Add a single, unified serial processor that can handle both LED updates and config commands. Make lighting mode toggleable during runtime without needing a reflash. Overhaul the analog air sensor thresholding logic to be simpler and more robust. Make the sensitivity for the slider and analog air sensors configurable. Make the serial commands adhere to the format the config tool will use.

2026-10-06 22:08:10 +03:00 · 2020-03-12 00:11:44 -05:00
parent 8bd29905f0
commit 753365b71a
9 changed files with 196 additions and 202 deletions
@@ -0,0 +1,61 @@
+#include "SerialProcessor.h"
+
+SerialProcessor::SerialProcessor()
+{ }
+
+void SerialProcessor::processConfigCommand(uint8_t* buf)
+{
+  // figure out which command we're running
+  switch (buf[2]) 
+  {
+    case CMD_CHANGE_LIGHT_MODE:
+      if (buf[3] == LIGHT_MODE_SERIAL)
+      {
+        useSerialLeds = true;
+
+        // Set LEDs blue for "ready"
+        for (CRGB& led : leds)
+          led = CRGB::Blue;
+          
+        FastLED.show();
+      }
+      else if (buf[3] == LIGHT_MODE_REACTIVE)
+      {
+        useSerialLeds = false;
+      }
+        
+      break;
+    case CMD_CHANGE_ON_COLOR:
+      led_on.r = buf[3];
+      led_on.g = buf[4];
+      led_on.b = buf[5];
+      break;
+    case CMD_CHANGE_OFF_COLOR:
+      led_off.r = buf[3];
+      led_off.g = buf[4];
+      led_off.b = buf[5];
+      break;
+    case CMD_CALIBRATE_SLIDER:
+      touchboard->setSensitivity(buf[3]);
+      touchboard->calibrateKeys(true);
+      break;
+    case CMD_CALIBRATE_AIR_SENSORS:
+      sensor->setAnalogSensitivity(buf[3]);
+      sensor->recalibrate();
+      break;
+    default:
+      break;
+  }
+}
+
+void SerialProcessor::processBulk(uint8_t *buf)
+{
+  if (buf[0] == LED_FLAG && buf[1] == LED_FLAG)
+  {
+    serialLeds.processBulk(buf);
+  }
+  else if (buf[0] == CONFIG_FLAG && buf[1] == CONFIG_FLAG)
+  {
+    processConfigCommand(buf);
+  }
+}