Earle F. Philhower, III
76811d3c66
* Add support for the extra 16 GPIO pins in the menus and core.
* Clean up Generic RP2350 PSRAM ("none" is valid) and flash (other than 16MB) options.
* Add extra GPIO<->peripheral connections
* Add Pimoroni PGA2350 RP2350B-based board
* Pins 32-47 can be used for PIOPrograms
* Avoid hang when PSRAM fails to initialize
* Move libpico to an RP2350B board for SDK (otherwise the SDK drops all GPIOHI support)
Tools directory for the RP2040 Arduino-Pico
get.py
Downloads and installs the toolchain into a GIT clone of the repo. Run
once after the git clone and any time the toolchain JSON file updates.
The dist directory caches downloaded toolchain files.
discovery.py
Run in the background by the IDE to scan for UF2 drives to show in the menus. Normally not run manually by the user.
uf2conv.py
Manages the upload of the UF2 formatted file to the board. Called as part of the IDE upload process. Will optionally send the serial reset signal to get the board into update mode (1200bps connection).
simplesub.py
Very dumb sed-like tool used by the platform scripts to generate the
linker .ld file (replacing the EEPROM location, FS sizes, etc.).
Because we run on Windows, Mac, and Linux, need to provide this and not
rely on existence of sed command.
pyserial
git clone of the PySerial Python3 library to be used by the IDE.
makeboards.py
Generates boards.txt programmatically. Never edit the boards.txt file
manually, use python3 tools/makeboards.py. Change the script
as necessary to add any add'l fields or menus required. Used because the
boards.txt file is very repetitive and it's safer to generate with code
than by hand.
makever.py
Updates the version info prior to a release in platform.txt, package.json, and the version header. Run from root of the repo.
libpico/make-libpico.sh
Builds the libpico.a file as well as the bootloader stage2 binaries. Run whenever the pico-sdk is updated.