Fix prettier format

docs/en/config/inbound.md

@@ -109,7 +109,6 @@ Whether to enable traffic sniffing.
 
 When the traffic is of a specified type, reset the destination of the current connection to the target address included in the list.
 
-
 > `metadataOnly`: true | false
 
 When enabled, only use the connection's metadata to sniff the target address. In this case, sniffer other than `fakedns` cannot be activated.

docs/en/config/outbounds/freedom.md

@@ -36,8 +36,8 @@ Freedom is an outbound protocol that can be used to send (normal) TCP or UDP dat
 ```
 
 > `domainStrategy`: "AsIs"
-"UseIP" | "UseIPv6v4" | "UseIPv6" | "UseIPv4v6" | "UseIPv4"
-"ForceIP" | "ForceIPv6v4" | "ForceIPv6" | "ForceIPv4v6" | "ForceIPv4"
+> "UseIP" | "UseIPv6v4" | "UseIPv6" | "UseIPv4v6" | "UseIPv4"
+> "ForceIP" | "ForceIPv6v4" | "ForceIPv6" | "ForceIPv4v6" | "ForceIPv4"
 
 When the destination address is a domain name, configure the corresponding value for Freedom's behavior:
 

docs/en/config/transport.md

@@ -26,7 +26,7 @@ Transports specify how to achieve stable data transmission. Both ends of a conne
     "tcpFastOpen": false,
     "tproxy": "off",
     "domainStrategy": "AsIs",
-    "happyEyeballs": {"tryDelayMs": 250},
+    "happyEyeballs": { "tryDelayMs": 250 },
     "dialerProxy": "",
     "acceptProxyProtocol": false,
     "tcpKeepAliveInterval": 0,
@@ -470,7 +470,7 @@ A string array representing the key content, in the format shown in the example.
   "tcpFastOpen": false,
   "tproxy": "off",
   "domainStrategy": "AsIs",
-  "happyEyeballs": {"tryDelayMs": 250},
+  "happyEyeballs": { "tryDelayMs": 250 },
   "dialerProxy": "",
   "acceptProxyProtocol": false,
   "tcpKeepAliveInterval": 0,
@@ -520,8 +520,8 @@ When `followRedirect` is set to `true` in [Dokodemo-door](./inbounds/dokodemo.md
 :::
 
 > `domainStrategy`: "AsIs"
-"UseIP" | "UseIPv6v4" | "UseIPv6" | "UseIPv4v6" | "UseIPv4"
-"ForceIP" | "ForceIPv6v4" | "ForceIPv6" | "ForceIPv4v6" | "ForceIPv4"
+> "UseIP" | "UseIPv6v4" | "UseIPv6" | "UseIPv4v6" | "UseIPv4"
+> "ForceIP" | "ForceIPv6v4" | "ForceIPv6" | "ForceIPv4v6" | "ForceIPv4"
 
 In previous versions, when Xray attempted to establish a system connection using a domain name, the resolution of the domain name was completed by the system and not controlled by Xray. This led to issues such as the inability to resolve domain names in non-standard Linux environments. To solve this problem, Xray 1.3.1 introduced Freedom's `domainStrategy` into Sockopt.
 
@@ -659,7 +659,6 @@ The option value to be set, the example here is set to bbr.
 
 Decimal numbers are required when type is specified as int.
 
-
 > `happyEyeballs`: {}
 
 only TCP, this is RFC-8305 implementation of happyEyeballs, only apply when built-in-dns is used(domainStrategy is `UseIP`/`ForceIP`).
@@ -687,16 +686,16 @@ delay time between each attempt in millisecond, RFC-8305 recommend `250`, defaul
 
 > `prioritizeIPv6`: bool
 
- indicate "First Address Family" in RFC-8305, default is false(= prioritizeIPv4)
+indicate "First Address Family" in RFC-8305, default is false(= prioritizeIPv4)
 
 > `interleave`: number
 
- indicate "First Address Family count" in RFC-8305, default is 1.
- 
+indicate "First Address Family count" in RFC-8305, default is 1.
+
 for example suppose our IP-list is [ip4-1, ip4-2, ip4-3, ip4-4, ip6-1, ip6-2, ip6-3, ip6-4]
-when interleave  is 1 and prioritizeIPv6 is false, the sorted-ip-list is:
+when interleave is 1 and prioritizeIPv6 is false, the sorted-ip-list is:
 [ip4-1, ip6-1, ip4-2, ip6-2, ip4-3, ip6-3, ip4-4, ip6-4]
-and when for example interleave is 2 and prioritizeIPv6  is true:
+and when for example interleave is 2 and prioritizeIPv6 is true:
 [ip6-1, ip6-2, ip4-1, ip4-2, ip6-3, ip6-4, ip4-3, ip4-4]
 
 > `maxConcurrentTry`: number

docs/en/document/install.md

@@ -90,6 +90,7 @@ Currently two different styles of Docker images are provided:
 ### Docker Image File Structure
 
 teddysun/xray image:
+
 - `/usr/bin/xray`: Xray-core executable
 - `/etc/xray/config.json`: Single configuration file (its directory is the mount point)
 - `/usr/share/xray/`: Resource directory containing v2fly geodata files
@@ -97,6 +98,7 @@ teddysun/xray image:
   - geosite.dat
 
 ghcr.io/xtls/xray-core image:
+
 - `/usr/local/bin/xray`: Xray-core executable (owner: root:root, permissions: 755)
 - `/usr/local/etc/xray/`: Configuration directory (mount point). Owner: root:root, directory permissions: 755, file permissions: 644
   - 00_log.json