mirror of
https://github.com/skogaby/OpeNITHM.git
synced 2026-10-11 08:48:15 +03:00
veroxzik
514ab9740b
Changed pin names to match schematic and PCB per mickabrig7 Changed default pins numbers to match PCB Added ability to use digitalRead for IR sensors Changes tabs to 2 spaces (consistent with Arduino standard) Fixes build for 32U4 based processors (SerialOutput.h/.cpp is untested)
233 lines
9.0 KiB
C++
233 lines
9.0 KiB
C++
/*
|
|
CapacitiveSense.h v.04 - Capacitive Sensing Library for 'duino / Wiring
|
|
https://github.com/PaulStoffregen/CapacitiveSensor
|
|
http://www.pjrc.com/teensy/td_libs_CapacitiveSensor.html
|
|
http://playground.arduino.cc/Main/CapacitiveSensor
|
|
Copyright (c) 2008 Paul Bagder All rights reserved.
|
|
Version 05 by Paul Stoffregen - Support non-AVR board: Teensy 3.x, Arduino Due
|
|
Version 04 by Paul Stoffregen - Arduino 1.0 compatibility, issue 146 fix
|
|
vim: set ts=4:
|
|
*/
|
|
|
|
// ensure this library description is only included once
|
|
#ifndef CapacitiveSensor_h
|
|
#define CapacitiveSensor_h
|
|
|
|
#if ARDUINO >= 100
|
|
#include "Arduino.h"
|
|
#else
|
|
#include "WProgram.h"
|
|
#endif
|
|
|
|
// Direct I/O through registers and bitmask (from OneWire library)
|
|
|
|
#if defined(__AVR__)
|
|
#define PIN_TO_BASEREG(pin) (portInputRegister(digitalPinToPort(pin)))
|
|
#define PIN_TO_BITMASK(pin) (digitalPinToBitMask(pin))
|
|
#define IO_REG_TYPE uint8_t
|
|
#define DIRECT_READ(base, mask) (((*(base)) & (mask)) ? 1 : 0)
|
|
#define DIRECT_MODE_INPUT(base, mask) ((*((base)+1)) &= ~(mask), (*((base)+2)) &= ~(mask))
|
|
#define DIRECT_MODE_OUTPUT(base, mask) ((*((base)+1)) |= (mask))
|
|
#define DIRECT_WRITE_LOW(base, mask) ((*((base)+2)) &= ~(mask))
|
|
#define DIRECT_WRITE_HIGH(base, mask) ((*((base)+2)) |= (mask))
|
|
|
|
#elif defined(__MK20DX128__) || defined(__MK20DX256__) || defined(__MK66FX1M0__) || defined(__MK64FX512__)
|
|
#define PIN_TO_BASEREG(pin) (portOutputRegister(pin))
|
|
#define PIN_TO_BITMASK(pin) (1)
|
|
#define IO_REG_TYPE uint8_t
|
|
#define IO_REG_ASM
|
|
#define DIRECT_READ(base, mask) (*((base)+512))
|
|
#define DIRECT_MODE_INPUT(base, mask) (*((base)+640) = 0)
|
|
#define DIRECT_MODE_OUTPUT(base, mask) (*((base)+640) = 1)
|
|
#define DIRECT_WRITE_LOW(base, mask) (*((base)+256) = 1)
|
|
#define DIRECT_WRITE_HIGH(base, mask) (*((base)+128) = 1)
|
|
|
|
#elif defined(__MKL26Z64__)
|
|
#define PIN_TO_BASEREG(pin) (portOutputRegister(pin))
|
|
#define PIN_TO_BITMASK(pin) (digitalPinToBitMask(pin))
|
|
#define IO_REG_TYPE uint8_t
|
|
#define IO_REG_ASM
|
|
#define DIRECT_READ(base, mask) ((*((base)+16) & (mask)) ? 1 : 0)
|
|
#define DIRECT_MODE_INPUT(base, mask) (*((base)+20) &= ~(mask))
|
|
#define DIRECT_MODE_OUTPUT(base, mask) (*((base)+20) |= (mask))
|
|
#define DIRECT_WRITE_LOW(base, mask) (*((base)+8) = (mask))
|
|
#define DIRECT_WRITE_HIGH(base, mask) (*((base)+4) = (mask))
|
|
|
|
#elif defined(__SAM3X8E__)
|
|
#define PIN_TO_BASEREG(pin) (&(digitalPinToPort(pin)->PIO_PER))
|
|
#define PIN_TO_BITMASK(pin) (digitalPinToBitMask(pin))
|
|
#define IO_REG_TYPE uint32_t
|
|
#define IO_REG_ASM
|
|
#define DIRECT_READ(base, mask) (((*((base)+15)) & (mask)) ? 1 : 0)
|
|
#define DIRECT_MODE_INPUT(base, mask) ((*((base)+5)) = (mask))
|
|
#define DIRECT_MODE_OUTPUT(base, mask) ((*((base)+4)) = (mask))
|
|
#define DIRECT_WRITE_LOW(base, mask) ((*((base)+13)) = (mask))
|
|
#define DIRECT_WRITE_HIGH(base, mask) ((*((base)+12)) = (mask))
|
|
|
|
#elif defined(__PIC32MX__)
|
|
#define PIN_TO_BASEREG(pin) (portModeRegister(digitalPinToPort(pin)))
|
|
#define PIN_TO_BITMASK(pin) (digitalPinToBitMask(pin))
|
|
#define IO_REG_TYPE uint32_t
|
|
#define IO_REG_ASM
|
|
#define DIRECT_READ(base, mask) (((*(base+4)) & (mask)) ? 1 : 0) //PORTX + 0x10
|
|
#define DIRECT_MODE_INPUT(base, mask) ((*(base+2)) = (mask)) //TRISXSET + 0x08
|
|
#define DIRECT_MODE_OUTPUT(base, mask) ((*(base+1)) = (mask)) //TRISXCLR + 0x04
|
|
#define DIRECT_WRITE_LOW(base, mask) ((*(base+8+1)) = (mask)) //LATXCLR + 0x24
|
|
#define DIRECT_WRITE_HIGH(base, mask) ((*(base+8+2)) = (mask)) //LATXSET + 0x28
|
|
|
|
#elif defined(ARDUINO_ARCH_ESP8266)
|
|
#define PIN_TO_BASEREG(pin) (portOutputRegister(digitalPinToPort(pin)))
|
|
#define PIN_TO_BITMASK(pin) (digitalPinToBitMask(pin))
|
|
#define IO_REG_TYPE uint32_t
|
|
#define IO_REG_ASM
|
|
#define DIRECT_READ(base, mask) (((*(base+6)) & (mask)) ? 1 : 0) //GPIO_IN_ADDRESS
|
|
#define DIRECT_MODE_INPUT(base, mask) ((*(base+5)) = (mask)) //GPIO_ENABLE_W1TC_ADDRESS
|
|
#define DIRECT_MODE_OUTPUT(base, mask) ((*(base+4)) = (mask)) //GPIO_ENABLE_W1TS_ADDRESS
|
|
#define DIRECT_WRITE_LOW(base, mask) ((*(base+2)) = (mask)) //GPIO_OUT_W1TC_ADDRESS
|
|
#define DIRECT_WRITE_HIGH(base, mask) ((*(base+1)) = (mask)) //GPIO_OUT_W1TS_ADDRESS
|
|
|
|
#elif defined(__SAMD21G18A__)
|
|
// runs extremely slow/unreliable on Arduino Zero - help wanted....
|
|
#define PIN_TO_BASEREG(pin) portModeRegister(digitalPinToPort(pin))
|
|
#define PIN_TO_BITMASK(pin) (digitalPinToBitMask(pin))
|
|
#define IO_REG_TYPE uint32_t
|
|
#define IO_REG_ASM
|
|
#define DIRECT_READ(base, mask) (((*((base)+8)) & (mask)) ? 1 : 0)
|
|
#define DIRECT_MODE_INPUT(base, mask) ((*((base)+1)) = (mask))
|
|
#define DIRECT_MODE_OUTPUT(base, mask) ((*((base)+2)) = (mask))
|
|
#define DIRECT_WRITE_LOW(base, mask) ((*((base)+5)) = (mask))
|
|
#define DIRECT_WRITE_HIGH(base, mask) ((*((base)+6)) = (mask))
|
|
|
|
#elif defined(RBL_NRF51822)
|
|
#define PIN_TO_BASEREG(pin) (0)
|
|
#define PIN_TO_BITMASK(pin) (pin)
|
|
#define IO_REG_TYPE uint32_t
|
|
#define IO_REG_ASM
|
|
#define DIRECT_READ(base, pin) nrf_gpio_pin_read(pin)
|
|
#define DIRECT_WRITE_LOW(base, pin) nrf_gpio_pin_clear(pin)
|
|
#define DIRECT_WRITE_HIGH(base, pin) nrf_gpio_pin_set(pin)
|
|
#define DIRECT_MODE_INPUT(base, pin) nrf_gpio_cfg_input(pin, NRF_GPIO_PIN_NOPULL)
|
|
#define DIRECT_MODE_OUTPUT(base, pin) nrf_gpio_cfg_output(pin)
|
|
|
|
#elif defined(__arc__)
|
|
|
|
#include "scss_registers.h"
|
|
#include "portable.h"
|
|
#include "avr/pgmspace.h"
|
|
|
|
#define GPIO_ID(pin) (g_APinDescription[pin].ulGPIOId)
|
|
#define GPIO_TYPE(pin) (g_APinDescription[pin].ulGPIOType)
|
|
#define GPIO_BASE(pin) (g_APinDescription[pin].ulGPIOBase)
|
|
#define DIR_OFFSET_SS 0x01
|
|
#define DIR_OFFSET_SOC 0x04
|
|
#define EXT_PORT_OFFSET_SS 0x0A
|
|
#define EXT_PORT_OFFSET_SOC 0x50
|
|
|
|
/* GPIO registers base address */
|
|
#define PIN_TO_BASEREG(pin) ((volatile uint32_t *)g_APinDescription[pin].ulGPIOBase)
|
|
#define PIN_TO_BITMASK(pin) pin
|
|
#define IO_REG_TYPE uint32_t
|
|
#define IO_REG_ASM
|
|
|
|
static inline __attribute__((always_inline))
|
|
IO_REG_TYPE directRead(volatile IO_REG_TYPE *base, IO_REG_TYPE pin)
|
|
{
|
|
IO_REG_TYPE ret;
|
|
if (SS_GPIO == GPIO_TYPE(pin)) {
|
|
ret = READ_ARC_REG(((IO_REG_TYPE)base + EXT_PORT_OFFSET_SS));
|
|
} else {
|
|
ret = MMIO_REG_VAL_FROM_BASE((IO_REG_TYPE)base, EXT_PORT_OFFSET_SOC);
|
|
}
|
|
return ((ret >> GPIO_ID(pin)) & 0x01);
|
|
}
|
|
|
|
static inline __attribute__((always_inline))
|
|
void directModeInput(volatile IO_REG_TYPE *base, IO_REG_TYPE pin)
|
|
{
|
|
if (SS_GPIO == GPIO_TYPE(pin)) {
|
|
WRITE_ARC_REG(READ_ARC_REG((((IO_REG_TYPE)base) + DIR_OFFSET_SS)) & ~(0x01 << GPIO_ID(pin)),
|
|
((IO_REG_TYPE)(base) + DIR_OFFSET_SS));
|
|
} else {
|
|
MMIO_REG_VAL_FROM_BASE((IO_REG_TYPE)base, DIR_OFFSET_SOC) &= ~(0x01 << GPIO_ID(pin));
|
|
}
|
|
}
|
|
|
|
static inline __attribute__((always_inline))
|
|
void directModeOutput(volatile IO_REG_TYPE *base, IO_REG_TYPE pin)
|
|
{
|
|
if (SS_GPIO == GPIO_TYPE(pin)) {
|
|
WRITE_ARC_REG(READ_ARC_REG(((IO_REG_TYPE)(base) + DIR_OFFSET_SS)) | (0x01 << GPIO_ID(pin)),
|
|
((IO_REG_TYPE)(base) + DIR_OFFSET_SS));
|
|
} else {
|
|
MMIO_REG_VAL_FROM_BASE((IO_REG_TYPE)base, DIR_OFFSET_SOC) |= (0x01 << GPIO_ID(pin));
|
|
}
|
|
}
|
|
|
|
static inline __attribute__((always_inline))
|
|
void directWriteLow(volatile IO_REG_TYPE *base, IO_REG_TYPE pin)
|
|
{
|
|
if (SS_GPIO == GPIO_TYPE(pin)) {
|
|
WRITE_ARC_REG(READ_ARC_REG(base) & ~(0x01 << GPIO_ID(pin)), base);
|
|
} else {
|
|
MMIO_REG_VAL(base) &= ~(0x01 << GPIO_ID(pin));
|
|
}
|
|
}
|
|
|
|
static inline __attribute__((always_inline))
|
|
void directWriteHigh(volatile IO_REG_TYPE *base, IO_REG_TYPE pin)
|
|
{
|
|
if (SS_GPIO == GPIO_TYPE(pin)) {
|
|
WRITE_ARC_REG(READ_ARC_REG(base) | (0x01 << GPIO_ID(pin)), base);
|
|
} else {
|
|
MMIO_REG_VAL(base) |= (0x01 << GPIO_ID(pin));
|
|
}
|
|
}
|
|
|
|
#define DIRECT_READ(base, pin) directRead(base, pin)
|
|
#define DIRECT_MODE_INPUT(base, pin) directModeInput(base, pin)
|
|
#define DIRECT_MODE_OUTPUT(base, pin) directModeOutput(base, pin)
|
|
#define DIRECT_WRITE_LOW(base, pin) directWriteLow(base, pin)
|
|
#define DIRECT_WRITE_HIGH(base, pin) directWriteHigh(base, pin)
|
|
|
|
#endif
|
|
|
|
// some 3.3V chips with 5V tolerant pins need this workaround
|
|
//
|
|
#if defined(__MK20DX256__)
|
|
#define FIVE_VOLT_TOLERANCE_WORKAROUND
|
|
#endif
|
|
|
|
|
|
// library interface description
|
|
class CapacitiveSensor
|
|
{
|
|
// user-accessible "public" interface
|
|
public:
|
|
// methods
|
|
CapacitiveSensor(uint8_t sendPin, uint8_t receivePin1, uint8_t receivePin2);
|
|
unsigned int* sense(uint8_t samples);
|
|
// library-accessible "private" interface
|
|
private:
|
|
// variables
|
|
int error;
|
|
unsigned long leastTotal;
|
|
unsigned int loopTimingFactor;
|
|
unsigned long CS_Timeout_Millis;
|
|
unsigned int total1;
|
|
unsigned int total2;
|
|
unsigned int *retVal;
|
|
bool pin1State;
|
|
bool pin2State;
|
|
|
|
IO_REG_TYPE sBit; // send pin's ports and bitmask
|
|
volatile IO_REG_TYPE *sReg;
|
|
IO_REG_TYPE r1Bit; // receive 1 pin's ports and bitmask
|
|
volatile IO_REG_TYPE *r1Reg;
|
|
IO_REG_TYPE r2Bit; // receive 2 pin's ports and bitmask
|
|
volatile IO_REG_TYPE *r2Reg;
|
|
// methods
|
|
int SenseOneCycle(void);
|
|
};
|
|
|
|
#endif
|