DDEBUG_RP2040_CORE
+arduino_nano_connectpicoprobe.menu.dbglvl.SPI=SPI
+arduino_nano_connectpicoprobe.menu.dbglvl.SPI.build.debug_level=-DDEBUG_RP2040_SPI
+arduino_nano_connectpicoprobe.menu.dbglvl.Wire=Wire
+arduino_nano_connectpicoprobe.menu.dbglvl.Wire.build.debug_level=-DDEBUG_RP2040_WIRE
+arduino_nano_connectpicoprobe.menu.dbglvl.All=All
+arduino_nano_connectpicoprobe.menu.dbglvl.All.build.debug_level=-DDEBUG_RP2040_WIRE -DDEBUG_RP2040_SPI -DDEBUG_RP2040_CORE
+arduino_nano_connectpicoprobe.menu.dbglvl.NDEBUG=NDEBUG
+arduino_nano_connectpicoprobe.menu.dbglvl.NDEBUG.build.debug_level=-DNDEBUG
+arduino_nano_connectpicoprobe.menu.usbstack.picosdk=Pico SDK
+arduino_nano_connectpicoprobe.menu.usbstack.picosdk.build.usbstack_flags=
+arduino_nano_connectpicoprobe.menu.usbstack.tinyusb=Adafruit TinyUSB
+arduino_nano_connectpicoprobe.menu.usbstack.tinyusb.build.usbstack_flags=-DUSE_TINYUSB "-I{build.core.path}/TinyUSB" "-I{runtime.platform.path}/libraries/Adafruit_TinyUSB_Arduino/src/arduino"
+
 # -----------------------------------
 # SparkFun ProMicro RP2040
 # -----------------------------------

cores/rp2040/SerialUART.cpp

@@ -161,7 +161,7 @@ void SerialUART::flush() {
     if (!_running || !m) {
         return;
     }
-    uart_default_tx_wait_blocking();
+    uart_tx_wait_blocking(_uart);
 }
 
 size_t SerialUART::write(uint8_t c) {

libraries/PDM/examples/PDMSerialPlotter/PDMSerialPlotter.ino

@@ -0,0 +1,83 @@
+/*
+  This example reads audio data from the on-board PDM microphones, and prints
+  out the samples to the Serial console. The Serial Plotter built into the
+  Arduino IDE can be used to plot the audio data (Tools -> Serial Plotter)
+
+  Circuit:
+  - Arduino Nano 33 BLE board, or
+  - Arduino Nano RP2040 Connect, or
+  - Arduino Portenta H7 board plus Portenta Vision Shield
+
+  This example code is in the public domain.
+*/
+
+#include <PDM.h>
+
+// default number of output channels
+static const char channels = 1;
+
+// default PCM output frequency
+static const int frequency = 16000;
+
+// Buffer to read samples into, each sample is 16-bits
+short sampleBuffer[512];
+
+// Number of audio samples read
+volatile int samplesRead;
+
+void setup() {
+  Serial.begin(9600);
+  while (!Serial);
+
+  // Configure the data receive callback
+  PDM.onReceive(onPDMdata);
+
+  // Optionally set the gain
+  // Defaults to 20 on the BLE Sense and -10 on the Portenta Vision Shield
+  // PDM.setGain(30);
+
+  // Initialize PDM with:
+  // - one channel (mono mode)
+  // - a 16 kHz sample rate for the Arduino Nano 33 BLE Sense
+  // - a 32 kHz or 64 kHz sample rate for the Arduino Portenta Vision Shield
+  if (!PDM.begin(channels, frequency)) {
+    Serial.println("Failed to start PDM!");
+    while (1);
+  }
+}
+
+void loop() {
+  // Wait for samples to be read
+  if (samplesRead) {
+
+    // Print samples to the serial monitor or plotter
+    for (int i = 0; i < samplesRead; i++) {
+      if(channels == 2) {
+        Serial.print("L:");
+        Serial.print(sampleBuffer[i]);
+        Serial.print(" R:");
+        i++;
+      }
+      Serial.println(sampleBuffer[i]);
+    }
+
+    // Clear the read count
+    samplesRead = 0;
+  }
+}
+
+/**
+ * Callback function to process the data from the PDM microphone.
+ * NOTE: This callback is executed as part of an ISR.
+ * Therefore using `Serial` to print messages inside this function isn't supported.
+ * */
+void onPDMdata() {
+  // Query the number of available bytes
+  int bytesAvailable = PDM.available();
+
+  // Read into the sample buffer
+  PDM.read(sampleBuffer, bytesAvailable);
+
+  // 16-bit, 2 bytes per sample
+  samplesRead = bytesAvailable / 2;
+}

libraries/PDM/keywords.txt

@@ -0,0 +1,27 @@
+#######################################
+# Syntax Coloring Map PDM
+#######################################
+
+#######################################
+# Datatypes (KEYWORD1)
+#######################################
+
+PDM	KEYWORD1
+
+#######################################
+# Methods and Functions (KEYWORD2)
+#######################################
+begin	KEYWORD2
+end	KEYWORD2
+
+available	KEYWORD2
+read	KEYWORD2
+
+onReceive	KEYWORD2
+
+setGain	KEYWORD2
+setBufferSize	KEYWORD2
+
+#######################################
+# Constants (LITERAL1)
+#######################################

libraries/PDM/library.properties

@@ -0,0 +1,9 @@
+name=PDM
+version=1.0
+author=Arduino
+maintainer=Arduino <info@arduino.cc>
+sentence=Enables the communication with devices that use the PDM Bus. Specific implementation for nRF52.
+paragraph=
+category=Communication
+url=
+architectures=rp2040

libraries/PDM/src/PDM.h

@@ -0,0 +1,68 @@
+/*
+  Copyright (c) 2019 Arduino LLC.  All right reserved.
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+  See the GNU Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#ifndef _PDM_H_INCLUDED
+#define _PDM_H_INCLUDED
+
+#include <Arduino.h>
+//#include <pinDefinitions.h>
+
+#include "utility/PDMDoubleBuffer.h"
+
+class PDMClass
+{
+public:
+  PDMClass(int dinPin, int clkPin, int pwrPin);
+  virtual ~PDMClass();
+
+  int begin(int channels, int sampleRate);
+  void end();
+
+  virtual int available();
+  virtual int read(void* buffer, size_t size);
+
+  void onReceive(void(*)(void));
+
+  //PORTENTA_H7 min -12 max 51
+  //NANO 33 BLE SENSe min 0 max 80
+  void setGain(int gain);
+  void setBufferSize(int bufferSize);
+  size_t getBufferSize();
+
+// private:
+  void IrqHandler(bool halftranfer);
+
+private:
+  int _dinPin;
+  int _clkPin;
+  int _pwrPin;
+
+  int _channels;
+  int _samplerate;
+
+  int _gain;
+  int _init;
+
+  PDMDoubleBuffer _doubleBuffer;
+
+  void (*_onReceive)(void);
+};
+#ifdef PIN_PDM_DIN
+extern PDMClass PDM;
+#endif
+#endif

libraries/PDM/src/rp2040/OpenPDMFilter.c

@@ -0,0 +1,313 @@
+/**
+ *******************************************************************************
+ * @file    OpenPDMFilter.c
+ * @author  CL
+ * @version V1.0.0
+ * @date    9-September-2015
+ * @brief   Open PDM audio software decoding Library.   
+ *          This Library is used to decode and reconstruct the audio signal
+ *          produced by ST MEMS microphone (MP45Dxxx, MP34Dxxx). 
+ *******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; COPYRIGHT 2018 STMicroelectronics</center></h2>
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ * 
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *******************************************************************************
+ */
+
+
+/* Includes ------------------------------------------------------------------*/
+
+#include "OpenPDMFilter.h"
+
+
+/* Variables -----------------------------------------------------------------*/
+
+uint32_t div_const = 0;
+int64_t sub_const = 0;
+uint32_t sinc[DECIMATION_MAX * SINCN];
+uint32_t sinc1[DECIMATION_MAX];
+uint32_t sinc2[DECIMATION_MAX * 2];
+uint32_t coef[SINCN][DECIMATION_MAX];
+#ifdef USE_LUT
+int32_t lut[256][DECIMATION_MAX / 8][SINCN];
+#endif
+
+
+/* Functions -----------------------------------------------------------------*/
+
+#ifdef USE_LUT
+int32_t filter_table_mono_64(uint8_t *data, uint8_t sincn)
+{
+  return (int32_t)
+    lut[data[0]][0][sincn] +
+    lut[data[1]][1][sincn] +
+    lut[data[2]][2][sincn] +
+    lut[data[3]][3][sincn] +
+    lut[data[4]][4][sincn] +
+    lut[data[5]][5][sincn] +
+    lut[data[6]][6][sincn] +
+    lut[data[7]][7][sincn];
+}
+int32_t filter_table_stereo_64(uint8_t *data, uint8_t sincn)
+{
+  return (int32_t)
+    lut[data[0]][0][sincn] +
+    lut[data[2]][1][sincn] +
+    lut[data[4]][2][sincn] +
+    lut[data[6]][3][sincn] +
+    lut[data[8]][4][sincn] +
+    lut[data[10]][5][sincn] +
+    lut[data[12]][6][sincn] +
+    lut[data[14]][7][sincn];
+}
+int32_t filter_table_mono_128(uint8_t *data, uint8_t sincn)
+{
+  return (int32_t)
+    lut[data[0]][0][sincn] +
+    lut[data[1]][1][sincn] +
+    lut[data[2]][2][sincn] +
+    lut[data[3]][3][sincn] +
+    lut[data[4]][4][sincn] +
+    lut[data[5]][5][sincn] +
+    lut[data[6]][6][sincn] +
+    lut[data[7]][7][sincn] +
+    lut[data[8]][8][sincn] +
+    lut[data[9]][9][sincn] +
+    lut[data[10]][10][sincn] +
+    lut[data[11]][11][sincn] +
+    lut[data[12]][12][sincn] +
+    lut[data[13]][13][sincn] +
+    lut[data[14]][14][sincn] +
+    lut[data[15]][15][sincn];
+}
+int32_t filter_table_stereo_128(uint8_t *data, uint8_t sincn)
+{
+  return (int32_t)
+    lut[data[0]][0][sincn] +
+    lut[data[2]][1][sincn] +
+    lut[data[4]][2][sincn] +
+    lut[data[6]][3][sincn] +
+    lut[data[8]][4][sincn] +
+    lut[data[10]][5][sincn] +
+    lut[data[12]][6][sincn] +
+    lut[data[14]][7][sincn] +
+    lut[data[16]][8][sincn] +
+    lut[data[18]][9][sincn] +
+    lut[data[20]][10][sincn] +
+    lut[data[22]][11][sincn] +
+    lut[data[24]][12][sincn] +
+    lut[data[26]][13][sincn] +
+    lut[data[28]][14][sincn] +
+    lut[data[30]][15][sincn];
+}
+int32_t (* filter_tables_64[2]) (uint8_t *data, uint8_t sincn) = {filter_table_mono_64, filter_table_stereo_64};
+int32_t (* filter_tables_128[2]) (uint8_t *data, uint8_t sincn) = {filter_table_mono_128, filter_table_stereo_128};
+#else
+int32_t filter_table(uint8_t *data, uint8_t sincn, TPDMFilter_InitStruct *param)
+{
+  uint8_t c, i;
+  uint16_t data_index = 0;
+  uint32_t *coef_p = &coef[sincn][0];
+  int32_t F = 0;
+  uint8_t decimation = param->Decimation;
+  uint8_t channels = param->In_MicChannels;
+
+  for (i = 0; i < decimation; i += 8) {
+    c = data[data_index];
+    F += ((c >> 7)       ) * coef_p[i    ] +
+         ((c >> 6) & 0x01) * coef_p[i + 1] +
+         ((c >> 5) & 0x01) * coef_p[i + 2] +
+         ((c >> 4) & 0x01) * coef_p[i + 3] +
+         ((c >> 3) & 0x01) * coef_p[i + 4] +
+         ((c >> 2) & 0x01) * coef_p[i + 5] +
+         ((c >> 1) & 0x01) * coef_p[i + 6] +
+         ((c     ) & 0x01) * coef_p[i + 7];
+    data_index += channels;
+  }
+  return F;
+}
+#endif
+
+void convolve(uint32_t Signal[/* SignalLen */], unsigned short SignalLen,
+              uint32_t Kernel[/* KernelLen */], unsigned short KernelLen,
+              uint32_t Result[/* SignalLen + KernelLen - 1 */])
+{
+  uint16_t n;
+
+  for (n = 0; n < SignalLen + KernelLen - 1; n++)
+  {
+    unsigned short kmin, kmax, k;
+    
+    Result[n] = 0;
+    
+    kmin = (n >= KernelLen - 1) ? n - (KernelLen - 1) : 0;
+    kmax = (n < SignalLen - 1) ? n : SignalLen - 1;
+    
+    for (k = kmin; k <= kmax; k++) {
+      Result[n] += Signal[k] * Kernel[n - k];
+    }
+  }
+}
+
+void Open_PDM_Filter_Init(TPDMFilter_InitStruct *Param)
+{
+  uint16_t i, j;
+  int64_t sum = 0;
+
+  uint8_t decimation = Param->Decimation;
+
+  for (i = 0; i < SINCN; i++) {
+    Param->Coef[i] = 0;
+    Param->bit[i] = 0;
+  }
+  for (i = 0; i < decimation; i++) {
+    sinc1[i] = 1;
+  }
+
+  Param->OldOut = Param->OldIn = Param->OldZ = 0;
+  Param->LP_ALFA = (Param->LP_HZ != 0 ? (uint16_t) (Param->LP_HZ * 256 / (Param->LP_HZ + Param->Fs / (2 * 3.14159))) : 0);
+  Param->HP_ALFA = (Param->HP_HZ != 0 ? (uint16_t) (Param->Fs * 256 / (2 * 3.14159 * Param->HP_HZ + Param->Fs)) : 0);
+
+  Param->FilterLen = decimation * SINCN;       
+  sinc[0] = 0;
+  sinc[decimation * SINCN - 1] = 0;      
+  convolve(sinc1, decimation, sinc1, decimation, sinc2);
+  convolve(sinc2, decimation * 2 - 1, sinc1, decimation, &sinc[1]);     
+  for(j = 0; j < SINCN; j++) {
+    for (i = 0; i < decimation; i++) {
+      coef[j][i] = sinc[j * decimation + i];
+      sum += sinc[j * decimation + i];
+    }
+  }
+
+  sub_const = sum >> 1;
+  div_const = sub_const * Param->MaxVolume / 32768 / Param->filterGain;
+  div_const = (div_const == 0 ? 1 : div_const);
+
+#ifdef USE_LUT
+  /* Look-Up Table. */
+  uint16_t c, d, s;
+  for (s = 0; s < SINCN; s++)
+  {
+    uint32_t *coef_p = &coef[s][0];
+    for (c = 0; c < 256; c++)
+      for (d = 0; d < decimation / 8; d++)
+        lut[c][d][s] = ((c >> 7)       ) * coef_p[d * 8    ] +
+                       ((c >> 6) & 0x01) * coef_p[d * 8 + 1] +
+                       ((c >> 5) & 0x01) * coef_p[d * 8 + 2] +
+                       ((c >> 4) & 0x01) * coef_p[d * 8 + 3] +
+                       ((c >> 3) & 0x01) * coef_p[d * 8 + 4] +
+                       ((c >> 2) & 0x01) * coef_p[d * 8 + 5] +
+                       ((c >> 1) & 0x01) * coef_p[d * 8 + 6] +
+                       ((c     ) & 0x01) * coef_p[d * 8 + 7];
+  }
+#endif
+}
+
+void Open_PDM_Filter_64(uint8_t* data, int16_t* dataOut, uint16_t volume, TPDMFilter_InitStruct *Param)
+{
+  uint8_t i, data_out_index;
+  uint8_t channels = Param->In_MicChannels;
+  uint8_t data_inc = ((DECIMATION_MAX >> 4) * channels);
+  int64_t Z, Z0, Z1, Z2;
+  int64_t OldOut, OldIn, OldZ;
+
+  OldOut = Param->OldOut;
+  OldIn = Param->OldIn;
+  OldZ = Param->OldZ;
+
+#ifdef USE_LUT
+  uint8_t j = channels - 1;
+#endif
+
+  for (i = 0, data_out_index = 0; i < Param->nSamples; i++, data_out_index += channels) {
+#ifdef USE_LUT
+    Z0 = filter_tables_64[j](data, 0);
+    Z1 = filter_tables_64[j](data, 1);
+    Z2 = filter_tables_64[j](data, 2);
+#else
+    Z0 = filter_table(data, 0, Param);
+    Z1 = filter_table(data, 1, Param);
+    Z2 = filter_table(data, 2, Param);
+#endif
+
+    Z = Param->Coef[1] + Z2 - sub_const;
+    Param->Coef[1] = Param->Coef[0] + Z1;
+    Param->Coef[0] = Z0;
+
+    OldOut = (Param->HP_ALFA * (OldOut + Z - OldIn)) >> 8;
+    OldIn = Z;
+    OldZ = ((256 - Param->LP_ALFA) * OldZ + Param->LP_ALFA * OldOut) >> 8;
+
+    Z = OldZ * volume;
+    Z = RoundDiv(Z, div_const);
+    Z = SaturaLH(Z, -32700, 32700);
+
+    dataOut[data_out_index] = Z;
+    data += data_inc;
+  }
+
+  Param->OldOut = OldOut;
+  Param->OldIn = OldIn;
+  Param->OldZ = OldZ;
+}
+
+void Open_PDM_Filter_128(uint8_t* data, int16_t* dataOut, uint16_t volume, TPDMFilter_InitStruct *Param)
+{
+  uint8_t i, data_out_index;
+  uint8_t channels = Param->In_MicChannels;
+  uint8_t data_inc = ((DECIMATION_MAX >> 3) * channels);
+  int64_t Z, Z0, Z1, Z2;
+  int64_t OldOut, OldIn, OldZ;
+
+  OldOut = Param->OldOut;
+  OldIn = Param->OldIn;
+  OldZ = Param->OldZ;
+
+#ifdef USE_LUT
+  uint8_t j = channels - 1;
+#endif
+
+  for (i = 0, data_out_index = 0; i < Param->nSamples; i++, data_out_index += channels) {
+#ifdef USE_LUT
+    Z0 = filter_tables_128[j](data, 0);
+    Z1 = filter_tables_128[j](data, 1);
+    Z2 = filter_tables_128[j](data, 2);
+#else
+    Z0 = filter_table(data, 0, Param);
+    Z1 = filter_table(data, 1, Param);
+    Z2 = filter_table(data, 2, Param);
+#endif
+
+    Z = Param->Coef[1] + Z2 - sub_const;
+    Param->Coef[1] = Param->Coef[0] + Z1;
+    Param->Coef[0] = Z0;
+
+    OldOut = (Param->HP_ALFA * (OldOut + Z - OldIn)) >> 8;
+    OldIn = Z;
+    OldZ = ((256 - Param->LP_ALFA) * OldZ + Param->LP_ALFA * OldOut) >> 8;
+
+    Z = OldZ * volume;
+    Z = RoundDiv(Z, div_const);
+    Z = SaturaLH(Z, -32700, 32700);
+
+    dataOut[data_out_index] = Z;
+    data += data_inc;
+  }
+
+  Param->OldOut = OldOut;
+  Param->OldIn = OldIn;
+  Param->OldZ = OldZ;
+}

libraries/PDM/src/rp2040/OpenPDMFilter.h

@@ -0,0 +1,99 @@
+/**
+ *******************************************************************************
+ * @file    OpenPDMFilter.h
+ * @author  CL
+ * @version V1.0.0
+ * @date    9-September-2015
+ * @brief   Header file for Open PDM audio software decoding Library.   
+ *          This Library is used to decode and reconstruct the audio signal
+ *          produced by ST MEMS microphone (MP45Dxxx, MP34Dxxx). 
+ *******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; COPYRIGHT 2018 STMicroelectronics</center></h2>
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ * 
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *******************************************************************************
+ */
+
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+
+#ifndef __OPENPDMFILTER_H
+#define __OPENPDMFILTER_H
+
+#ifdef __cplusplus
+  extern "C" {
+#endif
+
+
+/* Includes ------------------------------------------------------------------*/
+
+#include <stdint.h>
+
+
+/* Definitions ---------------------------------------------------------------*/
+
+/*
+ * Enable to use a Look-Up Table to improve performances while using more FLASH
+ * and RAM memory.
+ * Note: Without Look-Up Table up to stereo@16KHz configuration is supported.
+ */
+#define USE_LUT
+
+#define SINCN            3
+#define DECIMATION_MAX 128
+
+#define HTONS(A) ((((uint16_t)(A) & 0xff00) >> 8) | \
+                 (((uint16_t)(A) & 0x00ff) << 8))
+#define RoundDiv(a, b)    (((a)>0)?(((a)+(b)/2)/(b)):(((a)-(b)/2)/(b)))
+#define SaturaLH(N, L, H) (((N)<(L))?(L):(((N)>(H))?(H):(N)))
+
+
+/* Types ---------------------------------------------------------------------*/
+
+typedef struct {
+  /* Public */
+  float LP_HZ;
+  float HP_HZ;
+  uint16_t Fs;
+  unsigned int nSamples;
+  uint8_t In_MicChannels;
+  uint8_t Out_MicChannels;
+  uint8_t Decimation;
+  uint8_t MaxVolume;
+  /* Private */
+  uint32_t Coef[SINCN];
+  uint16_t FilterLen;
+  int64_t OldOut, OldIn, OldZ;
+  uint16_t LP_ALFA;
+  uint16_t HP_ALFA;
+  uint16_t bit[5];
+  uint16_t byte;
+  uint16_t filterGain;
+} TPDMFilter_InitStruct;
+
+
+/* Exported functions ------------------------------------------------------- */
+
+void Open_PDM_Filter_Init(TPDMFilter_InitStruct *init_struct);
+void Open_PDM_Filter_64(uint8_t* data, int16_t* data_out, uint16_t mic_gain, TPDMFilter_InitStruct *init_struct);
+void Open_PDM_Filter_128(uint8_t* data, int16_t* data_out, uint16_t mic_gain, TPDMFilter_InitStruct *init_struct);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // __OPENPDMFILTER_H
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

libraries/PDM/src/rp2040/PDM.cpp

@@ -0,0 +1,205 @@
+
+
+#include "Arduino.h"
+#include "PDM.h"
+#include "OpenPDMFilter.h"
+
+extern "C" {
+#include "hardware/pio.h"
+#include "hardware/dma.h"
+#include "hardware/clocks.h"
+}
+#include "hardware/sync.h" 
+#include "pdm.pio.h"
+
+// Hardware peripherals used
+uint dmaChannel = 0;
+PIO pio = pio0;
+uint sm = 0;
+
+// raw buffers contain PDM data
+#define RAW_BUFFER_SIZE 512 // should be a multiple of (decimation / 8)
+uint8_t rawBuffer0[RAW_BUFFER_SIZE];
+uint8_t rawBuffer1[RAW_BUFFER_SIZE];
+uint8_t* rawBuffer[2] = {rawBuffer0, rawBuffer1};
+volatile int rawBufferIndex = 0; 
+
+int decimation = 64;
+
+// final buffer is the one to be filled with PCM data
+int16_t* volatile finalBuffer;
+
+// OpenPDM filter used to convert PDM into PCM
+#define FILTER_GAIN     16
+TPDMFilter_InitStruct filter;
+
+extern "C" {
+  __attribute__((__used__)) void dmaHandler(void)
+  {
+    PDM.IrqHandler(true);
+  }
+}
+
+
+PDMClass::PDMClass(int dinPin, int clkPin, int pwrPin) :
+  _dinPin(dinPin),
+  _clkPin(clkPin),
+  _pwrPin(pwrPin),
+  _onReceive(NULL),
+  _gain(-1),
+  _channels(-1),
+  _samplerate(-1),
+  _init(-1)
+{
+}
+
+PDMClass::~PDMClass()
+{
+}
+
+int PDMClass::begin(int channels, int sampleRate)
+{
+  //_channels = channels; // only one channel available
+
+  // clear the final buffers
+  _doubleBuffer.reset();
+  finalBuffer = (int16_t*)_doubleBuffer.data();
+  int finalBufferLength = _doubleBuffer.availableForWrite() / sizeof(int16_t);
+  _doubleBuffer.swap(0);
+
+  int rawBufferLength = RAW_BUFFER_SIZE / (decimation / 8);
+  // Saturate number of samples. Remaining bytes are dropped.
+  if (rawBufferLength > finalBufferLength) {
+    rawBufferLength = finalBufferLength;
+  }
+
+  /* Initialize Open PDM library */
+  filter.Fs = sampleRate;
+  filter.nSamples = rawBufferLength;
+  filter.LP_HZ = sampleRate/2;
+  filter.HP_HZ = 10;
+  filter.In_MicChannels = 1;
+  filter.Out_MicChannels = 1;
+  filter.Decimation = decimation;
+  if(_gain == -1) {
+    _gain = FILTER_GAIN;
+  }
+  filter.filterGain = _gain;
+  Open_PDM_Filter_Init(&filter);
+
+  // Configure PIO state machine
+  float clkDiv = (float)clock_get_hz(clk_sys) / sampleRate / decimation / 2; 
+  uint offset = pio_add_program(pio, &pdm_pio_program);
+  pdm_pio_program_init(pio, sm, offset, _clkPin, _dinPin, clkDiv);
+
+  // Wait for microphone 
+  delay(100);
+
+  // Configure DMA for transferring PIO rx buffer to raw buffers
+  dma_channel_config c = dma_channel_get_default_config(dmaChannel);
+  channel_config_set_read_increment(&c, false);
+  channel_config_set_write_increment(&c, true);
+  channel_config_set_dreq(&c, pio_get_dreq(pio, sm, false));
+  channel_config_set_transfer_data_size(&c, DMA_SIZE_8);
+
+  // Clear DMA interrupts
+  dma_hw->ints0 = 1u << dmaChannel; 
+  // Enable DMA interrupts
+  dma_channel_set_irq0_enabled(dmaChannel, true);
+  irq_set_exclusive_handler(DMA_IRQ_0, dmaHandler);
+  irq_set_enabled(DMA_IRQ_0, true);
+
+  dma_channel_configure(dmaChannel, &c,
+    rawBuffer[rawBufferIndex],        // Destinatinon pointer
+    &pio->rxf[sm],      // Source pointer
+    RAW_BUFFER_SIZE, // Number of transfers
+    true                // Start immediately
+  );
+
+  _init = 1;
+
+  return 1;
+}
+
+void PDMClass::end()
+{
+  dma_channel_abort(dmaChannel);
+  pinMode(_clkPin, INPUT);
+}
+
+int PDMClass::available()
+{
+  //NVIC_DisableIRQ(DMA_IRQ_0n);
+  //uint32_t interrupts = save_and_disable_interrupts();
+	irq_set_enabled(DMA_IRQ_0, false);
+  size_t avail = _doubleBuffer.available();
+  irq_set_enabled(DMA_IRQ_0, true);
+  //restore_interrupts(interrupts);
+  //NVIC_EnableIRQ(DMA_IRQ_0n);
+  return avail;
+}
+
+int PDMClass::read(void* buffer, size_t size)
+{
+	irq_set_enabled(DMA_IRQ_0, false);
+  int read = _doubleBuffer.read(buffer, size);
+  irq_set_enabled(DMA_IRQ_0, true);
+  return read;
+}
+
+void PDMClass::onReceive(void(*function)(void))
+{
+  _onReceive = function;
+}
+
+void PDMClass::setGain(int gain)
+{
+  _gain = gain;
+  if(_init == 1) {
+    filter.filterGain = _gain;
+    Open_PDM_Filter_Init(&filter);
+  }
+}
+
+void PDMClass::setBufferSize(int bufferSize)
+{
+  _doubleBuffer.setSize(bufferSize);
+}
+
+void PDMClass::IrqHandler(bool halftranfer)
+{
+  static int cutSamples = 100;
+
+  // Clear the interrupt request.
+  dma_hw->ints0 = 1u << dmaChannel; 
+  // Restart dma pointing to the other buffer 
+  int shadowIndex = rawBufferIndex ^ 1;
+  dma_channel_set_write_addr(dmaChannel, rawBuffer[shadowIndex], true);
+
+  if (_doubleBuffer.available()) {
+    // buffer overflow, stop
+    return end();
+  }
+
+  // fill final buffer with PCM samples
+  Open_PDM_Filter_64(rawBuffer[rawBufferIndex], finalBuffer, 1, &filter);
+
+  if (cutSamples) {
+    memset(finalBuffer, 0, cutSamples);
+    cutSamples = 0;
+  }
+
+  // swap final buffer and raw buffers' indexes
+  finalBuffer = (int16_t*)_doubleBuffer.data();
+  _doubleBuffer.swap(filter.nSamples * sizeof(int16_t));
+  rawBufferIndex = shadowIndex;
+
+  if (_onReceive) {
+    _onReceive();
+  }
+}
+#ifdef PIN_PDM_DIN
+PDMClass PDM(PIN_PDM_DIN, PIN_PDM_CLK, -1);
+#endif // PIN_PDM_DIN
+
+

libraries/PDM/src/rp2040/pdm.pio

@@ -0,0 +1,41 @@
+
+.program pdm_pio
+.side_set 1
+.wrap_target
+
+  ; prova a cambiare edge
+
+  ;sample on falling edge
+  push iffull noblock  side 1 
+  ;nop  side 1 
+  ;nop  side 0 
+  in pins, 1  side 0 
+  ;nop side 0
+  
+.wrap
+
+% c-sdk {
+#include "hardware/gpio.h"
+
+static inline void pdm_pio_program_init(PIO pio, uint sm, uint offset, uint clkPin, uint dataPin, float clkDiv) {
+  pio_sm_config c = pdm_pio_program_get_default_config(offset);
+  sm_config_set_sideset(&c, 1, false, false);
+  //sm_config_set_in_shift(&c, false, true, 8);
+  sm_config_set_in_shift(&c, false, false, 8);
+
+  sm_config_set_in_pins(&c, dataPin);
+  sm_config_set_sideset_pins(&c, clkPin);
+  sm_config_set_clkdiv(&c, clkDiv);
+
+  pio_sm_set_consecutive_pindirs(pio, sm, dataPin, 1, false);
+  pio_sm_set_consecutive_pindirs(pio, sm, clkPin, 1, true);
+  pio_sm_set_pins_with_mask(pio, sm, 0, (1u << clkPin) );
+  //pio_gpio_init(pio, dataPin);
+  pio_gpio_init(pio, clkPin);
+
+  pio_sm_init(pio, sm, offset, &c);
+  pio_sm_set_enabled(pio, sm, true);
+}
+
+
+%}

libraries/PDM/src/rp2040/pdm.pio.h

@@ -0,0 +1,56 @@
+// -------------------------------------------------- //
+// This file is autogenerated by pioasm; do not edit! //
+// -------------------------------------------------- //
+
+#if !PICO_NO_HARDWARE
+#include "hardware/pio.h"
+#endif
+
+// ------- //
+// pdm_pio //
+// ------- //
+
+#define pdm_pio_wrap_target 0
+#define pdm_pio_wrap 1
+
+static const uint16_t pdm_pio_program_instructions[] = {
+            //     .wrap_target
+    0x9040, //  0: push   iffull noblock  side 1     
+    0x4001, //  1: in     pins, 1         side 0     
+            //     .wrap
+};
+
+#if !PICO_NO_HARDWARE
+static const struct pio_program pdm_pio_program = {
+    .instructions = pdm_pio_program_instructions,
+    .length = 2,
+    .origin = -1,
+};
+
+static inline pio_sm_config pdm_pio_program_get_default_config(uint offset) {
+    pio_sm_config c = pio_get_default_sm_config();
+    sm_config_set_wrap(&c, offset + pdm_pio_wrap_target, offset + pdm_pio_wrap);
+    sm_config_set_sideset(&c, 1, false, false);
+    return c;
+}
+
+#include "hardware/gpio.h"
+static inline void pdm_pio_program_init(PIO pio, uint sm, uint offset, uint clkPin, uint dataPin, float clkDiv) {
+  pio_sm_config c = pdm_pio_program_get_default_config(offset);
+  sm_config_set_sideset(&c, 1, false, false);
+  //sm_config_set_in_shift(&c, false, true, 8);
+  sm_config_set_in_shift(&c, false, false, 8);
+  sm_config_set_in_pins(&c, dataPin);
+  sm_config_set_sideset_pins(&c, clkPin);
+  sm_config_set_clkdiv(&c, clkDiv);
+  pio_sm_set_consecutive_pindirs(pio, sm, dataPin, 1, false);
+  pio_sm_set_consecutive_pindirs(pio, sm, clkPin, 1, true);
+  pio_sm_set_pins_with_mask(pio, sm, 0, (1u << clkPin) );
+  //pio_gpio_init(pio, dataPin);
+  pio_gpio_init(pio, clkPin);
+  pio_sm_init(pio, sm, offset, &c);
+  pio_sm_set_enabled(pio, sm, true);
+}
+
+#endif
+

libraries/PDM/src/utility/PDMDoubleBuffer.cpp

@@ -0,0 +1,139 @@
+/*
+  Copyright (c) 2016 Arduino LLC.  All right reserved.
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+  See the GNU Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#include <stdlib.h>
+#include <string.h>
+
+#include "PDMDoubleBuffer.h"
+
+PDMDoubleBuffer::PDMDoubleBuffer() :
+  _size(DEFAULT_PDM_BUFFER_SIZE)
+{
+  reset();
+}
+
+PDMDoubleBuffer::~PDMDoubleBuffer()
+{
+}
+
+void PDMDoubleBuffer::setSize(int size)
+{
+  _size = size;
+  reset();
+}
+
+size_t PDMDoubleBuffer::getSize()
+{
+  return _size;
+}
+
+void PDMDoubleBuffer::reset()
+{
+  _buffer[0] = (uint8_t*)realloc(_buffer[0], _size);
+  _buffer[1] = (uint8_t*)realloc(_buffer[1], _size);
+
+  memset(_buffer[0], 0x00, _size);
+  memset(_buffer[1], 0x00, _size);
+
+  _index = 0;
+  _length[0] = 0;
+  _length[1] = 0;
+  _readOffset[0] = 0;
+  _readOffset[1] = 0;
+}
+
+size_t PDMDoubleBuffer::availableForWrite()
+{
+  return (_size - (_length[_index] - _readOffset[_index]));
+}
+
+size_t PDMDoubleBuffer::write(const void *buffer, size_t size)
+{
+  size_t space = availableForWrite();
+
+  if (size > space) {
+    size = space;
+  }
+
+  if (size == 0) {
+    return 0;
+  }
+
+  memcpy(&_buffer[_index][_length[_index]], buffer, size);
+
+  _length[_index] += size;
+
+  return size;
+}
+
+size_t PDMDoubleBuffer::read(void *buffer, size_t size)
+{
+  size_t avail = available();
+
+  if (size > avail) {
+    size = avail;
+  }
+
+  if (size == 0) {
+    return 0;
+  }
+
+  memcpy(buffer, &_buffer[_index][_readOffset[_index]], size);
+  _readOffset[_index] += size;
+
+  return size;
+}
+
+size_t PDMDoubleBuffer::peek(void *buffer, size_t size)
+{
+  size_t avail = available();
+
+  if (size > avail) {
+    size = avail;
+  }
+
+  if (size == 0) {
+    return 0;
+  }
+
+  memcpy(buffer, &_buffer[_index][_readOffset[_index]], size);
+
+  return size;
+}
+
+void* PDMDoubleBuffer::data()
+{
+  return (void*)_buffer[_index];
+}
+
+size_t PDMDoubleBuffer::available()
+{
+  return _length[_index] - _readOffset[_index];
+}
+
+void PDMDoubleBuffer::swap(int length)
+{
+  if (_index == 0) {
+    _index = 1;
+  } else {
+    _index = 0;
+  }
+
+  _length[_index] = length;
+  _readOffset[_index] = 0;
+}

libraries/PDM/src/utility/PDMDoubleBuffer.h

@@ -0,0 +1,54 @@
+/*
+  Copyright (c) 2016 Arduino LLC.  All right reserved.
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+  See the GNU Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#ifndef _PDM_DOUBLE_BUFFER_H_INCLUDED
+#define _PDM_DOUBLE_BUFFER_H_INCLUDED
+
+#include <stddef.h>
+#include <stdint.h>
+
+#define DEFAULT_PDM_BUFFER_SIZE 512
+
+class PDMDoubleBuffer
+{
+public:
+  PDMDoubleBuffer();
+  virtual ~PDMDoubleBuffer();
+
+  void setSize(int size);
+  size_t getSize();
+
+  void reset();
+
+  size_t availableForWrite();
+  size_t write(const void *buffer, size_t size);
+  size_t read(void *buffer, size_t size);
+  size_t peek(void *buffer, size_t size);
+  void* data();
+  size_t available();
+  void swap(int length = 0);
+
+private:
+  uint8_t* _buffer[2] __attribute__((aligned (16)));
+  int _size;
+  volatile int _length[2];
+  volatile int _readOffset[2];
+  volatile int _index; 
+};
+
+#endif

libraries/SDFS/src/SDFS.h

@@ -234,8 +234,8 @@ protected:
     }
 
 
-    static uint8_t _getFlags(OpenMode openMode, AccessMode accessMode) {
-        uint8_t mode = 0;
+    static int _getFlags(OpenMode openMode, AccessMode accessMode) {
+        int mode = 0;
         if (openMode & OM_CREATE) {
             mode |= O_CREAT;
         }

package/package_pico_index.template.json

@@ -38,6 +38,9 @@
                   {
                      "name": "Adafruit Trinkey RP2040 QT"
                   },
+                  {
+                     "name": "Arduino Nano RP2040 Connect"
+                  },
                   {
                      "name": "SparkFun ProMicro RP2040"
                   },

tests/common.sh

@@ -26,6 +26,7 @@ function skip_ino()
 /p08_DigitalHourglass/
 /p13_TouchSensorLamp/
 /StringComparisonOperators/
+/PDMSerialPlotter/
 EOL
     echo $ino | grep -q -F "$skiplist"
     echo $(( 1 - $? ))

tools/makeboards.py

@@ -126,6 +126,7 @@ MakeBoard("adafruit_qtpy", "Adafruit", "QT Py RP2040", "0x239a", "0x80f7", "ADAF
 MakeBoard("adafruit_stemmafriend", "Adafruit", "STEMMA Friend RP2040", "0x239a", "0x80e3", "ADAFRUIT_STEMMAFRIEND_RP2040", 8, "boot2_w25q080_2_padded_checksum")
 MakeBoard("adafruit_trinkeyrp2040qt", "Adafruit", "Trinkey RP2040 QT", "0x239a", "0x8109", "ADAFRUIT_TRINKEYQT_RP2040", 8, "boot2_w25q080_2_padded_checksum")
 MakeBoard("adafruit_macropad2040", "Adafruit", "MacroPad RP2040", "0x239a", "0x8107", "ADAFRUIT_MACROPAD_RP2040", 8, "boot2_w25q080_2_padded_checksum")
+MakeBoard("arduino_nano_connect", "Arduino", "Nano RP2040 Connect", "0x2341", "0x0058", "ARDUINO_NANO_RP2040_CONNECT", 16, "boot2_w25q080_2_padded_checksum")
 MakeBoard("sparkfun_promicrorp2040", "SparkFun", "ProMicro RP2040", "0x1b4f", "0x0026", "SPARKFUN_PROMICRO_RP2040", 16, "boot2_generic_03h_4_padded_checksum")
 MakeBoard("generic", "Generic", "RP2040", "0x2e8a", "0xf00a", "GENERIC_RP2040", 16, "boot2_generic_03h_4_padded_checksum")
 

variants/arduino_nano_connect/PinArduino.txt

@@ -0,0 +1,53 @@
+/* Taken from https://github.com/arduino/ArduinoCore-mbed/tree/master/variants/NANO_RP2040_CONNECT */
+
+AnalogPinDescription g_AAnalogPinDescription[] = {
+  { p26,        NULL },    // A0
+  { p27,        NULL },    // A1
+  { p28,        NULL },    // A2
+  { p29,        NULL },    // A3
+};
+
+PinDescription g_APinDescription[] = {
+  // D0 - D7
+  { p1,         NULL, NULL, NULL },    // D0
+  { p0,         NULL, NULL, NULL },    // D1
+  { p25,        NULL, NULL, NULL },    // D2
+  { p15,        NULL, NULL, NULL },    // D3
+  { p16,        NULL, NULL, NULL },    // D4
+  { p17,        NULL, NULL, NULL },    // D5
+  { p18,        NULL, NULL, NULL },    // D6
+  { p19,        NULL, NULL, NULL },    // D7
+
+  // D8 - D13
+  { p20,        NULL, NULL, NULL },    // D8
+  { p21,        NULL, NULL, NULL },    // D9
+  { p5,         NULL, NULL, NULL },    // D10
+  { p7,         NULL, NULL, NULL },    // D11 / SPITX
+  { p4,         NULL, NULL, NULL },    // D12 / SPIRX
+  { p6,         NULL, NULL, NULL },    // D13 / SPICLK / LEDB 
+
+  // Analog as digital
+  // A4 to A7 are controlled by Nina module and exposed via different APIs
+  { p26,        NULL, NULL, NULL },    // A0 -> D14
+  { p27,        NULL, NULL, NULL },    // A1 -> D15
+  { p28,        NULL, NULL, NULL },    // A2 -> D16
+  { p29,        NULL, NULL, NULL },    // A3 -> D17
+
+  // I2C
+  { p12,        NULL, NULL, NULL },    // A4 / SDA  -> D18
+  { p13,        NULL, NULL, NULL },    // A5 / SCL  -> D19
+
+  // Internal pins - D20 - D23
+  { p2,         NULL, NULL, NULL },    // GPIO0
+  { p24,        NULL, NULL, NULL },    // IMU IRQ
+  { p22,        NULL, NULL, NULL },    // PDM DATA IN
+  { p23,        NULL, NULL, NULL },    // PDM CLOCK
+
+  // Internal pins Nina - D24 - D29
+  { p3,         NULL, NULL, NULL },    // RESET_NINA
+  { p8,         NULL, NULL, NULL },    // SPI1_CIPO / UART1_TX
+  { p9,         NULL, NULL, NULL },    // SPI1_CS / UART1_RX
+  { p10,        NULL, NULL, NULL },    // SPI1_ACK / UART1_CTS
+  { p11,        NULL, NULL, NULL },    // SPI1_COPI / UART1_RTS
+  { p14,        NULL, NULL, NULL },    // SPI1_SCK
+};

variants/arduino_nano_connect/nina_pins.h

@@ -0,0 +1,48 @@
+/* Taken from https://github.com/arduino/ArduinoCore-mbed/tree/master/variants/NANO_RP2040_CONNECT */
+
+#ifndef _NINA_PINS_
+#define _NINA_PINS_
+
+/******************************************************************************
+ * INCLUDE
+ ******************************************************************************/
+
+#include "Arduino.h"
+//#include "WiFiNINA.h"
+/******************************************************************************
+ * PREPROCESSOR-MAGIC
+ ******************************************************************************/
+
+#if __has_include("WiFiNINA.h")
+#  define NINA_ATTRIBUTE
+#else
+#  define NINA_ATTRIBUTE __attribute__ ((error("Please include WiFiNINA.h to use this pin")))
+#endif
+
+/******************************************************************************
+ * TYPEDEF
+ ******************************************************************************/
+
+enum NinaPin {
+  LEDR = 27,
+  LEDG = 25,
+  LEDB = 26//,
+  //A4   = 34,
+  //A5   = 39,
+  //A6   = 36,
+  //A7   = 35
+};
+
+/******************************************************************************
+ * FUNCTION DECLARATION
+ ******************************************************************************/
+
+void      NINA_ATTRIBUTE pinMode     (NinaPin pin, PinMode mode);
+PinStatus NINA_ATTRIBUTE digitalRead (NinaPin pin);
+void      NINA_ATTRIBUTE digitalWrite(NinaPin pin, PinStatus value);
+int       NINA_ATTRIBUTE analogRead  (NinaPin pin);
+void      NINA_ATTRIBUTE analogWrite (NinaPin pin, int value);
+
+#undef NINA_ATTRIBUTE
+
+#endif /* _NINA_PINS_ */

variants/arduino_nano_connect/pins_arduino.h

@@ -0,0 +1,120 @@
+/* Taken from https://github.com/arduino/ArduinoCore-mbed/tree/master/variants/NANO_RP2040_CONNECT */
+
+#pragma once
+
+// Pin definitions taken from:
+//    https://datasheets.raspberrypi.org/pico/pico-datasheet.pdf
+static const uint8_t D0 = (1u);
+static const uint8_t D1 = (0u);
+static const uint8_t D2 = (25u);
+static const uint8_t D3 = (15u);
+static const uint8_t D4 = (16u);
+static const uint8_t D5 = (17u);
+static const uint8_t D6 = (18u);
+static const uint8_t D7 = (19u);
+static const uint8_t D8 = (20u);
+static const uint8_t D9 = (21u);
+static const uint8_t D10 = (5u);
+static const uint8_t D11 = (7u);
+static const uint8_t D12 = (4u);
+static const uint8_t D13 = (6u);
+static const uint8_t D14 = (26u);
+static const uint8_t D15 = (27u);
+static const uint8_t D16 = (28u);
+static const uint8_t D17 = (29u); 
+static const uint8_t D18 = (12u); 
+static const uint8_t D19 = (13u); 
+static const uint8_t D20 = (2u);
+static const uint8_t D21 = (24u);
+static const uint8_t D22 = (22u);
+static const uint8_t D23 = (23u);
+static const uint8_t D24 = (3u);
+static const uint8_t D25 = (8u);
+static const uint8_t D26 = (9u);
+static const uint8_t D27 = (10u);
+static const uint8_t D28 = (11u);
+static const uint8_t D29 = (14u);
+
+static const uint8_t A0 = (26u);
+static const uint8_t A1 = (27u);
+static const uint8_t A2 = (28u);
+static const uint8_t A3 = (29u);
+static const uint8_t A4 = (12u);
+static const uint8_t A5 = (13u);
+
+// LEDs
+#define PIN_LED        (D13)
+
+// Serial
+#define PIN_SERIAL1_TX (D1)
+#define PIN_SERIAL1_RX (D0)
+
+#define PIN_SERIAL2_TX (D25)
+#define PIN_SERIAL2_RX (D26)
+
+// SPI
+#define PIN_SPI0_MISO  (D12)
+#define PIN_SPI0_MOSI  (D11)
+#define PIN_SPI0_SCK   (D13)
+#define PIN_SPI0_SS    (13u)//(D10)
+
+#define PIN_SPI1_MISO  (D25)
+#define PIN_SPI1_MOSI  (D28)
+#define PIN_SPI1_SCK   (D29)
+#define PIN_SPI1_SS    (13u)
+
+// Wire
+#define PIN_WIRE0_SDA  (D18)
+#define PIN_WIRE0_SCL  (D19)
+
+#define PIN_WIRE1_SDA  (26u) //Non c'è
+#define PIN_WIRE1_SCL  (27u) //Non c'è
+
+#define SERIAL_HOWMANY (3u)
+#define SPI_HOWMANY    (2u)
+#define WIRE_HOWMANY   (1u)
+
+#define PINS_COUNT          (30u)
+#define NUM_DIGITAL_PINS    (30u)
+#define NUM_ANALOG_INPUTS   (4u)
+#define NUM_ANALOG_OUTPUTS  (0u)
+#define ADC_RESOLUTION      (12u)
+
+#define LED_BUILTIN PIN_LED
+#define DigitalPinToPinName(p) (p)
+
+static const uint8_t SS = PIN_SPI0_SS;
+static const uint8_t MOSI = PIN_SPI0_MOSI;
+static const uint8_t MISO = PIN_SPI0_MISO;
+static const uint8_t SCK = PIN_SPI0_SCK;
+
+//Nina support
+
+#define NINA_RESETN		(D24)
+#define SerialNina		Serial3
+#define SerialHCI		Serial2
+
+//#define NINA_GPIOIRQ	(21u) // LEDG pin (GPIO26 on NINA)
+#define NINA_GPIO0		(20u) // real GPIO0 on NINA
+
+#define SPIWIFI_SS		(D26)
+#define SPIWIFI_ACK		(D27)
+#define SPIWIFI_RESET	(NINA_RESETN)
+#define SPIWIFI 		(SPI1)
+
+// PDM Interfaces
+// ---------------
+#define PIN_PDM_CLK	 (D23)
+#define PIN_PDM_DIN	 (D22)
+
+//Cose copiate a caso
+
+#define SERIAL_PORT_USBVIRTUAL      SerialUSB
+#define SERIAL_PORT_MONITOR         SerialUSB
+#define SERIAL_PORT_HARDWARE        Serial1
+#define SERIAL_PORT_HARDWARE_OPEN   Serial2
+
+#define CRYPTO_WIRE		Wire
+
+#define USB_MAX_POWER	(500)
+#include "nina_pins.h"