diff --git a/docs/info/errors.md b/docs/info/errors.md
new file mode 100644
index 0000000..5500c97
--- /dev/null
+++ b/docs/info/errors.md
@@ -0,0 +1,126 @@
+# Error Dictionary
+
+This page contains many possible errors you may run into with WACCA
+
+## Red/Blue Error Screens
+
+### 800-0: Unknown Error { #800-0 }
+This just happens sometimes. Supposedly an auth server error. Check the AMDaemon console for any unusual errors,
+and then try again.
+
+### 1102-1: Touch Board Invalid Side { #1102-1 }
+Both touch sync boards were reported to be the same side, which is not a valid configuration. Ensure the rotary DIP
+switch on the sync boards are set properly. The left side board should be 7, and the right side board should be 8.
+
+### 1103-1: No Touch Unit Boards Found { #1103-1 }
+No touch unit boards (the boards in the individual panels) were found. Ensure that the cable which attaches the unit
+boards to the sync board is connected properly.
+
+### 1104-1: Touch Board Communication Failed { #1104-1 }
+Connection to the touch sync boards could not be established due to the COM port being in use. Make sure there aren't
+any other applications using the COM ports for the touch boards.
+
+### 1104-2: Touch Get Version Timeout { #1104-2 }
+The request to get the version of the touch boards has timed out. There is likely something wrong with your hardware,
+or your software implementation is not correct.
+
+### 1104-3: Touch Set Threshold Timeout { #1104-3 }
+The request to set the sensitivity thresholds of the touch boards has timed out. There is likely something wrong with
+your hardware, or your software implementation is not correct.
+
+### 1105-1: Touch Key Data Timeout { #1105-1 }
+The touch boards did not respond with key data fast enough. There is likely something wrong with your hardware,
+or your software implementation is not correct.
+
+### 1105-2: Touch Signal Data Timeout { #1105-2 }
+The touch boards did not respond with raw sensor data fast enough. This functionality is unused by the game itself,
+and is only accessible in the development menu. There is likely something wrong with your hardware, or your software
+implementation is not correct.
+
+### 1106-1: Touch Unit Board Error { #1106-1 }
+One of the touch unit boards did not respond correctly. There is likely something wrong with your hardware, 
+or your software implementation is not correct.
+
+### 1107-0: Touch Sync Board Param Fixed { #1107-0 }
+Unsure, assume it has something to do with trying to write a parameter on the sync board which is read-only.
+
+### 1107-1: Touch Sync Board Param Write Failed { #1107-1 }
+Unsure, assume it has something to do with failing to write a sync board parameter.
+
+### 1200-0: Generic LED Error { #1200-0 }
+LED controller threw an exception. Not really useful. Check consoles?
+
+### 1201-1: Failed to find LED DLL { #1201-1 }
+The LED DLL (`USBIntLED.dll`) was not found. Make sure it's exists in 
+`WindowsNoEditor\Mercury\Plugins\ElizabethPlugin\Source\LEDDevice\Source\Runtime\Public\Externals\`.
+
+### 1201-2: Failed to load LED DLL { #1201-2 }
+The LED DLL could not be loaded. This is typically due to architecture mismatch on the DLL and the game. Make sure the
+DLL was compiled as x86-64.
+
+### 1202-1: Failed to init LED DLL { #1202-1 }
+The LED DLL could not be initialized. This either means that the hardware check failed, or the init method was not found.
+
+### 1203-1: Invalid LED configuration { #1203-1 }
+The LED DLL doesn't like how you've configured your LEDs. Typically, you won't ever see this.
+
+### 1300-0: Generic Title Server Error { #1300-0 }
+The game is unhappy about how the title server responded. Check your networking.
+
+### 1301-1: Title Server Get Housing ID Failed { #1301-1 }
+The title server failed to provide you with a housing (cab) ID. Check your networking. This might also mean your cab is
+banned from the server.
+
+### 1302-1: Title Server Get Area ID Failed { #1302-1 }
+The title server failed to provide you with an area ID. Check your networking. This might also mean your cab is banned
+from the server.
+
+### 1900-0: Generic Network Error { #1900-0 }
+There was an error with the network. Check your network? Restart the game?
+
+### 1901-1: Network Error (IP Address) { #1901-1 }
+IP address was not assigned to this machine. Check your network DHCP settings.
+
+### 1902-1: Network Error (Gateway) { #1902-1 }
+Network gateway was not assigned or not valid. Check your network DHCP settings.
+
+### 1903-1: Network Error (DNS) { #1903-1 }
+DNS lookup failed. Check your network settings, and also make sure that they are pointed to the right server.
+
+### 1904-1: Network Error (Hops) { #1904-1 }
+Too many hops between the auth server and you. This should not ever happen in a properly configured network.
+
+### 1905-1: Network Error (Line Type) { #1905-1 }
+The DNS resolved for a router on a line type that is invalid for this game configuration. This shouldn't happen.
+
+### 1906-1: Network Error (ALL.Net Auth) { #1906-1 }
+Connection to auth server was not successful. This could either mean it could not connect to the server at all, or you
+were forcefully kicked off for not being validated on the server you're connecting to.
+
+### 4105-0: Unexpected Error { #4105-0 }
+AMDaemon is angry. If you're running data, check the AMDaemon window for anything that says `Runtime exception occured.`
+
+### 6501-0: Card Reader Not Found { #6501-0 }
+The game was unable to detect your card reader. Ensure you have a reader connected, and that the game configuration
+and the reader have a matching baud rate configured.
+
+## AMDaemon Errors
+
+This section is only relevant if you're running data. If not, you shouldn't really be getting these errors anyway???
+
+### amGfetcherInit(). ErrCode -1 { #amGfetcherInit }
+
+ICF1 file was not found. Make sure you have one in the `bin/amfs` folder. When adding one, make sure to delete `sysfile.dat`,
+as it must be regenerated with the data in the ICF file.
+
+TODO: links to ICF files
+
+### amSysFileInitEx(). ErrCode -5 { #amSysFileInitEx }
+
+`sysfile.dat` failed to be written. Make sure `bin/amfs` folder is writable.
+
+### CreateFileMappingW failed. { #CreateFileMappingW }
+
+Computer hostname and account username cannot be identical. Change the hostname of the machine to something other
+than the username.
+
diff --git a/docs/guide/test-menu.md b/docs/info/test-menu.md
similarity index 100%
rename from docs/guide/test-menu.md
rename to docs/info/test-menu.md
diff --git a/mkdocs.yml b/mkdocs.yml
index 4d9b6aa..8a58665 100644
--- a/mkdocs.yml
+++ b/mkdocs.yml
@@ -46,8 +46,7 @@ nav:
   - Home: index.md
   - Info:
     - "The DiVER's Guide": guide.md
-    - Guides: 
-      - Test Menu: guide/test-menu.md
+    - Guides:
       - Replacing LED Boards: guide/led-replace.md
       - DIY LED Boards:      guide/led-pcb.md
       - ALLS Drive Imaging: guide/alls-image.md
@@ -62,4 +61,6 @@ nav:
     - Tools:
       - WACCA Launcher: launcher.md
     - Reference:
+      - Test Menu: info/test-menu.md
+      - Error Dictionary: info/errors.md
       - Table Map: info/data/tables.md