As someone running several games on the same cabinet that share most of the hardware (like KCA and FGO), it's a bit of a hassle switching the COM ports of the hardware around all the time.
This commit adds the ability to place arbitary path redirections in segatools.ini, which is mostly useful for hardcoded serial ports.
Technically this would also allow you to redirect arbitary paths, but I haven't tested that yet.
An example that I personally use is:
```
[vfs]
amfs=amfs
appdata=.
option=option
; aime reader
redirection0from=\\.\COM10
redirection0to=\\.\COM3
; rfid reader
redirection1from=\\.\COM12
redirection1to=\\.\COM2
; POP led begone
redirection2from=\\.\COM9
redirection2to=\\.\COM90
; partition to pop
redirection3from=\\.\COM11
redirection3to=\\.\COM9
```
Reviewed-on: https://gitea.tendokyu.moe/TeamTofuShop/segatools/pulls/62
Co-authored-by: kyoubate-haruka <46010460+kyoubate-haruka@users.noreply.github.com>
Co-committed-by: kyoubate-haruka <46010460+kyoubate-haruka@users.noreply.github.com>
(Yeah, I know the OS may cache disk reads, but that wasn't the concern)
The ALLS series of cabs runs EWF to prevent anything from being written to C:\.
This PR adds another layer to iohook to redirect specific open/read/write/close operations to a virtual file table to prevent disk activity, and thus simulate the presence of EWF. This was mainly aimed at ALPB's billing files. Seriously, look at this - especially the timestamps, Sega wtf are you doing.
This does not affect other path hooks. It's turned off by default and will throw an error if the current executable resides on C:\.
Tested with FGO and APMv3.
![22bf755754[1].png](/attachments/31771aee-2e4d-4e4f-85e3-c5eec63c6f78)
Reviewed-on: https://gitea.tendokyu.moe/TeamTofuShop/segatools/pulls/84
Co-authored-by: kyoubate-haruka <46010460+kyoubate-haruka@users.noreply.github.com>
Co-committed-by: kyoubate-haruka <46010460+kyoubate-haruka@users.noreply.github.com>
This PR adds everything that's needed on the segatools side to add E-Money support regarding Thinca authentication cards.
I've also included set-up documentation (with a network side bonus which was as far as I could figure out so far, but I'm pretty certain no more changes to segatools will be needed)
Due to the nature of a custom protcol called TCAP that Thinca uses for networking (see docs), I can't fully test that everything works as I haven't yet bothered to figure that protocol out.
Tested with both APMv3 and FGO.
Reviewed-on: https://gitea.tendokyu.moe/TeamTofuShop/segatools/pulls/35
Co-authored-by: Haruka <haruka@noreply.gitea.tendokyu.moe>
Co-committed-by: Haruka <haruka@noreply.gitea.tendokyu.moe>
In this PR, I have added the `mai2` touch and `led15070` hooks to provide an example for handling custom peripherals. This change allows users to implement the touch and `led15070` logic by writing appropriate `mai2io` scripts.
#### **Touch Hook**:
- The touch hook simulates touch points based on keyboard combinations. For example, to trigger the A1 touch point, the user must press the A and 1 keys on the keyboard. Input for the 1p requires Caps Lock to be off, while 2p requires Caps Lock to be on.
- The hook allows for independent control of whether device simulation is enabled for "1p" and "2p" and whether keyboard input mapping is enabled.
- **Note**: The current touch hook is not yet functional as it requires modifications to the `capnhook` for proper completion of the `sinmai` hook.
#### **LED15070 Hook**:
- This hook implements basic device simulation. Peripherals requiring lighting data should complete the logic as needed.
- **Note**: The LED data refresh can flood the console logs, so I’ve added a `DEBUG` flag to control whether the debug logging is enabled or not.
#### **Other Changes**:
- In certain versions of `sinmai`, key inputs for 1p and 2p can be directly read from the keyboard without requiring simulation via the `amdaemon io4` hook. I’ve added a switch to control this behavior to prevent redundant input.
- **Benefit**: This ensures that key input is only read when `sinmai` is in the foreground.
If you'd like to learn more about the touch and `led15070` features, my research findings are available here:
[Mai2Touch](https://github.com/Sucareto/Mai2Touch)
Co-authored-by: Sucareto <28331534+Sucareto@users.noreply.github.com>
Reviewed-on: https://gitea.tendokyu.moe/TeamTofuShop/segatools/pulls/55
Co-authored-by: Mahuyo <mahuyo@noreply.gitea.tendokyu.moe>
Co-committed-by: Mahuyo <mahuyo@noreply.gitea.tendokyu.moe>
kyoubate-haruka
