Albert Phan
de9fb2d9c0
attach() is now called the first time update() is run so the pin setup is before attach(). I also removed previous_millis_retrigger to save 4 bytes. Also updated retrigger.ino example with a few more comments.
82 lines
1.9 KiB
Arduino
82 lines
1.9 KiB
Arduino
|
|
/*
|
|
DESCRIPTION
|
|
====================
|
|
Example of the retrigger() function of the Bounce 2 library. This function will retrigger a HIGH value after
|
|
the button has been held on for at least the hold interval (default 500 ms) and then retrigger every retrigger_interval afterwards (default 50ms)
|
|
This function is great for editing values without repeatedly pressing the button.
|
|
Open the Serial Monitor (57600 baud) for debug messages.
|
|
|
|
*/
|
|
|
|
// Include the Bounce2 library found here :
|
|
// https://github.com/thomasfredericks/Bounce-Arduino-Wiring
|
|
|
|
#include <Bounce2.h>
|
|
|
|
#define BUTTON_PIN 2
|
|
#define LED_PIN 13
|
|
|
|
#define DEBOUNCE_TIME 5
|
|
#define HOLD_TIME 1000
|
|
#define RETRIGGER_TIME 100
|
|
|
|
// Instantiate a Bounce object with default values
|
|
Bounce debouncer(BUTTON_PIN);
|
|
|
|
// Or set your own values when instantiating Bounce object
|
|
// Bounce debouncer(BUTTON_PIN,DEBOUNCE_TIME, RETRIGGER_TIME, HOLD_TIME);
|
|
|
|
unsigned long buttonPressTimeStamp;
|
|
unsigned char ledState = 0;
|
|
|
|
void setup() {
|
|
Serial.begin(57600);
|
|
|
|
// Setup the button
|
|
pinMode(BUTTON_PIN,INPUT);
|
|
|
|
//Setup the LED
|
|
pinMode(LED_PIN,OUTPUT);
|
|
digitalWrite(LED_PIN,LOW);
|
|
|
|
}
|
|
|
|
void loop() {
|
|
// Update the debouncer
|
|
debouncer.update();
|
|
|
|
// If button had a rising transition, turn on led.
|
|
if(debouncer.rose())
|
|
{
|
|
ledState = 1;
|
|
digitalWrite(LED_PIN, ledState);
|
|
buttonPressTimeStamp = millis();
|
|
Serial.print(buttonPressTimeStamp);
|
|
Serial.println(" Button rose!");
|
|
}
|
|
// After holding down the button, retrigger returns a 1 every interval_hold (default = 50 ms)
|
|
if (debouncer.retrigger())
|
|
{
|
|
buttonPressTimeStamp = millis();
|
|
Serial.print(buttonPressTimeStamp);
|
|
Serial.println(" Button retriggered!");
|
|
|
|
ledState = !ledState;
|
|
digitalWrite(LED_PIN, ledState);
|
|
}
|
|
// When button has a falling transition, turn off led.
|
|
if(debouncer.fell())
|
|
{
|
|
ledState = 0;
|
|
digitalWrite(LED_PIN, ledState);
|
|
buttonPressTimeStamp = millis();
|
|
Serial.print(buttonPressTimeStamp);
|
|
Serial.println(" Button fell!");
|
|
}
|
|
|
|
|
|
}
|
|
|
|
|