diff --git a/README.md b/README.md
index 38fdfda..fc4495b 100644
--- a/README.md
+++ b/README.md
@@ -9,7 +9,7 @@ Currently working/fixed:
 - HID LEDs with Reactive LED fallback
 - sdvx/iidx spoof - Tested on EAC
 - 1000hz polling
-- Reversable Encoders
+- Reversable Encoders with debouncing
 - Switch and LED pins are now staggered for easier wiring
 - Fix 0-~71% encoder rollover in gamepad mode, uint32 max val isn't divisible evenly by ppr\*4 for joystick - thanks friends
 
@@ -39,3 +39,4 @@ Thanks to:
 - https://github.com/Drewol/rp2040-gamecon for usb gamepad descriptor info.
 - https://github.com/veroxzik/arduino-konami-spoof for konami spoof usb descriptor info.
 - https://github.com/veroxzik/roxy-firmware for nkro descriptor and logic info.
+- KyubiFox for bringing clkdiv to my attention for encoder debouncing
\ No newline at end of file
diff --git a/build_uf2/Pico_Game_Controller.uf2 b/build_uf2/Pico_Game_Controller.uf2
index 048bd73..87b216c 100644
Binary files a/build_uf2/Pico_Game_Controller.uf2 and b/build_uf2/Pico_Game_Controller.uf2 differ
diff --git a/src/encoders.pio b/src/encoders.pio
index aa32893..c269748 100644
--- a/src/encoders.pio
+++ b/src/encoders.pio
@@ -34,7 +34,7 @@ send:
 .wrap
 
 % c-sdk {
-static inline void encoders_program_init(PIO pio, uint sm, uint offset, uint pin) {
+static inline void encoders_program_init(PIO pio, uint sm, uint offset, uint pin, bool debounce) {
     pio_sm_set_consecutive_pindirs(pio, sm, pin, 2, false);
     pio_gpio_init(pio, pin);
     pio_gpio_init(pio, pin+1);
@@ -46,6 +46,10 @@ static inline void encoders_program_init(PIO pio, uint sm, uint offset, uint pin
     sm_config_set_jmp_pin(&c, pin +1);
     // Shift to left, autopull disabled
     sm_config_set_in_shift(&c, false, false, 2);
+    
+    // Debounce via reduced clock
+    if (debounce)
+        sm_config_set_clkdiv(&c, 5000);
 
     pio_sm_init(pio, sm, offset, &c);
     pio_sm_set_enabled(pio, sm, true);
diff --git a/src/pico_game_controller.c b/src/pico_game_controller.c
index 119d81c..aa6848c 100644
--- a/src/pico_game_controller.c
+++ b/src/pico_game_controller.c
@@ -16,9 +16,11 @@
 #include "tusb.h"
 #include "usb_descriptors.h"
 
-#define SW_GPIO_SIZE 11               // Number of switches
-#define ENC_GPIO_SIZE 2               // Number of encoders
-#define ENC_PPR 600                   // Encoder PPR
+#define SW_GPIO_SIZE 11    // Number of switches
+#define ENC_GPIO_SIZE 2    // Number of encoders
+#define ENC_PPR 600        // Encoder PPR
+#define ENC_DEBOUNCE true  // Encoder Debouncing
+
 #define ENC_PULSE (ENC_PPR * 4)       // 4 pulses per PPR
 #define ENC_ROLLOVER (ENC_PULSE * 2)  // Delta Rollover threshold
 #define REACTIVE_TIMEOUT_MAX 100000  // Cycles before HID falls back to reactive
@@ -270,7 +272,7 @@ void init() {
     enc_val[i] = 0;
     prev_enc_val[i] = 0;
     cur_enc_val[i] = 0;
-    encoders_program_init(pio, i, offset, ENC_GPIO[i]);
+    encoders_program_init(pio, i, offset, ENC_GPIO[i], ENC_DEBOUNCE);
 
     dma_channel_config c = dma_channel_get_default_config(i);
     channel_config_set_read_increment(&c, false);