Stop the IDE from reporting large "Serial port not fount"-type errors after
every upload by delaying a bit before the uploader exits to give the OS/Pico
time to renegotiate.
Fixes flashing problems on certain Linux distros by checking all possible mount
locations instead of only the first one to be found.
Make 1200bps reset tickle more robust
Co-authored-by: Earle F. Philhower, III <earlephilhower@yahoo.com>
The USB VID was always being set to the Raspberry Pi foundation code,
causing other brand boards to show up incorrectly.
Remove redundant values from the boards.txt and define a consistent
USB VID/PID and use it in the setup code.
See #1129 for more info
Fixes#1140
````
Converting to uf2, output size: 134144, start address: 0x2000
ERROR: Unable to execute powershell or wmic commands, can't continue.
ERROR: Please make sure either PowerShell or WMIC is installed and in
your %PATH%.
````
Instead of listing each board three times (normal upload, picoprobe,
and pico-debug uploads), list each board once and use a menu to select
the actual upload method.
Also add in picotool as an upload method for those folks who have trouble
with automounting.
Fix#1111
SingleFileDisk allows for exporting a file from the onboard LittleFS
filesystem to a PC through an emulated FAT drive when connected. The
PC can open and copy the file, as well as delete it, but the PC has no
access to the main onboard LittleFS and no actual on-flash FAT
structures are used.
This is handy for things like data loggers. They can run connected to
USB power for some time, and then connected to a PC to dowmload the CSV
log recorded.
It's almost 2023, allow LFN (long file names) on the emulated USB disk.
Reduce the disk buffer size to 64 bytes. The buffer is statically
allocated so it's always present, even in non-USB disk mode, meaning
all apps will pay the RAM price for it. 64 bytes is slower to read
but works and saves ~1/2KB of heap for all apps.
When receiving a `QUIT` message, the main thread was trying to tell
the scanner thread to quit - however, what it was actually doing was
creating a local variable that shadowed the global flag used by the
scanner thread. Fix that by ensuring that the main thread uses the
global variable instead.
Fixes#1028
* add rough for scorpio
* Add SCORPIO items from ladyada
* Change PID in makeboards.py instead of boards.txt
* Fix PID in scorpio JSON
* README: Add Feather SCORPIO to supported boards
* Fix PIDs using values from MBAdafruitBoards
Still unsure about pid.[1-7] but let's see what happens
* boards.txt fixed by running makeboards.py
Co-authored-by: lady ada <limor@ladyada.net>
A new flexible and powerful "pluggable discovery" system was added to the Arduino boards platform framework. This system
makes it easy for Arduino boards platform authors to use any arbitrary communication channel between the board and
development tools.
Boards platform configurations that use the old property syntax are automatically translated to the new syntax by
Arduino CLI:
https://arduino.github.io/arduino-cli/latest/platform-specification/#sketch-upload-configuration
> For backward compatibility with IDE 1.8.15 and older the previous syntax is still supported
This translation is only done in platforms that use the old syntax exclusively. If `pluggable_discovery` properties are
defined for the platform then the new pluggable discovery-style `upload.tool.<protocol_name>` properties must be defined
for each board as well.
This platform includes a "UF2 Devices" discovery tool for `uf2conv` protocol ports. This tool now uses the modern
Arduino pluggable discovery system. `pluggable_discovery` properties were added to `platform.txt` in order to configure
the Arduino development tools to use this pluggable discovery tool. The `upload.tool.<protocol_name>` properties in
`boards.txt` were not updated at that time.
Global properties of that name were added to platform.txt, but this approach is not provided for by the Arduino Platform
specification:
https://arduino.github.io/arduino-cli/latest/platform-specification/#sketch-upload-configuration
> A specific upload.tool.<protocol_name> property should be defined for every board in boards.txt:
Those missing properties caused uploads to fail for users of the recent versions of Arduino IDE and Arduino CLI with an
error of the form:
Error during Upload: Property 'upload.tool.<protocol_name>' is undefined
(where `<protocol_name>` is the protocol of the selected port, if any)
It is also important to provide compatibility with versions of Arduino development tools from before the introduction of
the modern pluggable discovery system. For this reason, the old style `<board ID>.upload.tool` properties are retained.
Old versions of the development tools will treat the `<board ID>.upload.tool.<protocol_name>` properties as an unused
arbitrary user defined property with no special significance and the new versions of the development tools will do the
same for the `upload.tool` properties.
Random crashes, infinite loops, and other lockups were happening to the PicoW
while under high load from multiple clients.
This seems to have been due to two issues:
* The periodic sys_check_timeouts() call from an alarm/IRQ was happening while
the core was in LWIP code. LWIP is not re-entrant or multi-core/thread safe
so this is a bad thing. Some calls may not have been locked with a manual
addition of the LWIPMutex object to hit this.
* The WiFi driver supplies packet data during an interrupt. PBUF work is
legal in an interrupt, but actually calling netif->input() from an IRQ to
queue up the Ethernet packet for processing is illegal if LWIP is already
in progress.
Rearchitect the LWIP interface to fix these problems:
* Disable interrupts during malloc/etc. to avoid the possibility of the
periodic LWIP timeout check interrupting and potentially calling user
code which did a memory operation
* Wrap all used LWIP calls to note LWIP code will be executing, instead of
manually eyeballing and adding in protection in user code.
* Remove all user code LWIPMutex blocking, the wrapping takes care of it.
* When an Ethernet packet is received by interrupt and we're in LWIP code,
just throw the packet away for now. The upper layers can handle retransmit.
(A possible optimization would be to set the packet aside and add a
housekeeping portion to the LWIP wrappers to netif->input() them when safe).
* Ignore callbacks during TCP connection teardown when the ClientContext
passed from LWIP == nullptr
Allow the IDE to detect UF2 volumes (i.e. when you hold BOOTDEL and
plug in the board).
Allows the IDE2 to properly upload using OTA and serial.
Fixes#890 and others
Because OTA has changed the flash map from standard, picotool ends up
crashing or hanging while trying to operate on the current built files.
Remove the binary_info calls and structures completely to avoid any
issue.
Fixes#803
* Add HTTP-parser lib to support ESP32 WebServer
* Add WebServer from ESP32. Only supports HTTP
* Separate HTTP server from the network server
Instead of managing the WiFiServer/WiFiServerSecure in the same object
as the HTTP handling, split them into separate objects. This lets
HTTP and HTTPS servers work without templates or duplicating code.
The HTTP block just gets a `WiFiClient*` and works with that to only
do HTTP processing, while the upper object handles the appropriate
server and client types.
* Add HTTPS server
* Clean up some THandlerFunction refs
* Refactor into a template-ized WebServer/WebServerSecure
* Add DNSServer examples which need WebServer
* Fix CoreMutex infinite recursion crash
Core could crash while Serial debugging was going on and prints were
happening from LWIP/IRQ land and the main app.
* Add HTTPUpdateServer(Secure)
* Add MIME include, optimize WebServer::send(size,len)
When send()ing a large buffer, the WebServer::send() call would
actually convert that buffer into a String (i.e. duplicate it, and
potential issues with embedded \0s in binary data).
Make a simple override to send(size, len) to allow writing from the
source buffer instead.
* Fix WiFiClient::send(Stream), add FSBrowser example
* Add HTTPUpdate class to pull updates from HTTP(S)
* Increase GH runners for pulls
WiFi builds and examples are taking some serious time now
* HTTPUpdate tests build on Pico W
Remove the need to have a separate WiFiClient that's destroyed after
the HTTPClient. Let the object handle its own client, and pass through
any SSL requests.
Also supports the original ::begin methods which need a
WiFiClient(Secure) to be passed in and managed by the app.
Adds a 12K OTA stub 3rd stage bootloader, which reads new firmware
from the LittleFS filesystem and flashes on reboot.
By storing the OTA commands in a file in flash, it is possible to
recover from a power failure during OTA programming. On power
resume, the OTA block will simply re-program from the beginning.
Support cryptographic signed OTA updates, if desired. Includes
host-side signing logic via openssl.
Add PicoOTA library which encapsulates the file format for
the updater, including CRC32 checking.
Add LEAmDNS support to allow Arduino IDE discovery
Add ArduinoOTA class for IDE uploads
Add MD5Builder class
Add Updater class which supports writing and validating
cryptographically signed binaries from any source (http,
Ethernet, WiFi, Serial, etc.)
Add documentation and readmes.
* Apply @oddstr13 multicast patch to cyw43 driver
* Initial work for enabling IPv6
* Allow accessing CYW43 stats when LWIP_SYS_CHECK_MS is not set
* Use cyw43_set_allmulti to allow receiving multicast
* Add tools/libpico/build to gitignore
Co-authored-by: Odd Stråbø <oddstr13@openshell.no>
The send buffers are set to 8 * MSS = ~11.5K. MEM_SIZE is now set to
be larger than that, 16K, in order to help avoid having tcp_write fail
with ENOMEM. The attempt to use a smaller size is still included, which
will allow a tcp_write of up to 16 * 16K = 256K, i.e. all of memory.
Fixes#725
Increases the MEM_SIZE outstanding write buffer to 8K
Allows the ClientContext to attempt to send smaller buffer chunks in the
case where MEM_SIZE won't allow the full tcp_sndbuf() transfer.
Fixes#725
* Adds support for Challenger RP2040 WiFi boards
* Added Challenger board to makeboards build script
* Adds new challenger board with LTE modem.
* Updated after getting approved PID from Raspberry Pi
* Add support for reverse numbering of analog pins.
* Added minimal HW support for onboard WiFi modem.
* Added challenger-nb-rp2040-wifi and RPICO32 module.
* Updated PID for RPICO32
* Added a simple support class for challenger LTE boards
* Update ChallengerLTE.cpp
Fixed spelling error
* Adds option for setting USB max power in makeboards.py
* Added new board Challenger RP2040 LoRa
* Added new lora board to readme.
* Added missing SERIAL2 and LoRa module GIO pins.
* Added support for enabling UART CTS and RTS pins.
* Updated boards.txt after merge conflict of makeboards.py
* Fixed incorrect indention
* Fixed PR comments
* Add new Challenger RP2040 WiFi/BLE board (https://ilabs.se/challenger-rp2040-wifi-ble-datasheet)
* * Updated PID for WiFi/BLE board
* Added abstraction pins for both versions of wifi modules
* Added support for replacing support class serial port.
* Added support for retrieving support class serial port.
* Fixed spelling errors.
* Updated helper class for Challenger NB board.
* Added Challenger sdrtc and subghz boards.
* Updated readme.
* Re ran makeboards to generate new index.
* Added to possibility to have extra compiler directives for a board.
* Added extra compiler options to JSON generation.
* Allows having a list of extra macros to define
* Fixed incorrect USB PID for Challenger NB board.
* Added board initialization for all wifi boards.
Co-authored-by: Earle F. Philhower, III <earlephilhower@yahoo.com>
