Released packages have a post-processing step to allow them to work with IDE
installed toolchains. This was not updated for the RISC-V compiler, so R5 compiles
fail under the release IDE package. Update to call proper compiler path.
Fixes#2510
* Adds RISC-V compilation option to the IDE and Platform.IO.
* Build RP2350-RISCV libpico, libbearssl
* Fix RP2350 BearSSL library (was copied from RP2040, now built for M33)
* New GCC 14.2 toolchain is required (12.4 RISC-V support is borked)
* Newlib locking fixed prototypes
* Manually force all runtime init code into RP2350 binaries
* Add RISC-V to CI
* Remove RP2350 BOOT2.S files, binaries (not used)
* Clean up minor GCC 14.x warnings
* Add RP2350-RISCV OTA build, link
* Add RISC-V FreeRTOS files (configuration still not running, but builds)
* Add basic documentation
Newlib built using `-Os` causes things like `memcpy` to be very slow on the
RP2350 because it uses byte-wise operations. On the RP2040 this doesn't
matter because there is a ROM routine we use instead of the library, but on
the Pico 2 it's almost 10x slower than the optimal method.
Update GCC to 12.4
Update Newlib to 4.4.0
Move to -O2 library compilation
New toolchain looks to add ~10K to RP2350 flash usage (less on the RP2040).
* Adds a menu item for selecting type of ESP wifi type.
* Updated pin definitions to work with ESP hosted.
* Fixed residual debug modification.
* Added ESPHost support library.
* Removed local cloning of ESPHost and added to excluded from CI
* Updated boards.txt
---------
Co-authored-by: Pontus Oldberg <pontus.oldberg@non.se.com>
Split the 1300+ char define-setting line into a multi-line value.
Makes it more maintainable and easier to see when changes needed.
No settings should have been modified.
* Add support for the extra 16 GPIO pins in the menus and core.
* Clean up Generic RP2350 PSRAM ("none" is valid) and flash (other than 16MB) options.
* Add extra GPIO<->peripheral connections
* Add Pimoroni PGA2350 RP2350B-based board
* Pins 32-47 can be used for PIOPrograms
* Avoid hang when PSRAM fails to initialize
* Move libpico to an RP2350B board for SDK (otherwise the SDK drops all GPIOHI support)
* Fix Pio MHZ for RP2350, fix RP2350 generic menus
* Clean up platform.txt IPV4 default
Was never used, but should at least exist for sanity's sake
Fixes#2365
* Migrate RP2040-specific bits to separate dirs
* Add chip to boards.txt, isolate RP2040-specifics
* Add RP2350 boot2, bearssl, and libraries
* Platform.IO adjust to new paths
* Add RPIPICO2 JSON for P.IO
* Add RP2350 to Platform.io
* Update Picotool and OpenOCD for all hosts
* Use picotool to generate UF2s
* Build separate libpico blobs serially
Thanks for the review, @aarturo182 !
* Add RP2350 to CI
* Allow Ethernet/WiFi building for RP2350
* Update Adafruit TinyUSB to latest
* Test skip fix
* Make RP2350 Picotool work. update USB ID
* Fix EEPROM/FS flash locations
RP2350 adds a 4K header sector to the UF2, meaning we have 4K less total
flash to work with. Adjust all constants appropriately on the RP2350.
* Adds ilabs board and PSRAM support. (#2342)
* Adds iLabs boards and basic PSRAM support.
* Make PSRAM come up as part of chip init
Uses SparkFun psram.cpp to set timings on clocks which are defined in the
variant file. Prefix things with RP2350_PSRAM_xxx for sanity.
Users don't need to call anything, PSRAM "just appears". Still need to
add in malloc-type allocation.
* Add board SparkFun ProMicro RP2350
Same pinout as the SparkFun ProMicro RP2040 with 8MB PSRAM and RP2350
* Add TLSF library for use w/PSRAM
Fork of upstream to include add'l C++ warning fixes.
* Add pmalloc/pcalloc to use PSRAM memory
free() and realloc() all look at the pointer passed in and jump to the
appropriate handler. Also takes care of stopping IRQs and taking the
malloc mutex to support multicore and FreeRTOS (when that workd)
* Fix BOOTSEL for RP2350
* Add simple rp2040.idleOtherCore test
* Add Generic RP2350 and clean up PSRAM menus
Commercial boards now only have 1 size PSRAM, no need to have menu for them.
* Add Solder Party RP2350 Stamp boards (#2352)
* Add PSRAM heap info helpers, mutex lock mallinfo
* Add RP2350 docs
* FreeRTOS and OTA unsupported warnings for RP2350
* Update to 2.0.0 SDK
* Board type needs to be set before earliest SDK setup
* Platform includes update
* Boot2 files
* Simple compilation issues
* Build and link
* PIO rebuild with version
* Newlib wrapper update
* Force inclusion of runtime_init_* fcns
The linker was dropping all references to the library's included
runtime_init_xxx functions and hence things like the IRQ vector
table and mutexes and alarms weren't properly set up leading to
instant crashes on start up..
Explicitly call out one function from the object file stored in
the .A to force the inclusion of all the functions. May be a better
way, heppy to hear any ideas.
* Fix SPI GPIO calls
* Fix Ethernet GPIO
* Remove SDK warnings
Remove the skipped error messages once the following PR merged:
https://github.com/raspberrypi/pico-sdk/pull/1786
* BTStack moved SBC encode/decode paths
* Platform.IO fixes
* BT No longer has special absolute mouse
* Rebuild and update OTA
* Rebuild BearSSL, too
* Update liker file to latest SDK
* Clean up libpicocmake
* Clean up LWIP/BT library names
The repo and development use only '\n' (UNIX) EOLs. When a user runs
makeboards on a Windows system they end up changing every line in boards.txt
and the JSON files to Windows '\r\n' format.
Explicitly set the newline character when opening the output files to
avoid this.
* Add a build of all variants to CI using P.IO
* Split out into separate job, use BOOTSEL sketch
* Fix Breadstick variant
* Fix Bridgetech boards with illegal define names
Dash(-) to underscore(_) in define and variant for the -7 and -43.
* Bridgetech JSON updates
* Temporarily remove Bridgetech boards from CI
Needs an update to the P.IO external repo to work since the names
of the boards have changed.
An oversight in the order of updating the ASFLAGS with a copy of the CCFLAGS (see line 110) and then updating the CCFLAGS (without resyncing the ASFLAGS) leads to a fatal compilation error in the Adafruit PicoDVI library, in which `tmds_encode.S` fails to find the `pico/config.h` include file. This fix updates the ASFLAGS manually after changing the CCFLAGS so that they're equal again, and the library can be compiled.
Add a "-32K" option to all the IP stack options that doubles the PCB and memory
pools from default. For most use cases this is not necessary, but it could be
helpful in cases where large numbers of TCP clients are connected or high
bandwidth applications.
Fixes#2050
Adds a library to run classic Bluetooth A2DP source (output) audio from
the PicoW. Simple example showing operation and callbacks.
Factor out multiple BT lock/unlock and place in the PicoW variant files.
Use -O2 only on the LWIP checksum routine, resulting in a speedup of
around 13% (checksumming only, not entire LWIP stack) for 72 add'l bytes
of flash.
If a file called `.ci.defines` is present in a directory, apply those
while building the specified sketch.
* Add an lwip_ESPHost test, like the wired Ethernet ones
* Add WINC1500 test and CI hook
* Remove 1 minor warning in WINC build
