diff --git a/andamiro/board.md b/andamiro/board.md
index 9bbd073..12ef18e 100644
--- a/andamiro/board.md
+++ b/andamiro/board.md
@@ -183,6 +183,8 @@ PC-DOCTOR DOS 3.0 Copyr 2004 PC-Doctor, Inc. 16:15 9/25/2000
 These are usually referred to as "MK9" or "MK10/MKX" depending on when released. However, these were never referred to
 as specific MK versions nor revisions by Andamiro. Compatbility with different software versions might vary.
 
+### 945
+
 * Motherboard: Gigabyte GA-945GCM-S2L
 * GPU: GeForce 7200GS
 * IO: [USBPIUIO](io.md#usbpioio)
@@ -190,7 +192,17 @@ as specific MK versions nor revisions by Andamiro. Compatbility with different s
 * Anything before [NX2](game/piu/nx2.md) 1.54 doesn't work with this revision
 * Shipped with upgrades and when buying a [FX cabinet](cabinet.md#fx) at that time
 
----
+### G31
+
+* Motherboard: Gigabyte G31M
+* GPU: Nvidia GeForce 8400GS
+* IO: [USBPIUIO](io.md#usbpioio)
+* Bundled with Fiesta when buying a [TX cabinet](cabinet.md#tx) at that time
+* GPU last compatible card with [Fiesta](game/piu/fst.md)/[FiestaEX](game/piu/fstex.md)
+
+### G41
+
+#### Asrock G41
 
 * Motherboard: Asrock G41M-S3
 * GPU: GeForce 9300GS
@@ -199,15 +211,7 @@ as specific MK versions nor revisions by Andamiro. Compatbility with different s
 * IO: [USBPIUIO](io.md#usbpioio)
 * Hardware shipped with [Pump it Up Jump cabinets](cabinet.md#jump)
 
----
-
-* Motherboard: Gigabyte G31M
-* GPU: Nvidia GeForce 8400GS
-* IO: [USBPIUIO](io.md#usbpioio)
-* Bundled with Fiesta when buying a [TX cabinet](cabinet.md#tx) at that time
-* GPU last compatible card with [Fiesta](game/piu/fst.md)/[FiestaEX](game/piu/fstex.md)
-
----
+#### Gigabyte G41
 
 * Motherboard: Gigabyte G41M
 * GPU: Nvidia GeForce GT210
@@ -215,14 +219,13 @@ as specific MK versions nor revisions by Andamiro. Compatbility with different s
 * Bundled with [Fiesta 2](game/piu/f2.md) when buying a [CX cabinet](cabinet.md#cx) at that time
 * GPU last compatible card with Fiesta 2 OS
 
----
+### H81
 
-* Chipset: G41
+* Motherboard: Asrock H81M-DGS REV2.01
+* CPU: Intel Celeron G1840/2.8GHz
+* GPU: Nvidia GeFroce GT710 1GB 64bit DD3
+* IO: [LXIO](io.md#lxio) and [USBPIUIO](io.md#usbpiuio) with breakout cables for LXIO "hanging out"
+* RAM: 2 GB
+* Bundled with Pump It Up [XX](game/piu/xx.md) upgrade kit
 
----
-
-* Chipset: H81
-
----
-
-* Chipset: H310
+### H310
diff --git a/andamiro/cabinet.md b/andamiro/cabinet.md
index 819a30c..1dd3852 100644
--- a/andamiro/cabinet.md
+++ b/andamiro/cabinet.md
@@ -7,12 +7,29 @@
 * First generation cabinets released with [1st](game/piu/1st.md) and [2nd](game/piu/2nd.md)
   (2nd was releasedshortly after 1st already)
 * Similar look to original DDR cabinets
-* Monitor: [CRT](monitor.md#crt)
+* Monitor: 29" [CRT](monitor.md#crt)
 * Main PCB
   * [MK1](board.md#mk1)
   * [MK3](board.md#mk3)
-* First game version to ship in this cabinet type
+* Games initially shipped with this cabinet type
   * [1st](game/piu/1st.md)
+  * [2nd](game/piu/2nd.md)
+
+### DX
+
+* Deluxe version cabinet with a 51" rear projection monitor
+* Monitor: 51" [APT51](monitor.md#apt51)
+* Main PCB
+  * [MK1](board.md#mk1)
+  * [MK3](board.md#mk3)
+* Games initially shipped with this cabinet type
+  * [The O.B.G](game/piu/3rd.md)
+  * [The O.B.G SE](game/piu/3se.md)
+  * [The Collection](game/piu/tc.md)
+  * [The Perfect Collection](game/piu/pc.md)
+  * [Extra](game/piu/extra.md)
+  * [The Premiere](game/piu/prem1.md)]
+  * [The Rebirth](game/piu/reb.md)
 
 ### SX
 
@@ -20,25 +37,18 @@
 * Most notable cabinet design differences
   * Single subwoofer centered on cabinet main body
   * Two coin doors, left and right of the subwoofer
-* Monitor: [CRT](monitor.md#crt)
+* Monitor: 29" [CRT](monitor.md#crt)
 * Main PCB: [MK3](board.md#mk3)
-* First game versions to ship in this cabinet type
-  * [Premiere 1](game/piu/prem1.md)
+* Games initially shipped with this cabinet type
   * [Prex 1](game/piu/prex1.md)
-
-### DX
-
-* Deluxe version cabinet
-* Monitor: [APT51](monitor.md#apt51)
-* Main PCB
-  * [MK1](board.md#mk1)
-  * [MK3](board.md#mk3)
+  * [The Premiere 2](game/piu/prem2.md)
 
 ### GX
 
-* Monitor: [GX CRT curved](monitor.md#gx-crt-curved)
+* Monitor: 33" [GX CRT curved](monitor.md#gx-crt-curved)
 * Main PCB: [MK6 Rev1](board.md#mk6-rev1)
 * Games initially shipped with this cabinet type
+  * [Prex 2](game/piu/prex3.md)
   * [Prex 3](game/piu/prex3.md)
   * [Prem 3](game/piu/prem3.md)
   * [Exceed](game/piu/exc.md)
@@ -46,7 +56,7 @@
 
 ### GX V2
 
-* Monitor (flat tube): [KT-3414DF](monitor.md#kt-3414df)
+* Monitor (flat tube): 33" [KT-3414DF](monitor.md#kt-3414df)
 * Main PCB: [MK6 Rev2](board.md#mk6-rev2)
 * Games initially shipped with this cabinet type
   * [Zero](game/piu/zero.md)
@@ -57,13 +67,14 @@
 * Official
 * Small bar-top style cabinet with push buttons to play the game with your hands
 * Games initially shipped with this cabinet type
+  * [Extra](game/piu/extra.md)
   * [Exceed](game/piu/exc.md)
   * [Exceed 2](game/piu/exc2.md)
   * [NX](game/piu/nx.md)
 
 ### FX
 
-* Monitor: [PDP TV](monitor.md#pdp-tv-monitor)
+* Monitor: 42" [PDP TV](monitor.md#pdp-tv-monitor)
 * Main PCB: [MK6 Rev2](board.md#mk6-rev2)
 * Games initially shipped with this cabinet type
   * [NX](game/piu/nx.md)
@@ -74,8 +85,8 @@
   * All cabinets lights use LEDs
   * New revision of dance platforms with bars mounted to the platform base instead of just put on
     bolts
-* Monitor: [PDP TV](monitor.md#pdp-tv-monitor)
-* Main PCB: [MK9 Rev1](board.md#mk9-rev1)
+* Monitor: 42" [PDP TV](monitor.md#pdp-tv-monitor)
+* Main PCB: [945](board.md#945)
 * Games initially shipped with this cabinet type
   * [NX2](game/piu.nx2.md)
   * [NXA](game/piu/nxa.md)
@@ -84,14 +95,14 @@
 ### Jump
 
 * Cabinet specially made for the game [Pump It Up Jump!](game/piu/jump.md)
-* Main PCB: [MK9 Rev2](board.md#mk9-rev2)
+* Main PCB: [Asrock G41](board.md#asrock-g41)
 
 ### SX2
 
 * "Refreshed" version of the [SX](#sx) type cabinet. Though it resembles more the [GX V2](#gx-v2)
   cabinet with a smaller monitor
 * Monitor (flat tube): [KT-2914DF](monitor.md#kt-2914df)
-* Main PCB: [MK9 Rev1](board.md#mk9-rev1)
+* Main PCB: [945](board.md#945)
 * Games initially shipped with this cabinet type
   * [NX2](game/piu/nx2.md)
   * [NXA](game/piu/nxa.md)
@@ -100,9 +111,7 @@
 
 * Cabinet buttons ("PRO button board") built-in
 * Monitor: [CX monitor](monitor.md#cx-monitor)
-* Main PCB
-  * [MK9 Rev3](board.md#mk9-rev3)
-  * [MK9 Rev4](board.md#mk9-rev4)
+* Main PCB: [G41](board.md#gigabyte-g41)
 * Games initially shipped with this cabinet type
   * [Fiesta](game/piu/fst.md)
   * [FiestaEX](game/piu/fstex.md)
@@ -114,7 +123,7 @@
 
 * Cabinet buttons ("PRO button board") built-in
 * Monitor: [TX monitor](monitor.md#tx-monitor.md)
-* Main PCB: [MK9 Rev3](board.md#mk9-rev3), [MK9 Rev4](board.md#mk9-rev4)
+* Main PCB: [G31](board.md#g31)
 * Games initially shipped with this cabinet type
   * [Fiesta](game/piu/fst.md)
   * [FiestaEX](game/piu/fstex.md)
@@ -125,7 +134,7 @@
 ### LX
 
 * Monitor: [LX monitor](monitor.md#lx-monitor.md)
-* Main PCB: [MK9 Rev4](board.md#mk9-rev4), [MKX](board.md#mkx)
+* Main PCB: [H81](board.md#h81)
 * Games initially shipped with this cabinet type
   * [Prime 2](game/piu/prime2.md)
   * [XX](game/piu/xx.md)
diff --git a/andamiro/game/piu/exc.md b/andamiro/game/piu/exc.md
index 73a3544..cdbe5f1 100644
--- a/andamiro/game/piu/exc.md
+++ b/andamiro/game/piu/exc.md
@@ -1,5 +1,6 @@
 # Pump it Up Exceed: The International 5th Dance Floor
 
+* `20040728` Hand Cabinet with MicroDog (Technically Exceed2 OS)
 * `20040408`
 * `20040325`
 * `20040316`
diff --git a/andamiro/monitor.md b/andamiro/monitor.md
index 2f6aea1..020dbb4 100644
--- a/andamiro/monitor.md
+++ b/andamiro/monitor.md
@@ -19,6 +19,7 @@
 * Aspect ratio: 4:3
 * Native resolution: 640x480 (VGA)
 * Inputs: VGA
+* Further supported resolutions: 320x200 (CGA), EGA (640x350)
 
 ## GX CRT curved
 
diff --git a/igs/boards.md b/igs/boards.md
index 44c058a..3516aca 100644
--- a/igs/boards.md
+++ b/igs/boards.md
@@ -1,104 +1,131 @@
-## PolyGame Master (PGM)
 
-### PGM1
+# Proprietary
+## PolyGameMaster (PGM) `#MAME:pgm.cpp`
+**CPU**: Motorola 68HC000FN20 @ 20MHz (main); Zilog Z80 @ 8.468MHz (sound); IGS027A (customized ARM processor with internal ROM, coprocessor in some game cartridges)
 
-### PGM2
+**RAM**: Epson SRM2B256SLMX55 8K x8 SRAM (x4, SOP28); Unicorn Microelectronics UM6164DS-12 8K x8 SRAM (x2, SOJ28); Unicorn Microelectronics UM61256FS-15 32K x8 SRAM (x3, SOJ28)
 
-### PGM3
+**Graphics:** ASIC, IGS023/IGS026, 448x224, 15-bit color, 59.185606 Hz/15KHz
 
-# PC-based
+**Sound:** ICS WaveFront 2115 Wavetable midi synthesizer
 
-## E2xxx series
+**Storage:** ROM cartridges
 
-### E2000
-**CPU:** 
-**RAM:**  
-**MBD:** I-JOIN E2000-C6-V256
-**STH:** 
-**GPU:** 
-**SND:** 
-**OS:** Linux
-**Games:** Speed Rider, Rock Fever 5, We Dancing Online
+## PolyGameMaster 2 (PGM2) `#MAME:pgm2.cpp`
+**CPU**: IGS036, customized ARM9 @ 100MHz? (main); Renesas R5F21256SN microcontroller (IC card controller)
+
+**RAM**: IS61LV25616AL, 256Kx16 SRAM
+
+**Graphics**: ASIC, IGS037, 512x240, 59.8 Hz
+
+**Sound:** Yamaha YMZ774-S DSP @ 16.384Mhz
+
+**Storage**: ROM chips 
+
+**Extra:** IC card readers
+## PolyGameMaster 3 (PGM3)`#MAME:pgm3.cpp #WEB:https://www.arcadebelgium.net/t4958-knights-of-valour-3-hd-sangoku-senki-3-hd`
+Despite using Intel processors, PGM3 is not a PC/AT compatible system.
+
+**CPU:** Intel Atom D525 @ 1.80GHz ? / SOCLE SOC38, customized ARM1176 @ 800MHz?
+
+**RAM:** 2GB
+
+**Graphics:** ? 800x600 / 1280x720
+
+**Storage:** ROM cartridges (game); IC cards (player savedata)
+
+**Extra:** IC card readers
+## MA1000
+(There is little to no information about this board yet.)
+
+
+
+# PC-Based
+## E2000
+**Motherboard:** I-JOIN E2000-C6-V256
+
+**Storage:** CompactFlash cards
+
+**OS:** Linux, likely LFS
+
+## E2100
+**Motherboard:** Advantech DES-BT01
+
+**BIOS:** Customized Phoenix-AwardBIOS v6.00PG, version as DES-BT01 BIOS V1.10
 
-### E2100
 **CPU:** Intel Atom N270
-**RAM:**  1 GB DDR2-533
-**MBD:** Advantech DES-BT01
-**STH:** 
-**GPU:** 
-**SND:** 
-**OS:** Linux
-**BIOS:** Phoenix-AwardBIOS v6.00PG [**** DES-BT01 BIOS V1.10 (09/06/2010) ****, 09/01/2010-945GS-8A79YAK8C-00]
-**Variants:** DES-BT01 A102-1, DES-BT01 A101-4
-**Games:** Hero of Robots, Harpoon Lagoon, Fish Lagoon
 
-### E2200
-**CPU:** Intel Atom D525 (1.83GHz)
-**RAM:**  
-**MBD:** Advantech DAC-BT07
-**STH:** 
-**GPU:** 
-**SND:** 
-**Storage:** 4 GB CompactFlash
-**OS:** Linux
-**Variants:** KN-00 (DAC-BT07 A101-4), KN-01 (DAC-BT07 A102)
-**BIOS:** AMIBIOS 8 [E2200 BIOS V1.0.0 (20111207), 64-0100-009999-00101111-120711-Pineview-E22_V100-Y2KC]
-**Games:** Percussion Master 3
+**Storage:** CompactFlash cards
 
-## E3xxx series
+**OS:** Linux, likely LFS
+
+## E2200
+**Motherboard:** Advantech DAC-BT07
+
+**BIOS:** Customized AMI BIOS 8, version as E2200 BIOS V1.0.0 (20111207)
+
+**CPU:** Intel Atom D525 @ 1.83GHz
+
+**Storage:** CompactFlash cards
+
+**OS:** Linux, likely LFS
+
+## E3000
+**Motherboard:** Model number IGS LX MB E3000V, unknown manufacture
+
+**BIOS:** AMI BIOS 8, more similar to regular ones
 
-### E3000
 **CPU:** AMD Athlon II X2 250
-**RAM:** 2 x InnoDisk 1 GB DDR2-800 Low Profile DIMM (M2UK-1GHFMC06-E) [2 GB dual-channel]
-**MBD:** IGS LX MB E3000V (08M1-04E3000) [BIOS Date: 02/23/11 16:45:13 Ver: V11.0.0]
-(64-0100-000001-00101111-022311-ATHLON64-E3K_X001-Y2KC)
-**GPU:** MSI GeForce 9800 GT (1 GB) (N9800GT-MD1G/PWM)
-**SND:** Realtek ALC888S (HD Audio)
-**OS:** Linux
-**BIOS:** AMIBIOS 8
-**Games:** Speed Driver 4, Speed Rider (replacement PCB), Speed Rider 2, Power Truck, Power Truck Special
 
-### E3100
-Motherboard has no sound or ethernet ports.
-Sound, ethernet, and security chip is stored on a PCIe device.
-Every game has its own individual system BIOS.
+**GPU:** MSI GeForce 9800 GT (1 GB)
+
+**RAM:** 2 x InnoDisk 1 GB DDR2-800 Low Profile DIMM
+
+**Sound**: Realtek ALC888S (HD Audio)
+
+**Storage:** SSD ?
+
+**OS:** Linux, likely LFS
+
+
+## E3100
+**Motherboard:** Advantech EBC-TA17, marked as iTS I-JOIN E3100
+
+**BIOS:** Customized PhoenixBIOS, each game has its own variation of BIOS.
+Currently found BIOS versions are: 
+* E3100_BIOS_DB_V01.1.14-139 (Danz Base)
+* E3100_MESEAT_V01.1.15-139.1 (Monser Eye)
+* E3100_BIOS_OT_V01.1.14-139.1 (Overtake/Overtake DX/UltraRace)
 
-**CPU:** Intel Core i3-3220 (3.20GHz)
-**RAM:**  4 GB DDR3
-**MBD:** Advantech EBC-TA17 (ITS I-JOIN E3100)
-**MBD Variant:** LF-00 (Overtake?), LF-01 (Danz Base / Monster Eye)
 **GPU:** NVIDIA GeForce GTX 750 (1 GB)
-**SND:** Embedded in PCIe board
+
+**RAM:** 4 GB DDR3
+
+**Sound:** C-Media CM6206, embedded on I-JOIN M3000 expansion board
+
+**Storage:** ADLINK 32 GB Industrial SSD, 2.5' SATA, mounted on I-JOIN M2000 expansion board then connects to the motherboard via proprietary 125 PIN connector
+
+**Networking:** ASIX AX88772BLF Ethernet controller embedded on I-JOIN M3000 expansion board
+
 **OS:** Windows Embedded Standard 2009 (32-bit)
-**SSD:** ADLINK 32 GB Industrial SSD (IGS OEM, SSB032GTTC7-SBA-2) (SATA 2.5")
-**BIOS:** PhoenixBIOS
-**Games:** Danz Base, Monster Eye, Overtake, Overtake DX, Ultra Race
 
-**BIOS:** [E3100_BIOS_DB_V01.1.14-139 Date: Apr 8 2014] (Danz Base), [E3100_MESEAT_V01.1.15-139.1 Date:Jun 4 2014] (Monster Eye), [E3100_BIOS_OT_V01.1.14-139.1 Date: Apr 8 2014] (Overtake / Overtake DX / Ultra Race)
-**PCI:** I-JOIN M3000 LI-05
+**Extra:**
+ I-JOIN M3000 expansion board: A strange board that takes 2 PCIe slots (one 16x, on 4x) at once, which handles sound and networking. Also with a IDE-alike socket on it, the functionality is yet to be determined.
+ 
+ I-JOIN M2000 expansion board: Probably some kind of security module, contains FPGA for decrypting the hard disk. Hard disk is mounted on this and then connects to the motherboard via proprietary 125 PIN connector.
 
-*I-JOIN M3000*
-**SND:** C-Media CM6206
-**ETH:** ASIX AX88772BLF
+## S3000
+**Motherboard:** GIGABYTE H110M-S2PV ?
 
-## x3000 series
+**GPU:** Nvidia GeForce GTX 1050 (2 GB), other variations may exist
 
-### S3000
-**CPU:** 
-**RAM:**  
-**MBD:** GIGABYTE H110M-S2PV (?)
-**STH:** 
-**GPU:** Nvidia GeForce GTX 1050 (2 GB) (Transform: Hero of Robots)
-**SND:** 
-**OS:** Windows 10 IoT Embedded LTSB 2016 (Speed Rider 3/Overtake VR/Transform: Hero of Robots) / Linux (Speed Driver 4)
-**Games:** Speed Rider 3, Overtake VR, Transform: Hero of Robots, Speed Driver 4 (replacement PCB)
+**OS:** Windows 10 IoT Embedded LTSB 2016 / LFS Linux (only found in SpeedDriver 4 replacement PCBs)
+
+## V3000
+**Motherboard:** GIGABYTE H110M-S2PV
+
+**GPU:** Nvidia GeForce RTX 2060 Super, other variations may exist
+
+**Sound:** Realtek ALC887 (HD Audio)
 
-### V3000
-**CPU:** 
-**RAM:**  
-**MBD:** GIGABYTE H110M-S2PV
-**STH:** Intel H110
-**GPU:** Nvidia GeForce RTX 2060 Super (Ultra Moto VR, replacement)
-**SND:** Realtek ALC887 (HD Audio)
 **OS:** Windows 10 IoT Embedded LTSB 2016
-**Games:** Speed Driver 5, Ultra Moto VR
\ No newline at end of file
diff --git a/konami/io/e33-jamma-wiring.md b/konami/io/e33-jamma-wiring.md
index 5415c27..143c91c 100644
--- a/konami/io/e33-jamma-wiring.md
+++ b/konami/io/e33-jamma-wiring.md
@@ -99,7 +99,7 @@ The follow hardware is connected on this connector:
  4: NC
  5: Jumper cable (brown) -> Connects to bottom pin 6
  6: NC
- 7: EXT I/O serial (purple)
+ 7: EXT I/O serial TX (purple)
  8: NC
  9: NC
 10: NC
@@ -116,10 +116,10 @@ The follow hardware is connected on this connector:
 21: NC
 22: NC
 23: NC
-24: Lights I/O (yellow-grey)
-25: Lights I/O (light blue)
-26: Lights I/O (grey)
-27: GND (black)
+24: Lights P2 cabinet button lights (yellow-grey)
+25: Lights P1 halo up (light blue)
+26: Lights P2 halo down (grey)
+27: GND for +5V (black)
 28: NC
 ```
 
@@ -132,8 +132,8 @@ The follow hardware is connected on this connector:
  4: NC
  5: NC
  6: Jumper cable (brown) -> Connects to top pin 5
- 7: EXT I/O serial (grey)
- 8: EXT I/O serial (black)
+ 7: EXT I/O serial RX (grey)
+ 8: EXT I/O serial GND (black)
  9: NC
 10: NC
 11: NC
@@ -148,10 +148,10 @@ The follow hardware is connected on this connector:
 20: NC
 21: NC
 22: NC
-23: Lights I/O (purple-grey)
-24: Lights I/O (green)
-25: Lights I/O (purple)
-26: Lights I/O (black)
+23: Lights P1 cabinet button lights (purple-grey)
+24: Lights P2 halo up (green)
+25: Lights P1 halo down (purple)
+26: Lights GND (black)
 27: NC
 28: NC
 ```
@@ -168,14 +168,14 @@ Pintout order: looking at the front of the connector, left to right:
 |-----------------|
 
 1: Earth (yellow-green)
-2: ??? (grey)
-3: ??? (purple)
-4: ??? (light blue)
-5: ??? (green)
-6: ??? (yellow-grey)
-7: ??? (purple-grey)
+2: P2 halo down (grey)
+3: P1 halo down (purple)
+4: P1 halo up (light blue)
+5: P2 halo up (green)
+6: P2 cabinet button lights (yellow-grey)
+7: P1 cabinet button lights (purple-grey)
 8: NC
-9: ??? (black)
+9: GND (black)
 ```
 
 ## EXT I/O serial connector
@@ -190,6 +190,86 @@ Pintout order: looking at the front of the connector, left to right:
 |-----|
 
 1: GND (black)
-2: ??? (purple)
-3: ??? (grey)
+2: TX (purple)
+3: RX (grey)
+```
+
+## Adapter secondary JAMMA connector to "classic" DDR wiring
+
+With the secondary JAMMA connector being propriatary to the Dancing
+Stage Fusion cabinet, you need a "breakout" adapter that splices
+the JAMMA connector into the following separate connectors:
+
+* `EHR-5` connector to COM1 on the PCB for the EXTIO
+* +5V supply, likely via a 2-pin connector that works with your
+  cabinet's internal power infrastructure
+* `XMP-11V` connector to PORT1 on the PCB for lights
+
+Note: Bass lights, P1/P2 pad lights as well as sensor multiplexing
+is handled by the EXTIO board.
+
+### COM1 breakout
+
+Pinout for the `EHR-5` connector breaking out of the JAMMA connector.
+
+Pintout order for `EHR-5`: looking at the front of the connector,
+left to right:
+
+```text
+|         |
+|---------|
+|1 2 3 4 5|
+|---------|
+
+1: GND (black)
+2: NC
+3: NC
+4: RX (grey)
+5: TX (purple)
+```
+
+Mapping for breakout cable:
+
+```text
+JAMMA top: 7     -> EHR-5: 5
+JAMMA bottom: 7  -> EHR-5: 4
+JAMMA bottom: 8  -> EHR-5: 1
+```
+
+### Lights connector breakout
+
+Pinout for the `XMP-11V` connector breaking out of the JAMMA connector.
+
+Pintout order for `XMP-11V`: looking at the front of the connector,
+left to right:
+
+```text
+|          |--|         |
+|-----------------------|
+|1 2 3 4 5 6 7 8 9 10 11|
+|-----------------------|
+
+1: NC
+2: P1 halo up
+3: P1 halo down
+4: P2 halo up
+5: P2 halo down
+6: GND
+7: NC
+8: NC
+9: P2 cabinet button lights
+10: P1 cabinet button lights
+11: GND
+```
+
+Mapping for breakout cable:
+
+```text
+JAMMA top: 24     -> XMP-11V: 9
+JAMMA top: 25     -> XMP-11V: 2
+JAMMA top: 26     -> XMP-11V: 5
+JAMMA bottom: 23  -> XMP-11V: 10
+JAMMA bottom: 24  -> XMP-11V: 4
+JAMMA bottom: 25  -> XMP-11V: 3
+JAMMA bottom: 26  -> XMP-11V: 6 + 11
 ```
diff --git a/sega/media.md b/sega/media.md
index cefedd7..5e10489 100644
--- a/sega/media.md
+++ b/sega/media.md
@@ -750,7 +750,7 @@ DVR-0021  :
 DVR-0022  :
 DVR-0023  :
 DVR-0024  :
-DVR-0025  :
+DVR-0025A : THAT'S PARADICE : RingEdge : JPN : SBVC : v1.01?
 DVR-0026B : SEGA GOLDEN GUN : RingWide : SBVE
 DVR-0027  : セガネットワーク対戦麻雀 MJ5 : RingEdge : JPN : SBVF
         J : ^
@@ -933,7 +933,6 @@ DVR-????  : メダルのガンマン : RingWide : JPN : SBTF
 DVR-????  : すすめ！スゴロケッツ : RingEdge : JPN : SBTH
 DVR-????  : XIYANGYANG : RingWide : CHN : SBVG
 DVR-????  : ??? : JPN : SBUK
-DVR-????  : THAT'S PARADICE : RingEdge : JPN : v1.01
 DVR-????  : Super Monkey Ball : RingWide : SBVJ
 DVR-????  : Initial D Arcade Stage 6 AA : RingEdge : EXP : SBWV
 DVR-????  : LADY LUCK GAME : RingWide : JPN : SBXF