* Update to 2.0.0 SDK
* Board type needs to be set before earliest SDK setup
* Platform includes update
* Boot2 files
* Simple compilation issues
* Build and link
* PIO rebuild with version
* Newlib wrapper update
* Force inclusion of runtime_init_* fcns
The linker was dropping all references to the library's included
runtime_init_xxx functions and hence things like the IRQ vector
table and mutexes and alarms weren't properly set up leading to
instant crashes on start up..
Explicitly call out one function from the object file stored in
the .A to force the inclusion of all the functions. May be a better
way, heppy to hear any ideas.
* Fix SPI GPIO calls
* Fix Ethernet GPIO
* Remove SDK warnings
Remove the skipped error messages once the following PR merged:
https://github.com/raspberrypi/pico-sdk/pull/1786
* BTStack moved SBC encode/decode paths
* Platform.IO fixes
* BT No longer has special absolute mouse
* Rebuild and update OTA
* Rebuild BearSSL, too
* Update liker file to latest SDK
* Clean up libpicocmake
* Clean up LWIP/BT library names
The PIO and state machine were hard wired, so this caused problems if they were not free. The approach used by the Servo library has been adopted so a free PIO and SM are searched.
The DMA_IRQ_0 was grabbed exclusively, but this conflicts with SPI DMA use. The interrupt is now shared, but has been allocated the highest possible priority.
Since the PDM PIO use is receive only, the PIO state machine RX FIFO's can be joined to reduce DMA interrupt load.
Dan Ellis