Max/djhackersdev_bemanitools
1
0
Fork 0
Code Issues 72 Pull Requests 15 Actions Packages Projects Releases 20 Wiki Activity

chore: Apply formatting to all markdown docs

Browse Source
This commit was merged in pull request #279.
This commit is contained in:
icex2
2024-01-31 22:20:51 +01:00
committed by icex2
parent 0897a25174
commit 0a29e031ff
75 changed files with 3200 additions and 2786 deletions
Download Patch File Download Diff File Expand all files Collapse all files
doc/sdvxhook/sdvxio-bio2.md
+17 -11
View File
@@ -1,18 +1,24 @@
This library talks to a BIO2 BI2A node and implements the sdvxio API of BT5.
Thus, it allows you to use a BIO2 SDVX device board with *any* version of SDVX that is supported by BT5.
This library talks to a BIO2 BI2A node and implements the sdvxio API of BT5. Thus, it allows you to
use a BIO2 SDVX device board with *any* version of SDVX that is supported by BT5.
# Setup
* Make sure that your BIO2 is flashed with a SDVX firmware (if you can boot SDVX5 with it, it's already the right firmware)
* The firmware persists between boots, so as long as it's flashed to the correct firmware, you no longer need to do this step
* Rename sdvxio-kfca.dll to sdvxio.dll.
* Ensure that your gamestart.bat actually injects the appropriate sdvxhook dll
for example:
- Make sure that your BIO2 is flashed with a SDVX firmware (if you can boot SDVX5 with it, it's
already the right firmware)
- The firmware persists between boots, so as long as it's flashed to the correct firmware, you no
longer need to do this step
- Rename sdvxio-kfca.dll to sdvxio.dll.
- Ensure that your gamestart.bat actually injects the appropriate sdvxhook dll for example:
```
launcher -K sdvxhook.dll soundvoltex.dll ...*
```
or that the application otherwise uses sdvxio.dll
* sdvxio-bio2 implements BIO2 device autodetection
* if this fails please make a bug report, and set the port manually in the config
* You can change the port and baudrate by editing the sdvxio-bio2.conf that should be created by default
* Please connect any additional acio devices to their own port (ex: SDVX5 expects an ICCA by itself on COM2)
- sdvxio-bio2 implements BIO2 device autodetection
- if this fails please make a bug report, and set the port manually in the config
- You can change the port and baudrate by editing the sdvxio-bio2.conf that should be created by
default
- Please connect any additional acio devices to their own port (ex: SDVX5 expects an ICCA by itself
on COM2)
doc/sdvxhook/sdvxio-kfca.md
+14 -9
View File
@@ -1,16 +1,21 @@
This library talks to a KFCA node through ACIO and implements the sdvxio API of BT5.
Thus, it allows you to use a KFCA device board with *any* version of SDVX that is supported by BT5.
This library talks to a KFCA node through ACIO and implements the sdvxio API of BT5. Thus, it allows
you to use a KFCA device board with *any* version of SDVX that is supported by BT5.
# Setup
* Rename sdvxio-kfca.dll to sdvxio.dll.
* Ensure that your gamestart.bat actually injects the appropriate sdvxhook dll
for example:
- Rename sdvxio-kfca.dll to sdvxio.dll.
- Ensure that your gamestart.bat actually injects the appropriate sdvxhook dll for example:
```
launcher -K sdvxhook2.dll soundvoltex.dll ...*
```
or that the application otherwise uses sdvxio.dll
* sdvxio-kfca expects a KFCA device on COM3 by default
* You can change the port and baudrate by editing the sdvxio-kfca.conf that should be created by default
* If there is also an ICCA device on the same ACIO bus, it cannot be used with eamio-icca at this time
* Please connect any additional acio devices to their own port (ex: SDVX5 expects an ICCA by itself on COM2)
- sdvxio-kfca expects a KFCA device on COM3 by default
- You can change the port and baudrate by editing the sdvxio-kfca.conf that should be created by
default
- If there is also an ICCA device on the same ACIO bus, it cannot be used with eamio-icca at this
time
- Please connect any additional acio devices to their own port (ex: SDVX5 expects an ICCA by itself
on COM2)