mirror of
https://github.com/two-torial/two-torial.git
synced 2026-10-12 01:28:09 +03:00
12 KiB
12 KiB
!!! danger "Please make sure you downloaded your data from an appropriate source.
This guide is unable to troubleshoot any problems related to bad or poorly managed data."
!!! danger "If you're coming from a previous version of maimai DX"
Create a new folder for the game and start from scratch.
maimai DX **DOES NOT** like being extracted over old data!
Preparing data
!!! danger "There are currently issues with running game data in the E:\ or Y:\ drive.
Please extract the data into other drives."
!!! tip ""
After downloading and extracting your data, we need to make sure your files
are not set to `Read-only`.
- Right click the folder containing your data, then click on `Properties`.
- In the `General` tab go down to `Attributes`, untick `Read-only` and click `Apply`.
- A popup will appear, select `Apply changes to this folder, subfolder and files`and press `OK`.
- Finally, click `OK` again to exit out of properties.
You should end up with a file structure as follows.
<img width="500" src="/img/sega/maimaidx/common/setup/rootdir.png">
Create two new empty folders named `appdata` and `amfs` (and the folder `option` if not present) next to them as shown below:
<img width="500" src="/img/sega/maimaidx/common/setup/rootdir2.png">
The `App` folder should have a file structure as follows.
<img width="500" src="/img/sega/maimaidx/common/setup/appdir.png">
??? warning "If your data doesn't look like this"
If your data looks like the third image:
- Create an `App` folder and move all files and folders from the image inside of it.
- Create empty folders named `amfs`, `Option` and `AppData` next to the `App` folder.
If extra files are present next to your folders, such as executables, scripts, etc..
**remove them. This also means your data was tampered with and we strongly recommend
getting new data from somewhere else.**
Updating the base game
!!! tip ""
Extract your patch's files to your existing data in a way that matches its
file structure. Agree to overwrite files if necessary.
Installing option data
!!! tip ""
maimai DX content updates are distributed through option folders instead of patching
the base game.
Options are named with a letter followed by three numbers.
For JPN(SDEZ) data, each new release of maimai DX increments the first letter of the Option (ie. BUDDiES is `H???` and BUDDiES+ is `I???`).
For EXP(SDGA) data, Options will always begin with the letter `A` (i.e `A???`)
Extract any options you've downloaded into the `Option` folder. You should end up with
a file structure as follows. **Do not be worried if you have fewer or more option folders.**
<img width="500" src="/img/sega/maimaidx/common/setup/options.png">
!!! warning "Do not mix option data between versions"
Installing unprotected executables
!!! tip ""
maimai DX executables are protected and will not run on a regular computer.
Obtain unprotected (also called "unpacked" or "decrypted" by the community)
copies of the following files and the associated configuration file:
- amdaemon.exe
- Sinmai.exe
- Sinmai_Data/Plugins/amdaemon_api.dll
- Sinmai_Data/Plugins/Cake.dll (JPN/SDEZ only)
- Sinmai_Data/Managed/AMDaemon.NET.dll
- Sinmai_Data/Managed/Assembly-CSharp.dll
- mai2.ini
Copy the files and folders into the `App/Package` folder of your game data. Agree to overwrite
when asked.
!!! Warning "Assembly-CSharp Notes"
`Assembly-CSharp.dll` **must** match your game version. All others can be
reused from other game versions.
Installing ICFs
!!! tip ""
Install Configuration Files (ICFs) tell the game what version it is.
**Without this your game cannot go online!**
**If your unprotected executables came with an `amfs` folder, and already has a file named `ICF1` in it, skip this step.**
Otherwise, obtain copies of `ICF1` for your game version and place it in
the `amfs` folder. If it is named something else, rename it to exactly
`ICF1` **without any file extensions.**
!!! info "Showing file extensions"
By default, file extensions on Windows are hidden. Enable them by navigating to
the `View` tab in File Explorer and select `File name extensions`.
mai2.ini
!!! tip ""
Ensure that the App\Package folder contains mai2.ini.
If this configuration file is missing, create one using the contents below.
```ini
[Debug]
Debug=1
[AM]
Target=0
IgnoreError=1
DummyTouchPanel=1
DummyLED=1
DummyCodeCamera=1
DummyPhotoCamera=1
[Sound]
Sound8Ch=0
```
Installing segatools
!!! tip ""
- Head over to [segatools releases](https://gitea.tendokyu.moe/TeamTofuShop/segatools/releases/tag/2024-03-13)
and download the `segatools.zip` from `2024-03-13`. **Do not download the source code or latest release.**
- Extracting the archive should give you a few more zip files. Find `mai2.zip`
and extract it to the `App/Package` folder in your game data.
You should now have a few more files inside the `App/Package` folder, as highlighted:
<img width="500" src="/img/sega/maimaidx/common/setup/segatools.png">
!!! warning
The latest release of segatools currently has issues with maimai, and for the time being an older version of segatools is preferred.
Configuring segatools
!!! tip ""
Since there is no graphical configuration tool for segatools, you will have to edit the
configuration file by hand. It is found in `App\package\segatools.ini`.
It is recommended that you follow along using a text editor with syntax highlighting such as [Notepad++](https://notepad-plus-plus.org/).
Each following sub-section will correspond to a section in `segatools.ini`. If any
section is not mentioned, you can skip them.
!!! warning
If a key already exists in the section, delete everything after `=` and replace it with your
setting. Do not add another key.
```ini
[gpio]
dipsw1=1
dipsw1=1 ; WRONG!
```
[vfs]
!!! tip ""
If you've been matching the file structure as described in the [Preparing data](#preparing-data)
section, you can fill in this section with the values below:
```ini
[vfs]
amfs=../../amfs
option=../../Option
appdata=../../AppData
```
??? tip "AquaMai"
It's strongly recommended to use MelonLoader mods to improve QOL.
You can find info about the available mods for maimai here [AquaMai](https://github.com/MewoLab/AquaMai).
For general modding check [Unity modding](/extras/unity.md) page.
Setting launch options
!!! tip ""
Right click App\package\start.bat, select Edit. Locate the line that launches sinmai and edit it according to your preferences:
```bat hl_lines="6"
@echo off
pushd %~dp0
start "AM Daemon" /min inject -d -k mai2hook.dll amdaemon.exe -f -c config_common.json config_server.json config_client.json
inject -d -k mai2hook.dll sinmai -screen-fullscreen 0 -popupwindow -screen-width 2160 -screen-height 1920 -silent-crashes
taskkill /f /im amdaemon.exe > nul 2>&1
echo.
echo Game processes have terminated
pause
```
??? tip "Launch options"
* -screen-fullscreen 0: windowed
* -screen-fullscreen 0 -popupwindow: borderless windowed
* -screen-fullscreen 1: exclusive fullscreen
* -screen-width <W> -screen-height <H>: resolution
* -monitor <N>: the monitor to run the game on
??? info "Getting the monitor index"
Navigate to Windows display settings. Each monitor should be assigned a number.
The monitor index is that number. For example, monitor 2 means -monitor 2.
Connecting to a network
!!! danger "Please choose one of the two solutions, not both!"
??? tip "Remote (Online Network)"
Head to the `[dns]` section inside `segatools.ini`. Set `default` to the address
provided by your network. **Do not add `http://` or `https://` to the address!**
```ini
[dns]
default=network.example
```
Then, head to the `[keychip]` section and add & set `id` to the keychip ID provided by your network:
```ini
[keychip]
subnet=192.168.172.0
id=A69E-XXXXXXXXXXX
```
Finally, you need a card number. Create a file named `aime.txt` inside `App\package\DEVICE` and type in
your 20-digit access code if you already have one, or make one up if you don't. If you're making one
up, the access code **MUST NOT** start with a 3.
<img src="/img/sega/ongeki/common/setup/4_access_code.png">
??? warning "Local (ARTEMiS/AquaDX)"
Both of these options require non-trivial setup. Refer to the official guides for [ARTEMiS](https://gitea.tendokyu.moe/Hay1tsme/artemis/src/branch/develop/docs/INSTALL_WINDOWS.md)
and [AquaDX](https://github.com/hykilpikonna/AquaDX?tab=readme-ov-file#usage-v1-developmental-preview)
to set up a local server.
Pre-launch requirements
!!! info "These steps are required, otherwise your game won't run."
VCRedist & DirectX
!!! tip ""
- Download and install the latest [VCRedist](https://github.com/abbodi1406/vcredist/releases/latest) (`VisualCppRedist_AIO_x86_x64.exe`)
- Download and install the [DirectX End-User Runtimes](https://www.microsoft.com/en-us/download/details.aspx?id=8109)
Audio
!!! tip ""
- Right-click on the volume setting in your taskbar and select `Sounds`.
- Navigate to the `Playback` tab, right click on your default audio device, and click on `Properties`.
- Go to the `Advanced` tab.
- Check both boxes under `Exclusive Mode`.
- Open the `Default Format` dropdown.
- Pick either `16 bit, 48000Hz (DVD Quality)` or `24 bit, 48000Hz (Studio Quality)`, click `Apply`, then `OK`.
<img src="/img/common/audio_16_48.png">
Fixing OpenSSL on Intel 10th Gen and newer CPUs
!!! tip ""
If you have an Intel 10th Gen CPU or newer, you need to [patch amdaemon](https://patcher.two-torial.xyz/amdaemon) and enable `OpenSSL SHA crash bug fix`.
First launch
!!! danger "If you have any issues running the game, refer to the Troubleshooting page."
!!! tip
Without an English patch, the service menu will be in Japanese. If you don't know Japanese, [Google Lens](https://lens.google/)
is a handy tool for navigating this menu.
GAME ASSIGNMENTS
!!! tip ""
If you've followed all instructions correctly, you're now finally ready to launch the game!
Start the game by running `App\package\start.bat`. Let the game load until you reach a screen with the message below.
!!! tip ""
Press your `Test` button (default `F1`) to enter the service menu. Use the `Service` button
(default `F2`) to navigate the menu, and `Test` button to select an option.
Navigate to **ゲーム設定** (`GAME ASSIGNMENTS`, the 7th option).
!!! tip ""
Select **店内マッチングの設定** (`IN-STORE MATCHING SETUP`, the first option)
and toggle this setting to **OFF**.
!!! tip ""
Select **終了** (`EXIT`, the last option) to exit to the main service menu.
Custom Mods
!!! info "Mods are covered on the Unity modding page."
Controllers and Troubleshooting
!!! info "Input methods and controllers are covered in the Controllers page."
!!! warning "Have any other issues?"
Check out the [Troubleshooting](troubleshooting.md) and [Error Codes](/errorcodes/sega.md) pages.