123 lines
4.1 KiB
Arduino
123 lines
4.1 KiB
Arduino
/****************************************************************************************************************************
|
|
Argument_Simple.ino
|
|
RPi_Pico_ISR_Timer-Impl.h
|
|
For RP2040-based boards such as RASPBERRY_PI_PICO, ADAFRUIT_FEATHER_RP2040 and GENERIC_RP2040.
|
|
Written by Khoi Hoang
|
|
|
|
Built by Khoi Hoang https://github.com/khoih-prog/RPI_PICO_TimerInterrupt
|
|
Licensed under MIT license
|
|
|
|
The RPI_PICO system timer peripheral provides a global microsecond timebase for the system, and generates
|
|
interrupts based on this timebase. It supports the following features:
|
|
• A single 64-bit counter, incrementing once per microsecond
|
|
• This counter can be read from a pair of latching registers, for race-free reads over a 32-bit bus.
|
|
• Four alarms: match on the lower 32 bits of counter, IRQ on match: TIMER_IRQ_0-TIMER_IRQ_3
|
|
|
|
Now even you use all these new 16 ISR-based timers,with their maximum interval practically unlimited (limited only by
|
|
unsigned long miliseconds), you just consume only one RPI_PICO timer and avoid conflicting with other cores' tasks.
|
|
The accuracy is nearly perfect compared to software timers. The most important feature is they're ISR-based timers
|
|
Therefore, their executions are not blocked by bad-behaving functions / tasks.
|
|
This important feature is absolutely necessary for mission-critical tasks.
|
|
|
|
Based on SimpleTimer - A timer library for Arduino.
|
|
Author: mromani@ottotecnica.com
|
|
Copyright (c) 2010 OTTOTECNICA Italy
|
|
|
|
Based on BlynkTimer.h
|
|
Author: Volodymyr Shymanskyy
|
|
*****************************************************************************************************************************/
|
|
|
|
// These define's must be placed at the beginning before #include "TimerInterrupt_Generic.h"
|
|
// _TIMERINTERRUPT_LOGLEVEL_ from 0 to 4
|
|
// Don't define _TIMERINTERRUPT_LOGLEVEL_ > 0. Only for special ISR debugging only. Can hang the system.
|
|
#define TIMER_INTERRUPT_DEBUG 1
|
|
#define _TIMERINTERRUPT_LOGLEVEL_ 4
|
|
|
|
#include "RPi_Pico_TimerInterrupt.h"
|
|
|
|
#if !defined(LED_BUILTIN)
|
|
#define LED_BUILTIN 25
|
|
#endif
|
|
|
|
unsigned int outputPin1 = LED_BUILTIN;
|
|
unsigned int outputPin2 = 1;
|
|
|
|
// Init RPI_PICO_Timer
|
|
RPI_PICO_Timer ITimer1(1);
|
|
RPI_PICO_Timer ITimer2(2);
|
|
|
|
#define TIMER1_INTERVAL_MS 1000
|
|
|
|
bool TimerHandler1(struct repeating_timer *t)
|
|
{
|
|
static bool toggle1 = false;
|
|
|
|
#if (TIMER_INTERRUPT_DEBUG > 0)
|
|
//timer interrupt toggles pin outputPin1
|
|
Serial.print("Pin"); Serial.print(outputPin1); Serial.println(toggle1 ? F(" ON") : F(" OFF"));
|
|
#endif
|
|
|
|
digitalWrite(outputPin1, toggle1);
|
|
toggle1 = !toggle1;
|
|
|
|
return true;
|
|
}
|
|
|
|
#define TIMER2_INTERVAL_MS 2000
|
|
|
|
bool TimerHandler2(struct repeating_timer *t)
|
|
{
|
|
static bool toggle2 = false;
|
|
|
|
#if (TIMER_INTERRUPT_DEBUG > 0)
|
|
//timer interrupt toggles pin outputPin2
|
|
Serial.print("Pin"); Serial.print(outputPin2); Serial.println(toggle2 ? F(" ON") : F(" OFF"));
|
|
#endif
|
|
|
|
//timer interrupt toggles pin outputPin2
|
|
digitalWrite(outputPin2, toggle2);
|
|
toggle2 = !toggle2;
|
|
|
|
return true;
|
|
}
|
|
|
|
void setup()
|
|
{
|
|
pinMode(outputPin1, OUTPUT);
|
|
pinMode(outputPin2, OUTPUT);
|
|
|
|
Serial.begin(115200);
|
|
while (!Serial);
|
|
|
|
Serial.print(F("\nStarting Argument_Simple on ")); Serial.println(BOARD_NAME);
|
|
Serial.println(RPI_PICO_TIMER_INTERRUPT_VERSION);
|
|
Serial.print(F("CPU Frequency = ")); Serial.print(F_CPU / 1000000); Serial.println(F(" MHz"));
|
|
|
|
if (ITimer1.attachInterruptInterval(TIMER1_INTERVAL_MS * 1000, TimerHandler1))
|
|
{
|
|
Serial.print(F("Starting ITimer1 OK, millis() = ")); Serial.println(millis());
|
|
|
|
#if (TIMER_INTERRUPT_DEBUG > 1)
|
|
Serial.print(F("OutputPin1 = ")); Serial.print(outputPin1);
|
|
#endif
|
|
}
|
|
else
|
|
Serial.println(F("Can't set ITimer1. Select another freq. or timer"));
|
|
|
|
|
|
if (ITimer2.attachInterruptInterval(TIMER2_INTERVAL_MS * 1000, TimerHandler2))
|
|
{
|
|
Serial.print(F("Starting ITimer2 OK, millis() = ")); Serial.println(millis());
|
|
|
|
#if (TIMER_INTERRUPT_DEBUG > 1)
|
|
Serial.print(F("OutputPin2 = ")); Serial.print(outputPin2);
|
|
#endif
|
|
}
|
|
else
|
|
Serial.println(F("Can't set ITimer2. Select another freq. or timer"));
|
|
}
|
|
|
|
void loop()
|
|
{
|
|
}
|