diff --git a/Firmware/Bootloader/Descriptors.c b/Firmware/Bootloader/Descriptors.c
index e9aacd8..e79ac4c 100644
--- a/Firmware/Bootloader/Descriptors.c
+++ b/Firmware/Bootloader/Descriptors.c
@@ -2,7 +2,7 @@
 
 const USB_Descriptor_URL_t ConfigURL = URL_STRING_DESCRIPTOR(URL_HTTPS, "mon.im");
 const USB_Descriptor_URL_t LocalhostURL = URL_STRING_DESCRIPTOR(URL_HTTP, "localhost");
-const USB_Descriptor_String_t ProductString = USB_STRING_DESCRIPTOR(L"VoltexBoot");
+const USB_Descriptor_String_t ProductString = USB_STRING_DESCRIPTOR(L"Voltex Boot");
 const USB_Descriptor_String_t LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
 
 const uint8_t MS_OS_Descriptor[] =
diff --git a/Firmware/PocketVoltex/Config.h b/Firmware/PocketVoltex/Config.h
index 37641b1..811250d 100644
--- a/Firmware/PocketVoltex/Config.h
+++ b/Firmware/PocketVoltex/Config.h
@@ -45,7 +45,7 @@ typedef struct {
 typedef enum {
     GETCONFIG = 1,
     SETCONFIG = 2,
-    VERSION = 3,
+    VERSION = 3, // synced with bootloader, DO NOT CHANGE
     RESET = MAGIC_RESET_NUMBER
 } command_action_t;
 
diff --git a/Firmware/PocketVoltex/PocketVoltex.c b/Firmware/PocketVoltex/PocketVoltex.c
index a92cc44..d58448c 100644
--- a/Firmware/PocketVoltex/PocketVoltex.c
+++ b/Firmware/PocketVoltex/PocketVoltex.c
@@ -13,10 +13,6 @@
 // D 4,5,6,7
 #define SWITCH_MASKD 0b11110000
 
-#define MAGIC_BOOT_KEY            0xDEADBE7A
-// offset * word size
-#define BOOTLOADER_START_ADDRESS  (0x1c00 * 2)
-
 // How long to wait before moving to internal lighting
 #define HID_LED_TIMEOUT 2000
 
@@ -94,26 +90,11 @@ static uint8_t switchesChanged = 1;
 // Set to max already so we have our init flash
 static uint16_t hidTimeout = HID_LED_TIMEOUT;
 
-uint32_t Boot_Key ATTR_NO_INIT;
-
-void Bootloader_Jump_Check(void) ATTR_INIT_SECTION(3);
-void Bootloader_Jump_Check(void)
-{
-    // If the reset source was the bootloader and the key is correct, clear it and jump to the bootloader
-    if ((MCUSR & (1 << WDRF)) && (Boot_Key == MAGIC_BOOT_KEY))
-    {
-        Boot_Key = 0;
-        ((void (*)(void))BOOTLOADER_START_ADDRESS)();
-    }
-}
-
 void RebootToBootloader(void) {
-    // With this uncommented, reboot fails. Odd.
-    //USB_Disable();
-    cli();
+	/* Disconnect from the host - USB interface will be reset later along with the AVR */
+	USB_Detach();
 
     // Back to the bootloader
-    Boot_Key = MAGIC_BOOT_KEY;
     wdt_enable(WDTO_250MS);
     while(1);
 }
@@ -246,11 +227,6 @@ void SetupHardware()
     PORTC |= SWITCH_MASKC;
     PORTC &= ~_BV(1); // RESET has its own pullup
     PORTD |= SWITCH_MASKD;
-    
-    // RESET held while plugging in
-    if(!(PINC & _BV(1))) {
-        RebootToBootloader();
-    }
 
     /* Hardware Initialization */
     encoder_init();
diff --git a/Firmware/PocketVoltex/makefile b/Firmware/PocketVoltex/makefile
index 188e7e5..2e981c1 100644
--- a/Firmware/PocketVoltex/makefile
+++ b/Firmware/PocketVoltex/makefile
@@ -54,7 +54,10 @@ rfuse:
 	$(AVRDUDE) -U hfuse:r:-:h -U lfuse:r:-:h -U efuse:r:-:h
 
 wfuse:
-	$(AVRDUDE) -U lfuse:w:0xde:m -U hfuse:w:0x9b:m -U efuse:w:0xf6:m
+	# no more HWB, boot directly to bootloader
+	$(AVRDUDE) -U lfuse:w:0xde:m -U hfuse:w:0xda:m -U efuse:w:0xfe:m
+	# reset disabled
+	#$(AVRDUDE) -U lfuse:w:0xde:m -U hfuse:w:0x9a:m -U efuse:w:0xfe:m
 
 # To make this hex, compile HID Bootloader in LUFA
 # FLASH_SIZE_KB        := 16